Hi,
I have converted by BA to be used just a navigation device. I am looking for a functionality which will convert my BA to make and receive calls through my other NOKIA phone using bluetooth while my navigation system is on.
I other words I would like it to be used just as a handfree car kit with dialing capabilites.
Does any one know about some bluetooth patch / upgrade which will help me achive this
I am willing to experiement with upgrades to WM 5.0 if needed
Thanks
no as since it has it's own GSM modem/phone module they didn't seem to need that feature of dialing another phone. However there is a small semi hack for Dial up neworking but that wouldn't help you for voice calls
You SHOULD be able to setup voice dialing and setup speakerphone to run even with satnav in backgroun, just bin d a hardware button then to the sat nav software maybe?
Related
I am getting a little worried here.
It is advertised everywhere that the xda IIs has voice dial, which to me reffers to me talking into a bt headset and it calls that contact.
If this is not possible, can fonix ispeak sort it?
The device comes with fonix voicedial software, but it does not work through the headset. I have my MDAIII mounted on the windscreen in the car and manage to use voicedial to make calls with over 90% accuracy and then talk through my jabra bt headset.
Which unit do you have PDA2K or IIs? I haven't seen any postings yet comparing the two devices, O2 may have addressed some BT issues before launching the IIs.
I won't have one (IIs, already have PDA2K) till next week.
getting the 2's next week. new officail date is the 15th nov. so should recieve it on the 16th
So what does it take to make this work? is it impossible. Can we not do something?
it take it that this product is using the mic hardware and not bluetooth mic?
http://shop.store.yahoo.com/cellpoint/padrblvoreha.html
Anyone come acrross this before: (scroll down to Kai’s Bluetooth Headset Patch 2004 )
http://www.pocketpcmag.com/_archives/sep04/bluetooth.asp
could something simular be done on the xda's
Or is this something where only ever going to get to use with bluetooth v2?
read this an help me please
http://forum.xda-developers.com/viewtopic.php?t=12824&highlight=
Its good to see progress being made but the main problem still is a hard ware based. The mic and speaker in phone hardware need to be bridged with the ppc... which gets me thinking.....as we can speak into ppc and listen to the caller then once we BT the call it was bridge/switch it.... dont understand why something so simple and a much required feature is missing :?
Hi,
I have installed the trial version of MS command and it seems to be doing the trick... I have a qtek 9090 and I did not see any installed software for voice dialing... Is it only on PDA2K?
Thanks.
Anonymous said:
Hi,
I have installed the trial version of MS command and it seems to be doing the trick... I have a qtek 9090 and I did not see any installed software for voice dialing... Is it only on PDA2K?
Thanks.
Click to expand...
Click to collapse
MS Command doesn't support bluetooth headsets either.
From the MS blurb: "Bluetooth Headset Support - Voice Command does not support using a Bluetooth headset to initiate a voice command but you can use a Bluetooth headset during the phone conversation."
So its the same as fonix. You have to speak the dialling command into the device, and it only transfers to the bluetooth headset when the device starts dialling out. If you can put up with that, fonix works pretty well.
JD
Well as much as I was looking forward to getting a PDA2K or SX-66, I feel that this is a MAJOR drawback that has me thinking twice. I read that your cannot initiate VOICE calls using a BlueTooth headset no matter what software you are running. Is this accurate?
If so, then why can the Audiovox SMT5600 do it by the way of voice tags?
Thanks,
Frank
Previous ms smartphones and pocket pc phones have not supported the bluetooth handsfree profile which would allow voice dialling. Since the new devices now support it its up to the software developers to implement it in their software. For example, using my SE HBH-200 on my imate PDA2K i can initiate voice dialling on the headset but on the imate there is nothing to interface with. If the Audiovox can do it there is no reason why a more powerful pocket pc cant do it as well
I have installed the Faria ROM on my Hermes and I can tell I am quite happy with it. Only thing I can't get to work is to use my Hermes with my AUDI built in handsfree carkit. I am able to get connected with it and I am also able to do phone calls, only thing is that there is no access to my phonebook, I also have tried to set the bluetooth to allow remot sim access, but still doesn't work. Does anybody know if there is a nweer bluetooth driver out there? Will be happy for any suggestion.
Thanks
Duke
I have Chryslers U-Connect and it accesses my phonebook I put into U-Connect. when connected , I have never been able to access my phonebook from my phone.
@pumpiron, sorry for the silly question, but what is U-connect and where would I get that from?
It comes with Chrysler Products. Check it out...http://www.jeep.com/crossbrand/uconnect/jeep/interface.html
Sorry to bring up this oldie, but I am now having this issue when trying to connect my bluetooth to my Kenwood radio. Downloading is extremely slow. These are the things I used to be able to do before I flash my Hermes with a new WinMo 6.5 ROM:
1. Dial a number through the radio. I now have to dial from the phone.
2. Calls log is not being downloaded. The only thing that shows up is the contacts list.
3. Simultaneous actions. Before the flash I used to be able to dial a number while information was being taken from the phone to the radio. This is no longer the case. I have to wait until info is downloaded before being able to make a call. This also prevents me from answering incoming calls.
Is there anyway to check what version of bluetooth (if any) is on the phone or if there's some type of upgrade?
Appreciate any help.
can anyone post cab for my tp2? thank you
I would like to have this CAB too, missing voicedailing on my TP2
I try this , it work well on mic of phone, but it don't work on BT activate.
CVSD for WM6 v1 2 build 61226 1 cab
http://www.filestube.com/bbd28aaa9252901403ea/details.html
How come the bluetooth does not work? is it due to a setting of the phone, or just not possible? because I installed the voice dailer and it works, however when I try to start the voice dailing with my BT headset it does notting. I have to manually call someone. On the diamond, which I had before this one, this worked flawlessly.
So does anyone know anything about this, or should I use a different tool to use voice dialing with my BT headset?
flux20 said:
How come the bluetooth does not work? is it due to a setting of the phone, or just not possible? because I installed the voice dailer and it works, however when I try to start the voice dailing with my BT headset it does notting. I have to manually call someone. On the diamond, which I had before this one, this worked flawlessly.
So does anyone know anything about this, or should I use a different tool to use voice dialing with my BT headset?
Click to expand...
Click to collapse
yes, I need to know too.
spend a whole day in cyberspace to solve this problem...this is what worked on my Diamond2 (with WM 6.5 ROM):
http://forum.xda-developers.com/showthread.php?t=463090
see #7
Check Registry Settings:
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand]
"VoiceCmdEnable"=dword:00000000
"LaunchAPEnable"=dword:00000000
Hope it helps!
Need a help to make T7373RUS works with bluetooth mono handsfree.
Actually it works with, but does not the whole functionality, one thing is missing - it's a voice dialing via pressing call button on BT handsfree. OK, I know T7373 (non USA) does not have any voice dialing, but this is a WM, well I set up VITO VoiceDialer and it works perfect. But there is a problem - my bluetooth handsfree don't launch it. I've tryed to use wired handsfree it works perfect. What is a point, why such perfect phone cannot does that any nokia or SE phone does like a piece of cake.
Please help, this is really sad thing need to be fixed, can some one to figure out how to solve this?
May be anyone know USA version of Tp2 uses the same bluetooth stack?
May be some parts of USA version software is possible to integrate into my TP2?
Does anybody use Bluetooth handsfree with HTC TouchPro2????
Hey i just got a bt head set and when i push the main button it will only redial or end calls i can not get it to activate voice dialing on my x1. I dont think there is anything wrong on my bt head set i think i am missing a setting on my x1? any help
Hi,I had the same issues but after a lot of messing about I managed to get my Plansonic BT H/S working with voice activation. I used the MS voice software and I had to install a bluetooth interface gateway whos name eludes me but I can find it out if neccessary.All the info is on this forum its just spread over lots of different threads,and I found that even then I had to faff about with various setting to get it to put the audio through the H/S and not the speaker,so you can do it, but it has a tendency to just not work when you want it to so I just press buttons on the phone instead.If you want the gateway sw name get back to me.
Rich