LED Notification not working - 8525, TyTN, MDA Vario II, JasJam ROM Development

Hi all, i have the WM6 rom but i get an sms i dont get the LED changing from green to orange anymore
Is there anyway of enabling this?
I also dont get the orange LED for miss called either

duh
this has already been answered in this forum many times, but you have to set the orange led, it is not enabled by default
it is available in
start>settings>sounds and notiications
then go to the type of notification you want to have it on for, like missed calls or sms, then check the box that says flash light for: then set the amounnt of time you want it to stay orange

computerlove87 said:
this has already been answered in this forum many times, but you have to set the orange led, it is not enabled by default
it is available in
start>settings>sounds and notiications
then go to the type of notification you want to have it on for, like missed calls or sms, then check the box that says flash light for: then set the amounnt of time you want it to stay orange
Click to expand...
Click to collapse
I'm having the same problem and it has nothing to do with the Sounds and Notifications. I've set them but when a notification is received, such as a text message, the amber LED does not blink. The LED stays green. This also occurs on charging also. The LED stays green.

Well, I think we need a little more information. Which ROM do you have? I realize that the first post indicated "the WM6 rom" but that could be anything from XDA Live V1 to Black Shadow and everything in between. Does the problem occur after a clean install before you add programs? What steps have you already tried to correct the problem?

LED Not Blinking Amber...
JasenR said:
Well, I think we need a little more information. Which ROM do you have? I realize that the first post indicated "the WM6 rom" but that could be anything from XDA Live V1 to Black Shadow and everything in between. Does the problem occur after a clean install before you add programs? What steps have you already tried to correct the problem?
Click to expand...
Click to collapse
The current ROM being used is ELF2.1 WM6. The problem is apparent when
1) charging (no amber LED before 100% charge)
2) text/email/voice message notification through 'Sounds/Notifications' (no amber when notification set)
Thanks for the reply.

What 3rd party programs do you have installed?

I had the base rom installed without any additional programs and had the problem. This basically was the case after the install of ELF 2.1.

Related

dont forget software

Hi
I am using the software dont forget to change the led blinking on my s620. http://magazin.softimage.cz/dontforget/app-description/
it works so far. the led blinks when i received an email. thats what i wanted.
but when i now read the mail, that the led does not stop blinking. i have to run the admin panel once more to reset it.
same on reminders. i miss them and the led blinks. i dismiss them and the led does not turn off. it remains blinking.
i am using htc s620 with wm6 original rom.
anyone knows the problem?
It used to work perfectly on my WM6 HTC WWE ROM, but now on Rogers the same problem. Sometimes it stops blinking when I open the last calls list and when I go trough all the messages, but I know that's not it.
Fortunately, Radim is working on a new version and seems it will be available soon.
If you want to help
Please simulate the behaviour we are talking about (e.g. LED keeps blinking even when all emails are read) and then do an export of following registry branches (incl. all sub-branches) from your device:
HKEY_CURRENT_USER\System\State\
and also
HKEY_CURRENT_USER\Software\SoftImage\DontForget
and send it to me to.
Regards
Radim, author of the DontForget app.
Here you go my frined.
If there's anything I can do more for your app that is vital for my likeness of Dash, please contact me via PM and I will give you my e-mail
Yes.
- please describe what was wrong in the time you did the registry export (hoping you did the export when the app was in such state, you should do the export when e.g. the device is blinking and you already read/saw all missed events )
- And tell me the version of the DontForget you are using (in the About dialog).
Ok, I really dedicated myself on recreating the problem, and found that there is no problem. Actually, there is - because on this ROM LED starts and stops blinking as it should, but starting has a 10 seconds delay, and stopping even longer delay. But in the end, the LED seems stopped eventually; except if I'm wrong, but I will then report back (it seemed to me LED continued to blink for the rest of the day, but I cannot seem to recreate the problem any more...).
Ps. version is 2.01 in the About
i can reproduce it easily. I receive an email and read it and it does not stop blinking anymore.
i attached my regs in this state:
turned on phone today morning everything was fine. no blinking. i received an email. blinking. read it. blinking remains.
Same problem for me, as soon as i receive an email, the blinking starts and it doesn't blinking stop.
snudel said:
i can reproduce it easily. I receive an email and read it and it does not stop blinking anymore.
i attached my regs in this state:
turned on phone today morning everything was fine. no blinking. i received an email. blinking. read it. blinking remains.
Click to expand...
Click to collapse
Please try these:
- choose "Test ..." in the Admin and tell me if the LED stopped blinking once the test is finished or not
- are you sure you did the export when the app was in the state we are talking about? You should do the export when e.g. the device is blinking and you already read/saw all missed events i.e. in the state DF behaves wrong.
first the version 2.01
second the notfication window. that doesnt pop up at all after i received an email.
third the test. it does not stop the led blinking after an email is received. just the apply and exit button fixes it.
yes, i exported the settings after i received an email and led was still blinking
Ok, just tell me.
If the device is still blinking (even there is no missed events), how it blinks? Still the same (fast) frequency as during the notification or a bit slower as usualy the device is blinking (e.g. when the option "Slow down LED blinking frequency" is off) ?
it seems, that it is the usual blinking. and not the faster notification blinking.
Ok, but you have "Slow down LED blinking frequency" option set to 0(off), right? So it looks DF is not running (or crashed probably).
Please try to enable the option "Show state icon" in the Admin and watch whether the green exclamation-like icon is still shown (on the top near to radio-signal icon, but not on homescreen). This icon should be green. Watch, when the e-mail arrives, if the icon is still there and if it is there once you have read it etc.
Give me a feedback then.
will it change color from green to red or something? i am kind of color blind...
snudel said:
will it change color from green to red or something? i am kind of color blind...
Click to expand...
Click to collapse
The tray-icon (exclamation mark in a square) should normaly be green (red when the notification is disabled).
But most important is whether the icon is still there or not - regardless of the color.
yes, it remains there
i've got a problem with the Dont Forget software also... it keeps getting shutoff somehow?
I start it, the icon shows up... I exit out of the start menu, and lock my phone... not long later, i see my led flashing, i hit start, and the dontforget icon isn't at the top anymore, so i restart it, and it keeps happening... all this happens when i don't receive any calls or messages also.
I'm using the Rogers WM6 rom, not sure which version of dontforget... I'm testing to see how long it takes to shut off now..
I just reenabled it at 9:54a,
it's now 10:27a, and it's flashing... no messages or anything, just sitting idle DONTFORGET shut off
New version is out
DontForget 2.50 (Beta 1) is out
It took a bit longer than originally expected, but finally I finished new version announced early this year.
I'm sorry for delays and possible inconveniences, but now you can take a pleasure with the new DontForget 2.50.
Detailed information and download you can find at HERE !
Please check this version and tell me if the problems still persists.
Enjoy
Hujer
Hi there,
is there anyway to have the software only notify me of new emails from my Outlook/Exchange mail?
I have POP accounts but they tend to have spam etc which i dont read.
So at the moment dontforget is notifying me of new email all the time, until i mark all my profiles as read.
thanks.

Green blinking LED

On the Stock ATT Tilt 2 ROM, I don't see a green blinking light on the top left that indicates that the radio is on (like on the energy ROM), Is this normal and is there a way to enable it?
GermanGuy said:
On the Stock ATT Tilt 2 ROM, I don't see a green blinking light on the top left that indicates that the radio is on (like on the energy ROM), Is this normal and is there a way to enable it?
Click to expand...
Click to collapse
1) Yes.
2) Don't know.
It's not a ROM thing, it's a TP2 thing -- no flashing green light (for radio). I've tried roms from 6 different cooks and none of them produce a flashing green light when cell-signal-on. There is a flashing green light as an alert/notification, however (e.g., new message, voice mail, etc.).
I don't know if there's a way to enable flashing-when-cell-signal.
MCbrian said:
There is a flashing green light as an alert/notification, however (e.g., new message, voice mail, etc.).
Click to expand...
Click to collapse
Can that be enabled on the stock AT&T ROM? I see the option for it in the notifications screen (e.g. "flash light for xx minutes") for various events like missed calls, new VM, etc., but it's grayed out. I can't turn it on. I've never seen the lights do anything except for charge status when plugged in.
dscline said:
Can that be enabled on the stock AT&T ROM? I see the option for it in the notifications screen (e.g. "flash light for xx minutes") for various events like missed calls, new VM, etc., but it's grayed out. I can't turn it on. I've never seen the lights do anything except for charge status when plugged in.
Click to expand...
Click to collapse
Is the "flash light for" selection grayed out for all Events on the ATT ROM?
Some custom ROMs -- and the new stock Euro WM6.5 ROM -- have the selection grayed out for some of the events...seems to be a bug, 'cause there's no good reason for it to be that way.
MCbrian said:
Is the "flash light for" selection grayed out for all Events on the ATT ROM?
Click to expand...
Click to collapse
Yes, I just quickly scanned through all of them.
Hmmm, I guess I'll have to revise that... this post said it does blink for new messages, so I just sent myself a txt, and indeed, my left light is blinking. But the option is grayed out, so I don't know how long it will blink. Guess I'll leave it unread for a bit.
EDIT: well, that didn't last long. I guess it defaults to "blink light for 5 minutes". No wonder I never noticed it before. If I'm far enough away from the phone that I don't notice a new message, there's a decent chance I won't be close enough to it again to notice a blinking light within 5 minutes. Kind of useless.
So the feature works, it's just that for some reason we can't edit the time value, because it's grayed out. Surely it's just a registry setting?
Have a look HERE. Some of the info may help.

Get Rid of Blinking Green Light???

Yes i used the universal cab found everywhere for this that is suppose to give u options in sounds and notifications. I installed, soft reset, went to sounds and notifications, drop down menu, nothing for this flashing green light. Yes under new text message and stuff like that theres a box u can check to flash the light and how often but that does nothing! I have all the boxes unchecked, i get a new sms, and still the green light blinks until i read the sms, wtf? Anyway to get rid of this light completely?
I heard that once you change the registry for it to blink...it will blink regardless if you have it checked or not.
sirsaechao said:
I heard that once you change the registry for it to blink...it will blink regardless if you have it checked or not.
Click to expand...
Click to collapse
So where is the registry edit to turn it off?
I have a problem similar. I dont want to get the blinking light on new email but cant seem to get rid of it. I did find a post where it told the registry edit to turn it off and it only worked for the first send/rec then after that the blinking light came back
Just my theory as I have been looking for this for months is that we are missing an alert setting. WE are missing the "unread message alert" that has been missing for a while. It is not that it doesnt shut off, it is the unread message overrides it and keeps it blinking. Have yet to find a fix for it

[Q] Notification LED blinking time ?

What is making the notification LED blinking stop after few minutes (about 8 minutes in my case) on DesireHD ? something in its kernel ? hardware ? system ?
Is there a way to change that ?
pretty sure it can be changed with an app... i've never seen such thing (i never searched too), but the app "led me know" let you change the frequency it blinks and what color, as many other configs, like if softkeys are enabled with notifications, or if it should blink even with screen on, etc, etc...
How the hell the Market search can be so bad !...
Very nice found app, thiagodark ! 'Led me know' is exactly what i was missing for notification led !
Btw it really stupid to have to use a root app to be able to customise led notifications, it should be builtin the system...
i believe phones should be rooted by default, or at least by a checkbox with a little disclaimer "marking this checkbox, your phone will be rooted, and it will be able to write in system partitions, this could be dangerous and if you don't know what it means, don't mark it" Done and painless! =oP
this way we'd see so many apps made for rooted phones with much more possibilities.
that's a dream, i know! =o)
regards!
the default LED behaviour of the DHD is to blink for 5 mins , and the DHD only supports 2 colors (amber and green).
after searching for weeks for a solution to that , i highly recommend u use LEDMEKNOW in the market, its very usefull and solves all the led notification problems (its developer will update it soon a he indicated in his thread for some bug fixes)

Change LED flash color per operation

I did a search and didn't find anything(although I used the mobile app to search, read:aggravating)on this subject. I want to know if there is a mod to change the led flash to blue for messages and missed calls instead of red. Just a personal aggravation, really. Not something I absolutely can't live without, clearly.
Sent from my SPH-D710 using xda premium
The only thing I know of is to use GO SMS. You can change the LED to blue for SMS messages through GO SMS but I don't think it will change the color for missed calls.
LightFlow has been working very well for me on default mode on EL29 and FC22. Only blue and red work, but they work reliably. You can get purple to work if you use "direct mode", but I find that the LED turns off when the phone goes to sleep mode, so it's not very useful as a notification light.
re
I as well have been looking for a WAY or MOD or APP that will successfully allow me to change the LED notification accordingly but yet have been able to find anything that FULLY works. Liteflow doesnt FULLY work as the adjustments are off and when screen times out its pointless pretty much.
The ONLY thing Iv been able to find for another "notification method" is having the LED Flash from the Camera flash for an alert. Pretty cool thought if you have your phone faced down and dont here it.... Send me a message as for request if anyone wants the know how to set that up and I'll give you step by step..
try blink from the marketplace. its like lightflow, but its much lighter and more efficient and works great.
keep in mind the led will only display blue red or purple tho.
blink is one of my must have apps
stljim2005 said:
I as well have been looking for a WAY or MOD or APP that will successfully allow me to change the LED notification accordingly but yet have been able to find anything that FULLY works. Liteflow doesnt FULLY work as the adjustments are off and when screen times out its pointless pretty much.
The ONLY thing Iv been able to find for another "notification method" is having the LED Flash from the Camera flash for an alert. Pretty cool thought if you have your phone faced down and dont here it.... Send me a message as for request if anyone wants the know how to set that up and I'll give you step by step..
Click to expand...
Click to collapse
Hey man, might i ask how do i set it up for my camera flash to be my alert for notifications? that would be awesome

Categories

Resources