A friend of mine sent me a MMS Message, but i am unable to retrieve it and it keeps turning on my GPRS automatically. So now i have 15 MMS Messages in my inbox which i am unable to view? Anyone have an ideas? He is on T-mobile and i am on O2?
there are two places to configure MMs
1- O2 setting for MMS
2-O2 GPRS for Data connection
1- click on you message on today screen- menu-tools-optionsclick on MMS-servers-click o2 mmsc ( this is No1. setting) after finish make it default.
2- start-setting-connections-conncetions- manage connection make sure is correct setting for o2 wap server. if that comes under my isp you should select my isp in above MMS server setting to connect to.
check setting from here
http://www.filesaveas.com/gprs.html#apn
Related
Hi
Having fun with MMS messages now. If wifi is turned on, neither the send or recieve of an MMS message works. Have to switch off wifi before I can get anywhere! Anyone else suffer this?
Now, having switched off Wifi, I try and download an MMS message and it comes up with a box asking for a password for 'o2wap' this, it gets (the password is 'password' according to O2). It then promptly fails to connect.
In order to send MMS messages, I have to go into the connection settings dialogue and on the advanced tab -> Select Networks option, and change both the 'Internet' and 'Work' boxes to 'MMS Network'.
Then I can send recieve, and afterwards, I have to set them back such that GPRS internet access is again possible, and re-enable wifi.
What a ball ache!!! Should be automatic - user wants to send/recieve MMS, device connects up the right comms profile, gets does the MMS send/recieve, and then resets the comms profile to what it was beforehand!!
Its not rocket science!
Nigel
Hi
I can send MMS, but i con not recive them, just waiting for )2 to get back to me.
Been having probs with MMS recently - can't recieve or send. Same for a friend on O2. Wonder if perhaps O2 has technical issues?
Had thought it was a settings problem following a hard reset, but settings should have synced.
Rogers Canada MMS/SMS/GPRS Settings?
Hi sorry if I sound like a real newbie but I am. I have only used a Blackberry for the last 5 years and nothing else.
I currently have a Blackberry on Rogers in Canada, and will be getting my Dash tomorrow, I will unlock it with imei-check, what else do I need to do in order to have it work like my blackberry, I get my email from a couple pop accounts and my work outlook which does support owa web mail. right now I sync my calendar and contacts with desktop manager.
Is it worth installing BB Connect and just get my emails like on my blackberry or is it better it use the Dash email tools? when using the Dash can I change my reply to address depending on the email account I recieved the email in?
How do I find my rogers settings for MMS/SMS/GPRS??
Thanks for any help! This forum is awesome!
G
Rogers
You should be able to point your ActiveSync server to your OWA server at work. Generally that works just like your BBerry if you enable Push Email (under the comm manager on your dash).
Thanks I tried that, but it won't let me sync to the owa server for some reason, most likely my it guys have blocked it.
I installed BB Connect and it wirks for receiving but I can not send it is greyed out.
here are the settings:
Click Start/Settings/Connections/GPRS
click Menu, choose Add
Description: Rogers WAP
Connect to: wap network
Access point: goam.com
User name: wapuser1
Password: wap
Primary/Secondary DNS: 0.0.0.0 (leave unchanged)
Ip address: 172.025.015.041
When you finish click Done.
Then make another new connection:
Description: Rogers Internet
Connects to: the internet
Access point: internet.com (vpn.com - for those like me who pay extra $10/mth. for real IP address)
User name: wapuser1
Password: wap
Everything under leave blank
After you click Done create one more new connection:
Description: Rogers MMS
Connects to: WAP Network
Access point: media.com
username: media
password: mda01
Pri-dns: leave blank
sec-dns: leave blank
ip address: leave blank
When you finish click Done.
From the connections menu select "Proxy"
Menu/Add
Description: Rogers WAP Proxy
Connects from: The Internet
Connects to: WAP Network
Proxy (name: port): 208.200.067.150:9203
Type: WAP
User name/password leave empty
Click Done.
(Proxy connection is not mandatory - things will work without it too)
Then go to home screen, click Start/Settings/Connections click on Menu select Advanced
Internet connection:
Automatic
Work connection:
Automatic
Wap connection:
Automatic
Secure wap connection:
Automatic
(it may be already like this)
Then launch Messaging (press on that button with the letter)
Select any of the listed accounts, click Menu, choose Options, then select Account Options/MMS.
Put the checkmark on these items:
Retreive Immediately;
Save sent messages (your choice actually);
Allow delivery reports;
Allow read reports.
Set Number of attempts to 2
Put Photo resolution to: QVGA (320*240)
Then click right softbuton "menu" and select MMSC SETTINGS
Again right soft buton - Menu/New
Name: Rogers MMS
MMSC URL: http://mms.gprs.rogers.com/
WAP Gateway: 172.25.0.107
Port: 8080 (or 80 - both worked for me)
Connects via: WAP Network
Max. Sending Size: 250K
WAP Version 2.0
I got this from www.howardforums.com
Thanks very much!!
I've entered all the settings you've listed and have been able to send an MMS, but cannot receive. Any thoughts as to why? It appears that the device won't connect to retrieve any messages.
Cruisin1966 said:
I've entered all the settings you've listed and have been able to send an MMS, but cannot receive. Any thoughts as to why? It appears that the device won't connect to retrieve any messages.
Click to expand...
Click to collapse
It appears the problem was with my SIM card the whole time. I can't receive MMS on any phone, Rogers branded or not. Once I put my wife's SIM int he phone, the normal settings I've been trying worked perfectly the first time.
GPRS usage monitor that works?
Can someone tell of any GPRS usage monitor programs that work on the Excalibur?
Never mind.
I found out that Efficasoft makes a special version for the DASh and some other phones here:
http://www.efficasoft.com/gprsmonitor_w.html
efficasoft
smartphone gprs traffic monitor
ver. 3.51w
I'vwe noticed that even when not having anything coming in, the counter slowly creeps up.
Never mind.
I was reading it wrong. I've only used 1.74Kb.
The other figure was the projected month usage at the current rate.
did anyone managed to get the today plugin working in other homescreens?
when I put it in my homescreen it is always on the very left position on the screen.
Well these are the settings provided by my service provider .. but i dont knw whr to appy this.....????
on my excalibur with wm5
Manual GPRS settings
Settings name Hutch_gprs
Home page http://www.hutchworld.co.in
Session Mode Permanent
Connection security Off
Data bearer GPRS
GPRS access point portalnmms
IP address 10.10.1.100
Authentification type Normal
Login type Automatic
User name <blank>
Password <blank>
just go to setting, connections, and there gprs, select new and follow instructions?
evow said:
just go to setting, connections, and there gprs, select new and follow instructions?
Click to expand...
Click to collapse
after doin this also the gprs is not workin.. is there anythin else i have to do ... to make it work.....
uncheck autodetect setting in ie?
is there an E or so mentioned above in the screen....?
evow said:
uncheck autodetect setting in ie?
is there an E or so mentioned above in the screen....?
Click to expand...
Click to collapse
Sometime it appears n sometime it disappears....
wht should i select wap/work/securewap/internet????
i have the same thing that it appears, and leaves again,
bo worry
Normally you should check internet connection?
my settings with connections:
name : TELENET
connect to : INTERNET
accesoint : internet.be
all the other fields are blank.
settings ie:
uncheck autodetect settings
slect network: the internet
save ; and im connected
i guess that ther must be something wrong with : portalnmms
maybe it is portalnmms.com/or other...
yea a E is on my screen.....
Manual GPRS settings
Settings name Hutch_gprs
Home page http://www.hutchworld.co.in
Session Mode Permanent
Connection security Off
Data bearer GPRS
GPRS access point portalnmms
IP address 10.10.1.100
Authentification type Normal
Login type Automatic
User name <blank>
Password <blank>
and they have mentioned the access point.. also...and selected the internet as my option but still its not workin .... doin a master reset will help in this case...........
ok heres the deal...
i have a 8525 unlocked and super CID on the t-mobile network..
i am using the HTC offical Release of WM6
i have everything set properly on my phone. i have even gone to the extent of calling t-mobile for support but they said i have all my information correct( modem connection and proxy server) i was wondering if anyone else on the t-mobile network is having the same problem.. any feed back or help is appretiated
P.S. The phone DOSE connect to the GPRS network and shows a connection ticker.... seems to time out when downloading MMS/Web content
mee too
Hey there. I am in the same boat. I have the TyTn which i'm using on Tmobile (US). I walked through withe the Tmobile rep and validated all the settings but my MMS still does not work.
My internet and all does. very wierd. any help appreciated.
Thanks,
Abracadabra
Similar problem
I have a Tmobile Wing, and been having this problem for about 4 months now, it works sending mms to other Tmobile customers but not for other carriers. ANy info on this matter would be appreciated.
Thanx, Erros
Hoping I can help All Tmobile Users WIth a TyTn Device Cause I would Shoot Myself if My MMS didn't Work ! lol
I have 2 Working TyTn devices With Working MMS Sending & Recieving.
At this Point I'm Sure From the Fustration lol You have your MMS Settings Memorized lol But Here there are Just in Case....
Server Name : T-Mobile MMS
Gateway : 216.155.165.50 (Tip if you have 216.155.165.050 it Probably will Not Work)
Port Number : 8080
Server Address :http://216.155.174.84/servlets/mms
If you Have this So Far All is Good. After This point I will get into Details Cause this Next Step Can be Tricky......
Connect Via: This is Where it Gets Tricky. From My experience You can Send or Receieve MMS message Successfully through wap.voicestream.com SO ! if you have Internet2.voicestream.com or Internet3.voicestream.com YOU MOST LIKELY WILL NOT RECIEVE or BE ABLE TO SEND MMS.....So Since all of us on T-Mobile Don't have 3G yet(Shut up Cingular Users I Don't wanna Hear it ! ) And There Really isn't Much of a Speed decrease or Increase from Using the Different Internet Connections I would Leave the Internet connection aLways at Wap.Voicestream.com.
If you feel like the Internet Speed is "Faster" on The others or the Other Internet Connections give you More Connectivity Options, You Need to Setup 2 Different Connections for the Internet. One for MMS and One for Your Regular Internet Browsing. This Is Where The Option "Connect Via" Gets Tricky. If you set up The MMS Using Wap.voiceStream.com as a General Internet COnnection you can Set
Connection Via : The Internet
If you Setup 2 Connections , One for MMS And One for Internet you will Name The MMS Connection What ever you Choose for ex. "Tmobile MMS" And then When Setting up the MMS and "Connection Via" option , you WIll Select what ever you called the MMS connection in the Drop Down Menu.
Sending Size Limitations : Sound be Set at Max Depending on What Version of MMS you are Using it'll be anywhere from 300k up to 600k in the Drop Down Menu
Wap Version : Wap 2.0
Hope This has Helped. If anyone Needs More help, clarification or Pix For Help of Setup I'd be More than Happy to. Tmobile is so UNHELPFUL when they Find out you are Using a "Non-Tmobile" Phone. So I"ll Help out as Much as I can.
Here you go!
Here you kids go... this will fix server settings and enable tmobile customers running on custom cooked roms to receive the full size picture (without installing these files, you may be able to get it to work with the proper server settings, but pictures will be downscaled). Heres the ultimate fix
enjoy!
http://forum.xda-developers.com/showthread.php?t=297538&page=5&highlight=tiny+messages (Post #48)
CONFIGURING MY 8525 for TMOBILE
OK!!! Color me STUPID!!! But can you PLEASE help me with showing me WHERE to put these codes to make my phone work!?!? THANKS SO MUCH!!!!
EQUiLiiBRiUM said:
Hoping I can help All Tmobile Users WIth a TyTn Device Cause I would Shoot Myself if My MMS didn't Work ! lol
I have 2 Working TyTn devices With Working MMS Sending & Recieving.
At this Point I'm Sure From the Fustration lol You have your MMS Settings Memorized lol But Here there are Just in Case....
Server Name : T-Mobile MMS
Gateway : 216.155.165.50 (Tip if you have 216.155.165.050 it Probably will Not Work)
Port Number : 8080
Server Address :http://216.155.174.84/servlets/mms
If you Have this So Far All is Good. After This point I will get into Details Cause this Next Step Can be Tricky......
Connect Via: This is Where it Gets Tricky. From My experience You can Send or Receieve MMS message Successfully through wap.voicestream.com SO ! if you have Internet2.voicestream.com or Internet3.voicestream.com YOU MOST LIKELY WILL NOT RECIEVE or BE ABLE TO SEND MMS.....So Since all of us on T-Mobile Don't have 3G yet(Shut up Cingular Users I Don't wanna Hear it ! ) And There Really isn't Much of a Speed decrease or Increase from Using the Different Internet Connections I would Leave the Internet connection aLways at Wap.Voicestream.com.
If you feel like the Internet Speed is "Faster" on The others or the Other Internet Connections give you More Connectivity Options, You Need to Setup 2 Different Connections for the Internet. One for MMS and One for Your Regular Internet Browsing. This Is Where The Option "Connect Via" Gets Tricky. If you set up The MMS Using Wap.voiceStream.com as a General Internet COnnection you can Set
Connection Via : The Internet
If you Setup 2 Connections , One for MMS And One for Internet you will Name The MMS Connection What ever you Choose for ex. "Tmobile MMS" And then When Setting up the MMS and "Connection Via" option , you WIll Select what ever you called the MMS connection in the Drop Down Menu.
Sending Size Limitations : Sound be Set at Max Depending on What Version of MMS you are Using it'll be anywhere from 300k up to 600k in the Drop Down Menu
Wap Version : Wap 2.0
Hope This has Helped. If anyone Needs More help, clarification or Pix For Help of Setup I'd be More than Happy to. Tmobile is so UNHELPFUL when they Find out you are Using a "Non-Tmobile" Phone. So I"ll Help out as Much as I can.
Click to expand...
Click to collapse
hbayliff said:
OK!!! Color me STUPID!!! But can you PLEASE help me with showing me WHERE to put these codes to make my phone work!?!? THANKS SO MUCH!!!!
Click to expand...
Click to collapse
Setting up the MMS profile
1. Tap Start again.
2. Tap Messaging.
3. Tap Menu.
4. Tap MMS Configuration.
5. Tap the Servers tab.
6. Tap New.
7. Enter PictureMessaging in the Server Name field.
8. Enter 216.155.165.50 in the Gateway field.
9. Enter 8080 in the Port number field.
10. Enter http://216.155.174.84/servlets/mms in the Server address field.
11. Tap to select T-Mobile GPRS from the Connect via drop down list.
12. Tap to select WAP 2.0 from the WAP Version dropdown.
13. Tap OK.
14. Scroll to PictureMessaging and tap Set As Default.
15. Tap OK.
The new MMS profile is now configured and ready for use.
Just flashed a cingular sx66 with the 1.42 tmobile Uk rom, and got most of it set up.I got the web2go thingy working with internet2.voicestream.com, and tried to set up the mms to work, and it doesn't, and I don't know why.
I can receive the portion of a message that tells me I have an mms from whoever, and to "mark for download", but when it goes to download, it gives me some error about not being able to retrieve the attatchment, and to try again later. Also, if I attempt to send an mms, I get a similar error about not being able to send.
Anyone have any idea why this is happening?
well what carrier are you using?
and if you're using the same EXT rom as the ukrom, thats very likely why. i've never used MMS since superold plan, but i imagine something is funky with the MMS settings.
I use tmobile usa. And, so far as I know, everything else is in proper working order.
What do you do if you want to send/recieve picture messages?
..messages? i just pop out micrsod and upload them to my site lmfao or email them.
butyeah, if you're using UK settings that may be your problem.
I agree with you..... what settings we are talking about, is the question.
try flashing with a US rom, see if it helps.
The only us rom is cingular.... eh. that's what I just flashed off the device.
or a Himalaya extrom would work too methinks.
I may have just bricked the radio.... dunno. I tried to cover that pin like it says in the wiki (universal's battery problem) and put the battery back in... the device wouldn't power on, so i pulled the battery and tape, and now the unit boots and all, but won't find service. at all.
I'm going to look at flashing the newest radio, and see if that will fix it.
TMO MMS/DATA Setup Web2Go settings
I've had the settings for a while to get MMS and data working. Ialso have the 9.99 web2go (or whatever they are calling it now)
use the following (I only have used these settings with GPRS)
Setup "My ISP"
Name it something (Tmo Internet)
Cellular Line GPRS/3g
access point name is "internet2.voicestream.com"
DONE
setup "My Work Network"
Name it something (Tmo WAP)
Cellular Line GPRS/3g
access point name is "wap.voicestream.com"
DONE
Set up "My Work Network" Proxy
Proxy
216.155.165.50:8080
Go to (for WM2003se)
MMS Inbox
Tools
MMS Config
Servers
Create New and name it something (TmoUS MMS)
MMS Server
gateway 216.155.165.50
port 8080
server address http://mms.msg.eng.t-mobile.com/mms/wapenc
connect via "work network"
300k limit (mine had a max of 100k)
wap2.0
"OK"
Now scroll to your new MMS server, and click "set as default"
DUN DUN DUN
Click to expand...
Click to collapse
The limit in my EnergyROM is currently 300kb but the att limit is 600kb. I know there is a fix, but I can't find it, no matter how much I search.
Could some one link me to it please?
Thanks!
Smith
From the Energy ROM FAQ. Does this answer your question? It should say Sending MMS with AT&T, I'm not sure why he put SMS.
mmalka said:
Sending SMS with AT&T: Run the Carrier Provisioning at Start > Tools, select ATT 2. The download and install this CAB http://forum.xda-developers.com/atta...4&d=1271445465 to adjust the maximum size to 600k.
Click to expand...
Click to collapse
PS: I have never had to install the cab that he mentions and it changes to 600kb automatically. That may be for an older version and they forgot to update the FAQ, not quite sure but I do not believe that part is necessary, just run the carrier provisioning.
mms fix at&t
Please post to links for users to try thanks.
For those who can't receive at&t mms:
I used the PR MMS MediaNet settings tool available on XDA
Go to Settings>Connections>Connections
Delete all data connections before running the tool
Use the device Network Setup Tool to make your primary connection.
Run the PR MediaNet MMS tool to set the size limites
After setting up the connection create a new connection in com manager
Use Work Connection
Use these settings
Connection Cellular GRPS 3G
Name I used MediaNet No Proxy
APN wap.cingular
Username [email protected]
Passwork CINGULAR1
Do not use the proxy settings for this
Have all internet applications go to this connection do that in your com manager
Go into your mms options in messaging click servers click at&t mms make sure MediaNet is still the connection for send/receive mms
now it will send receive mms using the at&t proxy and the internet for other apps without the proxy
how about sending bigger then 600?