Related
help me
I have a Imate Jas-Jar windows mobile 2005. A new version of GPS Nav-N-Go was released for WM 2005 I installed it and it doesn't work! It doesn't recognize my GPS on the Parrot CK3300.
I talked with the Nav-N-Go developers and they told me that the Nav-N-Go works with 9 GPS antenna's. It seems to me that the problem is in the definition of a communication "COM port".
Please help me to solve this problem. Is there a way to define a "COM port" for GPS in the CK3300
jorge
JasJar & TomTom5 using a Parrot 3300 for GPS & Phone
I also have a Jas Jar badged as an Orange SPVM5000 and have similar problems. I am not a techie by any meands but I do not think the problem is with the Parrot 3300.
The Bluetooth pairing connects Parrot and Phone.
Setting the com port is identifying where the incoming gps signal is made of available on the phone.
TomTom5 is the sat nav software I use and it seems only to work by connecting to certain com ports. Unfortunatley, the phone does not like assigning the connection to this port.
Elsewhere on this site there are instructions which allowed me to pair the phone with another GPS BT reciever I use when out and about.
The same procedure will not work with pasiring the parrot.
Does anyone have any suggestions as to how I can pair with the Parrot to get the phone and gps working?
You may find some answers here -- worth a try, anyway.
http://www.parrot.biz/forums/english/
I am interested in this http://www.parrot.biz/united_kingdom/products/index.php?id=ck3300 Does anybody have any experience using this device, how well does it work etc. ?
I plan on using it with O2 Mini S and possibly Tom Tom software what do you guys think?
I have a CK3300 and the similar CK3100 (no GPS) in my wife's car.
They work superbly with Sony Ericsson phones, less well with Motorolas and Nokias but a bit of a disaster with the XDA Mini-S. Doesn't auto connect, doesn't synch contacts properly, overwrites voice tags. There's a bunch of posts on the subject in the Parrot forum on their website. Rumours that there will be a software upgrade shortly which will address some issues.
I haven't got around to trying the GPS with TomTom on the XDA (as I can't get it to install!) but it worked fine with my previous PPC (an iPaq RX3715)
--
Dave
I have a CK3300 not had to meany problems on the GPS side but my xda 2s and my axd mini would not work with the handsfree bit.
My xda exec works fine on GPs and handsfree.
Very good bit of kit overall
Beside experience, I have a question to post here.
I have Parrot СК3300 for 2 years. As handsfree kit, it works perfectly with Sonyericsson K750i, 700i, Z800, P900. With Sonyericsson P900, it works perfectly as hands free kit and GPS module simultaneously.
However, after connecting my QTEK2020i (1.11.00 WWE, Radio 1.02.00, ExtROM 1.11.113 WWE dd 27of Jan 2005) I can use Parrot as GPS module only. Any attempts to use Parrot as kar kit leads only to loud clicks from speakers. So just for now, I use Parrot as hands-free for Sonyericsson K700i and as GPS module with QTEK simultaneously.
No way to fix it. I delete all Bluetooth devices, soft reset, ad only Parrot as hands-free, soft reset. No result.
Can you suggest me how to fix it.
Thanks in advance!
Hi,
I have a CK 3000 intsalled with Tom Tom and a third party BT GPS mouse. The Parrot works very well but it has to be paired as a Hands-free set and not as a headset. One small bug, though: I have to start TT first for the GPS to connect when getting back into the vehicle. After that I start the engine, which connects the CK3000 to my MDA II. If the CK is connected first, TT can't find the mouse.
I've been looking for a way to get the audio to be put through the the CK. I once found a piece of software that could do that on this site but inspite of hours of searching, I haven't been able to find it again. - HELP!
parrot car kit
I have a parrot CK3500 GPS car kit and it works well with TomTom Mobile 5 on my SPV E200 ,C500, C550 and has worked with TomTom Navigator 5 my M2000 as well. This is for Voice AND GPS simultaneously.
with earlier versions of TOMTOM i needed to rename the bluetooth connection from Parrot to TomTom Wireless GPS.
I have an XDA Mini S too which is on a data only tariff (so havent tried handsfree) but TomTom 5 works with it for GPS. They seem a little fiddly to set up, but once set up they are great.
I found i needed to use "AnyGPS Tweak" on all the smartphones to get it to connect initially
I had a CK3300 in another car and that worked exactly the same.
The only criticism is that the GPS voice instructions dont go through the speakers. However sometimes they do, and it seems to be if you start TomTom before you switch on the car ignition, the car kit thinks a call is in progress and relays the GPS through the speakers. It doesnt always work, but sometimes its a bit of a shock to get Jane bellowing through the speaker!!
The downside is that if you take a voice call over the car kit, it seems to re-set and the GPS voice then reverts back to the phone speaker.
I have emailed Parrot about this and have not had a reply as yet.
Re: parrot car kit
shadowman said:
I found i needed to use "AnyGPS Tweak" on all the smartphones to get it to connect initially
I had a CK3300 in another car and that worked exactly the same.
Click to expand...
Click to collapse
Thanks for your reply.
As far as I understand, I can't solve problem with incoming - outcoming telephone calls by some "secret' QTEK settings.
Therefore, I'll try to find "Any Bluetooth Tweak" program to fix it.
Can you suggest any "Tweak" software?
I recently installed the HTC WM6 ROM and was pleased with its speed etc. however the bluetoth has changed in some way and I was unable to use my Mototola handsfree car kit. I then tried the B&B 3.7 and had the same problem.
Is there a workaround i.e. have the wm6 rom with the old bluetooth ?
Thanks in advance for any help!
Some car-kits show as a headset, some as a hands free. The WM6 blutooth only seems to recognise Hands Free. My car kit does both, On Nokia it shows both, on WM6 only Hands Free.
Does anyone have a Headset Stack?
WM6 and car kit!
I have the same problem! If i activate the hansfree e deactivate it works! Is a motorola a like carkit! Can sameone help me? Tks
I have the cheapo aldi BT car cd radio. If I turn the radio on then the BT on my phone the radio mutes. But if I do it the other way round, ie BT on then turn radio on, it worls fine
hth
I have a bluetrek S2 headset, Since I flashed my MDAC III to WM6(B&B) I'm having problems keeping the headset and my device paired. I flashed WM6.1(B&B5.0) to the device but the problem still exist. I can pair them to each oter, and everything works fine. When I turn of the headset( to recharge or to save battery) The connection is lost the next time I turn it back on, I do have to pair them again. First I tough it was my headsets problem, but then I tried to pair a BT GPS mouse, the same result. I have the same problem pairing this GPS with other devices(TyTN, iMate Jamin) running WM6. Does anyone know how to fix this bluetooth problem I'm having?
There might be a connection here (no pun intended). For quite sometime, I was using an old SE637 phone and had it working flawlessly with my Garmin c550 GPS.
During an hour and a half trip yesterday, the Garmin notified me 3 times that the bluetooth connection with the Tilt was lost (the SE profile had already been removed from the Garmin). I never saw this message before with the SE. FWIW, the 2 devices are no more than 2 or 3 feet apart at all times, and neither of them are physically touched during the trip. I'm concerned that this might be an HTC problem. Any thoughts?
smonte said:
I have a bluetrek S2 headset, Since I flashed my MDAC III to WM6(B&B) I'm having problems keeping the headset and my device paired. I flashed WM6.1(B&B5.0) to the device but the problem still exist. I can pair them to each oter, and everything works fine. When I turn of the headset( to recharge or to save battery) The connection is lost the next time I turn it back on, I do have to pair them again. First I tough it was my headsets problem, but then I tried to pair a BT GPS mouse, the same result. I have the same problem pairing this GPS with other devices(TyTN, iMate Jamin) running WM6. Does anyone know how to fix this bluetooth problem I'm having?
Click to expand...
Click to collapse
No one with an possible solution, or at least with the same problem??
Same problem here
I have just received a new HTC TyTN II on Orange that has the same problem. My old one (windows mobile 6.0) had no problem with my Motorola H12, but the new one (Windows Mobile 6.1) can't keep the pairing, and I have to turn Bluetooth on an off to get the connection. Always have to enter the passcode.
Version data is:
CE OS 5.2.19212 (Build 19212.1.0.3)
Processor: MSM7200-400MHz
ROM version 1.65.16.25
G 25.83.40.02H
D 3.28.00.00
Any help /advice much appreciated!
O.
Fixed itself...
This seems now to have fixed itself - I had to enter the password twice in a row for some reason and then it worked properly. So now all happy...
Windows Mobile 6.1 rocks...
Just wondering if you guys can help
My touch Pro 2
Vodafone UK
ROM - 1.14.161.6 (50207)
Radio - 3.44.25.27
Protocol - 61.25t.25.19U
links to the 2009 BMW 5 series iDrive and reads the phone book I can make calls fine but if I pick up an in coming call using the iDrive controller it makes the connection but there is no sound either way.
If I press the phone answer button on an incoming call then it works perfectly.
It does not do this all the time but its more like 90% can't hear and 10% works fine.
I contacted HTC who said that the phone matches the bluetooth profiles and it should be fine BMW have not got back to me yet (4 weeks so far)
this also happens to some one else I work with and his touch pro 2 on his 2005 BMW with the older iDrive and built in BMW Phoneprep.
another guy with an Audi has no issues at all. I also contacted Bury who make the Uni-System 8 car kits about when they were going to do a cradle for the TP2 and I was informed that they were not planning it at present, I asked why and they said "HTC's bluetooth was flakey"
I put the hard SPL on the phone and upped it to the latest HTC build
ROM - 1.19.707.2 (51489)
Radio - 3.44.25.27
Protocol - 61.25t.25.19U
but have put it back to the Warranty status as it did not make any difference
Any help appreciated
I know Parrto is a different BT HFBTP but I had all kinds of flakey problems until I updated to the latest Radio in the TP2 and upgraded to the latest firmware for the Parrot CK3100 Car Unit.
Try an update to your iDrive system.
More car kit problems
I'm really disappointed by the bluetooth in the TP2. Having just upgraded from a Snap which worked perfectly with all my attachments, the TP2 is a disaster with the car kit in my (new) Volvo. (A bit like the BMW story at the head of the thread.) Won't connect to my TomTom sat nav. Almost works with my Parrot (upgraded as recommended above). Not what you expect from a 'top of the range' piece of kit from htc. I hope there will be a patch for the BT stack. In the meantime I have to revert to my Snap for car journeys. Bizarre.
This happened to me:
If I don´t set up a data connection to my carrier, the link to my bluetooth car kit works perfectly, meaning that I can answer calls and hang up using the button on the steering wheel.
Once I set up a data connection, I can only answer and hangup using the buttons on the telephone. In any case I can listen and talk using the car kit.
TP2
The same issue here. My TP2 won't connect properly to my Volvo V70 2009 BT Car kit. It is connecting and synchronizing but then it won't make call's. (sometimes it suddenly does work). My phone is getting really slow. And somethine the connection fall's away during a conversation. Even when i shut down all data connections on my phone it behaves as mentioned here above. HTC and Volvo just point at each other and a solution seems far away. Yes. I did the firmware upgrades on both sides. At this time i would not recommend the HTC TP2 as a business phone. My collegues have similar issues with other car brands.
Volvo V70 2009 - Firmware November 2009
HTC Touch pro 2 - WM 6.5 UK (and a dutch vodafone office account)
Anyone with a solution? Suggestions? thnx.
My TP2 (unbranded) was working fine until I updated it to WM6.5 (an official release). Now, there are no issues when it gets paired with my son's Mitsubishi Lancer but it refuses to work correctly with my Audi A4. It picks a call but stays silent until charger is connected. Disconnecting of charger "fixes" the situation so I start hearing a call.
Bluetooth wasn't working for me either. Pairing went fine, answering worked, but no sound at all... I followed instructions on this page: http://www.everythingwm.com/forum/moto-q-9c/q9c-and-infiniti-g35x-bluetooth-problem-16833-4.html and now everything works as expected. I'm driving a Renault Espace with a built-in stereo/gps/carkit.
i bought a car kit MP3 player for my car. I paired it with my TP2 and enabled the "BT Audio" and "BT Handsfree". Outgoing calls work fine with no problems at all. But during incoming calls there is a problem. If the incoming call is from someone saved in my contacts, the BT carkit does not ring. If its from an unknown number (not saved in my contacts), it works perfectly. I tried all the tweaks and hacks in this forum but nothing worked. Anymore ideas.