Related
---------------2006/May31 Updated---------------------------------------
------------------------------------------------------------------------------
＠繁体字OS
Traditional Chinese ROM <QTEK 130 AKU2 + A2DP +Push Mail ROM>
ftp://[email protected]/Universal/DarkForce_CHS130.rar
＠簡体字OS
Simplized Chinese ROM <QTEK 130 AKU2 + A2DP +Push Mail ROM>
ftp://[email protected]/Universal/DarkForce_CHT_130.rar
PLS use Extrom files which are in above archives to run correctly
See the detaile on next page and use as your own risk!
----------------------------------------------------------------------------
----------------Previouse POST-----No More following ROM----------
it took 2 hours to upload!!!!
http://www.asukal.jp/123/imate13_CHT.rar__65MB
Traditional Chinese130764 Universal
@Upgrade_Utililty.zip
*nk.nbf was my edited ROM of i-mate "JASJAR_WWE_13076_164_10900_wwe_ship" with
the wince.nls and Tarisk Font, enable to encode Japanese/S&T Chinese/Korean/Thailand.
(80% of its interface is Traditional Chinese)
*Radio.nbf and ms_.nbf are not included. pls dl offical one to flash.
*use MaUpgradeUt_noID.exe to make Falsh the ROM.
suggest to connect PC with "Sireal mode" = Light button + Power button +Stylus.
------------------------------------------------------------------
***The Templates.zip and Extrom_Unhider.cab---and Asukal.cab
@while first boot from Flasing ROM, some letters are not discribed correctly,
Such like a ????????. do not care.
@The Doctor Johnson screen to aline the stylus will be come every time after soft reset.
Please delete the short cut of "Welcome.exe" in the \windows\StartUp folder.
No more Dr,Johnson.
@using a Pocket Word, to make New Documents, you will find the error.
You make the "Templates" folder in My Documents with Chines Folder name.
The place the all templates in this archive.
No more error.
@Asukal.cab.==pls install this after finish 1st reboot from installation of Extended ROM files.
Then make soft reset again.
@Extrom_Unhider.cab is to unhide the Extended ROM.
Old Unlocker is not work, just install this cab and make soft reset,
ExtROM will visuable and workable.
http://forum.xda-developers.com/viewtopic.php?p=240986&sid=9e9c8acfa34bb46c11688318be09adb4#240986
Thanks for Mr.sef
Still not perfect and sometimes hang up if you toggle the Today Plug-in.
Pls try as your won risk.
If you feel so bad coz of the OS is not stable, pls use without Asukal.cab.
Less Chinese Interface, but more stable.
or make disable the Device Lock on the Today Screen.
Good Luck
Thanks again for the great word....
Actually I prefer to use English OS interface with the ability to read chinese only.....(I think it should be easiler to build??)
But this one is ok as I didn't install your cab file.
Thanks a lot.
Cheers,
Thanks again , will try today
CJK+Thai wince.nls and font in New I-mate ROM1.3
this is the new one only wince.nls and font, also font registry.
http://www.asukal.jp/123/v13enROM_CJK.rar 65MB
radio.nbf and ms_.nbf for Extended ROM, are not included)
PLS try, so nice! i hope...
1st one i uploaded, if you use Asukal.cab, the more mui can work.
those mui were made from old WM5, so they are not match well with
new os.
for example, thres.dll, old version dll doesnt have "Device Lock",
But new thres.dll have it, so if you use Device Lock on Today, OS will hang up.
Many of dll are different from OLD WM5, i suggest this rom only use for
test.(but without using asukal.cab, not so bad)
Good luck!
The first one after flush look great but install Asukal.cab the today plugin
will be stop try to reset can't be done.
try to install Sino_SIP_No5.zip to hand write , don't work please advise ,
also Monster SIP can't use either , I will text tomorrow and give you freeback
the default chinese input method from dopod 900?
hi asukal,
can you include the chinese input method from dopod 900 to the wwe rom devices?
need it very much!
hanks
Parker
[email protected]
ya, i have found many difference in dll between previouse and new ROM.
so some of mui is not compartible.
i found after made this 1st rom
so i suggest do not use asukal.cab pls, or use 2nd rom.
now i making new mui with dll from new rom.
[email protected]
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.
do someboday sent me a whole registry from Dopod900 chines OS?
i will try but take time and
i am willing to get it for you!
but how?
can you tell me how to do it?
thanks!
Asukal said:
[email protected]
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.
do someboday sent me a whole registry from Dopod900 chines OS?
i will try but take time and
Click to expand...
Click to collapse
Asukal, Dopod files and Modules upload to universal upload folder -- Dopod_files.rar hope that you want
Dopod_files.rar
mwang said:
Asukal said:
[email protected]
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.
do someboday sent me a whole registry from Dopod900 chines OS?
i will try but take time and
Click to expand...
Click to collapse
Asukal, Dopod files and Modules upload to universal upload folder -- Dopod_files.rar hope that you want
Click to expand...
Click to collapse
Excuse me,Would you tell me how to use the Dopod files.rar?
thanks,
but Module and file....i guess those dumped files are dead PE Header.
i need dll with correct PE headers. OK i will dump chinese ROM by my self.
but
i need whole registry value from live device, not from hive in rom.
because all 2bites registries are only in a live device, not in hive.
Asukal said:
i need whole registry value from live device, not from hive in rom.
because all 2bites registries are only in a live device, not in hive.
Click to expand...
Click to collapse
Please pm to me how to get it ,I will doing tonight
Dumping chinese ROM
Asukal said:
thanks,
but Module and file....i guess those dumped files are dead PE Header.
i need dll with correct PE headers. OK i will dump chinese ROM by my self.
but
i need whole registry value from live device, not from hive in rom.
because all 2bites registries are only in a live device, not in hive.
Click to expand...
Click to collapse
That's a great message, I'm waiting your dumper,and tell me how to return to Universal.
Thanks
How to solve inputing Chinese?
How to solve inputing Chinese?
Ce-star or system itself
No SIP for chines in it now.
you must install your favorite SIP.
to get the registry, use TRE (Tascal registry editor and export registry on device,
Asukal said:
to get the registry, use TRE (Tascal registry editor and export registry on device,
Click to expand...
Click to collapse
Done , see your pm
T-Mobile English ROM Bluetooth StereoHead set Profile
Today, the new rom of T-Mobile WWEnglish ROM with A2DP was uploaded.
i injected wince.nls and fonts which can be supported CJK+Thai in that.
uploaded here<no Chinese SIP and Interface,Just encode & font support>
http://www.asukal.jp/123/T-Mobile_A2DP.rar 52MB with MaUpgradeutlity.exe
see the captured screen shots.
http://asukal.seesaa.net/article/14749754.html
<no radio.nbf and ms_nbf were included. you have to dl from
http://forum.xda-developers.com/viewtopic.php?p=246434#246434
or
UNI_TMUK_12032_120_10600_Ship.exe
ROM version 1.20 lower than i-mate 1.30_AKU2
Thanks a lot again. I want the A2DP!!!! Yeah.
mwang said:
Asukal said:
to get the registry, use TRE (Tascal registry editor and export registry on device,
Click to expand...
Click to collapse
Done , see your pm
Click to expand...
Click to collapse
ya, i got it.
but it is not sure it can work or not
must check all regostry one by one.
i tried in my passed, still not good result.
any way, pls wait with long sight!
now i must make many kinds of rom for Japanese guys,
also trying to Get A2DP to i-mate ROM(very low possiblety to get)
also make new mui interface for AUK2,
also have to have a dinner!
also have to ,,,,,,
mwang said:
Asukal said:
to get the registry, use TRE (Tascal registry editor and export registry on device,
Click to expand...
Click to collapse
Done , see your pm
Click to expand...
Click to collapse
i am checking all registry from you.
question, i have found following value.
Is the "HanWang" one of OS SIP, or 3rd parties one installed by you?
[HKEY_LOCAL_MACHINE\SOFTWARE\HanWang]
[HKEY_LOCAL_MACHINE\SOFTWARE\HanWang\HangWang Pen for WinCE]
"Study"="0"
"Sound on"="1"
"Screen segment"="1"
"Default input panel"="0"
"Ink speed"="10"
"Ink width"="1"
"Ink color"="0"
"Ink type"="2"
"Recognizer delay"="400"
"Recognizer range"="600E"
Wait for your rplay.
i have cooked successfully more than 10 roms, WWE vesion to CHS vesion, they all work fine.
but when i want to cook a new rom based on LVSW 0320 vesion, i failed. i found that the default.hv can't be transfered to txt file, once i edit this file, os can't boot and stick on the SubSplash screen. but user.hv can do that.
sorry for post this new thread but i have posted under lvsw's thread and no one answer me.
can anyone help me plz, i really like this ROM.
thanks in advance.
i had the same problem... then i came up with a briliant solutiion
you know the user.hv and initdata can be edited without any probs..also this version of the rom deploys the ext rom aswell.. so what i did was i edited config.txt and added a cab with the HKLM etc regs that go into default.hv into the dump folder and generated a rom with that cab inside..
and VOILA... now i have a custom rom with all my settings... i figured this way out after hours of frustratingly trying to edit the default.hv
hope this helps
zohaer21 said:
i had the same problem... then i came up with a briliant solutiion
you know the user.hv and initdata can be edited without any probs..also this version of the rom deploys the ext rom aswell.. so what i did was i edited config.txt and added a cab with the HKLM etc regs that go into default.hv into the dump folder and generated a rom with that cab inside..
and VOILA... now i have a custom rom with all my settings... i figured this way out after hours of frustratingly trying to edit the default.hv
hope this helps
Click to expand...
Click to collapse
thank u, i have tried ur solution, but there is a big problem, .cab file doesn't support chinese caracter, so edit default.hv is the only way.
dont know if this would help you but take a lot here :
www.asukal.jp/hv_rom/hive2.txt
or simply use Make_HV, found it in the development & hacking thread.
First covert the hv file to rgu (which is simply REGEDIT4 Format) then make changes and convert it back.
qooqoo said:
i found that the default.hv can't be transfered to txt file, once i edit this file, os can't boot and stick on the SubSplash screen. but user.hv can do that.
Click to expand...
Click to collapse
This is my little surprise
qooqoo said:
thank u, i have tried ur solution, but there is a big problem, .cab file doesn't support chinese caracter, so edit default.hv is the only way.
Click to expand...
Click to collapse
You don't need a .cab for this. The program that goes through Config.txt can handle XML files with registry settings directly. So, grab any of the .xml files listed in Config.txt as a template for your own .xml file. Then just add your new .xml file plus a line in Config.txt referencing this new file, and you're all set.
There's another solution which I found much more convenient: use bepe's Rom Kitchen, and import whatever ROM you want. If I'm not mistaken, it's even available bundled with a Chinese ROM already. There you can edit the .rgu files from which the Registry will be created. This eliminates the need to read any of the .hv files. Worked very well for me! Also, since bepe's kitchen recreates the packet structure of the ROM, it's so much easier to understand which files and registry entries have a dependency or belong together. Highly recommended!
Cheers
Daniel
lvsw said:
This is my little surprise
Click to expand...
Click to collapse
weird suprise
lvsw said:
This is my little surprise
Click to expand...
Click to collapse
Why would that be a surprise? Is there more to this than meets the eye?
dutty said:
weird suprise
Click to expand...
Click to collapse
Indeed, I've been hitting my head against it for some days now...
lvsw said:
This is my little surprise
Click to expand...
Click to collapse
himan，give us a solution plz, it is a so good rom, but i can't add anything i want.
tadzio said:
grab any of the .xml files listed in Config.txt as a template for your own .xml file. Then just add your new .xml file plus a line in Config.txt referencing this new file, and you're all set.
Click to expand...
Click to collapse
thk u but i don't know how to edit a xml file, any suggestion?
tadzio said:
There's another solution which I found much more convenient: use bepe's Rom Kitchen, and import whatever ROM you want.
Click to expand...
Click to collapse
it is for CHT but not for CHS, there is a lot of CHT roms yet, cooked or offcial, but there isn't a official rom in CHS, a just want to convert 0320 vesion to CHS vesion.
I will be watching this thread.
Waiting for good news.
qooqoo said:
i have cooked successfully more than 10 roms, WWE vesion to CHS vesion, they all work fine.
but when i want to cook a new rom based on LVSW 0320 vesion, i failed. i found that the default.hv can't be transfered to txt file, once i edit this file, os can't boot and stick on the SubSplash screen. but user.hv can do that.
sorry for post this new thread but i have posted under lvsw's thread and no one answer me.
can anyone help me plz, i really like this ROM.
thanks in advance.
Click to expand...
Click to collapse
I have the same problem...the LVSW 0313 version was fine...then the new LVSW 0320 won't boot..stopped at the subsplash screen...it is strange that the default.hv is there but doesn't seem to booting the file.
qooqoo said:
thk u but i don't know how to edit a xml file, any suggestion?
Click to expand...
Click to collapse
Any Unicode-capable editor will do. Personally, I use UltraEdit.
Cheers
Daniel
Please don't take offense, but I'm starting to think you got the ROM as it is..."protected" that's why all the customizations are done via AutoRun.exe and xml files.
i found that lvsw 0325 edition can be edit.
qooqoo said:
i found that lvsw 0325 edition can be edit.
Click to expand...
Click to collapse
Yes, 0320 can't be edited. But 0325 could. But you can't use the regular tools..you have to use the "more Storage" tool, then just manually copy the "default.hv" and "user.hv" from the "dump" folder, use the regular tool and covert it to .reg. Then you make modifications to the registry file, convert it back to .hv and copy them back to the "dump" folder..you can add files by just copying files into the "dump" folder..after you are all done with it, just continue with the "more storage" tool to make your new-os.nb
Hi...this mine "ExtROM"........I'm use it w/ my last WM6 ROM (based on LVSW's v2.0.1.1)....however i think that it should work on any rom (wm5 too...)
Its "particular".....I have inserted some useful programs BUT...nothing are installed (alias, copied to the device)!!...everything are alredy "installed" to extrom....
I'm created it for me....so, maybe its unuseful for everybody.....
Whatsuppen:
U download this archive.........................ok
Install it as a normal rom-update (HardSPL included).............ok
So....now, after an HardReset, when the "Customization" popup appears, ONLY some shortcuts will be copied into your device (20 kb), and a few registry tweaks will be also installed (1/2 kb)...........but when you'll enter in the "Programs" directory these programs will be present:
WMP Playlist Editor
PocketRAR v3.60
AltTab (from PocketPlus)
Adobe Reader LE
VJOkButton ("JustClick" only, i'm associate it to a button...)
Spb Full Screen Keyboard (not configurable...u can access to it only from "programs" menu's icon) U
IM+ v4.41 (without Today's PlugIn) U
Chronos v3.3 U
Resco Explorer v6.10 + FTP AddOn + ZIP AddOn (without regitry addOn/cript service/today plugIn) U
Resco Photo Viewer Standard v6.33 (without video support) U
SafeMode v2.1 U
SKTools Pro v3.1.9 (only the main program) U
GroupSMS
PIM Backup v2.5
NoData
iContact v0.2 (linked to the "Contacts" icon in Programs folder)
Call Firewall v1.2
CorePlayer v1.1.1 build 1600 (without SPB-support plugin) U
Some settings for these programs
Click to expand...
Click to collapse
Note:
U = ...unregistred!
Conclusion:
10mb of (useful) programs, but only 20kb of device's memory is used!
(update: 11/08/2007)
Tnks to volospin!
ax3l.volospin.com
MIRRORs: (Tnks to DeviLduck!)
http://www.live-share.com/files/252901/ExtROM_Plus_2.0.9.8.rar.html
...or
http://rapidshare.com/files/48320322/ExtROM_Plus_2.0.9.8.rar
Click to expand...
Click to collapse
this extRom, overrite all on original Ext?
psxsnake said:
this extRom, overrite all on original Ext?
Click to expand...
Click to collapse
yes.......
Can you share with us how to do it? Thanks!
Doesn't work with bepe's rom.
...works perfectly w/ any LVSW and mUn ROMs!
ExtRom Plus
this ExtRom working on my Pepes Germany Rom..
Hello AX3L. Is there any way to get this to work with other programs?
Sorry, I followed all your instructions and I can't see anything new after ExtROM_Plus installed.
Moreover, I can't access ExtROM anywhere.
Customisation process seems not to work with ExtROM area ...
Where can I check if all was installed fine ?
You need to go to the wiki and find the cab which will unhide the extROM for you. Then in the extROM folder click shortcuts
heltem said:
Sorry, I followed all your instructions and I can't see anything new after ExtROM_Plus installed.
Moreover, I can't access ExtROM anywhere.
Customisation process seems not to work with ExtROM area ...
Where can I check if all was installed fine ?
Click to expand...
Click to collapse
follow the skaramanga's procedure or HARD-Reset your device to start the "Customitation Process"
can you upload to some other site than megaupload and rapidshare?
varma_in_ap said:
can you upload to some other site than megaupload and rapidshare?
Click to expand...
Click to collapse
Where is the rapidshare link?
AX3L, I would like to add some programs to the rom befor installing it, can you give us a guide, and tool as needed?
thanks
...i suggest to intall in to your device and then analize!
I have collected the .cab of my preferites program, unpacked, compress the exe using UPX, edited the registry of each program, make the shortcuts from \Extended_ROM to StartMenu, packed all shortcuts and registry to a proper .cab and edited the config.txt to install it!
Finally a I merged all file into an .nb using a tool named "HTC ExtRom Editor" (u can find around the forum), and using NBHGen i have conerted it to .nbh.....ready to flash!
Forward Message
AX3L said:
...i suggest to intall in to your device and then analize!
I have collected the .cab of my preferites program, unpacked, compress the exe using UPX, edited the registry of each program, make the shortcuts from \Extended_ROM to StartMenu, packed all shortcuts and registry to a proper .cab and edited the config.txt to install it!
Finally a I merged all file into an .nb using a tool named "HTC ExtRom Editor" (u can find around the forum), and using NBHGen i have conerted it to .nbh.....ready to flash!
Forward Message
Click to expand...
Click to collapse
I was just wondering, how did you create the shortcuts into a cab file? I cannot seem to find your shortcuts.cab only shortcuts.cabtxt? I take it your shortcuts / registry settings are in shourtcuts.cabtxt? How did you create this file?
Also I cannot find your HSDPA /enable line in your config ?
Can ~WinCE Cab Manager create the shortcut/regedit cabs?
Nice Ext rom AX3L!
Could you possibly add the Resco Explorer Registry Add-in to the next one?
Then it would be perfect!
(update: 24/06/2007)
http://sithtech.net/ROMs/ExtROM_Plus 2.0.5.rar[/QUOTE]
am i blind or is there a download on this link?
please confirm my sanity
HI ax3l,
firstly thanks for your input and time, running sweeeetly.
maybe there are different chips for gps though as my m700 only has 'external gps' button??
also ref to your external rom
http://sithtech.net/ROMs/ExtROM_Plus 2.0.5.rar
have tried to use this link but cannot, please put me out of my misery and check it for me.
regards
martin
I think this the time for making the latest released roms to be clean of carrier files, so we get more of free memory and also everyone can build his own one with this rom..
so how about taking these roms and extract => dump files => delete carrier files => delete carrier registries => repack the rom files ==> we get a carrierless rom!!
so anyone with me??!
Hi,
I flashed the dopod release and directly after it has booted the first time, while this popup comes up telling one that after 3 sec it is going to install the carrier specific software, customize bla bla and so on, I did a soft reset. This way you stop it from installing. After that you can mount the extended rom, have a look at the cabs in there and manually install what you like.
This works fine and this way you get your carrierfree WM6.
pronor
thanks for reply!
what about AT&T rom? it has some carrier files in OS.nb.
also dopod rom has some CABs that are includes in OS.nb so after every hardreset you cant make choice of installing them or not because thay are in the OS.nb files.
and to delete them you have to reCock the rom and delete them!!!
My idea is to make a rom that has no little file of carrier or also a tiny registery!! not to flash it as it is!!
Those carrier files are in the extrom, not in the os.nb, aren't they?
I'll change to my other pc, dump the rom and have a look for carrier files.
Edit: Found 67 exe files in the dopod rom, but I think there are no carrier files in it.
Edit #2: Found 2 dopod files in it, dopod_black.tsk (Theme) and P_Sound_Dopod_WWE_0713.cab (Soundfiles)
NightmarE said:
thanks for reply!
what about AT&T rom? it has some carrier files in OS.nb.
also dopod rom has some CABs that are includes in OS.nb so after every hardreset you cant make choice of installing them or not because thay are in the OS.nb files.
and to delete them you have to reCock the rom and delete them!!!
My idea is to make a rom that has no little file of carrier or also a tiny registery!! not to flash it as it is!!
Click to expand...
Click to collapse
Take a look at Pandora's ROM Kitchen (recent thread). It does exactly what you want: take a clean (AT&A) ROM as base and then **** the extra you want yourself...
If you don't want the whole kitchen just take the OS.nb from it (or extract the OS from the official ROM).
Normally operator specific stuff goes in the extrom (that's the real bloat). The primary customisation that starts first is OEM specific (normally) and happens from preconfig.txt in the windows directory. For instance on the official ROM it runs a program to increase the in-call volume, which is very desirable as it means you can hear people when you are in a busy situation.
well, i done littel research about the different files in both Dopod and AT&T roms and made a file list.
you can find some register files in at&t rom *.rgu anyway i think there is also some files are same in name but different in version or build. for example the dialer in dopod support video call while the one in at&t does not support video call but it support PTT.
so here is the file list i hope it help you for knowing the carrier files.
pronor said:
Hi,
I flashed the dopod release and directly after it has booted the first time, while this popup comes up telling one that after 3 sec it is going to install the carrier specific software, customize bla bla and so on, I did a soft reset. This way you stop it from installing. After that you can mount the extended rom, have a look at the cabs in there and manually install what you like.
This works fine and this way you get your carrierfree WM6.
pronor
Click to expand...
Click to collapse
did you look at the extended ROM and the cabs it install's before you pressed the reset button there are a few usefull cabs and settings applied to the device... IE there is a new WLAN driver applied...
walshieau said:
did you look at the extended ROM and the cabs it install's before you pressed the reset button there are a few usefull cabs and settings applied to the device... IE there is a new WLAN driver applied...
Click to expand...
Click to collapse
Hmm, as I wrote I installed some CABS manually afterwards directly out of the ext Rom and everything was working fine for me - but maybe in my noob way of doing so - I forgot something very important though everything worked excelllent as long I was testing it.
Nevertheless, I cooked my own rom now with the pandora kitchen - and this seems to work fine as well
I've been reading an gathering information for weeks now to build my own personal ROM. Since I'm unable (at the moment) to build one from scratch
Somehow it doesn't seem to work for me and I could not find an answer to my problems. I really hope some ROM Guru is willingly to help me out here.
I've used the Diamond Kitchen to extract the NBH files. And like it should it creates the OEM and SYS folders when you don't use protected ROM's like Dutty's, Swtos or Bepe's.
I've tried multiple ROM's to rebuild for my personal needs. And here are the most common problems I've encountered:
- Diamond (or Raphael) Volume Control does work. Even when it's included correct in the ROM. Reinstalling Volume Control after flasing using a CAB does work strange enough.
- The sound settings panel won't close after changing sounds.
ROM's I've tried to personalize:
- Panosha
- TOR (SubZero)
- SwiftBL
- VIC Lite
- And probably a few other ROM's I managed to extract (using the kitchen).
I've read some threads about the same problems but they seem to be part of a ROM thread instead of a specific "cooking thread". That's why I started it here.
Do you experience the same problems or do you have some good ideas than please let the rest of us know
I have the same problem
Everything seems OK, except the damned sound configuration.
If someone has an answer, we would appreciate it very much.
Thanks in advance...
Thanks for you reaction. Concerning the Volume Control, there is a way to get this to work. Just add a CAB that you call using the config.txt.
It's not ideal but it should work.
Unfortunately this procedure can't be repeated for the sound setting panel
I played with it a lot and even if I do nothing with the ROM, this sound config problem occurs. I extract the ROM and then rebuild it without modifying anything. This looks like a kitchen problem I thought.
I use Surface Kitchen v1.01. You another one, so this is a little confusing
Edit:
Maybe we can do the same without using those settings but direct in the registry?
Someone knows those keys?
Been using Kitchen 1.0.1 for a couple of days now as well. Updated the programs that were out of date. Did not help.
I also get always this error, could it be the cause?
iXiR said:
I also get always this error, could it be the cause?
Click to expand...
Click to collapse
HI iXiR
I also get the same error every time. I can not even cook the packages made with package creator. Some times I succeed but at the end it saye User.hv / custom.hv not found. Any idea?
thanks
tararura said:
HI iXiR
I also get the same error every time. I can not even cook the packages made with package creator. Some times I succeed but at the end it saye User.hv / custom.hv not found. Any idea?
thanks
Click to expand...
Click to collapse
Well, most of the times this fault is there, its a mistake with your new or edited rgu file like \\ or forgotten empty last row.
regards
Anja31
I recommend you guys try cooking the 1.93 official ROM .., i cooked a personal one for me .. no problems at all
iXiR said:
I also get always this error, could it be the cause?
Click to expand...
Click to collapse
this error is because you also have xip directory already listed in ur kitchen, so when the operation reaches that part of extracting the xip it dumps the xip and .dsm a.rgus, so basically a duplicate I dont use this kitchen but you can always press y to overite all
- The sound settings panel won't close after changing sounds.
Click to expand...
Click to collapse
Try adding this one to your registery:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\LSOMACORE]
"Dll"="LsOmaCore.dll"
"Prefix"="DRM"
"Index"=dword:00000001
reset and you will be able to change the ringtone/press ok on your sound settings
To make it work while cooking, just place this in a RGU file so it will be implemented in the ROM
Thanks will try that one as soon as I can.
Had one crazy thought. Since there are some replies from some real cookers here I was wondering about the next thing.
At the moment I always select option "1" in my kitchen. So I don't rebuild it (option "2"). It shouldn't but is it possible to have more success when using option "2"?
I tried all variants....
select 1 (yes) -> Access denied
select 2 (no) -> the message will appear for a lot of files... even when you always select 2 the ringtone panel won´t work
select 3 (all) -> access denied
So IMO it has no impact, which option you take...
I choose "1". I just want to cook the ROM.
Ah.. now I understand what you mean... the question at the beginning...
of course you have to select "1"...
I talked about the overwriting question (screenshots in post before)
First of all: thanks for this thread...I was going crazy with this issue..!
Has anyone tryied the reg.key posted before?
PS: @maccune...did you tryied to recook swiftbl?! How?! Is it not a protected rom??
Might be wrong about SwiftBL. Tried so many that I could be mixing them up
Tried so many because I hoped there would be one that would work just fine.
If it was up to me I'd use TOR v5 since it's basic and still a Diamond build.
Also the cooker told he didn't mind if people would use his ROM as a base ROM for your kitchen
duttythroy said:
this error is because you also have xip directory already listed in ur kitchen, so when the operation reaches that part of extracting the xip it dumps the xip and .dsm a.rgus, so basically a duplicate I dont use this kitchen but you can always press y to overite all
Click to expand...
Click to collapse
Hi dutty, what do you use to cook and protect your rom ? a made home version ?
Sorry, wrong thread...
Caspertje19 said:
Try adding this one to your registery:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\LSOMACORE]
"Dll"="LsOmaCore.dll"
"Prefix"="DRM"
"Index"=dword:00000001
reset and you will be able to change the ringtone/press ok on your sound settings
To make it work while cooking, just place this in a RGU file so it will be implemented in the ROM
Click to expand...
Click to collapse
Wohoooooooo!
It works... really great... perfect...
I also was going crazy to this issue....
now its solved.....
thx a lot.....
BUT: Another question: How can I add this as RGU File to ROM?