A couple of Questions after WM6 Upgrade - 8525, TyTN, MDA Vario II, JasJam ROM Development

first of all I'm in Australia and conected to the 3 network, I've upgraded to the Black 2.0 rom and Radio 1.38.00.10 all is working well.
I have a Dopod 838 Pro
Question 1. instead of the U when I'm connected to 3 I'm getting a H is this normal, I get the normal 3g when not recieving Data.
Question 2. When I use to get an Text or Email I would get a Voice promt,
You have Mail or You have Message, I can no longer find them in the notification settings.
and before anyone says anything I Searched and Searched.

There are better people than me to answer question 1, but question 2 - the sounds would have been part of your original ROM, and aren't included in the one you have now. The files you're missing are just sound files that would be in the windows directory, so if you can find the files, just copy them there and they'll appear in the notification options dialog box.
If you post you ROM here, someone with that ROM may come along and help you out, otherwise you could try googling for something similar, or you could even record your own with your device!

Question1: Basically H is short for HSDPA which is 3.5g network. Much faster and better. When not connected to the web, it would just chew up battery (I'm guessing) so well done your phone is now compatiable with the faster network.
Question2: As Paurockliffe said. Those were sounds files part of the old rom. I just upgraded as well, and the misses loved those sound files. I wish I could get my hands back on them for her, but i'm not in the mood to flash again and strip the sounds... Maybe might give aussie3g.com a whirl.. someone on their forums is bound not to have upgraded the dopod yet...

DVSO2 said:
first of all I'm in Australia and conected to the 3 network, I've upgraded to the Black 2.0 rom and Radio 1.38.00.10 all is working well.
I have a Dopod 838 Pro
Question 1. instead of the U when I'm connected to 3 I'm getting a H is this normal, I get the normal 3g when not recieving Data.
Question 2. When I use to get an Text or Email I would get a Voice promt,
You have Mail or You have Message, I can no longer find them in the notification settings.
and before anyone says anything I Searched and Searched.
Click to expand...
Click to collapse
1) Your problem seems to be just wrong icons - this has been reported heavily for WM6 ROMs, there might be some fixes around.
2) As said above these sounds were part of your original ROM. Sounds are stored in Windows folder by default so you are free to dowload/use whatever sounds you like. You can assign sounds and notifications for many actions using Settings >> Sounds and notifications option. You can even record and use your own notifications.

Thanks for the quick replies, now just to find some witty alert sounds.

got mail n youve a message attached.. hopefully...

Your icons are fine! As previously said, when your device sends and receives packets of data on a 3g cell that is upgraded with HSDPA, your icon changes to an H to show you are getting the faster data service.

simon_darley thanks for the files, and Unwired thanks for the advice.

Related

Use telephone and data connection at the same time?

Back when I had the base Cingular WM5 rom on my phone I was able to talk on the phone and have my data connection going at the same time. Since upgrading to WM6, XDA Live .20 and Black 2.0 I have not been able to get that feature back. To make a call it has to disconnect me. Then once I get off the phone call the data connection connects again. I tried the Allways On option in HTweakC that came with the WM6 releases but that doesn't appear to be what I am looking for. Does anyone else notice this or have a fix?
My device maintains a data connection whilst I am on voice calls. I receive emails fine whilst talking. Its on Black 2.0
KanosWRX said:
Does anyone else notice this or have a fix?
Click to expand...
Click to collapse
yes.. try your phone and data in a 3G area... voice and data only works in 3G not edge......
I have tried it in a 3G area, right by my work I have 4 bars of 3G. But everytime I try to call or get a call it always closes the data connection.
try using bandswitch and manually fixing the phone to 3G only.. just to make sure its really on 3G and not secretly on Edge..
When I select the WCDMA Network I get the 3G Icon, when I select the GSM Network I get the E Icon. So I think it knows the difference between 3G and E just fine. I leave the "band" setting set to Auto.
BTW I am using radio rom 1.38.00.10 now, but even when I had the factory 1.16.00.00 I still had this problem with WM6. It only seemed to work with WM5. Another strange thing, in the phone app it says UMTS Cingular, just another sign it is actually using UMTS (3G).
Its just so annoying if I am online doing anything, slingbox, browsing the web, then when I want to make a call, it usually fails the first time while it disconnects then it goes through
Another odd thing probably just part of the new radio rom, when online and it starts to load data it switches to an H icon, I guess for HPDSA or whatever that abbreviation is.
Are you sure its really closing the data connection? Ignore the icons. Send yourself some emails and see if they arrive whilst on voicecall.
KanosWRX said:
When I select the WCDMA Network I get the 3G Icon, when I select the GSM Network I get the E Icon. So I think it knows the difference between 3G and E just fine. I leave the "band" setting set to Auto.
BTW I am using radio rom 1.38.00.10 now, but even when I had the factory 1.16.00.00 I still had this problem with WM6. It only seemed to work with WM5. Another strange thing, in the phone app it says UMTS Cingular, just another sign it is actually using UMTS (3G).
Click to expand...
Click to collapse
i was saying to do this as a test, just to make sure the phone wasnt doing something funny... just some basic troubleshooting to help find the problem...
kinda like if your car wont start.. there are different problems that could cause it, maybe its out of gas, maybe the fuel filter is clogged, maybe the battery is dead.. different things can cause similiar problems, its better to eliminate all possibilities
I tested it this morning, data and voice works fine at the same time. Called voicemail and then opened up IE and was able to load several pages while on the call.
Edit, where are you located? Is it possible there is a problem with the network there? Try downgrading back to the Cingular software and see if that works.
Shogunmark, I figured thats what you were getting at, and I tried all the options I could that would give me a connection to the network, but I still couldn't do data and telephone at the same time. Everytime I was connected online then went to place a data call it would have to disconnect me first. I tried doing a phone call then connecting online, but nothing would load.
I guess I could try going back to WM5, but I have hard spl 1.4 on so I gotta do a little rom editing of the cingular rom to get WM5 back I guess. didn't realize it was that complicated to go back to factory after installing hard spl.
Im surprised no one else has this issue. Its been like this for me pretty much as long as I have had WM6, so I doubt its the cingular network.
KanosWRX said:
Shogunmark, I figured thats what you were getting at, and I tried all the options I could that would give me a connection to the network, but I still couldn't do data and telephone at the same time. Everytime I was connected online then went to place a data call it would have to disconnect me first. I tried doing a phone call then connecting online, but nothing would load.
I guess I could try going back to WM5, but I have hard spl 1.4 on so I gotta do a little rom editing of the cingular rom to get WM5 back I guess. didn't realize it was that complicated to go back to factory after installing hard spl.
Im surprised no one else has this issue. Its been like this for me pretty much as long as I have had WM6, so I doubt its the cingular network.
Click to expand...
Click to collapse
not at all, just drop a WM5 NBH into a folder with CustomRUU and use autodetect. it'll flash quite happily
How would I take the HTC Cingular rom (found here, http://www.america.htc.com/support/8525/software-downloads.html) and get the WM5 NBH? Or will I have to use another WM5 version?
Just chiming in to say I don't have this problem and I've used both those roms and still using WMXL 0.20 now and use data and calling all the time. I am using the same radio ROM as you now too and it still works ok.
What apps do you have installed? anything that would end the data connection for some reason? Maybe put a list of apps and customisations you've made since installing the WM6 rom you have?
You could also try it with a blank WM6 rom, manually add the data connection settings and try and see if that works? Just to eliminate 3rd party apps and thing's you've changed.
The only other similar thing i can think of is I do remember there was an issue where data would disconnect when changing between 3G and EDGE. I don't remember who had this problem or why but it could be related.
Let us know how it goes?
Maz
--------------
This would be great to add to the bug tracker website when I finish it.
http://maz.net.au/
KanosWRX said:
How would I take the HTC Cingular rom (found here, http://www.america.htc.com/support/8525/software-downloads.html) and get the WM5 NBH? Or will I have to use another WM5 version?
Click to expand...
Click to collapse
Use this guide to go back to the Cingular ROM.
http://www.mrvanx.myzen.co.uk/hermes_guide/Downgrade/index.html
Here are the apps I have
Resco File Explorer
Core Media Player
Slingbox
Don't run to many apps on my ppc as you can see. I mainly just use it to stream media from home (orb, slingbox), and internet connection sharing. I'll probably find some time tonight to revert back to WM5 and let you know what I find.
Well I just flashed back to the cingular rom, and guess what it's working again, can talk on the phone and be on the internet at the same time. So weird. well I guess I will try going back to Black 2.0 and see what happens.
Kanos,
Your problem is definitely not WM6. As in WM5, I can concurrently browse the internet during a voice call. As Mark said, there may be other issues specific to your case -- you'll have to methodically eliminate one-by-one... you'll have to decide if the process is really worth the time yourself.
FWIW:
Radio 1.34
HERMES 200 HT625 (in use since 7/4/2006)
Network: Manual (Taiwan UMTS)
Band: Auto/GSM(900+1800)+UMTS(2100)
Cheers
I believe it's not truly a problem with WM6, as people obviously have gotten it to work. I will definitely look into it more and keep you all updated on what I find. Right now I am still on WM5 but I will flash back to WM6, no apps installed, right after a fresh hard reset and see if it works or not for me.
I decided to try LVSW this time. Guess what it worked, I was able to both data and phone at the same time. Next test will be to install Black 2.0 again and see what happens.
My theory is this, I had XDALive .10 and maybe that version had this issue, then when I upgraded to .20 it carried over somehow and then carried over to black 2.0. Then once I went back to WM5 it reset everything. Don't ask me how, but obviously I have a lot more flashing to do to test this theory.
the imate site on wm5 proclaim this as a problem. when u r receiving data at a specific point in time u cannot receive a call.
the aust. telstra latest release says the upgrade fixes this.
to bypass going back to wm5 i just used the xda radio only upgrade to try and bypass. this was i believe only when receiving data and a call inwards simultaneously.
otherwise i have never had ur problem n likely a flash issue.
there is another i have noticed in recent releases is activesync now asks to allow data to be received when activesync this is a 4.5 change so perhaps looking for this setting may also help ur simultaneous data issue. just a guess but it might have been easy to not allow this when u upgraded to wmg which rwquired 4.5 to do this.
anyway goodluck with it.

24 hour clock and uk style date and splash screen

Hi, i have just upgraded to Windows Mobile 6 the black 2.5 edition.
Whilst I was doing it i had my memory card left out which had applications on it, now when I put it back, the applications are not there..? I copied all data from active sync > explore (except my windows mobile device) and then I copied it back after upgrade. I am not fussed that the programs are gone, it would be good to get them back though, and since the card was not inserted during the upgrade, the application files must still be on the card somewhere taking up space...?
Anyways, I can't seem to get the 24 hour clock on it and also can't change the date to the UK style e.g. 24/04/2007, it is stuck in american style e.g. 04/24/2007. Any answers...?
Is Windows Mobile 5 applications supported by Windows Mobile 6? Can I have links to Windows Mobile 6 downloads please
Also , I do not like the boot screen, I want to put a picture of my wife and son, how do I do that? Sorry I am an intermediate user.
Please read the wiki http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
before you get abused.....
Couple of pointers though, you might want to check your country is actually set to UK, rather than the default US.
When you install Black you wipe out the entire OS, the application files will be on the card, but the shortcuts in the OS that you find in the menu's and the programs directory will not. Search the card to see if there is actually anything on it at all.
You cant actually copy installed Apps with ActiveSync, it doesnt work that way, you can use it to re-install apps.
Most WM5 apps will work with WM6, but some will not and some will have odd behaviour because the programming interface isdiffeent to WM5.
But please, read the Wiki
Sorry, unable to help with the card issue.
But, the 24 hr clock & date is in settings, regional settings & set to english (uk).
The splash screen is explained in Mr Vanx upgrade guide, where it is explained re first & second screens.
Hope this helps & sorry if you have already completed or read the guides
Or, leave settings on US and choose (in Settings, System, Regional Settings):
Time: HH:mm:ss and you're on 24hr clock,
Date: dd-MMM-yy and you're on European date.
And if someone flames you for asking, screw that
Thanks very much. The ony things I need to do now is fix the wifi, it doesn't turn on..?
Also, the start bar sometimes hides....
and about the applications on the card. they are still there under "program files" and can be opened but some of them - registration fails. The shortcuts are not in the menu though...
Also how can I add a running programs shortcut on the bottom like I had on WM5..I can't seem to do it....
Sorry for sounding so dumb...
monz87 said:
Thanks very much. The ony things I need to do now is fix the wifi, it doesn't turn on..?
Also, the start bar sometimes hides....
and about the applications on the card. they are still there under "program files" and can be opened but some of them - registration fails. The shortcuts are not in the menu though...
Also how can I add a running programs shortcut on the bottom like I had on WM5..I can't seem to do it....
Sorry for sounding so dumb...
Click to expand...
Click to collapse
Hmmm, there is a known issue with wifi settings getting wiped out, there are a couple of threads about it in Hermes upgrading, Olipro and pof are working on a fix that they say should be out in a few days.
Dont know about the start bar hiding, havent seen that myself, as for the apps, I would say maybe install them again to the same location to put all your shortcuts back, technically you will just be putting the same files on the storage card and any settings that went on the card should still be there.
I cant find a way to add running programs either, go into settings/memory/running programs or use the taskman program. If anyone else has seen a way to add running programs to the softkey setup I would be quite grateful too.
Its not about sounding dumb, you dont - you're just lacking the necessary info, its just if you ask questions that have been answered elsewhere people figure you are just being lazy or ignorant especially if they are the same kinds of questions that people keep on asking that can be answered by doing an advanced search and selecting show posts instead of show threads.
Just keep at it, you will get there in the end.
chrisjasper said:
Hmmm, there is a known issue with wifi settings getting wiped out, there are a couple of threads about it in Hermes upgrading, Olipro and pof are working on a fix that they say should be out in a few days.
Dont know about the start bar hiding, havent seen that myself, as for the apps, I would say maybe install them again to the same location to put all your shortcuts back, technically you will just be putting the same files on the storage card and any settings that went on the card should still be there.
I cant find a way to add running programs either, go into settings/memory/running programs or use the taskman program. If anyone else has seen a way to add running programs to the softkey setup I would be quite grateful too.
Its not about sounding dumb, you dont - you're just lacking the necessary info, its just if you ask questions that have been answered elsewhere people figure you are just being lazy or ignorant especially if they are the same kinds of questions that people keep on asking that can be answered by doing an advanced search and selecting show posts instead of show threads.
Just keep at it, you will get there in the end.
Click to expand...
Click to collapse
Thanks. I upgraded my radio rom to 1.41 and my network mucked up...I couldnt even get a signal. Then I went to 1.40 and now my wifi is working and and i get a network. not sure if its as clear as before though...
monz87 said:
Thanks. I upgraded my radio rom to 1.41 and my network mucked up...I couldnt even get a signal. Then I went to 1.40 and now my wifi is working and and i get a network. not sure if its as clear as before though...
Click to expand...
Click to collapse
Thats odd because the wifi and radio dont actually have anything to do with each other, radio rom controls GPRS/3G stuff. Oh well, go with it.....
chrisjasper said:
Thats odd because the wifi and radio dont actually have anything to do with each other, radio rom controls GPRS/3G stuff. Oh well, go with it.....
Click to expand...
Click to collapse
Really..? That could be why my web pages weren't opening. I've just been on the phone to T-Mobile as it goes and they say that their 3G is down. I'm able to connect to GPRS but loading the web pages it just says opening and nothing opens. They said it should be OK in a few hours...oh well.
monz87 said:
Really..? That could be why my web pages weren't opening. I've just been on the phone to T-Mobile as it goes and they say that their 3G is down. I'm able to connect to GPRS but loading the web pages it just says opening and nothing opens. They said it should be OK in a few hours...oh well.
Click to expand...
Click to collapse
You got through to a human at T-Mob before the problem was fixed......?
Now that is unusual.
chrisjasper said:
You got through to a human at T-Mob before the problem was fixed......?
Now that is unusual.
Click to expand...
Click to collapse
LOL no that time my network problem was fixed because i had went to Radio 1.40 just web pages werent working. Then they called me back on my work phone to help me solve it anyways...

Is it network, WM6, or the unit problem?

The problem is one of the most annoying ones you can have: it appears only from time to time and you don't know when and even when it does you don't notice.
Simply my phone is not accessible for others even it shows full range and so on. The message "...the phone is switched off...". This problem occurs in as far as I remember 3 releases of ROMS (full, vanillas, etc). The radio ROM was also changed. I don't remember having such issue in early WM6 or in original 2005.
Since it's not related directly to any of the releases I post it as a new thread.
Now I have 3 options:
1. Downgrade to 2005
2. Throw the unit through the window, wait until end of contract and buy an iPhone
3. Try to fight with T-Mobile UK - which is not really an option since I just recovered from fighting with Orange for over a month
Does any of you experienced such problem?
Any known issues with downgrading to 2005 like ISPL required before flashing original ROM?
Any suggestions?
Adigital said:
...
Any known issues with downgrading to 2005 like ISPL required before flashing original ROM?
..
Click to expand...
Click to collapse
Well, I got the answer - couldn't wait and did the downgrade using original ROM. If anyone interested it went without problems. No ISPL needed. Connected, fired-up the exe file and worked OK.
I'll see how about the availability problem.
Ok, seems that it's only me having the conversation ;o)
I apologize for the thread location - it doesn't seem to be related strictly to WM6 anymore as I...
...installed WM5 and did some tests:
(I have voice mail switched off)
- Call waiting enabled = no calls allowed when GPRS active
- Call waiting disabled = no calls when transferring data (large file) but received when no transfer
- Used W660i SonyEricsson handset - could receive calls regardless of GPRS activity
Rang T-Mobile tech support where they told me that this is network feature that when internet connection is active no calls are allowed and since my voicemail is turned off all callers get message that my phone is switched off. In the light of GPRS specification and my tests this is a bull****.
Now I'm asking anyone on UK T-Mobile Web'n'Walk and who wants to help - please do such test. Just try to call your number from different phone when opening a web-page.
This is pretty important to me - I need internet on the move and don't want to get rid of my MDA.
Thanks in advance!
Hi there,
I'm on T-Mobile UK too and I ran some tests myself and found that you are absolutely correct. When you transfer data you cannot receive phone calls.
I've got an O2 device with me I can do some more tests on and I'll also try and borrow my Wife's Samsung and test that too. I'll post my findings here.
Cheers
Alex
ok, i've just tested this on an O2 3G device and there was no problem, next to try a none windows mobile t-mobile phone.
seems this problem has been around for while and on other networks.
http://www.freenfo.net/mobile/archive/index-t-64022.html
ok, final test and conclusion.
I tested the same o2 phone as above but in a NON 3g area (i.e. gprs only) and found the exact same issue.
conclusion: this seems to affect all types of phone and multiple networks but only when using gprs NOT 3g.
I'm suprised we havent heard more about this problem.
cheers
Alex
Thank you Alex very much for your help.
I did some research on the topic last night and found the same info as guys in the thread your linked. It must be that T-Mobile UK operates in NOM-2, which allows to suspend GPRS session only when no data is transferred. When packets are transmitted the device doesn't 'see' incoming calls as it's 'busy' with dealing with the packets. NOM-1 is 'able' to encapsulate information about incoming call into one of the packets and the device is notified about - so it can react, suspend the transmission and pick up the call.
The fact is that our MDA/Artemis uses Class B of GPRS which doesn't allow simultaneous CDA/GPRS at the same time. Even if it can suspend active data transfer it is the network that has to support that feature.
What I must notice is that I had lot more problems wiht this when I was using WM6. It seems that there were some packets transmitted by the system or something. I had my mail set to check servers every 15 mins at the beginning but lately ony once an hour or two. Other soft that could transmit anything was Weather module from SPB or Touch. Now when I'm on WM5 and was checking the issue during loading a page I was unavailable but as soon as a page was completely loaded my phone was accessible back.
My surprise is that if the 'issue' seems to be quite normal and there is nothing to do about it why I couldn't find any info about it here. Doesn't it affect anyone of our community?
I may be wrong with the WM6 expirience but still. If WM6 works fine in that respect it must have happened that someone missed a call when browsing the net.
i hadnt noticed to be honest
mugglesquop said:
i hadnt noticed to be honest
Click to expand...
Click to collapse
Did you try ringing your phone when it was loading a long page or downloading a file?
TBH I think I've noticed it just as much on WM6 as I did (or didn't) on WM5, I think I put these odd voice mails turning up down to weird WM issues! Now I know the truth though.
Obv. there isn't a lot we can do about this and I'm not prepared to turn off my Windows Live Mail or my direct push. I think we just have to wait until our contracts are up for renewal and get over to a 3G device - I'm liking the look of the Touch Cruise myself, or the Touch Dual if I want that keyboard back and by the time my contract is up I think they should be on T-Mob UK.
does the same thing happen in Edge areas or as that rolls out will the problem disappear?
I'm not sure about how EDGE works but the problem affects GPRS rather than 3G due to the fact that GPRS and the incoming call are submitted alongside each other and 3G is seperate. I don't think t-mob uk have edge running yet so I can't test, perhpas some else can test for us.
Bro.. My first 3rd party ROM is the Touch 3.0.. and yes.. my connnection did go off once a while (no bars as well).. that was kinda irritating. I have to go to connection manager and toggle my data connection or something like that, before my phone will get the GSM signal.
And yea.. the original WM5 and WM6 have no such issues.. I wonder if this is because of the new radio version..

Call answer delay?

I'm working with a Tilt2 running the stock euro HTC 6.5 rom
and I have an odd delay. once a call comes in and I either use
the "slide to answer" feature or if i just press the call answer button
there is a long...sometimes 10 second delay between my action and
the call actually connecting.
During this time i often miss calls and ive asked those who are calling me
what they hear and they say my phone goes silent for 10 seconds before i
answer. any ideas?
Someone else found this link, not me -- and I haven't tried it, but I have experienced similar (3 secs though and not often).
http://forum.ppcgeeks.com/showpost.php?p=458469&postcount=1
After doing this it does seem to pick up the calls a lot faster but now I'm getting a slew of various data connection errors. SOTI wont connect, my weather tab will not connect.
Thanks for the assist I'm going to try and find a happy balance between the two reg settings
Update: I was wrong initially about the reg edit fixing things. I had my wife call immediately after the edit and it seemed to fix it when I noticed the connection issues through various programs.
Well during work today I answered about 7 calls. The delay affected all of the and on all but 1 the call actually disconnected before it allowed me to speak. so i will be reversing the red edit to combat the connection issues.
So clarify a few questions I Got regarding this:
When the phone rings and I press the answer button or "slide to answer" the ringing does stop and the icon in the task bar shows a call connected. but for me and my caller we hear dead silence for 10 seconds until they either hang up or the call connections. Any ideas friends?
I'm having the same issue on my US AT&T Tilt 2. It is driving me crazy, the regedit did not fix anything for me either. Did you figure you this out at all?
Are you guys running stock or a custom ROM? I have had this issue in seven ROMS. In my case, it seems that my phone has to have the ATT Dialer to avoid this. Tried Energy Photon and Leo,Josh Koss, TPS, and Shadowline. All had this problem. I'm now on Fusion 6.0 with the ATT Dialer. Not one issue. Day before I flashed this one, I missed 19 calls at work because I couldn't get the slider to register. Tried TPC's latest last night(he uses the HTC Dialer), missed calls. Flashed ATT Stock no problem. Fusion is the only other ROM I found with an ATT Dialer.
It seems there is a conflict in the device when connecting.
Some things to try:
- remove the custom dialer (just use the WM6 dialer, but this will loose video calls)
- check if there is some call-recording software that kicks in
- does this happen when the device is off or also when it was already on?
I'm Using HTC's stock rom instead of the ATT rom. since I'm America I really would not be apposed to loosing video call from the dialer since Its not supported on my network but I'm really not sure how to change the dialer back to AT&Ts ...is this something that would have to be cooked into the rom because I cant stand AT&T's rom.
Flash a ROM that uses the AT&T dialer: problem solved.
Your options are: Stock AT&T, At0mAng, Arrupenthal, Twopumpchump roms.
So how do we go about getting a cab file of the AT&T dialer, video share and PTT packages that each individual user can apply as needed? Is this even possible and would it require uninstalling whatever dialer the chefs cooked in? I think it would be impractical to ask the chefs to make two versions of their ROMs (one for at&t tilt2 users and one for everyone else) as I have attempted to cook my own ROM and know how difficult it can be.
Thanks,
Stephen
hi
sorry. bad post

Remove notification when having no radio coverage

Hi there,
is there any possibility to remove this notofication when having no radio coverage (as in my underground garage)...
I'm a bit fed up with it, always switching it away...
thx and br
is there no solution?
*push*
is there nobody who has an idea how to disable the "no connection possible" notification?
Sperti said:
*push*
is there nobody who has an idea how to disable the "no connection possible" notification?
Click to expand...
Click to collapse
You will need to supply information as to which ROM you are using.
On my stock Tmobile US ROM, I don't get this notification.
I use the latest HTC ROM (6.5) with Sense 2.5 but I had this notification on every ROM I had installed (6.1 and the 6.5 from November)
to explain it once more. when I go in my underground garage (where I have no radio coverage) and I stay there for 2 minutes, then the notification comes which says: "no connection possible".
I would like to disable this, but in Software there is no possibility.
Sperti said:
I use the latest HTC ROM (6.5) with Sense 2.5 but I had this notification on every ROM I had installed (6.1 and the 6.5 from November)
to explain it once more. when I go in my underground garage (where I have no radio coverage) and I stay there for 2 minutes, then the notification comes which says: "no connection possible".
I would like to disable this, but in Software there is no possibility.
Click to expand...
Click to collapse
This sounds more like you phone is trying to make a data connection, rather than a phone connection. I do get this alert when there is no phone service available - but only if I try and go online for some reason. Are you using some applications that automatically connect to the Internet?
yes, the weatherapplication, active sync, etc.
and I think you are right, regarding the data connection. is there any possibility to switch off this data connection notification?
thx and regards
*push*
does anyone have an idea?
Youre probably going to have to edit your registry if you want to keep your weather, etc running and disable the notification. Justt google "windows mobile registry editor" and im sure youll find it. After installing it comes the fun part. You get to search your registry for the value that controlls that notification, it will have a name indicating the function, something like "DataConnectionNotification" or something similar, and its value will be 1. You will want to change it to 0. Findinf it will be the tough part, theres a ton of folders in the phones registry, and some of the names of the values can be kinda cryptic. But you should be able to find it with a little time and common sense. I would start my search in HKCU/Software/HTC/builtin/ril (might not be exact path) and if its not in there, expand your search. Maybe someone will be kind and post exactly where it is in your registry, I cant search rt now Im on my phone
Thx for the advice
the only thing I found was on:
HKCU/Software/HTC/ConnectionSetup
there I changed the value "Enable Autonotify" from 1 to 0
but it seems not to be the right one since the notification is not gone...
it would be nice if somebody could help me finding the right registry entry?

Categories

Resources