wm6 to wm5 - no MyFaves? help - HTC Excalibur

I installed successfully and tried WM6, it's great but still beta. So I downgraded back to the WM5 for Dash that's posted on this forum, and I can't get myfaves to come back again.
on wm6 I had no issues with myfaves, they were there and correct but wm5 downgrade, they aren't available, the myfaves option is gone.
please help

why?
out of curiosity, why did you go back to wm5? I have been looking at the upgrade and have been trying to get opinions.

I was having no reception or very poor reception and just suspected it's because the T-mobile network isnt fully equipped for wm6. So i went back. Other than the reception issue, which may not be an issue, wm6 is awesome. But my problem still is with wm5, no Myfaves options and still no reception.

h00l1gan said:
I was having no reception or very poor reception and just suspected it's because the T-mobile network isnt fully equipped for wm6. So i went back. Other than the reception issue, which may not be an issue, wm6 is awesome. But my problem still is with wm5, no Myfaves options and still no reception.
Click to expand...
Click to collapse
the reception most likely had to do with a radio rom that came packed with wm6.
you should be able to get the reception back on wm5 or wm6 if you install the proper radio rom.

How do I go about getting a proper radio rom? ..and what is a radio rom exactly>?>

h00l1gan said:
How do I go about getting a proper radio rom? ..and what is a radio rom exactly>?>
Click to expand...
Click to collapse
a radio rom is a rom that updates just the radio version
check the ftp right here
ftp://xda:[email protected]/smartphones/Excalibur/

i hope you're not worried about getting charged extra, your myfavs program doesnt work, but you still have the myfaves concerning your bill, so dont worry that much

went back to WM6 beta, my faves works on that, I have the top 5 on my homescreen. Reception is working fine so far. I really dont have any plans to go back to WM5 - WM6 is much more prettier.

Related

Use telephone and data connection at the same time?

Back when I had the base Cingular WM5 rom on my phone I was able to talk on the phone and have my data connection going at the same time. Since upgrading to WM6, XDA Live .20 and Black 2.0 I have not been able to get that feature back. To make a call it has to disconnect me. Then once I get off the phone call the data connection connects again. I tried the Allways On option in HTweakC that came with the WM6 releases but that doesn't appear to be what I am looking for. Does anyone else notice this or have a fix?
My device maintains a data connection whilst I am on voice calls. I receive emails fine whilst talking. Its on Black 2.0
KanosWRX said:
Does anyone else notice this or have a fix?
Click to expand...
Click to collapse
yes.. try your phone and data in a 3G area... voice and data only works in 3G not edge......
I have tried it in a 3G area, right by my work I have 4 bars of 3G. But everytime I try to call or get a call it always closes the data connection.
try using bandswitch and manually fixing the phone to 3G only.. just to make sure its really on 3G and not secretly on Edge..
When I select the WCDMA Network I get the 3G Icon, when I select the GSM Network I get the E Icon. So I think it knows the difference between 3G and E just fine. I leave the "band" setting set to Auto.
BTW I am using radio rom 1.38.00.10 now, but even when I had the factory 1.16.00.00 I still had this problem with WM6. It only seemed to work with WM5. Another strange thing, in the phone app it says UMTS Cingular, just another sign it is actually using UMTS (3G).
Its just so annoying if I am online doing anything, slingbox, browsing the web, then when I want to make a call, it usually fails the first time while it disconnects then it goes through
Another odd thing probably just part of the new radio rom, when online and it starts to load data it switches to an H icon, I guess for HPDSA or whatever that abbreviation is.
Are you sure its really closing the data connection? Ignore the icons. Send yourself some emails and see if they arrive whilst on voicecall.
KanosWRX said:
When I select the WCDMA Network I get the 3G Icon, when I select the GSM Network I get the E Icon. So I think it knows the difference between 3G and E just fine. I leave the "band" setting set to Auto.
BTW I am using radio rom 1.38.00.10 now, but even when I had the factory 1.16.00.00 I still had this problem with WM6. It only seemed to work with WM5. Another strange thing, in the phone app it says UMTS Cingular, just another sign it is actually using UMTS (3G).
Click to expand...
Click to collapse
i was saying to do this as a test, just to make sure the phone wasnt doing something funny... just some basic troubleshooting to help find the problem...
kinda like if your car wont start.. there are different problems that could cause it, maybe its out of gas, maybe the fuel filter is clogged, maybe the battery is dead.. different things can cause similiar problems, its better to eliminate all possibilities
I tested it this morning, data and voice works fine at the same time. Called voicemail and then opened up IE and was able to load several pages while on the call.
Edit, where are you located? Is it possible there is a problem with the network there? Try downgrading back to the Cingular software and see if that works.
Shogunmark, I figured thats what you were getting at, and I tried all the options I could that would give me a connection to the network, but I still couldn't do data and telephone at the same time. Everytime I was connected online then went to place a data call it would have to disconnect me first. I tried doing a phone call then connecting online, but nothing would load.
I guess I could try going back to WM5, but I have hard spl 1.4 on so I gotta do a little rom editing of the cingular rom to get WM5 back I guess. didn't realize it was that complicated to go back to factory after installing hard spl.
Im surprised no one else has this issue. Its been like this for me pretty much as long as I have had WM6, so I doubt its the cingular network.
KanosWRX said:
Shogunmark, I figured thats what you were getting at, and I tried all the options I could that would give me a connection to the network, but I still couldn't do data and telephone at the same time. Everytime I was connected online then went to place a data call it would have to disconnect me first. I tried doing a phone call then connecting online, but nothing would load.
I guess I could try going back to WM5, but I have hard spl 1.4 on so I gotta do a little rom editing of the cingular rom to get WM5 back I guess. didn't realize it was that complicated to go back to factory after installing hard spl.
Im surprised no one else has this issue. Its been like this for me pretty much as long as I have had WM6, so I doubt its the cingular network.
Click to expand...
Click to collapse
not at all, just drop a WM5 NBH into a folder with CustomRUU and use autodetect. it'll flash quite happily
How would I take the HTC Cingular rom (found here, http://www.america.htc.com/support/8525/software-downloads.html) and get the WM5 NBH? Or will I have to use another WM5 version?
Just chiming in to say I don't have this problem and I've used both those roms and still using WMXL 0.20 now and use data and calling all the time. I am using the same radio ROM as you now too and it still works ok.
What apps do you have installed? anything that would end the data connection for some reason? Maybe put a list of apps and customisations you've made since installing the WM6 rom you have?
You could also try it with a blank WM6 rom, manually add the data connection settings and try and see if that works? Just to eliminate 3rd party apps and thing's you've changed.
The only other similar thing i can think of is I do remember there was an issue where data would disconnect when changing between 3G and EDGE. I don't remember who had this problem or why but it could be related.
Let us know how it goes?
Maz
--------------
This would be great to add to the bug tracker website when I finish it.
http://maz.net.au/
KanosWRX said:
How would I take the HTC Cingular rom (found here, http://www.america.htc.com/support/8525/software-downloads.html) and get the WM5 NBH? Or will I have to use another WM5 version?
Click to expand...
Click to collapse
Use this guide to go back to the Cingular ROM.
http://www.mrvanx.myzen.co.uk/hermes_guide/Downgrade/index.html
Here are the apps I have
Resco File Explorer
Core Media Player
Slingbox
Don't run to many apps on my ppc as you can see. I mainly just use it to stream media from home (orb, slingbox), and internet connection sharing. I'll probably find some time tonight to revert back to WM5 and let you know what I find.
Well I just flashed back to the cingular rom, and guess what it's working again, can talk on the phone and be on the internet at the same time. So weird. well I guess I will try going back to Black 2.0 and see what happens.
Kanos,
Your problem is definitely not WM6. As in WM5, I can concurrently browse the internet during a voice call. As Mark said, there may be other issues specific to your case -- you'll have to methodically eliminate one-by-one... you'll have to decide if the process is really worth the time yourself.
FWIW:
Radio 1.34
HERMES 200 HT625 (in use since 7/4/2006)
Network: Manual (Taiwan UMTS)
Band: Auto/GSM(900+1800)+UMTS(2100)
Cheers
I believe it's not truly a problem with WM6, as people obviously have gotten it to work. I will definitely look into it more and keep you all updated on what I find. Right now I am still on WM5 but I will flash back to WM6, no apps installed, right after a fresh hard reset and see if it works or not for me.
I decided to try LVSW this time. Guess what it worked, I was able to both data and phone at the same time. Next test will be to install Black 2.0 again and see what happens.
My theory is this, I had XDALive .10 and maybe that version had this issue, then when I upgraded to .20 it carried over somehow and then carried over to black 2.0. Then once I went back to WM5 it reset everything. Don't ask me how, but obviously I have a lot more flashing to do to test this theory.
the imate site on wm5 proclaim this as a problem. when u r receiving data at a specific point in time u cannot receive a call.
the aust. telstra latest release says the upgrade fixes this.
to bypass going back to wm5 i just used the xda radio only upgrade to try and bypass. this was i believe only when receiving data and a call inwards simultaneously.
otherwise i have never had ur problem n likely a flash issue.
there is another i have noticed in recent releases is activesync now asks to allow data to be received when activesync this is a 4.5 change so perhaps looking for this setting may also help ur simultaneous data issue. just a guess but it might have been easy to not allow this when u upgraded to wmg which rwquired 4.5 to do this.
anyway goodluck with it.

Radio problems with LVSW/Radio ROM

I am using LVSW ROMs since 26/03 version, through 08/04 until present 19/05. I also have 1.41 version of Radio ROM. Since I've started using these ROMs, I'm noticing problems with radio stack.
For example, while I was driving a car across Europe (UK->PL) few weeks ago, GSM module hanged almost every time I was crossing a border between countries and phone was loosing signal from one country and had to register in another. All I could see was little [!] sign instead of signal bars, and restarting phone module and/or whole device could help it. Two days ago I was on M1 from Sheffield to London and I've noticed that GSM module just died - pressing green button did just nothing (despite I had full signal bars), and people trying to call me that time, were saying they had regular calling signal, like I was missing a call. Besides that whole device was working properly, with no problems whatsoever.
On the other hand, I have no problems with dropped calls or data sessions. Looks like it is happening mainly on the move, and phone has problems with registering with network properly.
So there is a question(s) - does anyone have similar problems with LVSW ROMs or 1.41 Radio ROM? Should I downgrade Radio ROM to 1.40 or 1.38? I have HardSPLv7 installed, so is it safe to just use this RUU - ftp://xda:[email protected]/Uploads/Hermes/HERM_Radio_Only_1.40.30.00_CustomRUU.rar ? I've been searching forums, but haven't found much information on *downgrading* Radio ROM in particular.
Thanks in advance for any suggestions.
Its the radio rom causing you problems. I've also had problems with data connections in particular using ROM 1.40 and 1.41 (in Asia, on UMTS and EDGE networks).
Suggest you re-flash the pretty-much proven 1.38 ROM. You can find the download link from the Wiki.
radio downgrade
I used the 1.40 on black 2.5 and it was ok , then I upgraded to 1.41 radio and I had problems with the sound quality so I downgraded to 1.40 and the sound become back good
I have HardSPLv7 installed and I am on orange IL Israel
I used for downgrade CustomRUU and had no problems on the downgrade prosses
now i am using the last version of LVWS with radio 1.40 and it is working ok
hope this info help you
another remark :
try to install first the radion and on top of it os and not first os and then radio , i notice in a change of battery life in those 2 variants
Were you driving too fast for the phone to keep up with the radio transmitters passing by????
I'm also using LVSW 19-05 and Radio 1.41 but not having any significant issues unless a program runs at 100%, then the person trying to call me hangs up before the phone starts ringing!
Ciao Oggy.
It's not the LVSW ROM.....! It's the radio 1.41 And this radio was tuned for Cingular. I am on Cingular and i personally think that 1.40 is much much better. Read up on the two radio topics for more info on the two. So the bottom line is it's NOT LVSW at fault here. it's the 1.41 radio...
DAFTEK said:
It's not the LVSW ROM.....! It's the radio 1.41 And this radio was tuned for Cingular. I am on Cingular and i personally think that 1.40 is much much better. Read up on the two radio topics for more info on the two. So the bottom line is it's NOT LVSW at fault here. it's the 1.41 radio...
Click to expand...
Click to collapse
Yeah, that's what I thought, but wasn't 100% sure either. I'm going to downgrade to 1.40 tonight and will observe any results...
Thanks to all for your inputs.
to be fair I think there is a problem with t-mobile uk at the moment with handovers, let me explain.......
I have a active data connection.........
phone is on 3G, everything fine
phone switches to 2G, data connection is still active, no problems
phone switches to 3G, data connection is broken and the radio reboots (scrolling dots ect.)
I can (and have) replicated this with EVERY radio from 1.27 to 1.41 (and I do mean EVERY radio)
I've also tried EVERY WM6 rom out there all do the same.
so I can only think its T-mobile playing up, its just strange that everything worked fine with WM5 as I remember (and no Im not flashing back to find out!)
Hi, I'm in the Netherlands. Just tested the 1.40 because 1.41 disconnected all the time. So far so good (5 calls later..). Downgrade went fine with the customRUU. Regards Bas
ratcom said:
to be fair I think there is a problem with t-mobile uk at the moment with handovers, let me explain.......
I have a active data connection.........
phone is on 3G, everything fine
phone switches to 2G, data connection is still active, no problems
phone switches to 3G, data connection is broken and the radio reboots (scrolling dots ect.)
Click to expand...
Click to collapse
Interesting - it might be worth to check, but here in London it's actually hard to find a place where phone would switch itself 3G->2G. But anyway, I had problems not only on T-Mobile UK network, as I stated in first post, so I rather think it's Radio ROM related problem, more than network.
Sorry...I've been to positive. Right now only incoming calls come through. Outgoing is still a disaster. I'll downgrade to 1.38. Ill let you know if this works..
Currently in Thailand on DTAC, an EDGE network (all their GSM networks here have EDGE).
Radio 1.40: Voice calls were okay, didn't seem to have any problems, until I tried using data (gprs/edge). The data connection was completely unstable and unusable. Downgraded to radio 1.38...
Radio 1.38: Everything okay so far, EDGE data and voice calls.
Same boat!
Yup, same thing here with T-Mobile and the 3G/2G thingy.
Though I must admit 1.40 is pretty sucky anyway, 1.41 was worse.
Considering going back to 1.38, I've forgotten what it came with 1.2x or something, which, for its sins was pretty OK.
Oi! T-Mobile!! Sort it out before I head back to Orange!!!!
Actually, forget that rant, no point taking two steps backwards and starting to pay per MB again!!! LMAO
mccreath said:
Yup, same thing here with T-Mobile and the 3G/2G thingy.
Though I must admit 1.40 is pretty sucky anyway, 1.41 was worse.
Considering going back to 1.38, I've forgotten what it came with 1.2x or something, which, for its sins was pretty OK.
Click to expand...
Click to collapse
One more thing, which just came to my mind - in the original T-Mobile's MDA Vario II Extended ROM there is a file called P_rilgsm_patch.CAB, which could be related to Radio. Maybe this is a key for these problems? I guess this patch is network-specific - well, I believe this patch is there for a reason...
Btw, I've just downgraded to 1.40...
Error message flashing Radio 1.40.30
Hope someone can help me with this. I'm encountering an error message when trying to flash to radio 1.40.30. I have Custel 2.5 installed on a JasJam with Radio 1.41 currently.
When I run the update RUU program and click the AutoDetect button, I get a message that says "Error, Unknown version! You should pick SSPL".
I have HardSPL7 installed, so my question is, is it safe to force SSPL? Is that what it is asking me to do?
Thanks.
Nevermind, I think I found the answer finally - it only took many days:
1. Select "2.10 new..."
2. Tick "Is it HARD Spl?"
And then run the update as per normal.
where is the link to downgrade the radio 1.38
thanks
naxos said:
where is the link to downgrade the radio 1.38
thanks
Click to expand...
Click to collapse
You will find all the Radio roms available at this link:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
thanks man
tried P_rilgsm_patch.CAB which as made abit of a mess Could some post rilgsm.dll from a LVSW rom plz as I managed to backup the wrong file
ratcom said:
tried P_rilgsm_patch.CAB which as made abit of a mess Could some post rilgsm.dll from a LVSW rom plz as I managed to backup the wrong file
Click to expand...
Click to collapse
OK, but how to actually copy/send rilgsm.dll file?? Each time I have 'File cannot be copied' message, or such like... :-o
Btw, what happened, when you applied rilgsm patch?
i now get a "E" icon instead of "3G" and the radio seems slower handing over from 3G to 2G and back (thank god my stairs are 2G only!) I've sent you a PM on how to copy that file.

Looking for T-Mobile radio 1.10 or 1.12

I'm having problems with connections using Web'n'Walk and want to try changing the radio in my XDA Exec to a T-Mobile issue in the hope that it will improve performance.
Despite much searching I can only find these radios as part of self-extracting ROM updates which won't work on my Exec due to country error.
Can any anyone point me to these radio ROM images or suggest a radio version that works really well with Web'n'Walk.
Cheers
I am using radio 1.15 with no problems with T-Mobile WnW...I am also in the same sort of area..
here is the Radio v1.10 for you:
http://www.megaupload.com/de/?d=3NIAM5HD
Many thanks. I'll give them both a try.
found here:
http://218.93.115.138/d900
There is something odd about UK T-Mobile and Radios other than 1.10. I have upgraded to various WM6 ROMs and, indeed, the latest WM5 ones. Initially, they work well but, after about 24 hrs, the phone keeps losing a signal, GPRS stops working and send/receive hangs. Soft resets work initially, then even that doesn't fix it. My only solution is to revert to the standard T-Mobile Universal WM5 ROM. The common element is Radio 1.50.
I have read posts saying that others have had no problems with 1.50 but, for me, in the Oxford area, only 1.10 works.
Thanks for sourcing it, I can now try wm6 with Radio 1.10.
Have found and uploaded to my folder 15 different radios.
Hopfully it makes it easyer for others to find things they want...

Radio Rom roundup (determening best radio for each country/provider)

The goal of this thread is to find out which radio is best for your region and provider.
We will have to look at the following
-Reception strenght for both gsm and 3g.
-Speed of GPS lock
-Batterylife
I have added a poll, the poll will be continent based, but you can post your exact country and provider in your commentry post.
if we can get enough information or see a red line that makes things easyer we could add a wiki page with recomended radios for each country or provider
yeayyy second...
from qatar .. no probs with radio 150xxxx
signals ..atleat get a bar where 1.46 didnt get any
gps.. maybe bit faster lock..
improved.. now dont need to charger 2 days ( depends on usage)
In New Zealand (on Vodafone NZ), and strangely with the Dopod ANZ WM6 ROM and 1.46.30.11 radio incoming calls don't work, I can dial out just fine and all other radio functions (BT, WIFI, GPS) work perfectly. Just nobody can call me - they get a disconnected signal which is very strange! Tried fixing the phone to only GSM or only 3G, neither of which helped.
I would have thought that since the Dopod ANZ ROM was released for the ANZ region the 1.46.30.11 radio that came with it would work nere.
Went back to the 1.38 radio ROM which fixed the problem. Haven't yet tried 1.41 or 1.50 to see if they fix the problem.
In North America using 1.46.00. It works as well as 1.38 did, however GPS fix is twice as fast now.
Rogers Canada
-------------------
1.50.08.111
1.46.xxxx
Sometimes calls are dropped after 1 ring and sent straight to voicemail. Sometimes phone doesn't even ring and goes straight to voicemail. GPS reception is great. Haven't noticed any difference in call quality with either of these radios.
1.38.00.11
Seems to be most stable for me. Doesn't not have the same issues as the newer radios, however GPS reception isn't as good.
T-Mobile USA.These ones work fine.
1.35.00.11
1.38.00.11
1.41.00.11
1.46.00.11
1.46.30.11
This version:1.50.08.11
Sends my calls straight to voicemail and sometimes the phone only rings once.
Up till now it would seem that 1.50.08.111 is the best version to choose by default, and only if you have problem then you should downgrade to 1.46.xxxx
ACCORDING TO MY OPINION:
each official os require different drivers and/or dll to access to radio rom and one of the most important is rilgsm.dll and related exes.
More or less, we actually have 3 kinds of cooked rom, derived from official anz, sea and new anz with different radio roms. Each one should use the radio rom shipped with its own os, but as to seem that all the people here go always to the latest revision number without thinking to the drivers they are using.
The latest radio 1.50 has been shipped by a local provider probably with special setting, but the people seem to go to this version just becouse it's the latest revision. Why don't you trust what your rom cookers are suggesting about radio roms?
For example, it seem that the most part of the people are using axel roms on its devices, and axel includes Radio v1.46.00.11 to its own rom. But according to this poll, most part of the people are using 1.50 radio.
Please think about this...
Ciao
Antzzz said:
In New Zealand (on Vodafone NZ), and strangely with the Dopod ANZ WM6 ROM and 1.46.30.11 radio incoming calls don't work, I can dial out just fine and all other radio functions (BT, WIFI, GPS) work perfectly. Just nobody can call me - they get a disconnected signal which is very strange! Tried fixing the phone to only GSM or only 3G, neither of which helped.
I would have thought that since the Dopod ANZ ROM was released for the ANZ region the 1.46.30.11 radio that came with it would work nere.
Went back to the 1.38 radio ROM which fixed the problem. Haven't yet tried 1.41 or 1.50 to see if they fix the problem.
Click to expand...
Click to collapse
Yeah, I have the same problem with my P3600. I have upgraded to radio rom 1.46 and people can not call me anymore. I am downgrading to 1.38 now. I have put wm5 back but the radio rom didn't change. it is still 1.46.
and?
And South America? it doesnt exist?
There can only be 10 options, so south america and everything else not mentioned goes under the other option
Tried 1.38.00.11 .. that comes with mun rom...
it was working perfectly ...
then unfortunately i upgraded to 1.46.30.11 ...
which sucks big time ... voice is bad ... reception is bad .. and gps is the same ...
didn't try other roms ...
on my way to reinstall 1.38
I for one never noticed any difference they all perform the same way, its only a version number that changes in my device
What about Portugal?
Im still using the olg 1.46 one...
taiseer999 said:
I for one never noticed any difference they all perform the same way, its only a version number that changes in my device
Click to expand...
Click to collapse
If thats the case why are you still using Radio-Rom: 1.46.30.11 ? could you explain?
vdias said:
What about Portugal?
Im still using the olg 1.46 one...
Click to expand...
Click to collapse
Last time i checked portugal was part of europe
tetsuo55 said:
If thats the case why are you still using Radio-Rom: 1.46.30.11 ? could you explain?
Click to expand...
Click to collapse
Yeah simply becuase I am tired of moving between different versions just trying to improve the GPS first fix as people claim the fix is faster with every new radio rom, and I got sick of it and that was the last version I used....
I would have had the same question coming to me with any number I had put in my signature....ha
thanks for that answer
Can we pin this and other Polls?
I am using "Test.build.gps.32.75.7020" Its was made for specific network provider. With standard radio rom my phone was missing calls and sms messages.
Hello guys!
I flashed 1.5xxx radio to my Trini, and my IMEI has changed!!!Do you have any idea, how to change it back? My IMEI is checked every time, I leave the factory, I can not leave it like this

[The ALL-RADIO Excalibur Thread]

hey i was looking at the other forums and they all contain some kind of radio rom thread with many radio roms and its sticky'd so i decided i should make one also so everyone can find radio roms easily and flash them and see which they get the best performance out of!
some radios extracted with thanks to: da_mayhem
T-Mobile WM6 Radio - 4.1.13.34_02.79.90
HTC WM6 WWE ROM - 4.1.13.44_02.94.90
Rogers WM6 Radio - 4,1,13,47_02.98.90
New 4.1.13.51_03.07.90 radio
and finally some VOX radio's I converted over to the Excalibur/Dash
Vox Radio 4.1.13.47_02.98.90
Vox Radio 4.1.13.37_02.83.90
Vox Radio 4.1.13.47_02.94.90
Vox Radio 4.1.13.60_03.18.90
Make sure you have the USPL loaded into your device (Thanks to jockyw2001)
**How to Flash**
1. download the USPL file
2. Run USPL.bat and follow the instructions
3. once your screen turns blank and the USPL.bat application finishes open up the radio rom file you would like to flash and run the RomUpdateUtility.exe file
4. Report your results so others can see!!
***Flash at your own risk and ask questions or read if your uncertain as to what to do***
well ill be the first one to post my results. out of all the radios i believe the 02.98.90 radio gives me the best service in my area
battery life not bad either
im in Woodland Hills CA and using tmobile service
i can say out of the 3 official ones ive used only the rogers one had a decent reception in my area....
I am intrigued with the vox ones... ill have to load one of them up this week and test it.
I was wondering... is any of these radios known to drop calls?
I'll explain myself. I usually call someone and some people will hang up and call back. The fact is that these kind of calls won't usually come through, as they receive the message from the network operator that the terminal is powered off or out of coverage (rough translation).
If they call back once again, this time the call comes in.
Any ideas on what's causing this behaviour?
A similar problem happens when I'm on the data connection chatting with palringo or browsing the web. If someone calls me in these moments the call won't come through.
Bump!
Any ideas on this issue?
Which Radio ROM would you suggest I downgrade to given that now I have 4.1.13.51_03.07.90?
Just wondering, what these radio roms did, and do they affect you having wm6.1/6/5?
Were can I go to see what radio version I have installed on my dash?
stickman said:
Bump!
Any ideas on this issue?
Which Radio ROM would you suggest I downgrade to given that now I have 4.1.13.51_03.07.90?
Click to expand...
Click to collapse
yeah im wondering that to since i get alot of dropped calls now
Well, I think I've narrowed the problem to a provider issue.
I'm on a unlimited data plan and have palringo and exchange server setup so I'm always online.
So, I get the above mentioned behaviour, but it just doesn't happen with the dash. My Nokia E65 does the very same thing, call won't come through sometimes if I'm idling on palringo or pulling mails, so it has to be either that Vodafone has old gsm equipment in my area or that it's misconfigured.
Over 3G the problem goes away, it happens on gsm but not just to the dash so I think I'm done blaming the htc.
i changed it to the new radio and i get perfect reception everywhere now and my last phone call sounded extra clear
BUMP FOR THIS THREAD. it deserves a sticky. I gotta test every radio out of this and see which one works flawlessly with WM6.5
EDIT: The HTC radio has been removed. I wanna use with my non T-Mo network
I have ookba's newest ROM to date on my phone, with the newest radio on there. Only problem is... it DRAINS my battery like no other. If its on standby, it goes down really fast, and I'm at 80% within an hour of zero use. Which radio version here would be good and work well with WM6.5? Which one has good service?
HTC_Phone said:
I have ookba's newest ROM to date on my phone, with the newest radio on there. Only problem is... it DRAINS my battery like no other. If its on standby, it goes down really fast, and I'm at 80% within an hour of zero use. Which radio version here would be good and work well with WM6.5? Which one has good service?
Click to expand...
Click to collapse
You should be careful with this particular rom, ookba stated not so long ago that testing other radios has been not stable with his 6.5 rom.
gmaniac2008 said:
You should be careful with this particular rom, ookba stated not so long ago that testing other radios has been not stable with his 6.5 rom.
Click to expand...
Click to collapse
Hmmm... Alright. Thank You for that. I'll wait and see if anyone else tests it for the 3VO rom.

Categories

Resources