Related
Hey guys,
I was using Unsigned-Hard-SPL-Diamond-OliNex to flash b4 installing the new rom. it is showing 100% done and my phone reset, and all look fine...
however when entering bootloader screen it is showing me the version as 1.34.00 (sth like this), and check from the rom in the setting of the phone..it is still 1.34.xx (the original rom).
I was following the steps from some posts in the forums...but still the same..
Can anyone please help? sorry i am a newbie to pda phone...
Thanks again guys
can you follow the steps here exactly and let me know the result?
hard-spl upgrade guide
I have a similar problem. When i made HARD SPL everything is ok, but when i try to make a ROM update there is an error massage on the screen. I tried with 2 or 3 ROMs and always the same ****... I downloaded the official one and it's the same... I made printscreen here it is ---> http://img29.picoodle.com/img/img29/4/7/2/f_gggm_0346e0b.jpg any ideas ?
maybe you installed the rom using sspl and hard spl did not install when you tried to install it. Not sure if this is possible.
Let check the Hard-SPL installed:
press volume down and soft reset (small red button) together and keep until comes out the 3 colored band in the screen, read the Hard-SPL version, it must be 1.40.
Let us know, ciao.
that's the windows error message saying it needs to close.. what's the error message the RUU gives.. it should have a number, or description of what happened. sure your download is not simply corrupt?
Well I have downloaded it 3 times already and every time i tried to make ROM update after HARD SPL my device cannot make upgrade and this error massage is on the screen.. I made soft reset after HARD SPL and there was no 3, but 4 colors on my screen...I thought that I ****ed up the phone, but for my luck I'm not hehe. BUT The f***in version is the same:
ROM version: 1.34.831.1 WWE. ROM date: 05/25/08. Radio version: 0.93.25.NS16. Protocol Version: 52.24.25.08H.
Please help, I don't know WTF!?!? That version is just NO COMMENT!
Thanks...
yeah can you please state the exact error message that comes up?
also, can you confirm you have Hard-SPL on your device.. if so, which version? (signed or unsigned)
racerx_ said:
can you follow the steps here exactly and let me know the result?
hard-spl upgrade guide
Click to expand...
Click to collapse
Yea after i followed the steps it is working all fine for me. I think my original problem is the way to enter boot loader screen, but then during the flash of the signed rom (1.37.456.2) i found that the version for boot loader is SPL-1.40.OliNex .
Now all is working fine, thx guys!!!
1 more question, if i have the hard spl installed, flashed a new rom. What should i do if i wanna flash another rom? (let say, after RUU-1.37.456.2 i wanna flash 1.37.401.3). Should i sspl and hardspl and install the new rom? Or i just simply install the new rom without hardspl again?
Thanks again!!
no, hard-spl is 'permanent' on your device unless you manually revert to stock SPL or something..
just flash another ROM without flashing Hard-SPL again
racerx_ said:
can you follow the steps here exactly and let me know the result?
hard-spl upgrade guide
Click to expand...
Click to collapse
Could you please stop flashing your site all the way here? Here at XDA there is a lot of info how to flash your phone, it is not needed to flash your site all the time here. One time is enough.
i'm not 'flashing' my site.. if one time was enough he would have already gone through the guide. i didn't even MENTION the site, either, simply gave him a link to the guide. if you take time to read the thread you'll find that it actually helped him get hard-spl on his diamond which is why the site was created so we can minimize these kind of questions and threads in the forums.. if you spent more time actually helping people instead of writing ridiculous posts like this maybe we'd have a cleaner and more productive forum
Thankz guys thatz helpful
racerx_ said:
if you spent more time actually helping people instead of writing ridiculous posts like this maybe we'd have a cleaner and more productive forum
Click to expand...
Click to collapse
I'm sorry? Ridiculous posts?
I don't take you serious anymore. Saying that i am posting ridicolous posts while you are spamming all the way in here.
I just asked it friendly and now again, stop spamming your site. I find it in every support topic now a days and you are telling ME about a cleaner and more productive forum???
The info you have on your site is the same info as what can be found in here.
sumitescp said:
maybe you installed the rom using sspl
Click to expand...
Click to collapse
not possible, at all, and don't try either, you could screw the device up if you try to flash a ROM we signed.
Yzord said:
I'm sorry? Ridiculous posts?
I don't take you serious anymore. Saying that i am posting ridicolous posts while you are spamming all the way in here.
I just asked it friendly and now again, stop spamming your site. I find it in every support topic now a days and you are telling ME about a cleaner and more productive forum???
The info you have on your site is the same info as what can be found in here.
Click to expand...
Click to collapse
Is it me, or does his site look like a rip-off of mrvanx.org ?
Yzord said:
I'm sorry? Ridiculous posts?
I don't take you serious anymore. Saying that i am posting ridicolous posts while you are spamming all the way in here.
I just asked it friendly and now again, stop spamming your site. I find it in every support topic now a days and you are telling ME about a cleaner and more productive forum???
The info you have on your site is the same info as what can be found in here.
Click to expand...
Click to collapse
ya, ridiculous cause there is no step by step upgrade guide with pics in the forum, and yeah all the info was there, but obviously some ppl have trouble reading so i gave him the info he needed. You on the other hand have yet to say anything helpful in this thread. So stop being a troll and post something useful. this will definitely be the last reply i waste on you
Olipro said:
Is it me, or does his site look like a rip-off of mrvanx.org ?
Click to expand...
Click to collapse
i think it looks like the stock Joomla template that comes with a Joomla installation cause i couldn't find a cool enough template for this site Actually, i offered to help MrVanx add a trinity section to his site before i started my previous site, but no reply so i decided to help some non-hermes users.. this sure is a lot of drama for trying to help people with their noob questions
racerx_ said:
...I think it looks like the stock Joomla template that comes with a Joomla installation cause i couldn't find a cool enough template for this site Actually, i offered to help MrVanx add a trinity section to his site before i started my previous site, but no reply so i decided to help some non-hermes users.. this sure is a lot of drama for trying to help people with their noob questions
Click to expand...
Click to collapse
I like the site and the content. Update it always like MrVanx did before to his info site. There's no harm done here.
I'm wanting to get WM6.1 on my Orange (UK) SPV M3100, so i'm following the instructions at http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=17&Itemid=26
My question is:
There appears to be hundreds of roms to download.
Which one should I download?
Many thanks,
Ian.
Let the flaming begin
shanetheclassic said:
Let the flaming begin
Click to expand...
Click to collapse
NOT on topic or helpfull, better off NOT posting at all sir. We were all noobs once.
@djsky123, take some time to read through the threads in this forum and familiarise yourself with the ROMs currently alive....CRCs, PDAcorner and MRH seem to be the current ROMs in progress..
I think CRC's ROM is probably the best in existence...
I might have a little bit of bias though
Seriously though, have a read through what is included on the ROMs and see what fits your personal tastes...
Just make sure you flash your device with HardSPL first to prevent future tears...
CRCinAU said:
I think CRC's ROM is probably the best in existence...
I might have a little bit of bias though
Seriously though, have a read through what is included on the ROMs and see what fits your personal tastes...
Just make sure you flash your device with HardSPL first to prevent future tears...
Click to expand...
Click to collapse
Well, yeah... i took the plunge and did your 6.1 release 11.2 (hope you don't mind).
Seems good so far. - The wife's asking when my grandad died though.. took a bit of explaining why I had someone elses on my phone...
Thanks for welcoming me, and I'm sure i'll be on here over the coming months.
djsky123 said:
Well, yeah... i took the plunge and did your 6.1 release 11.2 (hope you don't mind).
Seems good so far. - The wife's asking when my grandad died though.. took a bit of explaining why I had someone elses on my phone...
Thanks for welcoming me, and I'm sure i'll be on here over the coming months.
Click to expand...
Click to collapse
On the first few pages of this whole list there is a kitchen to make your own splash screen, or even some have posted stock screens that some people pulled out, enjoy xda, it's the coolest place for your hermes.
zocster said:
....enjoy xda, it's the coolest place for your hermes.
Click to expand...
Click to collapse
it really is. but a warning to you, READ AS MUCH AS YOU CAN!!!! knowledge is power in this forum (it works as currency too)
Can I Just ask, now that i've flashed my hermes with a new rom, is it now un-locked so that I can insert sim cards from other networks in it? I was on orange UK but want to use an O2 sim in there at some point.
Cheers.
djsky123 said:
Can I Just ask, now that i've flashed my hermes with a new rom, is it now un-locked so that I can insert sim cards from other networks in it? I was on orange UK but want to use an O2 sim in there at some point.
Cheers.
Click to expand...
Click to collapse
See here:
http://forum.xda-developers.com/showthread.php?t=293665
So the answer is no, and I need to also flash something called a "Radio Rom" ?
djsky123 said:
So the answer is no, and I need to also flash something called a "Radio Rom" ?
Click to expand...
Click to collapse
The answer is "no but its easy to, by reading that topic and using that tool"
djsky123 said:
I'm wanting to get WM6.1 on my Orange (UK) SPV M3100, so i'm following the instructions at http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=17&Itemid=26
My question is:
There appears to be hundreds of roms to download.
Which one should I download?
Many thanks,
Ian.
Click to expand...
Click to collapse
Dear Ian,
I cannot tell which ROM to flash because it depends on MANY things... Nevertheless i can tell you a few things thay will help you...
1. Read the Flashers BIBLE i.e. the WIKI.
2. Never, but NEVER mess or tamper with our PDA unless you are sure of what you'r doing BEFORE you do it. If your are not sure ask before.
3. Never pay attention to flames or stupid answers. You will get quite a few over here...
4. I was oncve a noob and i know how it feels to e stepingon muddy watters.
5. If you feel you get no positive answer to your questions, PM me at will and i will try to help.
Cheers, welcoe and good luck
no you need to run an unlocker not flash the radio you can get the unlocker for the hermes from here if its a g3 http://forum.xda-developers.com/showthread.php?t=293665
first of all do Hardspl, this will unlock your device too.
remember - when you flash any official rom you automaticaly erase hardspl. suggest you to try some pdaviet roms, for noob they are very nice. but if you need stability - try pda corner e.t.c. by the way - Im using spv too
obaz said:
first of all do Hardspl, this will unlock your device too.
QUOTE]
I did HardSPL, so it should be unlocked I guess.
One issue i've got with CRC's 6.1 rom is that when I get an answerphone message, it only comes through as a text message showing random characters. Can this be fixed somehow?
Click to expand...
Click to collapse
djsky123 said:
obaz said:
first of all do Hardspl, this will unlock your device too.
QUOTE]
I did HardSPL, so it should be unlocked I guess.
One issue i've got with CRC's 6.1 rom is that when I get an answerphone message, it only comes through as a text message showing random characters. Can this be fixed somehow?
Click to expand...
Click to collapse
When you get to a ROM-specific issue, it is best to post in the specific thread for that ROM (helps keep the forums organized and helps you get an answer more quickly)
Welcome and best of luck!
Click to expand...
Click to collapse
djsky123 said:
obaz said:
first of all do Hardspl, this will unlock your device too.
QUOTE]
I did HardSPL, so it should be unlocked I guess.
One issue i've got with CRC's 6.1 rom is that when I get an answerphone message, it only comes through as a text message showing random characters. Can this be fixed somehow?
Click to expand...
Click to collapse
6.2 is oldd.. the newest version is 11.2, maybe you should try flashing that and seeing if it is fixed.
If it keeps on, try asking in the 11.2 thread.
Click to expand...
Click to collapse
helo guys i never instaled a different rom on my htc diamond (xda diamond) and i would like to see this first how it can be done i also have a question i have the htc diamond but its from the carier O2 germany its called xda diamond but its the same phone could you tell me if i can install the rom updates thanks alot
could someone please answer
If you would have read the full forum you would have cum across this site www.modmydiamond.info this site gives pictorial view on how to upgrade your ROM it is the best so far which I have also followed it...
Hope it helps.... Take care cheers....
stenk said:
helo guys i never instaled a different rom on my htc diamond (xda diamond) and i would like to see this first how it can be done i also have a question i have the htc diamond but its from the carier O2 germany its called xda diamond but its the same phone could you tell me if i can install the rom updates thanks alot
Click to expand...
Click to collapse
may helps:
http://www.youtube.com/watch?v=i0w87ZzcTfs
NetDevil2 said:
may helps:
http://www.youtube.com/watch?v=i0w87ZzcTfs
Click to expand...
Click to collapse
yep, that is pretty much it. the progress bar is sped up tho, it takes up to 10 minutes. its really easy!
Also you might want to look at this thread http://forum.xda-developers.com/showthread.php?t=416211. Between that thread and www.modmydiamond.info you should be just fine.
I think that If you look in the forum you will find lots of information, anyway as posted it's quite straightforward.
sirx said:
I think that If you look in the forum you will find lots of information, anyway as posted it's quite straightforward.
Click to expand...
Click to collapse
Yeah, there's nothing much to it really, just follow the instructions in the update utility.
Dear All,
i'm so sad to announce that my GENE100 is now at the repaire shop for fixing the problen that has been caused after following the post of "orefkov" in this thread
http://forum.xda-developers.com/show...=360357&page=4
i don't know what to say to him regarding the very bad program that he mentioned there.
after i copied his program to my GENE's momory and run it, i got to the tri-color screen and no updates can be done for three days.
i searched many threads regarding this problem and i found this:
http://forum.xda-developers.com/show...=360357&page=9
robekia1 said:
Dear All,
i'm so sad to announce that my GENE100 is now at the repaire shop for fixing the problen that has been caused after following the post of "orefkov" in this thread
http://forum.xda-developers.com/show...=360357&page=4
i don't know what to say to him regarding the very bad program that he mentioned there.
after i copied his program to my GENE's momory and run it, i got to the tri-color screen and no updates can be done for three days.
i searched many threads regarding this problem and i found this:
http://forum.xda-developers.com/show...=360357&page=9
Click to expand...
Click to collapse
I am sorry to hear your bad experinece, but I have to say that all of us using tools that were not specifically designed for our devices and found on this fantastic forum are AT OUR OWN RISK.
Personally I have more than a year using several OS, soft, etc and never crashed my device.
I enocurage you to not blame a bad programmer never.
It was never intended to harm anyones devices, but there is always a risk that we agree to have when we install something "extra"
Good luck mate
Hi orb3000,
I agree with you 100% and i wish that my GENE will come alive again.
the problen now, i don't know what they'r gonna do with my GENE and even it'll be upgradable after thier fix or i have to use it as it is?
robekia1 said:
Hi orb3000,
I agree with you 100% and i wish that my GENE will come alive again.
the problen now, i don't know what they'r gonna do with my GENE and even it'll be upgradable after thier fix or i have to use it as it is?
Click to expand...
Click to collapse
I´m sure after your repair your device still be upgradeable!!
Cheers
Thanks for you reply.
Any how, i'll keep trying and trying to upgrade my GENE with the latest versions but my question to you is:
Do you (have/know) a good/tested tools to be used? because i downloaded many many tools/.nbh and it cause headack to me.
which one trusted and tested and working fine and which WM versions stable?
please
orb3000 said:
I´m sure after your repair your device still be upgradeable!!
Cheers
Click to expand...
Click to collapse
Dear,
i got my GENE back and it is working fine (they charge me 100$).
can you help me please to upgrade it with the correct procedure and tools to do that?
i'm confused by all the tread descriping the procedure and tools.
robekia1 said:
Dear,
i got my GENE back and it is working fine (they charge me 100$).
can you help me please to upgrade it with the correct procedure and tools to do that?
i'm confused by all the tread descriping the procedure and tools.
Click to expand...
Click to collapse
I recommend you to READ the Wiki, and to ask to the most experienced members that have a device like you
Good luck!
Can anyone tell me which HardSPL (+ version) I should be using on my XDA Ignito please? I'd like to use the Dutty ROM.
And yes, I've searched, but I couldn't find any posts that answered this exact question.
Reado said:
Can anyone tell me which HardSPL (+ version) I should be using on my XDA Ignito please? I'd like to use the Dutty ROM.
And yes, I've searched, but I couldn't find any posts that answered this exact question.
Click to expand...
Click to collapse
have you even read the 1st post in duttys thread????
it is stated what to use if you look
look i could see it
""" Before Flashing Please ensure You have UN_Signed HARDSPL install on device this will ensure your device wont get bricked.
Thanks To Jocky2001 For HardSPL
http://forum.xda-developers.com/showthread.php?t=408621 """
why couldn't you??????????
Because in the same thread I saw people complaining about errors on their Ignito - Someone posted a question relating to an error on their Ignito and is still waiting for a response - I don't really want that to happen to me, which is why I thought I'd ask...
Reado said:
Because in the same thread I saw people complaining about errors on their Ignito - Someone posted a question relating to an error on their Ignito and is still waiting for a response - I don't really want that to happen to me, which is why I thought I'd ask...
Click to expand...
Click to collapse
If you don't want the possibility of errors, then don't mess around flashing your device, leave it as it is. Read the stickies - there is plenty of information to enable you to make a decision
Thanks for no help. Much appreciated.
At the risk of being told off for encouraging you
A search "Ignito hardspl" of the Diamond root forum produced some good threads of which
My mini TUT is one.
Admittedly not a full ROM flash but the principle and Hard-SPL are the same
HTH
Kim
Because my Ignito already had an spl 1.93. I used
RUU_Signed_1_93OliNex_HSPL_UnsignedEdition. from the link in Cozzy's reply
I have flashed several times now with different roms succesfully.
Hope this helps.