Develop Bugs

T-Mobile MDA Mail

Hello I´m from Germany and since yesterday i have an T-Mobile MDA Mail.
Link:http://www.t-mobile.de/shop/handy/0,4855,2963-_6361-0-1-0,00.html
The device seems to be an HTC S620 (aka T-Mobile DASH (USA) or O2 Cosmo).
But there´s a strange thing !! In the Comm-Manager i can´t activate the WiFi.
There´s no point to click.
I think that T-Mobile Germany has modified the device because also in the booklet there is no pointwhich describes how to activate it.
2 Weeks before the MDA MAIL was launched on the website they said that the MDA is WiFi capable...now nothing like that.
On the whole internet (German sites) they say: Yes the device ist WiFi capable !
I looked up some files in the ROM and in the registry. You can find files and Registry entries which show that the MDA is capable of WiFi. (Wifilinit.exe ...).
I thine the device driver is not loaded or is not installed ?! Is there any hack how to get access on it ?!?!

Strange. I looked at the page you mentioned and i could not find anything about wifi when i translated it with babelfish. Was it advertised as having wifi? (box or anything?) would they lock out wifi on purpose?
For others that know more, if they did for some reason disable the wifi. Could he just flash it to one of the generic htc firmwares to enable it again? (after the cid unlock or whatever?)

could you post your homescreen by default the homescreen has a wifi plugin so that should be a sign if it come with it or not!

Strange. I looked at the page you mentioned and i could not find anything about wifi when i translated it with babelfish. Was it advertised as having wifi? (box or anything?) would they lock out wifi on purpose?
Click to expand...
Click to collapse
Ist was advertised 2 weeks before release WITH wifi.
Now it is like you said: Neither on the website nor on the box there´s anything about wifi.
could you post your homescreen by default the homescreen has a wifi plugin so that should be a sign if it come with it or not!
Click to expand...
Click to collapse
I can do so, but i now how the WiFi plugin looks....and it isn´t there.
Like I postet before: In the registry and in the ROM there are entries and files about wifi. On the bootloader the Device says: Excalibur 1.18.0.0 (or similar to it: 1.18. is secure).
This device IS an Excalibur and i think that it has the wifi chip inside. IMHO T-Mobile Germany has deleted the driver from the rom. Here on my computer I have an ROM from the T-Mobile DASH but i can´t flash it because first of all i have no copy of mine (anyone knows how to backup ???) and then i don´t wanto to pay 38$ to unlock the CID.
I don´t need WiFi but it is nice gadget. If it is possible with another ROM I will flash it...but i will wait until someone releases an CID patch without paying 38 bucks for it !

It's weird the stock rom doesn't have WIFI in the comm manager, but you should be able to add it, if the wifi chips there.
Here's how you add wifi to Comm. Manager:
1st make sure your phone is app unlocked.
Using a registry editor, go to: HKLM/SOFTWARE/HTC/CommManager/#
Insert a new string named: WLAN
(The # you choose has to do with the order it shows up on the comm manager page)

You don't need to CID unlock your Excalibur to change the ROM when you first intall the "Engineering"-SPL 1.11 that you find here
or here
But the other thing is to backup the existing ROM.
I have searched all night here but I only have found how to dump the ROM with itsme's tool bkondisk.exe but not how to get it back on the Excalibur.
I also have found the nbhextract, where I can extract things from an .nbh file.
But I did not find how to create a .nbh (or a RUU....exe) file to get the (modified) ROM back to the phone.
Am I blind? Please could somebody point me to the right direction - thx
rope

You don't need to CID unlock your Excalibur to change the ROM when you first intall the "Engineering"-SPL 1.11 that you find here
or here
Click to expand...
Click to collapse
I´ve tried this, but when I try to flash the Bootloader the same thing happens: VENDER ID error

It's weird the stock rom doesn't have WIFI in the comm manager, but you should be able to add it, if the wifi chips there.
Here's how you add wifi to Comm. Manager:
1st make sure your phone is app unlocked.
Using a registry editor, go to: HKLM/SOFTWARE/HTC/CommManager/#
Insert a new string named: WLAN
(The # you choose has to do with the order it shows up on the comm manager page)
Reply With Quote
Click to expand...
Click to collapse
The WiFi is now in the Comm-Manager but it says: Driver is not Loaded.
Where is the key to load the driver ??!?!

Babbels said:
The WiFi is now in the Comm-Manager but it says: Driver is not Loaded.
Where is the key to load the driver ??!?!
Click to expand...
Click to collapse
what a pitty, your phone has no WIFI hardware. you can see the Eingenschaft of your phone on the tmobile web, the phone does not have any funktion of wifi but only gprs and bt.

you can see the Eingenschaft of your phone on the tmobile web,
Click to expand...
Click to collapse
I know what is on the T-Mobile Website...but I think that T-Mobile only has unloaded the driver, or didn´t install it in the rom.

hey bro this is about sharing?
Babbels said:
I know what is on the T-Mobile Website...but I think that T-Mobile only has unloaded the driver, or didn´t install it in the rom.
Click to expand...
Click to collapse
you are doing fine getting all the info you need for your mda mail but have not had the consideration to share what comes with your mda mail instead of just nagging about your problems,stop being selfish ,gives us some info about this new version of the htc excalibur,this site works bot ways not just to leach info!!!!!!!!!!

got my hands on the wm5 wifi driver cab to install but will not share with members who only like to leach!

I don´t have any infos.
The only thing i can tell you are some ROM infos:
OSVersion: 5.1.461 (Build 15671.3.3.0) -> Think this is AKU3.3
Radiorversion: 4.1.13.33_02.77.90.
ROM. 1.18.00
I´m not an export regarding mobile devices.
Tell me what you want to know and i´ll try to get the infos from the device

leoiden said:
got my hands on the wm5 wifi driver cab to install but will not share with members who only like to leach!
Click to expand...
Click to collapse
Not very nice.....

how about go to your settings homescreen and gives us details on whats included like the schemes an any homescreen plugin and also what are the oem sounds that come with it that we might not have ?

I don´t need YOUR (leoiden) help anymore...i´ve unlocked the CID vwith imei-check.co.uk and flashed the MDA with the ROM from the T-Mobile DASH.
The WiFi Chip isn´t in the phone because also with this rom the device shows: Driver not loaded !

just to clarify...
You successfully installed a US based ROM and no WiFi?
WTF?!
-Mc

YES !
The Wifi apears in the Comm-Manager but when I try to activate it ...the device loads for 5 or 6 seconds and then nothing happens. When you look in the Wifi-settings --> connection Status it says: Driver ist not loaded !

wow. Just can't believe that HTC removed the hardware. It's not their style. Usually it's just turned off in the FW and able to wake it back up with a different FW.
I'd take it back and get the s620 then. WiFi makes this device...

I don´t need the WiFi ..it would have been a nice gadget.

WM6 compatible wif bbconnect

Hello there guys.
I got some version of Windows Mobile 5 on my phone working with BB Connect but was wondering if any1 released WM6 working wif BB Connect yet ???
Apologise now if this has been asked b4 but cudnt find anything.

kame1986 said:
Hello there guys.
I got some version of Windows Mobile 5 on my phone working with BB Connect but was wondering if any1 released WM6 working wif BB Connect yet ???
Apologise now if this has been asked b4 but cudnt find anything.
Click to expand...
Click to collapse
Try searching with a google advanced search - limiting your results to http://forum.xda-developers.com
Try say "BBconnect Trinity" or "Blackberry Trinity".
It's there I promise.

If its there plz point me in the rite direction. wud appreciated muchly !
will also search though.

For KAME1986
Hello,
I have just finish to upload the .cab on rapidshare.
http://rapidshare.com/files/50855639/bbconnect_wm6_pro_4.0.0.90.cab.html
Enjoy.
Private69.
@++++

could you upload not in Rapid pls..
thx

Finally i have a steady WM6 version with works with BBConnect !!
Thx

try this...working on my trin
try the steps here to get bbconnect working.
http://www.sems.org/entry.asp?ENTRY_ID=276
Graytraveler, try .84, 90 did not work for me with a stock Tytn II, but 84 did. Or I used Dutty's latest ROM from Xda-developers.com and .92 worked fine with that.
Hchickers, you can try this:
1. Hard reset.
2. Change device ID, from Start -> Settings -> System -> About -> Device ID to HTC_P3450
3. Install a registry editor, such as Resco (www.resco-net.com) or Total Commander (www.ghisler.com, I use 2.5 beta 3). Then edit
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .0.4.2
Then soft reset and install Blackberry Connect. This method worked for some people (they weren't using 750, but still). It might work for you as well.
Click to expand...
Click to collapse
even if this isn't any help for people getting started with BBC on there trins, all new BBC updates get posted there.
p.s. If u dont have bb service from your network before!!, then bbc will never work.

internal GPS stopped working with P3300

Hey I've just install WM6 on my HTC P3300 and the GPS stopped working at all and navigation software doesn't even know that there is internal GPS what can I do ? (I dont reall care if I have to downgrade to WM5 just tell me HOW) Thank You guys !!!

dor515 said:
Hey I've just install WM6 on my HTC P3300 and the GPS stopped working at all and navigation software doesn't even know that there is internal GPS what can I do ? (I dont reall care if I have to downgrade to WM5 just tell me HOW) Thank You guys !!!
Click to expand...
Click to collapse
Hi! tell us more about: - which country did you buy your P3300
- which ROM did you install

I have WM6 and Ibought it on the US

dor515 said:
I have WM6 and Ibought it on the US
Click to expand...
Click to collapse
Ok did you read the howto flash a ROM on ARTEMIS?
If yes you probably saw a line that told you to flash twice your P3300.
It often resolve flashing problems. GPS usually use COM4
You can test with free GPS software or with Navio software.

COM Ports
I may be wrong but I seem to have a vague recollection that in the US, the original ROMs use COM9 for GPS (can anyone confirm?). Flashing to a new rom will have changed this to COM4 so you may just need to reconfigure your GPS settings in the individual applications.

Hey thank you for a quick response but i followed the rulles how to install and its still not working after many times please i you can send me a link with the Windows mobile 5 so i will try to reinstall the original WM that came with the phone thanks anyway

dor515 said:
Hey thank you for a quick response but i followed the rulles how to install and its still not working after many times please i you can send me a link with the Windows mobile 5 so i will try to reinstall the original WM that came with the phone thanks anyway
Click to expand...
Click to collapse
Official HTC WWE WM6 SHOULD work with any P3300, that couln't be yours that is not possible to run GPS part.

There is an ARTEMIS or HTC P3300 model that have no GPS inside ? or I've just misinterpret what you said maybe you can give me a link with a refresh WM5 software the will surely work with mine ?

dor515 said:
There is an ARTEMIS or HTC P3300 model that have no GPS inside ? or I've just misinterpret what you said maybe you can give me a link with a refresh WM5 software the will surely work with mine ?
Click to expand...
Click to collapse
No, All HTC P3300 have got a GPS inside (it remember M$ pub ) only some P3300 haven't got Wifi inside.
You should forget about WM5. I said that I am pretty sure WM6 should work with your GPS.
I can give you a WM5 but it is French orange switzerland version
Was your Wm6 an original HTC WWE version?

NO its a custom something (I dont know) but for sure not an original one please if you can send me link off and World wide English official HTC manufacturing version and i would install it ASAP

Try this...
Start -> Settings -> System Tab -> Clock & Alarms
On Time tab, make sure your time AND time zone is set correctly
Start -> Settings -> System Tab -> Regional Settings
On Region tab, make sure your region is set correctly
Start -> Settings -> System Tab -> External GPS
On Program tab, make note of GPS Program Port
Download & Install VisualGPSce
http://www.visualgps.net/VisualGPSce/VisualGPSceInstall.CAB
Run Visual GPSce
Go to Connect -> Serial port
Set Port to that in "External GPS" setting above and Click OK
If the red dot in the bottom right flashes then your GPS is ok! You may just have to wait for a lock (look for QuickGPS too).

dor515 said:
NO its a custom something (I dont know) but for sure not an original one please if you can send me link off and World wide English official HTC manufacturing version and i would install it ASAP
Click to expand...
Click to collapse
Hi! Download from this link I found on XDA ARTEMIS Wiki
http://rapidshare.com/files/60087606/HTC_P3300_WWE_3.13.405.1_4.1.13.44_02.94.90_Ship_R.exe
PS: Link of the XDA ARTEMIS Wiki : http://wiki.xda-developers.com/index.php?pagename=HTC_Artemis
Tell us if it is working after this HTC WWE release.

Hey about the GPS solution its not working it says "could not initialize communication buffer size" than when i press OK another windows pops up and says "Unable to open port please close the application accessing thecommuinication port" and i press OK and nofting change can you help me with that .... thanking you in advance!!!

dor515 said:
Hey about the GPS solution its not working it says "could not initialize communication buffer size" than when i press OK another windows pops up and says "Unable to open port please close the application accessing thecommuinication port" and i press OK and nofting change can you help me with that .... thanking you in advance!!!
Click to expand...
Click to collapse
Did you reinstall the official ROM version?

Hey when I try to install the ROM WWE after I press the update button it sends me in a white screen and than he gives me ERROR 260 means cant connect with the device what should I do
p.s. by the way my operation system is Vista so just let you know if there is any kind off significance to the subject
Darren.

When I try to install it without memory card he gives me new error after 2 percent says ''INVALID MODEL ID" this utility can't be use on your PDA ... bla bla bla ... !!! you have any king of advice hint or any kind off something helpful

Try hard reset
First you can try to hard reset your device (pressing the 2 soft key and reset at the same time) You will get a message, press the green phone button. If this does not resolve your problem... you can read first post in the forum, to learn how to flash a new ROM. Does your gps ever worked ?

dor515 said:
When I try to install it without memory card he gives me new error after 2 percent says ''INVALID MODEL ID" this utility can't be use on your PDA ... bla bla bla ... !!! you have any king of advice hint or any kind off something helpful
Click to expand...
Click to collapse
Ok, the best thing to do is to CID unlock your device (I thaught you already done that)
Read this Thread carefully it will explain why!http://forum.xda-developers.com/showthread.php?t=308242
Then use only this to CID unlock your device : http://rapidshare.com/files/119852558/Artemis_USPL.rar.html
After that reinstall the original HTC WWE ROM.

Your problems are from flashing from vista, there are a lot of threads about this, but basically you have to piss about untill you have found out how to install a bunch of old xp drivers and then no more 260 errors. When you have done that you can tell us all here just how you did it and post the drivers again because they are getting harder and harder to find.

uniqueboy said:
Your problems are from flashing from vista, there are a lot of threads about this, but basically you have to piss about untill you have found out how to install a bunch of old xp drivers and then no more 260 errors. When you have done that you can tell us all here just how you did it and post the drivers again because they are getting harder and harder to find.
Click to expand...
Click to collapse
Uniqueboy you are too funny...but the easiest way is SDCARD flashing...have a look at XDA-Artemis-Wiki http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing

Imate ultimate 8150 WM6.1 official rom WWE

imate site make many step to take it !
now i uploaded to mediafire , anyone get 8150 and lockcode from the box can upgrade OS without register
http://www.mediafire.com/?zdxtwnzyv2g
hope some one find the way to upgrade imate os over NBF and SD card because when i put reset while hold a softkey it said SD and MMC mode ==> we have a chance to do it

sorry ! wrong file ! i fix it now pls wait 30m

http://www.mediafire.com/?wmtdzhzn20m

done....
ive already DL from imate which required registering...indeed it was a long process...this is what ive noticed with the new official rom:
1. a little faster than the wm6
2. they changed power settings, it now indicates how many percentage left..
3. imate also changed the mms manager...and it sucks! ive tested it and as per preference, the Arcsoft mms is much better than the new one in wm 6.1..(mms wm6- separates SMS from MMS, indicates how many percentage left in receiving/sending multimedia messages////mms wm6.1- integrates SMS and MMS in one profile, does not show percentage/progress as to receiving and/or sending MMS)
4. added Task Manager
5. SMS threading Enabled
so far, thats what ive noticed...
ADVICE: since this is not a clean rom, and thus all of what imate want to add is pre-installed, just manage your Windows/Starup folder and remove unnecessary start files that consume PPC memory..add your favorite tools such as QuickMenu(to make x, and ok botton as CLOSE/END/Terminate) and Advance Config Tools for improvement on POWER, PERFORMACE, AND STABILITY...

is this ROM support SDHC?

sorry,can't download

Imate.com web-site closed. Where are I can find ROM lock code?
I have not box with imei label and rom lock code.
How can update rom without this code?

RussianSpv said:
Imate.com web-site closed. Where are I can find ROM lock code?
I have not box with imei label and rom lock code.
How can update rom without this code?
Click to expand...
Click to collapse
I'm in the same condition... any ideas??

RussianSpv said:
Imate.com web-site closed. Where are I can find ROM lock code?
I have not box with imei label and rom lock code.
How can update rom without this code?
Click to expand...
Click to collapse
cocodesigns said:
I'm in the same condition... any ideas??
Click to expand...
Click to collapse
hello,
there is no way to perform any ROM up/ downgrade with your I-mate device if you don't hand the Rom lockcode
The only thing you can do to solve this issue is to look back for the pre-owner of the device, ask for box or quick user guiding book
Good luck!
Đôngni

Can anyone point me in the direction of a download of the official WM6 or WM61 ROM for the iMate Ultimate 8150? With iMate having gone bust and the site shutdown it's a little difficult to get it through normal means

i just downloaded ROM but can't upgrade my 8150 because it keeps "trying to connect to device"... I already set up sync to windows mobile device center on vista. How can I solve the problem? tks

my imate ultimate 8150 gest stuck on the blue i mate logo screen...n cant be detected by activesync in both CB and SS modes....neeed heeeeeeeelp...please its been over six months scince it broke down
PLEASE I NEED UR HELP UrGENT!!!

no link!!!

I can donate for wm6.1 rom for 8150.

The download link is broken. Can you put up another one please? I'm still on Windows Mobile 6.0...

cocodesigns said:
I'm in the same condition... any ideas??
Click to expand...
Click to collapse
on my Box l of imate Ultimate 8105 the default password was 1234 which works for both factory resetting & reinstalling too will it be helpful to any one anyway? just guessing even on mediafire the file is no longger existing:crying:

Please help!!!

HI,
guys i am new with my i-mate jasjam(herm 100).. and i had a problem with my sms service. i was not able to send sms with any sim card. so i installed some titanium edition wm 6.5 rom(previously i had wm5). and when i sync it with my pc i found that it was a trial version and it expired now giving me a white screen written
"this concludes the beta test of this software release. thank you very much for your time and effort in helping make this a great product for our costumers.
to obtain a newer release or further info, please revisit the web site that you used to obtain your current beta release."
now i am not able to access any thing on my i-mate. even active sync is not able to synchronize with the pc.
i only want install a good windows(rom) in it. so can any body help me with this problem of mines in easy way.like giving me a direct link to official rom and instructions to install it,,,
thanx a lot!!!

found the solution but still need help
i got the solution for expired version from another xda thread. hard reset did the job.
but i still need a official rom.wm 6 or latest.if dont than atleast please give me some link for wm5 official rom. i dont want to play with roms just give me a rom with which i can use my i-mate jasjam peacefully and also i can send sms to my friends... please help me thank you!!

AT&T
Here, Official wm6 AT&T
Here for Official HTC WM6 Rom all links

1 more question
THANX A LOT IRFAN. I GOT THE ROM EN IM DOWNLOADING IT NOW...
just tell me few things more, what is AT&T.
and what does radio ver means??

still having the same problem!!!
guys ive tried installing a new rom (i;e wm6)en it is working perfectly fine.
but my sms problem is still not solved. i can receive sms but cant send it.
any body knows what should i do????
plse help me!!!

umair muddassir said:
guys ive tried installing a new rom (i;e wm6)en it is working perfectly fine.
but my sms problem is still not solved. i can receive sms but cant send it.
any body knows what should i do????
plse help me!!!
Click to expand...
Click to collapse
Use this. It's a cab file so just install it, then run the program. Use your current network.
What happens sometimes is the proper settings are not set up, so you end up with your situation.

need that apllication for wm6
thanxxx for the rply,
i tried that software but it is not displayed any where, while installing it gave an caution that it was designed for previous windows.
so i got the name of it (i;e htc your application name). ill search for it on net for wm6.
please if get it from some where so do post the link. thanx a lot.

extra info
and just for more info i am using gsm prepay network, company name ufone!

waiting!!!!
comon guys waiting impatiently for ur replys....need help here!!!

try playing with the msg settings in schaps advanced config. check to see if the sms access number is correct.

xPreSiDenT said:
try playing with the msg settings in schaps advanced config. check to see if the sms access number is correct.
Click to expand...
Click to collapse
what is schaps advanced config???
en sms access number is correct ive seen it!!!