can we reset call timers? - JASJAR, XDA Exec, MDA Pro Software Upgrading

is it possible to reset call timers ...... cuz i have tried it wid hard reset but waz of no use ?

please do a search.

Resetting call timers belongs to the same league as IMEI-changing.
It involves direct access to the RADIO-part of your phone and can render it useless easily.
Cheers,
vma

vma said:
Resetting call timers belongs to the same league as IMEI-changing.
It involves direct access to the RADIO-part of your phone and can render it useless easily.
Cheers,
vma
Click to expand...
Click to collapse
lies!
1 bootloader command can't brick your phone.
japun
http://buzzdev.net/index.php?option=com_phorum&Itemid=125&phorum_query=read,40,8283,30192

thanx but wat is mtty ?

Hi,
What I said where no lies and when you say "a bootloader command cannot brick your phone" then you don't know what you are talking about.
Notice that I did use the word "CAN".
For your information:
mtty is a tool to communicate through a serial communication, which is actually made through USB (tunnel).
With it you can send commands through the bootloader directly to the microcontroller of the radio part of the phone, which is a chip/device of it's own.
If you make a mistake sending those at-commands, you may i.e. change the way it communicates with the rest of the phone, thus you render it useless. If you know what you are doing, that should not happen.
Cheers,
vma

vma said:
Hi,
If you make a mistake sending those at-commands, you may i.e. change the way it communicates with the rest of the phone, thus you render it useless. If you know what you are doing, that should not happen.
Cheers,
vma
Click to expand...
Click to collapse
what's that with? [email protected]?
I challenge someone to be idiotic enough to brick their phone through the standard AT interpreter.

Ok. I reconsider what I said.
By the way: is there a known list of AT commands?
Cheers,
vma

vma said:
Ok. I reconsider what I said.
By the way: is there a known list of AT commands?
Cheers,
vma
Click to expand...
Click to collapse
check out the tecnical information on the Universal's wiki page.

I did. Only Bootloader commands are listed, not the AT-commands.
Cheers,
vma

vma said:
I did. Only Bootloader commands are listed, not the AT-commands.
Cheers,
vma
Click to expand...
Click to collapse
sorry about that, overlooked that. got to ask the bootloader gurus.

The purpose of reset the call timer?
To sell the phone as new?

CWKJ said:
The purpose of reset the call timer?
To sell the phone as new?
Click to expand...
Click to collapse
I think you can't bluff the physical condition

Related

It's beautiful... what is it?

So i've enabled Engineering Mode on my phone. I can understand a couple of the items that it shows, but does someone have a page/manual that defines what each one is?
I actually know a little about cell phone networks, so a description of each field would be a great start .
Thanks,
A.
apadua said:
So i've enabled Engineering Mode on my phone. I can understand a couple of the items that it shows, but does someone have a page/manual that defines what each one is?
I actually know a little about cell phone networks, so a description of each field would be a great start .
Thanks,
A.
Click to expand...
Click to collapse
Maybe you cano post how to enter engineering mode?
Also exactly what are the items you want explained?
\HKEY_LOCAL_MACHINE\Software\HTC\EngineerMode
Set it to 1
Then call *#*#364#*#*
apadua said:
\HKEY_LOCAL_MACHINE\Software\HTC\EngineerMode
Set it to 1
Then call *#*#364#*#*
Click to expand...
Click to collapse
It seems that I don't have this registry key in my QTEK9000 so i cannot help you. Sorry.
the key is only for HTC Wizard (and maybe Charmer)
Is there anything like this for the Universal?
I'm all for seeing things that other people don't usually see =)

Issue installing skype

hello. I am having an issue installing skype on my smartphone. It currently has the Rogers ROM on it (yes, I changed it again )... Active Sync gets it on the phone alright, but the issue is when it starts to install on the phone, it comes up with a notice that I have insufficient privileges to continue. I have already tried the Application unlocked, but that just tells me that my phone is not unlockable.
I search around and found that the issue may be that the installer is trying to set some registry keys that it is not supposed to and to alter the .cab file. But I cant find the .cab file on my phone anywhere, so I dont know how i can go about modifying it. The PC-side installer is just an .exe file.
I also soft-restarted my phone to clear memery, so that is not an issue eaither.
Can anybody lend some insight to this issue?
thanks
have you tried this???
telwell said:
have you tried this???
Click to expand...
Click to collapse
Absolutely right - this should fix it
Thanks it works great I was running the unlocker that unlocks your phone for ROM updates... Wrong one I guess...
Another question.... I have a commmanager I want to install, but I cant overwrite /windows/commmanager.exe... I tried TotalCommander but I still cant rename or delete the old file, and when I set readonly to false, the setting does not 'stick' although I get no error...
Can anybody help me? Thanks...
are you running vista?
i had the same read only problem, id deselect readonly and it would switch back when remaping the tzones key on(vista) when i switched to an XP box, i had no trouble..
what comm man. are you tring to use?
telwell said:
i had the same read only problem, id deselect readonly and it would switch back when remaping the tzones key on(vista) when i switched to an XP box, i had no trouble..
what comm man. are you tring to use?
Click to expand...
Click to collapse
The one in that total smartphone makeover thread.
Wait - are you using total commander on the phone itself? Thats what im doing. I am using XP, but when I install total commander I cannot figure out how to browse my phone with it... I googled the hell out of it, but there is no option i can see that allows me to use the phone...
Is there any insight into this issue?
thanks
NorseLaQuet said:
The one in that total smartphone makeover thread.
Wait - are you using total commander on the phone itself? Thats what im doing. I am using XP, but when I install total commander I cannot figure out how to browse my phone with it... I googled the hell out of it, but there is no option i can see that allows me to use the phone...
Is there any insight into this issue?
thanks
Click to expand...
Click to collapse
it has been a while since i solved this issue and i cant seem to figure it out again! ill keep trying to help...
i thought it was just a vista problem ... and worked no prob. with XP... guess not.
NorseLaQuet said:
The one in that total smartphone makeover thread.
Click to expand...
Click to collapse
btw, where is this thread.. i cant seem to find it???
telwell said:
btw, where is this thread.. i cant seem to find it???
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=342708
I bet youve seen it before, its quite slick.
Thanks for all your help, its really appreciated. Its crazy how I can call myself very computer literate (I work as a web/app/game developer, computer repair person and computer builder), yet I'm always learning/screwing things up/figuring things out/asking for help every day! However it always feels nice to stumble on a forum where the people know what the hell they are talking about.
yeah, the folks here know there stuff.. lots of new things to learn for me too!!
id like to get skype working on my phone... let me know if you get it going... shoot me a PM.
HTC S621
telwell said:
have you tried this???
Click to expand...
Click to collapse
How do I run the unlocker?
Kaponya said:
How do I run the unlocker?
Click to expand...
Click to collapse
Welcome to the forums, kaponya
If u are using the same rogers rom, all u need to do is to download the cab file in that thread, copy it into your phone using activesync or bluetooth, and then just click on it, which will execute the program, and you might be asked to restart the phone for full effect.
Cheers
Well, since a new user has bumped the skype thread, has anyone been able to direct the sound thru the earpiece, and not the external speaker, in a satisfactory way yet?
ccpraveen said:
Well, since a new user has bumped the skype thread, has anyone been able to direct the sound thru the earpiece, and not the external speaker, in a satisfactory way yet?
Click to expand...
Click to collapse
Nope, I believe that it can only be done through the speaker... I was messing around with it and I could not get it to do it through the earpiece... maybe someone knows how to do it but I tried and no success.

Call Duration Timers

I wonder if someone know how to reset Call Duration Timers which are located in Settings->System->Device Information->Call Duration tab.
Any solutions for this?? Any apps to reset??
This is from a different OLD post but it worked, so share and share alike.....
a). Please make sure that you are SuperCID and you understand the importance of hard spl as this maybe a dangerious operation for you.
b). Make sure that you have SPL 1.10 Olipro (this one works for me, higher version seems not work)
c). Downloan Mtty.exe file in the attachment below and save it to your computer.
d). Open connection setting of your activesync or WMDC on your PC and disable "Allow USB connection".
e). Put your divice into Bootloader mode and connect to your PC via USB
f). Run Mtty.exe from your PC
g). Selec "USB" in port box and then click OK
h). Press Enter once or twice to let the screen dispay "USB>" or "CMD>"
i). Type "rtask b" and Enter then it should show result "0"
j). then type "ate1" and Enter then it should show result "0"
k).then type "atv1" and Enter then it should show result "OK"
l). then type "[email protected]=270f,270f" and Enter then it should show result "OK"
Restart you PPC.... you call timer should be 00.00.00
Cheers...
thanks brother, but where is attached Mtty.exe ????
ultramag69 said:
This is from a different OLD post but it worked, so share and share alike.....
a). Please make sure that you are SuperCID and you understand the importance of hard spl as this maybe a dangerious operation for you.
b). Make sure that you have SPL 1.10 Olipro (this one works for me, higher version seems not work)
c). Downloan Mtty.exe file in the attachment below and save it to your computer.
d). Open connection setting of your activesync or WMDC on your PC and disable "Allow USB connection".
e). Put your divice into Bootloader mode and connect to your PC via USB
f). Run Mtty.exe from your PC
g). Selec "USB" in port box and then click OK
h). Press Enter once or twice to let the screen dispay "USB>" or "CMD>"
i). Type "rtask b" and Enter then it should show result "0"
j). then type "ate1" and Enter then it should show result "0"
k).then type "atv1" and Enter then it should show result "OK"
l). then type "[email protected]=270f,270f" and Enter then it should show result "OK"
Restart you PPC.... you call timer should be 00.00.00
Cheers...
Click to expand...
Click to collapse
lol thats a lotta BS just to reset call timers is it that important?
Sorry rexmundi, that was just a txt file I have, If you do a quick search on the forum you'll find MTTY...
And yes, it was important, It shows I have COMPLETE mastery of my Hermes.... Mwah hah hah hah!!!!
Hehe, naw complete mastery would be changing the IMEI numbers.
rexmundi said:
I wonder if someone know how to reset Call Duration Timers which are located in Settings->System->Device Information->Call Duration tab.
Any solutions for this?? Any apps to reset??
Click to expand...
Click to collapse
There's a tool on here that is much simpler to use than MTTY. Just searched my files but I can't find it.
Try using google search on XDA for call timer reset tool and see what you can find.
Cheers
WB
carcomp said:
Hehe, naw complete mastery would be changing the IMEI numbers.
Click to expand...
Click to collapse
You can, but I aint showing you how!
I am still of the opinion anyone wanting to reset the call timers or change the IMEI is doing it for the purposes of deception. My 2cents but as a member has already asked....is it THAT important to reset the timers for anything legit??
Just something to think about people.
carcomp, Got the instructions on how to do that too, But decency , and a healthy respect for the law prohibits my using it....
Cheers...
mrvanx said:
You can, but I aint showing you how!
I am still of the opinion anyone wanting to reset the call timers or change the IMEI is doing it for the purposes of deception.
Click to expand...
Click to collapse
Mr Vanx,
Can you clarify please? Is resetting the call timers to zero illegal? If yes then I will withdraw my post above. If not then we have to assume that the OP has a legitimate interest.
I am comfortable that the IMEI thing is seriously dodgy but call timer resetting as a non legitimate activity is news to me.
Let us know so we all know where we legally stand.
Many thanks
WB
wacky.banana said:
Mr Vanx,
Can you clarify please? Is resetting the call timers to zero illegal? If yes then I will withdraw my post above. If not then we have to assume that the OP has a legitimate interest.
I am comfortable that the IMEI thing is seriously dodgy but call timer resetting as a non legitimate activity is news to me.
Let us know so we all know where we legally stand.
Many thanks
WB
Click to expand...
Click to collapse
Its not illegal to reset the call timers, but personally I see no reason to do it unless somebody is being deceived into buying a supposedly unused device?! I just dont see what other reason there would be to reset the timers thats all.
wacky.banana said:
Mr Vanx,
Can you clarify please? Is resetting the call timers to zero illegal? If yes then I will withdraw my post above. If not then we have to assume that the OP has a legitimate interest.
I am comfortable that the IMEI thing is seriously dodgy but call timer resetting as a non legitimate activity is news to me.
Let us know so we all know where we legally stand.
Many thanks
WB
Click to expand...
Click to collapse
Yes it will be illegal if you reset your call timer and list the phone in ebay as a brand new phone. But if you dont do that, then its all good!
mrvanx said:
Its not illegal to reset the call timers, but personally I see no reason to do it unless somebody is being deceived into buying a supposedly unused device?! I just dont see what other reason there would be to reset the timers thats all.
Click to expand...
Click to collapse
Thanks for the clarification. I was just beginning to be concerned that I might have given advice that could be construed as assisting an illegal activity!
I can see that zeroing the timers and eg putting a phone on ebay as a new phone when it is not could be an issue. However if I bought an item 2nd hand from someone in good faith and installed the rom of my choice, then I would want to zero the counters from the point at which I owned the device simply so I could have a true record of the calls I was responsible for making when ownership changed hands. For the record I have never had to use this tool.
A lot depends on the honesty of individuals; however almost anything that man has invented can be abused or put to a use that is negative, destructive or illegal. Take the abuse of drugs in our society as an example of what I mean.....
WB
What about if a person buys a phone off of Ebay or a friend and wants to start clean? Whould he be in the right to start with a 0 call timer since all previous calls were not made by him?
mrvanx said:
Its not illegal to reset the call timers, but personally I see no reason to do it unless somebody is being deceived into buying a supposedly unused device?! I just dont see what other reason there would be to reset the timers thats all.
Click to expand...
Click to collapse
so you are saying that when I asked about call duration timers reset I want to sell my Hermes to someone as brand new?????????
i think moderators are inteligent people but one of moderators in this forum are stupidly judging people without knowing them
mrvanx you are stupid thinking this way !!!!!!!!!!!!!!!!!!!!
rexmundi said:
so you are saying that when I asked about call duration timers reset I want to sell my Hermes to someone as brand new?????????
i think moderators are inteligent people but one of moderators in this forum are stupidly judging people without knowing them
mrvanx you are stupid thinking this way !!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
So what is the reason to reset the call timer?
For the reason we try to do anything here - to see if we can....
rexmundi said:
so you are saying that when I asked about call duration timers reset I want to sell my Hermes to someone as brand new?????????
i think moderators are inteligent people but one of moderators in this forum are stupidly judging people without knowing them
mrvanx you are stupid thinking this way !!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
well well, thats a 2 day ban sir, suggest you look at the posting guidelines in my sig.
Resurrecting this thread just to say that i am taking as a personal jab, i have no hesitation AT ALL in taking this further. Its very easy to NOT have a pop at a member/moderator but you seem incapable of it.
And the correct grammer is :
i think moderators are inteligent people but one of moderators in this forum is stupidly judging people without knowing them
Click to expand...
Click to collapse
See I can be childish aswell!!
If you bother to search for this topic before you will see that in numerous occasions I have voiced my concerns about this subject, in no way was it a jab at the OP. Congrats, you have been made an example of.

What exactly are the requirements to install Kavana's rom??

hi
this is probably a stupid question, the last time i did any rom updating was with an old UK SDA II to some imate rom.
ok,
i recently purchased a used BT s620 phone which is locked to BT.
do i need to get it CID unlocked and SIM unlocked??- ive already got it application unlocked.
how much would i be looking to pay in order to get it CID and SIM unlocked??
the reason i ask these questions is because in KAVANA's post it says the wizard does all the unlocking?? does that mean i wont need to do any CID and SIM unlocking??
cheers
spitfire123123 said:
hi
this is probably a stupid question, the last time i did any rom updating was with an old UK SDA II to some imate rom.
ok,
i recently purchased a used BT s620 phone which is locked to BT.
do i need to get it CID unlocked and SIM unlocked??- ive already got it application unlocked.
how much would i be looking to pay in order to get it CID and SIM unlocked??
the reason i ask these questions is because in KAVANA's post it says the wizard does all the unlocking?? does that mean i wont need to do any CID and SIM unlocking??
cheers
Click to expand...
Click to collapse
you are correct. Kavana has built in the Jump SPL CID bypass function so it bypasses "reading " the CID when installing the ROM and you dont' need your phone to be SIM unlocked to install it either.
I'm also a BT user and flashed with Kavana Ricky Remade, just follow the instructions, Hard Reset s620 before, no need for any extra software, the only problem i have is MMS doesn't work but then i never have used MMS.
spitfire123123 said:
hi
this is probably a stupid question, the last time i did any rom updating was with an old UK SDA II to some imate rom.
ok,
i recently purchased a used BT s620 phone which is locked to BT.
do i need to get it CID unlocked and SIM unlocked??- ive already got it application unlocked.
how much would i be looking to pay in order to get it CID and SIM unlocked??
the reason i ask these questions is because in KAVANA's post it says the wizard does all the unlocking?? does that mean i wont need to do any CID and SIM unlocking??
cheers
Click to expand...
Click to collapse
Great, i shall be doing that reite now!
just a quick question, how much should i be expecting to pay to get it sim unlocked??- could you point me in the right direction??
thanks for you help.
edit: just saw the post above, how would i go about hard ressetting??
and i take it youre still with BT or have you unlocked your phone? if so how..
to be on the safe side... make sure you hard reset your phone b-4 the install, and also PLEASE MAKE SURE you remove your storage card if you have one installed
http://forum.xda-developers.com/showthread.php?t=355789&highlight=sim+unlock Sim Unlock
http://farm4.static.flickr.com/3115/2541775762_85aa3db274_o.jpg Hard Reset
I'm still with BT as provider.
Kavana Ricky Remade has more options for tweaking of phone, have a look http://forum.xda-developers.com/showthread.php?t=397845
spitfire123123 said:
Great, i shall be doing that reite now!
just a quick question, how much should i be expecting to pay to get it sim unlocked??- could you point me in the right direction??
thanks for you help.
edit: just saw the post above, how would i go about hard ressetting??
and i take it youre still with BT or have you unlocked your phone? if so how..
Click to expand...
Click to collapse
stylez said:
http://forum.xda-developers.com/showthread.php?t=355789&highlight=sim+unlock Sim Unlock
http://farm4.static.flickr.com/3115/2541775762_85aa3db274_o.jpg Hard Reset
I'm still with BT as provider.
Kavana Ricky Remade has more options for tweaking of phone, have a look http://forum.xda-developers.com/showthread.php?t=397845
Click to expand...
Click to collapse
hi
SUCCESS!
thanks guys, now all i need is to sim unlock it.
how much will that guy be charging me
cheers
spitfire123123 said:
hi
SUCCESS!
thanks guys, now all i need is to sim unlock it.
how much will that guy be charging me
cheers
Click to expand...
Click to collapse
Send the creator of thread a PM, i think it's $10 or something like that? Yes i be guessin.
stylez said:
Send the creator of thread a PM, i think it's $10 or something like that? Yes i be guessin.
Click to expand...
Click to collapse
nice, 10 dollars is fine
an annoying problem however(2 infact) :
1. the phone beeps every time the lcd switches off to save power. how would i disable that
2. and i cannot make full use of the qwerty keyboard as the number keys work like a regular phones keys....
thanks for all the help guys
Which ROM did you go for?
You will want the eT9.cab bit about in here http://www.beta.bt.com/bta/forums/thread.jspa?threadID=4012&start=0&tstart=0
The beep not sure about is your wi-fi on because it beeps when the lcd switches off, in the sounds settings everything below and including SIM toolkit messages i have turned off.
spitfire123123 said:
nice, 10 dollars is fine
an annoying problem however(2 infact) :
1. the phone beeps every time the lcd switches off to save power. how would i disable that
2. and i cannot make full use of the qwerty keyboard as the number keys work like a regular phones keys....
thanks for all the help guys
Click to expand...
Click to collapse
stylez said:
Which ROM did you go for?
You will want the eT9.cab bit about in here http://www.beta.bt.com/bta/forums/thread.jspa?threadID=4012&start=0&tstart=0
The beep not sure about is your wi-fi on because it beeps when the lcd switches off, in the sounds settings everything below and including SIM toolkit messages i have turned off.
Click to expand...
Click to collapse
hi
i went for kavanas rom.
it is as if the function keys are unresponsive so i cant change from numbers to letters...
what does this et9.cab do?
and yes i have wifi on- should i just switch off all the sounds accept vital ones?
cheers
edit:
still makes the annoying beep even though there are no sounds accept ringtones
spitfire123123 said:
hi
i went for kavanas rom.
it is as if the function keys are unresponsive so i cant change from numbers to letters...
what does this et9.cab do?
and yes i have wifi on- should i just switch off all the sounds accept vital ones?
cheers
Click to expand...
Click to collapse
eT9.cab sets the uk keyboard layout, some of my layout are not correct don't get :;
Follow the instruction on link.
There is also a bit on the Kavana thread about this.
I still get the beep when the screen goes out as the wi-fi disconnects, just turn the others off through choice, i hate phone noises.
Except obviously the noise of my Pendulum ringtone and the classic WM text tone.
DUDE!
pendulum rule!!
which one is it??
you got propane nightmares yet??
oh yeah- i figured out how to get rid of the wifi beep with an ingenius idea.
ill post you a link of my thread.
Visions as it always get's me going.
The new album is ace "Samey samey with more vocals"
I Dj'd a night with Pendulum played the Hip-Hop floor downstairs.
Did you get the key layout sorted?
Interested in how you stopped beep but think i know?
spitfire123123 said:
DUDE!
pendulum rule!!
which one is it??
you got propane nightmares yet??
oh yeah- i figured out how to get rid of the wifi beep with an ingenius idea.
ill post you a link of my thread.
Click to expand...
Click to collapse
well, i know the file- ding.wav
ive found it in the windows folder of the fones memory.
my theory was just to replace it with an empty silent ding.wav (attached)
but i cant edit the read only files i just found out- or can you? maybe a different file editor.
what was your way
spitfire123123 said:
well, i know the file- ding.wav
ive found it in the windows folder of the fones memory.
my theory was just to replace it with an empty silent ding.wav (attached)
but i cant edit the read only files i just found out- or can you? maybe a different file editor.
what was your way
Click to expand...
Click to collapse
I thought that was the idea, use Resco Explorer find the file in question check properties "action/properties" to make sure not protected read only & copy over it. "Keep a copy of original sound just in case"
ive tried it with resco- hopefully it works.
edit:
no joy- looks like im going to have to make a seperate post
Hi, first time poster, short time reader (Hey, only had the Dash for a week). Previous phone was a Q on Verizon.
Kavana image is wonderful and saved me from wanting to throw my Dash (with T-mobile image) against a wall.
Quick Question: Is the Dash Sim unlocked because we replaced the ROM? Or is it still carrier locked?
It's still locked.
Call your provider and ask for the unlock code.
Mikey1022 said:
It's still locked.
Call your provider and ask for the unlock code.
Click to expand...
Click to collapse
Thanks Mike.

##DATA# Menu

Edited due to objections by other members.
MikeBrWade said:
Is there a manual or an explanation of what each of the settings does?
Sent from my Evo using XDA App
Click to expand...
Click to collapse
dude.....why would you put this in development...really
post in qa
Edited due to objections by other members.
MikeBrWade said:
Is there a manual or an explanation of what each of the settings does?
Sent from my Evo using XDA App
Click to expand...
Click to collapse
I hate useing this cop out, but if you need a user guide for editing these functions then you really don't need to be messing with stuff in there. If you're told to change something.. make that one change and get out of that menu.. other than that you can google each setting to find out what they do if you REALLY must know.
This is one of the only places on a phone that if you screw mess with stuff you can brick your phone
... well maybe brick isn't the correct term... you'll go from smartphone to pda if you change the wrong thing, and it is very easy to change the wrong thing.
an RUU will not fix what you **** with in there. just an FYI.
can someone do me a favor, some else in another forum told me to change some settings, which i believe fck my phone can you guys check if under wimax, your guys NAI adress is the same as your Wimax MAC adress plz thank you
jonathaflores said:
can someone do me a favor, some else in another forum told me to change some settings, which i believe fck my phone can you guys check if under wimax, your guys NAI adress is the same as your Wimax MAC adress plz thank you
Click to expand...
Click to collapse
Yes, it is the same.
Always be prudent in knowing "what" you're changing and "why". May prevent / lessen future problems.
johnsongrantr said:
I hate useing this cop out, but if you need a user guide for editing these functions then you really don't need to be messing with stuff in there. If you're told to change something.. make that one change and get out of that menu.. other than that you can google each setting to find out what they do if you REALLY must know.
This is one of the only places on a phone that if you screw mess with stuff you can brick your phone
... well maybe brick isn't the correct term... you'll go from smartphone to pda if you change the wrong thing, and it is very easy to change the wrong thing.
an RUU will not fix what you **** with in there. just an FYI.
Click to expand...
Click to collapse
Is that legitimately true? I don't think that it is. If you bork something inside the Data menu, as long as you can get back to the phone (pda since it is supposedly bricked), wouldn't all you have to do is type in ##786# (##RTN#), hit menu, and hit reset with your MSL? I believe that would fix all of the items you screw with in the data menu. I could be incorrect though.
bpdamas said:
Is that legitimately true? I don't think that it is. If you bork something inside the Data menu, as long as you can get back to the phone (pda since it is supposedly bricked), wouldn't all you have to do is type in ##786# (##RTN#), hit menu, and hit reset with your MSL? I believe that would fix all of the items you screw with in the data menu. I could be incorrect though.
Click to expand...
Click to collapse
That will useally work, but I've even seen forced provisioning on your ESN to fail in the past.
I'm sure there is stuff in there that will fix, but I doubt it will fix everything.
As a rule of thumb though, I'd suggest not even going in there unless you know what you know what you're doing.
johnsongrantr said:
That will useally work, but I've even seen forced provisioning on your ESN to fail in the past.
I'm sure there is stuff in there that will fix, but I doubt it will fix everything.
As a rule of thumb though, I'd suggest not even going in there unless you know what you know what you're doing.
Click to expand...
Click to collapse
I would agree to that. You should never attempt anything unless you know what you're doing. Unless of course you are fully prepared to face the consequences.
Edited due to objections by other members.
Edited due to objections by other members.
Nice thank you for posting that info.
Sent from my PC36100 using XDA App
Edited due to objections by other members.
........
Edited due to objections by other members.

Categories

Resources