Related
Hi
I've spent the past few days geeking with my MDA, using the wealth of info from this forum.
I tried the JasJar rom (too much [email protected]), and ended up with:
- XDA CE Rom (1.13.48 )
- Radio From O2 Rom (1.04.02)
- Minimal Stuff from XDA/MDA ext roms
Goal was to install with the least [email protected] possible.
Step 1 - Flashing The XDA Exec Roms
First flash with O2 XDA Rom, using the info available here: http://forum.xda-developers.com/viewtopic.php?t=32725
To sumarise the above...
- Get XDA rom from:
ftp://xda:[email protected]/Uploads/Universal/Shipped ROM/Xda_Exec_LaunchROM_v113139.exe
- Unpack the above using winrar.
- Plonk MaUpgradeUt_noID.exe in the folder where you unpacked the O2 rom (you can get this file from the ftp site, in the file: ftp://xda:[email protected]/Uploads/Universal/JASJAR_WWE_11353_137_10402.rar
You only need the one file!
- Disable activesync
- Put MDA in bootloader mode
- Connect to PC via USB, wait for hardware detection
- Run the file MaUpgradeUt_noID.exe from the O2 Rom directory on the PC
- Wait ;-)
- Once it restarts, do the usual CE setup, but do not let the extended rom install (simply soft reset at the prompt). If you have gotten past this stage, just hard reset again, and do the soft reset at the correct point!
Step 2 - Installing Progs From Extended Rom
- You'll now have an MDA with the XDA CE and Radio roms installed. It will need the appropriate patches installing from the XDA and MDA extended roms.
- To start, DL both extended roms:
XDA:
ftp://xda:[email protected]/Uploads/Universal/Extended ROMs/O2_XDA_Exec_Extended_ROM.zip
MDA:
ftp://xda:[email protected]/Uploads/Universal/Extended ROMs/mda_pro_eng_uk_extrom.zip
- For info on what each of these roms contain, look at the following threads:
MDA: http://forum.xda-developers.com/viewtopic.php?t=32839
XDA: http://forum.xda-developers.com/viewtopic.php?t=32527
- You dont need all that ****e, I installed the following:
XDA:
Signed_SSD_BTUR_Patch_For_BT_Cannot_Initial.sa.CAB (bluetooth patch)
MDA:
CAB-Customization-TMUK-Universal-01-03-04Aug05.CAB (Adds MMS Server Settings)
CAB-Shorcut-TMOENU-08Aug05.CAB (Adds MMS to outlook + installs some shortcuts which you can remove later)
Enable_VT_RTPlugin_0727_2_signed.CAB (Enables Video Calling)
Signed_UNI_TMO_Connection_112100.CAB (Adds 'T-Mobile Internet' and 'T-Mobile Internet CS' for GPRS/3G connection)
Stage 3 - Cleanup
- The CAB CAB-Shorcut-TMOENU-08Aug05.CAB also installs a links. If you dont install the cab TMO_UK_UI_0727_signed.CAB then these will be dead llinks. The 'clearvue pdf' reader is a part of this cab (but if you install it, you'll get all the other sh1te it contains also. I was not interested in the PDF reader, so I just trashed the dead links.
- There are two dead links in Programs (they'll be obvous by their icons. I seem to remember them being 'clearvue PDF' and 'EmailWiz' In Explorer, browse to /windows/start menu/programs and trash them.
- Several shortcuts are installed in /windows/startup. Trash the elatepushservice (I dont know what this does, but I dont appear to be missing anything!), sddeamon (this causes the prompt 'view pics on card' when you insert a card containing jpgs from digicam etc). DONT trash 'poutlook' as otherwise the MMS folders wont appear in pocket outlook.
- Install Pocket Mechanic, and use it to ditch bad registy keys and cleanup the notification que.
- Could also install the ext rom unlocker & Total Commander so that you can shove only the cabs you want into the ext rom (or use the space for somet more useful) See Here: http://forum.xda-developers.com/viewtopic.php?t=33638 (Cheers Buzz!)
Registry Hacks
Goto: http://wiki.xda-developers.com/index.php?pagename=Universal_Registry and pick some registry hacks to install. I did 'keys on today screen', 'disable start menu animation', 'change pocket ie', 'change fonts', 'change glyph cache' and 'change web hardware button' - to 'about:blank'
Goto:
http://forum.xda-developers.com/viewtopic.php?t=33515 and make the suggested changes to the cache settings. I found that this did speed stuff up, but since its only cache settings, it will only speed up stuff the second time you try and do it!
Soft Reset
Install Your Progs
I installed
In Internal Mem
Resco Explorer (+regedit +ftp) to replace the MS sh1te
Resco Pic Viewer (to replace the MS App)
Pocket Informant (case the built in stuff is useless)
Resco Audio Recorder
Resco Pocket Radio
TCMP Media player
Net Remote (to control my HTPC)
SPB GPRS Monitor (from MDA CDROM)
Zimmermann Pocket Hosts (essential for VPN use)
Small menu (so I can ruddy well close open apps!)
IPConfig
Pocket Putty (SSH)
On CF Card
Total Commander (to get to the ext rom)
WiFiFoFum (for free email on the move ;-)
Pocket Mechanic
Concluding
Machine is now both fast, stable and not full of bloat-ware. Have 22MB free storage, and 27MB free program memory.
Main Issue left is the time that machine takes to respond to an incomming call when its switched off. On the original MDA rom, I had 4 rings before machine actually rang. Now I have about 2.5.
Time for sleep! I'll read through this tomorrow and correct any errors...
Nigel
One essential point.
According to the publisher, Pocket Mechanic should not be installed to the SD-card, especially if you intend using any of Pocket Mechanic's functions against the SD-card - could lead to corruption.
Personally, I've installed (and run) many of the applications you've listed as "Internal mem" direct to the SD-card without experiencing any problems.
Great bit of collating, does anyone know if the same can be performed on a M5000? Orange have a habit of needing things on there phone to work correctly. Also does anyone know what the following do on the M5000 ExtRom:
CAB-Customization-OrangeUK-Universal-01-05-15Aug05.CAB
CAB-Shortcut-Orange-19Aug05.CAB
cusTSK.exe
Enable_VT_RTPlugin_0727_2_signed.CAB
Signed_DiscoButton8.sa.CAB
Signed_Orange_SuspendResume.sa.CAB
Signed_Orange_UAString.sa.CAB
Signed_ORUK_Conn.sa.CAB
Signed_ORUK_Customize.sa.CAB
Signed_ORUK_HomeScreenReg.sa.CAB
Signed_ORUK_SoundSetting_USSDAlarm.CAB
Signed_ORUK_Version.sa.CAB
Signed_pIE_Fav.sa.CAB
Signed_SSD_BTUR_Patch_For_BT_Cannot_Initial.sa.CAB
Signed_SSD_Shortcut_WWE.sa.CAB
Signed_SSD_WLanMgr_Orange_Icon_WWE.sa.CAB
Signed_UNI_pIE_View_Set.sa.CAB
UI_Orange_UK_0727.cab
UNI_BrowserPerformance.sa.CAB
UNI_Orange_2G3G_icon.sa.CAB
Would be a great help if someone did or could find out as I could then cherry pick what to install. I can take a guess at a few of them but I would like to be sure
Thanks
Hi
Aye, I have noticed oddities with pocket mechanic on SD card, but only when doing SD card benchmark, defrag etc.
I installed to internal mem cause its faster than SD card rather than any other reason, but I found issues with some resco apps running on the SD card also - specifically resco upgrade failed (could not install downloaded upgrade)
Nigel
veletron said:
Hi
Aye, I have noticed oddities with pocket mechanic on SD card, but only when doing SD card benchmark, defrag etc.
I installed to internal mem cause its faster than SD card rather than any other reason, but I found issues with some resco apps running on the SD card also - specifically resco upgrade failed (could not install downloaded upgrade)
Nigel
Click to expand...
Click to collapse
I can understand Pocket Mechanic objecting when you defrag/benchmark the medium it itself is running from.
Haven't had any problems with Resco, but haven't tried the update facility.
velvetron
I am an o2 uk user... I am asuming you are too..
I see you installed the tmob cabs for interent and 3g connection... does this work on o2 or am i being stupid..
Which should I install please advise
magpie
Re: velvetron
magpie2000k said:
I am an o2 uk user... I am asuming you are too..
Click to expand...
Click to collapse
Nope I am a t-mob user. If you are with O2 then you wont be wanting to install stuff from the T-mob ext rom!!
Nigel
want to change dopod 900 (chinese rom) to o2 exec rom
is it feasible?can thr be any incompatibility?
where can I find JASJAR_WWE_11353_137_10402.rar ?
Hi,
I am gathering the files to perform the upgrade as detailed in this thread, however I can't seem to find JASJAR_WWE_11353_137_10402.rar.
Is there a better one to use now ? or should I keep searching for JASJAR_WWE_11353_137_10402.rar ?
In fact most of the links have moved ...
Thanks
Morituri said:
Great bit of collating, does anyone know if the same can be performed on a M5000? Orange have a habit of needing things on there phone to work correctly. Also does anyone know what the following do on the M5000 ExtRom:
CAB-Customization-OrangeUK-Universal-01-05-15Aug05.CAB
CAB-Shortcut-Orange-19Aug05.CAB
cusTSK.exe
Enable_VT_RTPlugin_0727_2_signed.CAB
Signed_DiscoButton8.sa.CAB
Signed_Orange_SuspendResume.sa.CAB
Signed_Orange_UAString.sa.CAB
Signed_ORUK_Conn.sa.CAB
Signed_ORUK_Customize.sa.CAB
Signed_ORUK_HomeScreenReg.sa.CAB
Signed_ORUK_SoundSetting_USSDAlarm.CAB
Signed_ORUK_Version.sa.CAB
Signed_pIE_Fav.sa.CAB
Signed_SSD_BTUR_Patch_For_BT_Cannot_Initial.sa.CAB
Signed_SSD_Shortcut_WWE.sa.CAB
Signed_SSD_WLanMgr_Orange_Icon_WWE.sa.CAB
Signed_UNI_pIE_View_Set.sa.CAB
UI_Orange_UK_0727.cab
UNI_BrowserPerformance.sa.CAB
UNI_Orange_2G3G_icon.sa.CAB
Would be a great help if someone did or could find out as I could then cherry pick what to install. I can take a guess at a few of them but I would like to be sure
Thanks
Click to expand...
Click to collapse
Can you dump your extended rom and post on the ftp site?
I've tried installing the french version, but the UI won't install. Most odd...
I can't find the ROMS
I keep getting :
File not found
You tried to access the address ftp://[email protected]/Universal/Extended ROMs/, which is currently unavailable. Please make sure that the Web address (URL) is correctly spelled and punctuated, then try reloading the page.
Can any one point me in the right direction ?
I have a T Mobile (UK) MDA PRO, the wifi connection lasts for about 3 seconds, then it keeps trying, but failing.
These are the ROMs I'm after :
XDA:
ftp://xda:[email protected]/Uploads/Universal/Extended ROMs/O2_XDA_Exec_Extended_ROM.zip
MDA:
ftp://xda:[email protected]/Uploads/Universal/Extended ROMs/mda_pro_eng_uk_extrom.zip
Thanks
Hi
Looks like someone has trashed the FTP site (again) all those roms have dissapeared. Hopefully they'll get restored... Did a backup exist??!
I'll search my laptop see if I have any of the missing roms
Nigel
Yup the FTP's missing practically every file...
I need the NO ID upgrade launcher file to flash my MDA Pro to XDA Exec please.
If anyone can upload it or send it me accross msn it'd be much appreciated
take a look at the last post :
http://forum.xda-developers.com/viewtopic.php?t=35123&highlight=
Morituri said:
Great bit of collating, does anyone know if the same can be performed on a M5000? Orange have a habit of needing things on there phone to work correctly. Also does anyone know what the following do on the M5000 ExtRom:
CAB-Customization-OrangeUK-Universal-01-05-15Aug05.CAB
CAB-Shortcut-Orange-19Aug05.CAB
cusTSK.exe
Enable_VT_RTPlugin_0727_2_signed.CAB
Signed_DiscoButton8.sa.CAB
Signed_Orange_SuspendResume.sa.CAB
Signed_Orange_UAString.sa.CAB
Signed_ORUK_Conn.sa.CAB
Signed_ORUK_Customize.sa.CAB
Signed_ORUK_HomeScreenReg.sa.CAB
Signed_ORUK_SoundSetting_USSDAlarm.CAB
Signed_ORUK_Version.sa.CAB
Signed_pIE_Fav.sa.CAB
Signed_SSD_BTUR_Patch_For_BT_Cannot_Initial.sa.CAB
Signed_SSD_Shortcut_WWE.sa.CAB
Signed_SSD_WLanMgr_Orange_Icon_WWE.sa.CAB
Signed_UNI_pIE_View_Set.sa.CAB
UI_Orange_UK_0727.cab
UNI_BrowserPerformance.sa.CAB
UNI_Orange_2G3G_icon.sa.CAB
Would be a great help if someone did or could find out as I could then cherry pick what to install. I can take a guess at a few of them but I would like to be sure
Thanks
Click to expand...
Click to collapse
This is all I've worked out so far:
Signed_ORUK_Customize.sa.CAB
sets orange wap homepage
Signed_DiscoButton8.sa.CAB
GPRS disconnect button
Enable_VT_RTPlugin_0727_2_signed.CAB
Ringtone plugin, phone skin
UI_Orange_UK_0727.cab
The orange plugin on today screen???
Mat
Also, if anyone would like it - you are free to download contents of Orange M5000 extended ROM from my website:
www.compsoc.man.ac.uk/~matsmith/bobs/orange.zip
Hi...this mine "ExtROM"........I'm use it w/ my last WM6 ROM (based on LVSW's v2.0.1.1)....however i think that it should work on any rom (wm5 too...)
Its "particular".....I have inserted some useful programs BUT...nothing are installed (alias, copied to the device)!!...everything are alredy "installed" to extrom....
I'm created it for me....so, maybe its unuseful for everybody.....
Whatsuppen:
U download this archive.........................ok
Install it as a normal rom-update (HardSPL included).............ok
So....now, after an HardReset, when the "Customization" popup appears, ONLY some shortcuts will be copied into your device (20 kb), and a few registry tweaks will be also installed (1/2 kb)...........but when you'll enter in the "Programs" directory these programs will be present:
WMP Playlist Editor
PocketRAR v3.60
AltTab (from PocketPlus)
Adobe Reader LE
VJOkButton ("JustClick" only, i'm associate it to a button...)
Spb Full Screen Keyboard (not configurable...u can access to it only from "programs" menu's icon) U
IM+ v4.41 (without Today's PlugIn) U
Chronos v3.3 U
Resco Explorer v6.10 + FTP AddOn + ZIP AddOn (without regitry addOn/cript service/today plugIn) U
Resco Photo Viewer Standard v6.33 (without video support) U
SafeMode v2.1 U
SKTools Pro v3.1.9 (only the main program) U
GroupSMS
PIM Backup v2.5
NoData
iContact v0.2 (linked to the "Contacts" icon in Programs folder)
Call Firewall v1.2
CorePlayer v1.1.1 build 1600 (without SPB-support plugin) U
Some settings for these programs
Click to expand...
Click to collapse
Note:
U = ...unregistred!
Conclusion:
10mb of (useful) programs, but only 20kb of device's memory is used!
(update: 11/08/2007)
Tnks to volospin!
ax3l.volospin.com
MIRRORs: (Tnks to DeviLduck!)
http://www.live-share.com/files/252901/ExtROM_Plus_2.0.9.8.rar.html
...or
http://rapidshare.com/files/48320322/ExtROM_Plus_2.0.9.8.rar
Click to expand...
Click to collapse
this extRom, overrite all on original Ext?
psxsnake said:
this extRom, overrite all on original Ext?
Click to expand...
Click to collapse
yes.......
Can you share with us how to do it? Thanks!
Doesn't work with bepe's rom.
...works perfectly w/ any LVSW and mUn ROMs!
ExtRom Plus
this ExtRom working on my Pepes Germany Rom..
Hello AX3L. Is there any way to get this to work with other programs?
Sorry, I followed all your instructions and I can't see anything new after ExtROM_Plus installed.
Moreover, I can't access ExtROM anywhere.
Customisation process seems not to work with ExtROM area ...
Where can I check if all was installed fine ?
You need to go to the wiki and find the cab which will unhide the extROM for you. Then in the extROM folder click shortcuts
heltem said:
Sorry, I followed all your instructions and I can't see anything new after ExtROM_Plus installed.
Moreover, I can't access ExtROM anywhere.
Customisation process seems not to work with ExtROM area ...
Where can I check if all was installed fine ?
Click to expand...
Click to collapse
follow the skaramanga's procedure or HARD-Reset your device to start the "Customitation Process"
can you upload to some other site than megaupload and rapidshare?
varma_in_ap said:
can you upload to some other site than megaupload and rapidshare?
Click to expand...
Click to collapse
Where is the rapidshare link?
AX3L, I would like to add some programs to the rom befor installing it, can you give us a guide, and tool as needed?
thanks
...i suggest to intall in to your device and then analize!
I have collected the .cab of my preferites program, unpacked, compress the exe using UPX, edited the registry of each program, make the shortcuts from \Extended_ROM to StartMenu, packed all shortcuts and registry to a proper .cab and edited the config.txt to install it!
Finally a I merged all file into an .nb using a tool named "HTC ExtRom Editor" (u can find around the forum), and using NBHGen i have conerted it to .nbh.....ready to flash!
Forward Message
AX3L said:
...i suggest to intall in to your device and then analize!
I have collected the .cab of my preferites program, unpacked, compress the exe using UPX, edited the registry of each program, make the shortcuts from \Extended_ROM to StartMenu, packed all shortcuts and registry to a proper .cab and edited the config.txt to install it!
Finally a I merged all file into an .nb using a tool named "HTC ExtRom Editor" (u can find around the forum), and using NBHGen i have conerted it to .nbh.....ready to flash!
Forward Message
Click to expand...
Click to collapse
I was just wondering, how did you create the shortcuts into a cab file? I cannot seem to find your shortcuts.cab only shortcuts.cabtxt? I take it your shortcuts / registry settings are in shourtcuts.cabtxt? How did you create this file?
Also I cannot find your HSDPA /enable line in your config ?
Can ~WinCE Cab Manager create the shortcut/regedit cabs?
Nice Ext rom AX3L!
Could you possibly add the Resco Explorer Registry Add-in to the next one?
Then it would be perfect!
(update: 24/06/2007)
http://sithtech.net/ROMs/ExtROM_Plus 2.0.5.rar[/QUOTE]
am i blind or is there a download on this link?
please confirm my sanity
HI ax3l,
firstly thanks for your input and time, running sweeeetly.
maybe there are different chips for gps though as my m700 only has 'external gps' button??
also ref to your external rom
http://sithtech.net/ROMs/ExtROM_Plus 2.0.5.rar
have tried to use this link but cannot, please put me out of my misery and check it for me.
regards
martin
I'm plaing in cooking my ROM for trinity
I start from original DOPOD SEA wm6 ROM and merge with ORIGINAL WM6 Artemis ROM.
It's seems to work very fine, but afther change something in XIP (for update OS build and implementes big storage) it appeareads one error.
The [ok button] of phone settings don't work anymore.
If i change the XIP folder with the original one from dopod ROM the Ok button works but doesn't run the conifg.txt at startup.
How can I solve?
Sorry for my bad english.
What do you mean config.txt? Is it the one in OEMOperator right? if yes that one for install some cab after hard reset you need tha file name mxipupdate_zzPIED_101.provxml to be in your rom...
I tried to do as the same as u did but just got xip port and I got a question about merge rom.. do we have to use all sys folder from the rom we want to merge, right? and also which part in OEM folder... Just OEMDriver and OEMAPP, isn't it?
Hi guys,
First, sorry for my bad english.
I'd like to put a cab file in my HTC Universal's extended rom.
This cab file is a video application that works if manually installed on the device.
I've successfully integrated this cab into the extended rom: after a hard reset, i can see this cab file being installed.
But after the first reboot, the application is not installed...
Please help me!!
khamkham said:
Hi guys,
First, sorry for my bad english.
I'd like to put a cab file in my HTC Universal's extended rom.
This cab file is a video application that works if manually installed on the device.
I've successfully integrated this cab into the extended rom: after a hard reset, i can see this cab file being installed.
But after the first reboot, the application is not installed...
Please help me!!
Click to expand...
Click to collapse
In extended rom, i have integrated my cab file and modified the config.txt file
Thx
Can anyone post the program to unlock the extended rom for wm6. My for wm5 isn't working thanks
i just found the solution:
i put Cert_SPCS.cab in the extended rom and unsigned CAB can be installed!!
michd43: for wm6, you just need a registry editor and modify 2 values, so you can view and modify the extended rom.
First of all I'm sorry for my english, hope you can understand me...
I'm going to cook my first ROM...
The idea is to make 2 versions (with/without manila) of a clean "uc capable" rom; what I want to do is take a 1.93 official base and update some oem app and sys (i.e. htc camera and netcf) and remove some others to replace theese with 3t part usefully app (i.e. putting in wktask manager instead htc task).
Now my doubts:
(I've readed a lot of wikies and thread but didn't find a CLEAR answer to all my questions)
1- If I use an official .exe rom as base I obiouvsly find inside it the radio part...have to remove this befor but in base folder due i don't need it for my work? How?
2- I'm able to remove oem pack from my rom base and I'm also able to repack new ones starting from a cab file...but I don't know if it's possible to take (exactly as they are) some oem pack from a stock/custom(when not protected) rom to use in mine...I saw that a lot of cookers use oem pack taken from raphael official roms to update thair roms and I would know if the process to do this is just open the rom, copy the oem and past it in mine... In this case...where can I find a good very update raphael rom?!
3- Opposite than this, for manila I would use the "animated switches" version. I want to downgrade it to the version with theese animations but I don't know if there's a particular process to replace this oem...can you tell me? PS: what is the exact manila version I need to do it?
4- TO UPDATE NETCF TO THE 3.5 VERSION WHAT HAVE I EXACTLY DO? And is the Alexandre's oem pack good for my pourpose?
Thank you a lot and sorry if (maybe) some questions were answered in other threads...I searched and readed a lot but there are too many informations in this forum for a noob/bad english speaker/... like me so I decided to ask!
GriFolle said:
First of all I'm sorry for my english, hope you can understand me...
I'm going to cook my first ROM...
The idea is to make 2 versions (with/without manila) of a clean "uc capable" rom; what I want to do is take a 1.93 official base and update some oem app and sys (i.e. htc camera and netcf) and remove some others to replace theese with 3t part usefully app (i.e. putting in wktask manager instead htc task).
Now my doubts:
(I've readed a lot of wikies and thread but didn't find a CLEAR answer to all my questions)
1- If I use an official .exe rom as base I obiouvsly find inside it the radio part...have to remove this befor but in base folder due i don't need it for my work? How?
2- I'm able to remove oem pack from my rom base and I'm also able to repack new ones starting from a cab file...but I don't know if it's possible to take (exactly as they are) some oem pack from a stock/custom(when not protected) rom to use in mine...I saw that a lot of cookers use oem pack taken from raphael official roms to update thair roms and I would know if the process to do this is just open the rom, copy the oem and past it in mine... In this case...where can I find a good very update raphael rom?!
3- Opposite than this, for manila I would use the "animated switches" version. I want to downgrade it to the version with theese animations but I don't know if there's a particular process to replace this oem...can you tell me? PS: what is the exact manila version I need to do it?
4- TO UPDATE NETCF TO THE 3.5 VERSION WHAT HAVE I EXACTLY DO? And is the Alexandre's oem pack good for my pourpose?
Thank you a lot and sorry if (maybe) some questions were answered in other threads...I searched and readed a lot but there are too many informations in this forum for a noob/bad english speaker/... like me so I decided to ask!
Click to expand...
Click to collapse
1. When dumping a ROM, it will dump separately the splashes, radio, os and extrom (if any.) Extract the exe with WinRAR and dump the nbh.
2. When dumping a ROM, it will create packages if ROM is unprotected. A good place of finding a Raph ROM would be the Raphael forums.
3. Delete the old package from kitchen and replace with new one (in your case, the old one, animated).
4. You can find ready made NetCF 3.5 packages. You should delete the old NetCF 2 from SYS folder and replace it with the 3.5
tnyynt said:
1. When dumping a ROM, it will dump separately the splashes, radio, os and extrom (if any.) Extract the exe with WinRAR and dump the nbh.
2. When dumping a ROM, it will create packages if ROM is unprotected. A good place of finding a Raph ROM would be the Raphael forums.
3. Delete the old package from kitchen and replace with new one (in your case, the old one, animated).
4. You can find ready made NetCF 3.5 packages. You should delete the old NetCF 2 from SYS folder and replace it with the 3.5
Click to expand...
Click to collapse
Thanks a lot!
So, to replace OEM, just put out (from a rom) and put in (in mine)...so simple?!
Ahahah...
Please, excuse me for my stupidity...BUT I REALLY NEED AN HELP!!!
(I'm following this guide: http://forum.xda-developers.com/showthread.php?t=413782&highlight=kitchen)
Here's what I do:
1) I've downloaded from htc site the last official stock rom (localized for my country) \HTC Touch Diamond\QMR\RUU_Diamond_HTC_ITA_1.93.408.3_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
2) I've extracted all files and putted them into Base ROM folder of surface kitchen.
3) clicked on begin and obtained some folders in the kitchwen one
Now if I go into one package folders in OEM (htc gesture in example) i can't see dsm or rgu files, but just dll and .provxml ones...WHY?! I don't think it's good, right? Where is my fault?!
SO SAD...
PS: I've searched a lot but I've not found a netcf prepared package to cook...
Thanks a lot!
GriFolle said:
Please, excuse me for my stupidity...BUT I REALLY NEED AN HELP!!!
(I'm following this guide: http://forum.xda-developers.com/showthread.php?t=413782&highlight=kitchen)
Here's what I do:
1) I've downloaded from htc site the last official stock rom (localized for my country) \HTC Touch Diamond\QMR\RUU_Diamond_HTC_ITA_1.93.408.3_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
2) I've extracted all files and putted them into Base ROM folder of surface kitchen.
3) clicked on begin and obtained some folders in the kitchwen one
Now if I go into one package folders in OEM (htc gesture in example) i can't see dsm or rgu files, but just dll and .provxml ones...WHY?! I don't think it's good, right? Where is my fault?!
SO SAD...
PS: I've searched a lot but I've not found a netcf prepared package to cook...
Thanks a lot!
Click to expand...
Click to collapse
You have to create the packages!
Don't know the kitchen but it should be like this in every kitchen.
Also, you can check inside provxml file (notepad will do), maybe the rgu (registry entries) are set through provisioning.
tnyynt said:
You have to create the packages!
Don't know the kitchen but it should be like this in every kitchen.
Also, you can check inside provxml file (notepad will do), maybe the rgu (registry entries) are set through provisioning.
Click to expand...
Click to collapse
confused...
I think I have to create just the packages of apps I would to add...not even all the apps contained in the stock rom!
Looking and reading tutorials in this forum I understood that If I would (i.e.) add/rmv apps to my rom I've just to put its files in base rom and then (after extract all) add/remove what I want. Then rebuild.
But for all others teorically I don't do anything...Is this wrong?
PS: thank you for the previous reply