Related
Hi everyone.
I have been here a while for info, but I have not been able to find anything.
Maybe you can help me....
I just had my T-Mobile Compact III, before I had a Vario.
On my Vario I made backups with Spb Backup, and instead of selecting PARTIAL restore to my new Compact III (for address and my data), I accidently selected a FULL restore
Now my phone is frozen and will not boot in Windows anymore.
I have tried to flash another ROM into it, even the original one, but it cannot flash this because it is locked.
Then I bought the unlocked code on the web (the 20 pound one www.imei-check.co.uk) but for that to even work I need to have an AS connection.
I cannot get an AS connection because my phone will not boot into Windows anymore
Please can someone advise me on how to get my phone to boot again?
I can get into the bootloader, but I cannot flash it because it is still locked.
Your help is sooo much apprieciated!
Try a hard reset. If it does not work, there is a t mobile uk rom on ftp. d/l and flash to your device.
I have tried to search on this forum for a hard reset, but the only thing I can read is that it has to be done from within the phone itself?
I do not know how to hard reset this type of phone. please advise, so I can try this?
I have found the solution
The two softkeys (with the minus signs) need to be pressed, then softreset.
After that, everything works great!
Thank you.
Later today I will play with my unlock and upgrades.
I love xda-developers website
gianna68 said:
I love xda-developers website
Click to expand...
Click to collapse
Guess we all do.
The info on how to hard reset is on the artemis wiki. I will put more info on there in time. Feel free to add your own info.
gianna68 said:
I have found the solution
Later today I will play with my unlock and upgrades.
I love xda-developers website
Click to expand...
Click to collapse
Can you please confirm if unlocking and ROM upgrading work successfully?
I'm in a similar situation myself.. Gotta change to English..
Half of the time I've got no idea what I'm doing with the Dutch ROM, and this is my first WM device..
Many thanks..
Hi,
I tryed to upgrade to WM6 but I think I tit someting wrong, I flasht my
old WM5 back but now it is not possible to try flashing to WM6.
stuck in new 3.03.0000 bootloader.
I hope somebody can help me, thanks
Theo
are you stuck in bootloader, or were you successful in flashing WM5 ROM? also, please please PLEASE read the threads in this forum before posting. You are the millionth customer to post this issue
Come on guy, if you can write, i suppose that you can read HERE ...
racerx_ said:
are you stuck in bootloader, or were you successful in flashing WM5 ROM? also, please please PLEASE read the threads in this forum before posting. You are the millionth customer to post this issue
Click to expand...
Click to collapse
I was success full in flashing the WM5 rom back on the device, now I am trying to install hard SPL and WM6 as describe on TRINITYGUIDES.INFO but stuck by the start.
Hard SPL will not flash I see on my Red,Green,Blue screen IPL-SSPL, SPL-1.07.ds , yes I am new with this matter an my English is not too well but please.
please state what the problem is when you try to flash
racerx_ said:
please state what the problem is when you try to flash
Click to expand...
Click to collapse
When I start to flash the sync. is oke but when the bootloader screen appears the flashing stops and the PDA is not connected anymore.
Try to launch again your update while you're in bootloader mode...It should work !!
shym said:
Try to launch again your update while you're in bootloader mode...It should work !!
Click to expand...
Click to collapse
I just did it but when my device is in bootloader mode there is now
connection with my notebook (VISTA) anymore. When I restart my
PDA the connection is established.
there is a wiki guide to flashing under vista..
please note, that when you start the updater, and your device goes in to bootloader, it times out. So connection is lost. Simply start the update again, with device still connected in bootloader
racerx_ said:
there is a wiki guide to flashing under vista..
please note, that when you start the updater, and your device goes in to bootloader, it times out. So connection is lost. Simply start the update again, with device still connected in bootloader
Click to expand...
Click to collapse
Yes I did already as you describe the result is still no connection (error).
hmm... i think you're gonna have to use Pof's splxploit to load hard-spl and then flash another ROM from there.
It's a question of whether SPL 3.03 is exploitable in the same way...
theovdb said:
I was success full in flashing the WM5 rom back on the device, now I am trying to install hard SPL and WM6 as describe on TRINITYGUIDES.INFO but stuck by the start.
Hard SPL will not flash I see on my Red,Green,Blue screen IPL-SSPL, SPL-1.07.ds , yes I am new with this matter an my English is not too well but please.
Click to expand...
Click to collapse
you need to use the active sync after you load wm5 ... that's the trick..
Hello,
I have allways start the update twice, Once where the device starts in this 3-Colors boot screen and a second time to start the Flashing process.
Do not tuch the device Just clos update application on Windows PC and restart it and go through the question process until it starts to flash
Hope it helps for you
Robidog
banzro said:
Hello,
I have allways start the update twice, Once where the device starts in this 3-Colors boot screen and a second time to start the Flashing process.
Do not tuch the device Just clos update application on Windows PC and restart it and go through the question process until it starts to flash
Hope it helps for you
Robidog
Click to expand...
Click to collapse
Thanks guys for all your help but the problem still exists, I keep looking
to this forum and hope in time the problem will be solved.
Thanks a lot
theovdb said:
Thanks guys for all your help but the problem still exists, I keep looking
to this forum and hope in time the problem will be solved.
Thanks a lot
Click to expand...
Click to collapse
Hello,
Explain me the Problem a bit more cloaser (step by step what you are doing)
error messages, and also what image you had bevore on it, I need also to know which which version is written on the 3-colored screen...
Look forward to her from you...
stepw said:
It's a question of whether SPL 3.03 is exploitable in the same way...
Click to expand...
Click to collapse
the answer is yes, splxploit works in new bootloader too.
racerx_ said:
the answer is yes, splxploit works in new bootloader too.
Click to expand...
Click to collapse
the answer is no splxploit not works on SPL 3.03 on my device
So what did you do to fix this ??
shym said:
So what did you do to fix this ??
Click to expand...
Click to collapse
On this moment nothing, I did something wrong by flashing the first time
and now I am stuck in SPL 3.03. I think the best what I can do is waiting for
the official rom from HTC.
I have bricked my O2 Stealth due to an incorrect power adapter
So now i cannot enter bootloader mode also
So i have decided to flash the bootloader of the Stealth using JTAG method, but have run into a couple of problems
1. Where do i get the bootloader for O2 XDA Stealth ???
2. What is the JTAG pinout for the stealth ????
I have uploaded a pic of the JTAG points of the motherboard of the Stealth, please help me by sharing you suggestions and experiences.
O2 XDA Stealth JTAG
sirrus_linux said:
I have bricked my O2 Stealth due to an incorrect power adapter
So now i cannot enter bootloader mode also
So i have decided to flash the bootloader of the Stealth using JTAG method, but have run into a couple of problems
1. Where do i get the bootloader for O2 XDA Stealth ???
2. What is the JTAG pinout for the stealth ????
I have uploaded a pic of the JTAG points of the motherboard of the Stealth, please help me by sharing you suggestions and experiences.
Click to expand...
Click to collapse
Hello fellow developers. I am also happy (not) to say that I have bricked my O2 Stealth.
Has anybody been able to make any progress on debricking this phone using the JTAG method? I have two of these phones (one bricked) and I can confirm that on both phones there is evidence of test probing on the contacts marked with red ink shown in the previous post.
If these are the JTAG pins, is there any way of identifying which pin is which by probing with a multimeter and an oscilloscope?
Any help would be greatly appreciated.
Email me to get the bootloder and JTAG pins
[email protected]
I'm too busy to share it to every one
O2 XDA Stealth JTAG pins
Thanks Slimli,
You are a champion !!! The photo of the JTAG pins made all the difference.
I then just simply followed the O2 Dead Boot tutorial that's floating around. I made up my own JTAG connector with odds and ends I found in the garage, and I replaced the EBO_a.nb0 file with the stealth bootloader you had also sent me. I now have Windows Mobile 6.5 running on my phone.
Once again, Thanks Slimli, you are a champion !!!!!!!!!!!
Help...
Hi...if anyone has any methods or files and pics or guides on how to unbrick the XDA Steealth, kindly share.
Or atleast give a link to where these can be downloaded. Email will be good as well.
[email protected]
Thanks in advance.
Stoing said:
Hi...if anyone has any methods or files and pics or guides on how to unbrick the XDA Steealth, kindly share.
Or atleast give a link to where these can be downloaded. Email will be good as well.
[email protected]
Thanks in advance.
Click to expand...
Click to collapse
Please help me too .
[email protected]
My Stealth is alive again
Hello all. Thank you all for helping. My stealth is alive again.
It did take a few tries but in the end.....it all worth it.
Thanks again.
Stoing said:
Hello all. Thank you all for helping. My stealth is alive again.
It did take a few tries but in the end.....it all worth it.
Thanks again.
Click to expand...
Click to collapse
can u tell me how to solved this problem ?
tell me step by step please
Stoing said:
Hello all. Thank you all for helping. My stealth is alive again.
It did take a few tries but in the end.....it all worth it.
Thanks again.
Click to expand...
Click to collapse
Now i have Ebo_a.NB0
and i have H-jtag program and i connect with my stealth via LPT port.
Which address or type to flash this file to my stealth ?
I followed instructions given here:
http://wiki.xda-developers.com/index.php?pagename=DeadBoot
These instructions can also be found here:
http://forum.gsmhosting.com/vbb/showthread.php?t=680669
I used the program in this package:
http://wiki.xda-developers.com/uploads/RepairBootLoader.zip
Replace EBO_a.nb0 given in this package with the Stealth bootloader.
The addresses and flash type are set up in 'start.bat'. They also apply to the Stealth. Open a DOS shell in the same directory as 'start.bat' (which also has 'EBO_a.nb0'), and then at the DOS prompt, type 'run start'. The only tricky part is to get a good contact on the jtag pins. The rest was easy.
thank you
gooday said:
I followed instructions given here:
http://wiki.xda-developers.com/index.php?pagename=DeadBoot
These instructions can also be found here:
http://forum.gsmhosting.com/vbb/showthread.php?t=680669
I used the program in this package:
http://wiki.xda-developers.com/uploads/RepairBootLoader.zip
Replace EBO_a.nb0 given in this package with the Stealth bootloader.
The addresses and flash type are set up in 'start.bat'. They also apply to the Stealth. Open a DOS shell in the same directory as 'start.bat' (which also has 'EBO_a.nb0'), and then at the DOS prompt, type 'run start'. The only tricky part is to get a good contact on the jtag pins. The rest was easy.
Click to expand...
Click to collapse
thank you
Make sure the contacts to the Jtag are done properly........I had to flash a few times to get it right...
Good luck !!
It's work mann!! .
My stealth is comeback .
Thank you .
help me out
hey Stoing, plz help me out with the contact pins for stealth. as i dont know which contact pin is TDI, tdo, tck and tms. plz help me out, thnks in advance.
Please help me I'm having problem with my stealth which I have posted here http://forum.xda-developers.com/showthread.php?t=538234
JTAG for Stealth
Can someone help me to corectly identify JTAG pins for Stealth.
When I am flashing my Stealth, it failed half way.
Now only Lights are blinking.
NEED EXPERT ADVICE
Same with me basha. Please anyone here who can share the correct positions of jtag pins and bootloader of stealth. I emailed slimli, but he does not reply. I think he is busy. Thanks in advance.
Email Add
Give ur email addresses......will forward the emails from Goodday and Slimli
Emai Ad
Here's my email ad: [email protected]. Thanks in advance.
gooday said:
I followed instructions given here:
http://wiki.xda-developers.com/index.php?pagename=DeadBoot
These instructions can also be found here:
http://forum.gsmhosting.com/vbb/showthread.php?t=680669
I used the program in this package:
http://wiki.xda-developers.com/uploads/RepairBootLoader.zip
Replace EBO_a.nb0 given in this package with the Stealth bootloader.
The addresses and flash type are set up in 'start.bat'. They also apply to the Stealth. Open a DOS shell in the same directory as 'start.bat' (which also has 'EBO_a.nb0'), and then at the DOS prompt, type 'run start'. The only tricky part is to get a good contact on the jtag pins. The rest was easy.
Click to expand...
Click to collapse
Follow and
use this file
http://www.tempf.com/getfile.php?id=65730&key=4a765e3f4d563
I cannot get past the start up screen! I have the CDMA diamond used
HSPL057 and attempted to update to SWIFTBL WWE DIAMOND ROM V7.5 (FULL) And now it will not go past the boot up screen!! What can I do?
you installed a GSM rom.
you need to do more reading.
1) Reading would have told you the differences between the devices and would have informed you you need hte correct one for your device.
2) you're not the only one who has done this if you do a search you will find how to recover from this issue.
3) i cant stress enough to read first do later. it helps you prevent situations like this.
Thanks for your help
The instructions said it was for SPRINT CDMA devices, that is what I have- I have searched all through out these posts and cannot find out how to recover from this. Can you please help if you know how?
todaytoo said:
The instructions said it was for SPRINT CDMA devices, that is what I have- I have searched all through out these posts and cannot find out how to recover from this. Can you please help if you know how?
Click to expand...
Click to collapse
Wouldn't believe it would say so. Link us to what you're referring to!
All is not lost..
todaytoo said:
I cannot get past the start up screen! I have the CDMA diamond used
HSPL057 and attempted to update to SWIFTBL WWE DIAMOND ROM V7.5 (FULL) And now it will not go past the boot up screen!! What can I do?
Click to expand...
Click to collapse
Hi todaytoo.
Don't worry if you can get the bootloader screen just re flash a CMDA ROM from these Diamond forums.
(enter Bootloader by pushing the reset button while holding volume down key on the side)
Hope this helps ya out.
Try here for a CDMA ROM. http://forum.xda-developers.com/showthread.php?t=430486
I can get into the bootloader screen
Thank you !!! Once I make it to there, do you know where steps are to fix my problem? I have been searching this fourm for hours before I worked up the courage to ask...or throw this phone at the wall
todaytoo said:
Thank you !!! Once I make it to there, do you know where steps are to fix my problem? I have been searching this fourm for hours before I worked up the courage to ask...or throw this phone at the wall
Click to expand...
Click to collapse
Once in bootloader mode connect to your PC via usb lead, wait for drivers to load, then
run a CDMA ROM.
Which CDMA ROM is best to use
I want to make sure that I chose one that will work this time....please suggest one..and Thank you sooo much!!!!!!!!!
todaytoo said:
I want to make sure that I chose one that will work this time....please suggest one..and Thank you sooo much!!!!!!!!!
Click to expand...
Click to collapse
Please read my above post todaytoo, I listed a CDMA there.
I must be retarded
I read your post, but dont see any CDMA ROM on it...
todaytoo said:
I read your post, but dont see any CDMA ROM on it...
Click to expand...
Click to collapse
I guess your kinda stressed at this point, so here is the line from my post
"Try here for a CDMA ROM. http://forum.xda-developers.com/showthread.php?t=430486"
You are correct!! BIG TIME
Thank you so much for your quick help. I am downloading this right now. So once I download, connect via activesync, run the ROM and I should be back in business?
Nearly there..
todaytoo said:
Thank you so much for your quick help. I am downloading this right now. So once I download, connect via activesync, run the ROM and I should be back in business?
Click to expand...
Click to collapse
Fingers crossed yes...
Read all the posts from the CDMA ROM page to get feedback and questions answered etc, and do a little more research via the "Search this forums" button before posting a query.
I guess we all started as XDA newbie's, so don't worry.
Got to log off now todaytoo.
Best of luck, will catch up on forums tomorrow.
gadjet said:
Fingers crossed yes...
Read all the posts from the CDMA ROM page to get feedback and questions answered etc, and do a little more research via the "Search this forums" button before posting a query.
I guess we all started as XDA newbie's, so don't worry.
Click to expand...
Click to collapse
Just 2 questions I think this was a good example.
Where is the CDMA Rom page?
What ROM exactly did you install? (todaytoo)
ok...its not working
ok, im at the bootload screen...I can connect to active sync. I downloaded the CDMA ROM it came in .rar format I changed to it .exe at when i run the ROM it does not do anything....
ok, now its not connecting to activsync....
Is there a trick that im not doing?
renamed a .rar file to an .exe ...new to computing?
You need to unpack/extract the rar file, just like a zip file.
Use winrar, when extracted all the goodies will be revealed!
/Psudo
wow...dont know where my head was
ok, so i have extracted it correctly....my device will still not conntec to active sync...when i plug it in from the bootscreen it changes to USB but activesync cannot find the device....any suggestions
todaytoo said:
ok, so i have extracted it correctly....my device will still not conntec to active sync...when i plug it in from the bootscreen it changes to USB but activesync cannot find the device....any suggestions
Click to expand...
Click to collapse
Dude, search a bit in the forum for things!!
Hi,
I need your help please. I have desire 820u dual sim, the Taiwanese version.
I have done a factory reset to the mobile and since that it never performed normal.
Most of the time it gets stuck on the boot screen and in rare cases i am able to complete the boot, and even when it boots, it is very slow and hangs at the end.
I am able to enter the recovery and I think the bootloader is unlocked.
I am attaching a screen shot when I am in recover mode
Please help me to restore my phone
Mustafa Kais said:
Hi,
I need your help please. I have desire 820u dual sim, the Taiwanese version.
I have done a factory reset to the mobile and since that it never performed normal.
Most of the time it gets stuck on the boot screen and in rare cases i am able to complete the boot, and even when it boots, it is very slow and hangs at the end.
I am able to enter the recovery and I think the bootloader is unlocked.
I am attaching a screen shot when I am in recover mode
Please help me to restore my phone
Click to expand...
Click to collapse
update pro.
I have the files
soork16 said:
update pro.
Click to expand...
Click to collapse
Hi,
I was able to download both the RUU and the HBOOT files.
Problem resolved after re-installing them.
The bootloader was locked.
If any one wants the files, please let me know to share them.
Would be great if you provide FTP server to upload them.
Thanks,
Mustafa Kais said:
Hi,
I was able to download both the RUU and the HBOOT files.
Problem resolved after re-installing them.
The bootloader was locked.
If any one wants the files, please let me know to share them.
Would be great if you provide FTP server to upload them.
Thanks,
Click to expand...
Click to collapse
I am having the same problem with mine, I will send details for you to upload the files. THANKS!
Please kindly mail me the website addresses
I am badly needed of those
Mustafa Kais said:
Hi,
I was able to download both the RUU and the HBOOT files.
Problem resolved after re-installing them.
The bootloader was locked.
If any one wants the files, please let me know to share them.
Would be great if you provide FTP server to upload them.
Thanks,
Click to expand...
Click to collapse
Mustafa Kais said:
Hi,
I was able to download both the RUU and the HBOOT files.
Problem resolved after re-installing them.
The bootloader was locked.
If any one wants the files, please let me know to share them.
Would be great if you provide FTP server to upload them.
Thanks,
Click to expand...
Click to collapse
can you please upload HBOOT file on drive / google drive / i need it