Pda hang whenever in phone setup... - P3300, MDA Compact III General

i have a dopod P800W with the 1.25 ROM. the problem that i faced is that whenever i want to setup the phone (ring tone etc...) the pda will freeze....
reset, hard reset, reflash the rom cannot resolve this... anyone face this issue before or have any remedy???
this is so frustrated as i cannot change the phone setting...

Related

UK Orange SPV-M5000 Troubles after loading Dopod ROM

I have a UK M5000 and updated the ROM to the new Orange ROM without problem. It was still slow so I plunged for the upgarde to the Dopod ROM. Since I did this it crashes all the time. Sometimes I can reset it sometimes I have to take the battery off. After a bit it won't even boot at all!
Despite all this I am always able to get to bootloader and reflash it. I have since tried the QTEK ROM and even back to the Orange ROM but now it still is unstable. Is there any known reason for this that I can try.
PS tried task format commands and mtty stuff as most of the time after a crash it sticks at the splash screen in all ROMs.
PPS IT NEVER did any of this before even after the first Orange ROM upgrade.
ANy help much appreciated.
Thanks
James
Not sure if you've cured this by now but I am a UK Orange user with SPV M5000 and went ahead with Dopod upgrade wihout any problems.
Presume you tried Hard Resetting, formatting card etc?
I have the same problem... It starts 2 days ago... Its terrible!
I have T-mobile. Now i flashing with original T-mobile ROM and i hope that everything will be ok.
If anybody knows whats happend???
I thought that the problem is on hardware...
30 minutes ago i flashed with latest I-mate ROM and when after flashing i do hard reset nothing happend. I see black screen and thats all!!!
Yes! With T-mobile ROM it seems to be ok. Now i try to flash with I-mate ROM again.
May be the problem is in the "MaUpgradeUt_noID.exe"?...
MaUpgradeUt_noID.exe
I find out that there are some issues with this file. Is this the same file we used to use during upgrade/change language??? If yes, than why when I tried to dawnload from the buzz web side i find that there said that the file is 365kb but when you dawnload the file is 165 and that is why some people are having problems when upgrade their rom or change operators/languages.
So if I want to change language it sais that you shoul run MaUpgradeUt_noID.exe and than I see in the picture of Magician. Is this NORMAL and should I go forward or WHAT.
Flashing with T-mobile original ROM didn't resolve the problem...
It's still bad...
What the hell is going on with my Universal???

an issue with JASJAM

Hi,
I have a new JASJAM and have a problem with it. I have configured the device to switch off if not used for 2 minutes. If I switch it off manually it is fine, but if I leave it on then most of the cases it freezes at the end of the 2 minutes and no way to use the device apart from doing a soft reset!
I did already a hard reset, I also had already re-installed the contents of the ROM using the latest ROM on the clubimate site! but no improvement!!!
Any advice shall be appreciated.

Somebody hellllpppp...all sms gone after soft reset

Hi there,
just installed the new wm6 from dopod....the only issue is after soft reset all sms will flush out..all gone...i am sure there was cure for it but i could not fine it...tqqqq.
not sure what you meant. the flashing of new rom wipes out the contents in memory. so after the wm6 reboot after flashing, your dopod is in factory mint condition.
......after each soft reset all existing text message gone.....i have try and installed all versions of the cooked roms(like jjblack,custel,faria,lvsw,etc) but never experienced this "wiped out all sms after each soft reset" scenario....please advice...
ba by hermes...love u TFlo
it is ok now....

My P3300 redials the last call...

Hi All,
I have a major problem with my P3300. Sometimes, it starts to redial the last called number for no reason. I've tried hard and soft resets... still no use.
I've tried to flash the ROM... but no use. Now I've a PDAMobiz ROM, and i m not able to restore the original ROM. Everytime i try to flash the Original ROM i get an error msg stating that the ROM isn't for this version!!!
The phone starts to call the last dialled number for some strange reason...
I've tried to use different power adapters, i've even tried charging the phone only through the USB connection, but still no use :-(
Sometimes, the phone automatically switches to Loud speaker mode as well.
Any help is highly appreciated...
And also can anyone suggest how to restore the original ROM back, I dont have the installer.

WM 6.5 crashing constantly

Hi guys
I recently upgraded my TP2 to WM 6.5 downloaded from HTC themselves. after about a month the device keeps crashing with this device.exe error message on the screen then i cannot hear calls received should i put the phone into vibra mode or silent mode. the person can hear me though. i have to restart to fix this.
is there a patch to fix this somewhere ?
Try a hard reset and see if the problem is solved. Make sure you have backup everything you want to keep Otherwise I suggest you try a cooked rom. In my opinion they are superior to the stock ones.

Categories

Resources