Related
Can anyone help us please, reading the tread of Helmi's first post of AKU 3.5 a few of us is experiencing problem with the internet sharing function.
We get a massage saing that it cannot connect for a unknown reason?!
Please help!!
Big thanks!!
Ivan's AKU 3.5 ROM has the same problem.
if U experiencing prob. with sharing inet from pc(pc connected to inet - passthrough connection) try change usb connection type to serial (in helmi's 3.5 rom use prog :/programs/extra/usb mode switch) & change to serial not rndis, it works for me
issues with t-mobile? please form a queue
Not the solution...
phsnake said:
if U experiencing prob. with sharing inet from pc(pc connected to inet - passthrough connection) try change usb connection type to serial (in helmi's 3.5 rom use prog :/programs/extra/usb mode switch) & change to serial not rndis, it works for me
Click to expand...
Click to collapse
I was talking about the internet sharing in the programs directory.
It fails to connect to GPRS...
Perhaps someone can post a internet sharing cab.
Universal Broadcomm Stack (Test)
This is an earlier stage of porting Broadcomm Stack to universal device so something might not work, or not work very good...hopes that I didn't forgot something... and dont expect everything to be perfect... its still on test stage...
Tested Operation (On My AKU3.5/Crossbow):
- Headset/Handsfree (Tested With Nokia BH700)
- A2DP (Tested With My PC)
- File Transfer (Tested With Nokia phones, Desktop PC, PocketPC, HP Ipaq)
- Networking / LAN Access with my pc
- Bluetooth ActiveSync
- Bluetooth Serial Port
- Business Card Exchange (Object Push)
- Connect to internet via other Mobile Phone (BT DUN With Nokia 6165i CDMA Phone)
Untested operation:
- Bluetooth SAP Profile (Broadcom Version)
- Bluetooth PAN Profile
The instalation is quite complicated a bit, I've already talk with vijay about this,
hopes that he'll come out with app that will switch between the two stack only with soft-reset (app that will read *.ini input is enough, or read *.reg is more cool), cos My v1.1 crossbow is hv this stack built in (Dual bluetooth stack capability), u just need to activate it, so user might switch between the two stack easily with softreset only.
Instalation:
1. Install SIGN_UNIBR176.0500.CAB
2. Restart.
Uninstall:
1. Install ActivateMSBT.CAB FIRST.
2. Restart
3. Uninstal/remove Broadcomm Stack.
I need everyone to be involved with this one... any input is more then welcome... lets work together guys and make this stack better...
Get the file here:
ftp://xda:[email protected]/Universal/Cooked_ROMs/helmi_c/UNIBR176.0500.zip
Unsigned
ftp://xda:[email protected]/Universal/Cooked_ROMs/helmi_c/UNSIGN_UNI1.7.6.0500.zip
UnRoute.exe are taken from superdave. Some parts of the stack is taken from Fujitsu Siemens T830, some from ASUS P525.
I still need couple of files, Anyone have T830 rom dump??
I've some work with apache device, from its configuration, it should work also with apache... I dont know, I dont hv the device..
regard,
Helmi
Lol SWEET
Read your pm just a second ago
Looks like i'm the first to dive in.
It's friday here so I'll prolly install it right away and test it over the weekend.
dips on the work dude
I tried to install it several times, but everytime I get the message 'Installation of SIGN_UNIBR176.0500.CAB was unsuccesful.'
I'd love to give it a try...
I am unable to install the SIGN_uNI cab file, I tried installing to device and storage. I'm using Helmi 3.5 rom 1.3.1.
Looks like I'm not the only one
I'm using the WM6 crossbow rom
I've tried:
Close app
disable BT
install (no success)
soft reset
flight modus on (no success)
hmm... I'll post the unsigned one...
EDIT:
check this setup.
ftp://xda:[email protected]/Universal/Cooked_ROMs/helmi_c/UNSIGN_UNI1.7.6.0500.zip
helmi_c said:
hmm... I'll post the unsigned one...
Click to expand...
Click to collapse
Thank you manyfold
OK, able to install the unsigned one...Thnks
Unsigned version installs fine on my Aku 3.3 Apache. BT starts and the blue light blinks. Unfortunately, my stereo headset is in my car so I can't test it. I'm really confident it will work fine.
Bushrod said:
Unsigned version installs fine on my Aku 3.3 Apache. BT starts and the blue light blinks. Unfortunately, my stereo headset is in my car so I can't test it. I'm really confident it will work fine.
Click to expand...
Click to collapse
If it also work on my AKU3.3 for Apache then maybe I'll built in ROM in my next Apache Custom rom, thats will be cool, with ability to switch between stack, but I just can't find time to create the switching app...
Working with Sony-Ericsson HBH-DS970 (stereo) Fine! Thanks!
Thanks helmi_c, I find it super!!!
It works Perfect with i.Tech Clip R35!
Thanks Helmi
Working perfectly with VC 1.6 as well.
I know I speak for everyone with an Apache when I say that we are eagerly awaiting your next custom rom!
working with cario scala 500. Good range too, a lot better than ms stack.
Hmmm... I get an "BT Radio failed to turn on due to Insufficient driver memory available..." error on a Vanilla AKU3.5 rom (helmi's own vanilla rom). I've got nothing else installed, it's clean...
Strange, does anyone know what to do?
TIA!
hi
please can somebody post the link where can i get the ActivateMSBT.CAB
thanks so lot
regards
nusy
2marianna: download files from first post
Do we install your Bluetooth stack AS WELL AS uninstall the current MS Stack? Or is it OK to leave the MS one installed? Thanks
helmi_c
I have a ppc 6700 running your AKU 3.3. Installed the unsigned BT stack, reset. Program icons all loaded. Tried to start BT, Blue LED flashed once then I got the BTTrayCE error message "BT Radio failed to turn on due to Insufficient driver memory available..." I reset again, same thing happens again...
Ive installed wm6 black and 3des.1 cooked roms of wm6 and I definitely want to keep wm6 for now, however I am totally unable to connect my Hermes to my laptop for use as a modem . I have tried the internet sharing option which seems to do nothing (on the old wireless modem app it would request drivers, when switched on this one just says 'limited or no connectivity' and doesnt request any drivers at all).
My favoured method however was to use bluetooth DUN, but when attempting to pair the devices with wm6 i simply get told 'Services requiring registration were not found by bluetooth settings. The specified device provides the following services: FTP, OPP and BIP'.......basically no DUN option there at all.
I have tried activating internet sharing via bluetooth before pairing and this made no difference.
Please help someone - I really like wm6 but I need to use my phone as a modem when I'm out and about. I had no problems with wm5.
My OS is XP Pro SP2 and the current ROM on my device is 3DES.1.
I've checked these forums for help with no luck, so any advice would be greatly appreciated
leoni1980 said:
Ive installed wm6 black and 3des.1 cooked roms of wm6 and I definitely want to keep wm6 for now, however I am totally unable to connect my Hermes to my laptop for use as a modem . I have tried the internet sharing option which seems to do nothing (on the old wireless modem app it would request drivers, when switched on this one just says 'limited or no connectivity' and doesnt request any drivers at all).
My favoured method however was to use bluetooth DUN, but when attempting to pair the devices with wm6 i simply get told 'Services requiring registration were not found by bluetooth settings. The specified device provides the following services: FTP, OPP and BIP'.......basically no DUN option there at all.
I have tried activating internet sharing via bluetooth before pairing and this made no difference.
Please help someone - I really like wm6 but I need to use my phone as a modem when I'm out and about. I had no problems with wm5.
My OS is XP Pro SP2 and the current ROM on my device is 3DES.1.
I've checked these forums for help with no luck, so any advice would be greatly appreciated
Click to expand...
Click to collapse
This has to do with the fact that ics doesn't work with the toshiba bluetooth stack.... If you change to the microsoft stack on yout XP laptop you will be able to use ICS.
Cheers,
HJ
only problem is, that not all PC bluetooth device have this choice, I mean change stack to microsoft.... before you buy any BT stick, look at manufarcuter web, if it is possible to use MS stack. I dont want to make propaganda for MSI products, but there is few BT, which have this choice. actually I using THIS one, and here is possible to install MS stack. here is manual, how to install this device with MS BT stack.
PS: this question has been answered XXX times, so try to search before ask
my bluetooth is integrated into my laptop, hence the convenience. why have microsoft taken a seemingly downward step in windows mobile 6 and made it even LESS compatible than before?!? seems a bit stupid to me.
Also this doesn't answer the question of why I am unable to connect my device via USB. I need this function for work. is there any way of installing the old wireless modem app as a simple solution?
thanks everyone for your help so far
i have same problem with my laptop , the BT device is built in and not supported by microsoft stack.
Also the usb is a problem , i installed activesync 4.5 but when i start internet sharing it tell there is no or limited network activity so doesn't work with usb too
Does someone know if widcomm stack can work too ?
i can confirm the microsoft stack work fine on pcs where the BT device is supported ....
Can someone help ???
THX
vdavide said:
i have same problem with my laptop , the BT device is built in and not supported by microsoft stack.
Also the usb is a problem , i installed activesync 4.5 but when i start internet sharing it tell there is no or limited network activity so doesn't work with usb too
Does someone know if widcomm stack can work too ?
i can confirm the microsoft stack work fine on pcs where the BT device is supported ....
Can someone help ???
THX
Click to expand...
Click to collapse
Care to tell us what laptop are you using and what bluetooth stack involved because some hardware could be forced to be supported by the MS driver.
sorted
VDAVIDE, you may be pleased to hear this.
just TURN OFF BLUETOOTH in comms manager, go to internet sharing and select USB/T-mobile (or whatever your connection is called) then hit connect. It then just connects as a local area connection - no need for drivers - nothing - it's absolutely brilliant and means I can just plug and browse on any laptop. Screw the bluetooth connection, I'm sticking with USB - more reliable, more convenient and it charges my phone too.
---deleted---
leoni1980 said:
VDAVIDE, you may be pleased to hear this.
just TURN OFF BLUETOOTH in comms manager, go to internet sharing and select USB/T-mobile (or whatever your connection is called) then hit connect. It then just connects as a local area connection - no need for drivers - nothing - it's absolutely brilliant and means I can just plug and browse on any laptop. Screw the bluetooth connection, I'm sticking with USB - more reliable, more convenient and it charges my phone too.
Click to expand...
Click to collapse
THX for reply , but as i wrote also the usb is not working ... i tried as u wrote but the pc say " no or limited network activity , error is : can't get IP address from the device " .
@ Ciphol :
i'm running XP home with SP2 , my laptop is ASUS A6 series model Z92J with internal BT 183 2.0 + edr module ( manifactured by toshiba ) that seem to be an usb module .
The only BT stack supported by the BT183 is the ( obviously) toshiba stack .
I reistalled the BT183 toshiba drivers manually ( not the stack software ) but the module is ignored by MS stack....
I searched for drivers on the net but no lucky.
Any help is appreciated , thx again
vdavide said:
THX for reply , but as i wrote also the usb is not working ... i tried as u wrote but the pc say " no or limited network activity , error is : can't get IP address from the device " .
@ Ciphol :
i'm running XP home with SP2 , my laptop is ASUS A6 series model Z92J with internal BT 183 2.0 + edr module ( manifactured by toshiba ) that seem to be an usb module .
The only BT stack supported by the BT183 is the ( obviously) toshiba stack .
I reistalled the BT183 toshiba drivers manually ( not the stack software ) but the module is ignored by MS stack....
I searched for drivers on the net but no lucky.
Any help is appreciated , thx again
Click to expand...
Click to collapse
Connection through USB supposed to be ok, hmm... but you can try to force the bluetooth hardware to be supported by the MS driver. Could you please do this and give me the details.
The step:
1. Start > Control Panel > System > Hardware > Device Manager
2. Find the unknown USB driver ( The one with the ? beside it)and right clicking on it > Properties > Details > Click the dropdown option and select 'Hardware Ids'
3. You will see something like 'USB\Vid_044E&Pid_300c&Rev_1915' and maybe 'USB\Vid_044E&Pid_300c'.
4. Write down the Ids. and post it here.
@SORTED
Sorry about my last post , turning OFF the BT on the tytn allow internet sharing to work with USB ( but drivers for usb networking must be installed before , i.e. install activesync 4.5 that as the drivers ...).
in my last test the BT was ON and usb not working ...
THX
@CYPHOL ....
here is : USB\VID_0B05&PID_1712\0194E8-5B-0002
If need i can post the inf file for this device from toshiba bt stack
THX
vdavide said:
@SORTED
Sorry about my last post , turning OFF the BT on the tytn allow internet sharing to work with USB ( but drivers for usb networking must be installed before , i.e. install activesync 4.5 that as the drivers ...).
in my last test the BT was ON and usb not working ...
THX
@CYPHOL ....
here is : USB\VID_0B05&PID_1712\0194E8-5B-0002
If need i can post the inf file for this device from toshiba bt stack
THX
Click to expand...
Click to collapse
I hope you've given me the complete Ids.If so then try this one. Backup the original bth.inf inside \windows\inf\ folder and replace with the one from this archive. Now try to install again by pointing to the new bth.inf. But please uninstall any previous installation first. If not success then tell me since I'm trying to use the widcomm stack.
thx CYPHOL , i will try tomorrow
i'm added the original inf file for this device ...
vdavide said:
@SORTED
Sorry about my last post , turning OFF the BT on the tytn allow internet sharing to work with USB ( but drivers for usb networking must be installed before , i.e. install activesync 4.5 that as the drivers ...).
in my last test the BT was ON and usb not working ...
THX
@CYPHOL ....
here is : USB\VID_0B05&PID_1712\0194E8-5B-0002
If need i can post the inf file for this device from toshiba bt stack
THX
Click to expand...
Click to collapse
I tried the Internet Sharing facility on my XP tower upstairs (which has never had Activsync on it) and it works just the same - no need for drivers - it's as if I'm just plugging an ethernet cable in.
Be interested to know if the same will be true of old laptops with SP1, as is mine at work.
I am trying to connect using USB and nothing happened. No activity or anything on the laptop and I can't connect to the Internet.
I am runnign Sony VAIO and I have ActiveSync 4.5. I have an MDA Compact III (with built-in GPS) running WM5 and it also have the "Internet Sharing" application. I connected this device with Internet Sharing running and all works well.
What am I missing frommy 8525/TyTn with WM6?
lanwarrior said:
I am trying to connect using USB and nothing happened. No activity or anything on the laptop and I can't connect to the Internet.
I am runnign Sony VAIO and I have ActiveSync 4.5. I have an MDA Compact III (with built-in GPS) running WM5 and it also have the "Internet Sharing" application. I connected this device with Internet Sharing running and all works well.
What am I missing frommy 8525/TyTn with WM6?
Click to expand...
Click to collapse
WM6 is using PANU whereas WM5 is using NAP as to connect through Bluetooth but if you use USB it should connect as is only that you have to switch the bluetooth off before making the connection.
FYI, I'm using Vaio VGN-TX37GP and can connect through both the USB and Bluetooth conns. after modifying the infos on the MS inf driver file.
@CYPHOL
Dear Cyphol, thx , i can now use my laptot with BT internet sharing using your modified bth.inf . MS stack is now running
Only one thing , the line you edited has an error but fixed and working
thx again !
vdavide said:
@CYPHOL
Dear Cyphol, thx , i can now use my laptot with BT internet sharing using your modified bth.inf . MS stack is now running
Only one thing , the line you edited has an error but fixed and working
thx again !
Click to expand...
Click to collapse
Nice to hear that but sorry for my careless mistakes done in doing the scripting.
I got ths same issue.
Im having the same problem with my laptop. Im using a sony ux90 umpc. Do you think this same fix would work for me, or how do I tell. Is there a link to this problem, I've been searching for this for hours now. Thanks for the help.
briols6 said:
Im having the same problem with my laptop. Im using a sony ux90 umpc. Do you think this same fix would work for me, or how do I tell. Is there a link to this problem, I've been searching for this for hours now. Thanks for the help.
Click to expand...
Click to collapse
Check this post:
http://forum.xda-developers.com/showthread.php?t=298691#10
Can anyone verify if WM6 on the Trinity brings back the Bluetooth DUN profile?
I'm 95% happy with the Dopod WM5 ROM on my P3600, the only thing missing is that I can't get traffic updates to my tomtom 910.
Hi, I am using mun's 2SE rom and I can now get traffic updates on my tomtom 910.
I did not have to do anything special on the SE version, it just worked.
WM5 etc would not see anything other than the BTHF profile.
all workign now
BMF
Very VERY good news, off to go download WM6 now
I just downloaded and installed mun's 2SE (flawless install). Wow is my phone better
Anyway, it does enable TomTom 910's traffic updating. I had to "delete" my phone from the TomTom 910 and then reconnect to it.
Simple.
Is there any possibility this Bluetooth patch can be worked into the WM6 releases for the Hermes??
I have exactly the same problem (no DUN profile), but on the Hermes.
DOH!
just upgraded to muns TE version of 6 and tomtom 910 does not see bluetooth DUN
the SE version worked sweet with TT910.
BMF
badmelonfarmer said:
just upgraded to muns TE version of 6 and tomtom 910 does not see bluetooth DUN
the SE version worked sweet with TT910.
BMF
Click to expand...
Click to collapse
I found solution) here it is http://forum.xda-developers.com/showpost.php?p=1281328&postcount=882
My Tom Tom GO 700 reports this error during the configuration.
"This phone does not report Wireless data connection (DUN) cabalities."
I have loaded mentioned CAB's.(SP1 and BT_DUN) Is ther a hope on getting this going?
thanks Peter
After adding new cabs, delete phone from TomTom, delete TomTom relationship from phone. Resync.
done what you hav sudgested, but no good. Still the Error about phone does not report wireless data connection (DUN).
I gues will have to go back to previous release.
psimek said:
done what you hav sudgested, but no good. Still the Error about phone does not report wireless data connection (DUN).
I gues will have to go back to previous release.
Click to expand...
Click to collapse
try to add this reg entries and files... sorry don't have time to make a cab
Thanks MuM,
Phone is recognized, but cannot connect to cingular.
I will try to play with more settings before I go back.
Peter
Where to Install MODEMLINK?
Where should the contents of MODEMLINK be install? Windows dir?
Thanks
mun_rus said:
try to add this reg entries and files... sorry don't have time to make a cab
Click to expand...
Click to collapse
Please kindly advise where I should put those reg entries & files? TKS & RGDS!
dan.gior said:
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Click to expand...
Click to collapse
to connect over usb you need usb rdiver HTC for pc...
here:
to connect over usb you need usb rdiver HTC for pc...
here:
So I'm a bit confused, does that mean we can use a data connection on the Hermes via Bluetooth for the TomTom 910?
I recommend you this thread, that's the way I got tomtom go data connection and plus services working with my wm 6-updated wizard:
http://forum.xda-developers.com/showthread.php?t=314371&page=3#21
dartrax
ervius said:
to connect over usb you need usb rdiver HTC for pc...
here:
Click to expand...
Click to collapse
Thanks worked painlessly on my O2 Orbit (Artemis/3300).
What a great site - I've learnt loads already and lookforward to overclocking next!
Neil
connected my new smartphone shadows with tom tom go 700
After 5 days of struggle, I finally was able to connect my wireless data (DuN) with my tom tom go 700.
What i did is as follows:
extract the attachment and do the following:
1. Unlocked my phone app for tmobile
2. installed WM6_btdun
soft reset
3. copied all files of SPDUNHACK including registary one to the windows folder(\windows)
4. Installed the installed ATCUI, showed me a serial (COM:1) port
softreset
and connected my tom tom...
But as the experts mentioned earlier, while your tom tom is connected, you are not able to surf the net but able to do all other things. It says voice call active.
Good luck!
With my universal (qtek 9000) Rom aku 3.5 ITA Fly I can't use the gprs bluetooth modem.
With this rom (and all the aku 3.x e WM6 rom) my universal supplied only a NAP (Network Access Point) and not a DUN (Dial-Up Networking) but with this NAP service I can't connect my device.
I'have use this Hack http://forum.xda-developers.com/showthread.php?t=319978 but with no effect with my rom.
Is there someone that use a universal like a gprs bluetooth modem with the same or a similar Rom?
Thanks in adance.