Develop Bugs

SD Card not detected

I am using O2 XDA IIs PPC 2003 SE.
Now when I insert my SD Card 2 GB, the OS does not recognize it.
(It was good before.)
I've tried with another 256 SD Card, same result.
Those SD Cards are working well with my Card Reader plugged into my PC.
Anyone could help me please?
Thanks in advance.

I'm sorry I don't know.
However.. you've come to the wrong place if you want help.. people here seem to have an aversion to actually helping people out.. don't get me wrong, there are some very talented people that call this forum 'base', but they are understandably busy.. and the other's who hang just don't answer **** unless it suits them..
You are more likely to get the answer "read the wiki" which isn't the most helpful thing in the world. Even those of us who try others to help despite our knowledge being somewhat wanting.. just in the hopes of being seen to be at least trying, aren't deemed to be worth giving an answer to.
I suggest these two forums.
http://www.ipmart-forum.com/index.php
http://www.totalpda.co.uk/forum/
You will get help there.

Try soft resetting the device, poke the stylus in the reset hole and once the device re-boots it should see the card, you will not loose information performing a soft reset - Mike

thanks guys.

Hi, I've also have a sort of problem like yours. I tried soft reset n it actually works. But sometimes my BA still can't read my SD. I've tried format my SD n even upgrade my ROM. It seems that the problem is in hardware. I don't know what to do anymore

U have probably what I also have.. a faulty SD card reader or a bad soldering (welding)...

Last night I dissambled my BA n I found out that the screws around SD card reader were loose. I've tightened them up n so far I don't have any problem with SD card. But I've still exprerienced problem with my screen keep active when my BA was pressed even though I've locked the device n power off. I don't know what to do anymore. Any suggestion?

Problem already solved.
It was because tiny plastic dirts on the SD slot.
Once I cleaned it up, it's working as before.
Thanks to you all. What a nice forum we have here.

I had similar problems with a 1GB card. Formatting it in a PC-based card reader fixed it. Remember not to select quick format.

Can I put a 4GB SD Card in the Blue Angel? Will it work?

noone85 said:
Can I put a 4GB SD Card in the Blue Angel? Will it work?
Click to expand...
Click to collapse
It will work if the card is *NOT* a SDHC card.
I found my 4 gig card on ebay, topram is the brand, and it works fine as it is a non-SDHC card.

Sdcard not reconized
HI TO ALL..
I had installed miopocket 4.0 on my VDO Dayton PNA6000-WINCE 5 but
because of problems with Garmin XT I had to uninstall but the uninstall
did not do the best for me, now my SD slot dont read any sdcard i think
its corrupted registry and i dont have access to usb active sync only
have MTP (Media Transfer Protocol) when i connect to usb(no data
transfer). How can i access my resident flash(INTERNAL MEMORY) to edit
registry,change usb mode to activesync or something else???, i think sdmemory.dll is making
load problems.
Tnx in advance!

To have access to registry use TotalCommander or SKTools

but i dont have access to system, sdslot is not functional and i cant install active sync driver just mtu in device manager..

4GB Transcend miniSDHC not detected by new Dopod ROM :(

miniSDHC car is not visible in the File Explorer or on the PC wia ActiveSync. it was visible under previous WM 6 ROM which was the early, leaked version. now after installing new Dopod Asian WWE version, the card is no longer detected unfortunately, I don't have a USB card reader for HC cards, so I can't format it right now. any suggestions on the fix? anyone else seen high capacity card not being detected? thx!

dim4x4 said:
miniSDHC car is not visible in the File Explorer or on the PC wia ActiveSync. it was visible under previous WM 6 ROM which was the early, leaked version. now after installing new Dopod Asian WWE version, the card is no longer detected unfortunately, I don't have a USB card reader for HC cards, so I can't format it right now. any suggestions on the fix? anyone else seen high capacity card not being detected? thx!
Click to expand...
Click to collapse
Oh no, this is not good news. I thought that they would have sorted all of the card issues with the new rom...shame on HTC!

I tried the new ROM and I used the 4GB Tanscend MiniSD HC and it was working fine!!!!!!!!! No problems at all!

My 4GB SDHC was working fine with official rom until it bricked.
Now it's impossible to access it in any device.

my problem continues. hard reset and reinstall didn't help. looks like the problem is with the card.
anyone knows any SDHC USB card readers to format this pain in the neck? thx!

dim4x4 said:
my problem continues. hard reset and reinstall didn't help. looks like the problem is with the card.
anyone knows any SDHC USB card readers to format this pain in the neck? thx!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=306697

Strange SD card Problem

I have been using Touch 4.02 with an 8gb card for ages now with no troubles then yesterday the storage card is no longer recognised by the phone? I tried the usual soft reset, taking the card out wiping it put it back in still no joy.
Reinstalled the sdhc cab file didnt work, Have just re-flashed with the new diamond look a like rom and still it aint recognising the card.
Has anyone got any ideas??

mikehulme1983 said:
I have been using Touch 4.02 with an 8gb card for ages now with no troubles then yesterday the storage card is no longer recognised by the phone? I tried the usual soft reset, taking the card out wiping it put it back in still no joy.
Reinstalled the sdhc cab file didnt work, Have just re-flashed with the new diamond look a like rom and still it aint recognising the card.
Has anyone got any ideas??
Click to expand...
Click to collapse
Probably your card is broken....
Try to insert it in a card reader and see if it recognizes the card....

Yeh will have to wait till I get home not sure my memory card supports SDHC though?

I have a similar problem, and like you I've been happily using an 8gb card for a while, but in the last week it has stopped working correctly.
Occasionally it is fine, but most of the time access to the card is either very slow or it doesn't appear at all.
I've tried the following but with no success:
- Using another MicroSD card (2gb)
- Reading the cards in a card reader and they are fine
- Reinstalling Artemis Touch 4.02 WM6.1
- Formatting the card (FAT32)
- Shimming the MicroSD card with bits of cardboard as I've read there can be a loose fit
- Cleaning the contacts on the card reader
- Pulling the contact pins out a bit to get a better fit
Does anyone have any ideas of anything else to try?

Does WM5torage work?

I did the followings to make my 4GB Micro SD usable by my Artemis:
1-flashed it to FAT32 in my laptop (I Had to format my laptop partition D of my HDD to FAT32 to make the microSD recognizable by my NTFS system).
2-copied the "system folder" from my older 512 MGB card as it is (hidden) to the root of my 4GB
3-The 4GB is readable by my artemis by now.
4-To make sure the crad will be working good in the future, I installed the "Flashcard" Cab in my Artemis and reflashed the card to FAT32, 512 Bytes 4KB clusters.
The card is just fine under Artemis windows, but I gatta take it out when flashing any new ROMs or Radio.
Hope that'd help you.

uniqueboy said:
Does WM5torage work?
Click to expand...
Click to collapse
No - WM5torage behaves the same ... i.e. occasionally works (if the phone can see the card), but most of the time it just reports an error

It is deffothe memory card just put my old 2gb back in the phone and it worked, I have tried the 8gb in my PC card reader and in y camcorder that takes sdhc and neither recognised it.
This explains why my phone started goin so slow it would take ages to do anything then the memory card was unrecognised a few days later.
Im guessing there is no way to repair these?

If you can't read it, you can't do anything...
R.I.P.... :|
Cheers

Gutted oh well

not as gutted as i am ... looks like i'll have to buy a new phone!

Just try to format it by these criteria
FAT32, 512 Bytes 4KB clusters
then let us know.

dude dont panic try to recover the card first before you format it. i am sure there are some imp data there eh?
use a disk recovery utility on ur pc
my best choice is Recover My Files http://www.recovermyfiles.com/
if you are using windows os also try to run scan disk
use pocket mechanic then on ur ppc
let us know how well u do

Sorry for posting...Wrong thread...

Hermes microSD

Hi,
i'm using in my HERM200 microSD card Kingston 2GB. I have CRC 13.0 Rom. I have problem with my card, because I 'm using this card on Linux and on Windows Xp.
If i'm in Win i'm using WMstorage or ActiveSync or card reader to copy files.
If i'm in Lin i'm using WMstorage or card reader to copy files. Always I do unplugging card before disconnecting.
But after some time my card is corrupted and i can't access some files. I have tried two different microSD card, but both are Kingston 2gb.
What I do wrong ?

Try to use fix error and see if does the trick. I know my card did that one time, and i did fix errors, and its working just fine after that.

i've tried, but it didn't help
i think if this is not incompatibility between card and herm200.
As I wrote, this problem is repeating after some time of using device and copying files.

Coudy said:
i've tried, but it didn't help
i think if this is not incompatibility between card and herm200.
As I wrote, this problem is repeating after some time of using device and copying files.
Click to expand...
Click to collapse
might want to ask CRC on his thread directly he uses his kitchen in linux i think and i don't think he's having any issues

i think, that this isn't rom specific problem, because i had this problem on other roms too.

Coudy said:
i think, that this isn't rom specific problem, because i had this problem on other roms too.
Click to expand...
Click to collapse
Have you tried cleaning your SD card slot?

veyka said:
Have you tried cleaning your SD card slot?
Click to expand...
Click to collapse
no, but i''ll try it.
but i have question.
i had some rom (now i don't know which) with sd card fix or sd power management fix. Has Herm200 some problems with sd ?

micro sd card 128 gig

After i flash cr droid rom my phone doesnt read my sd card, it appear to be formated first, but getting message sd card not suported , any solution??

I'm not much of an AOSP ROM user on this device. But as far as I know, this is a common issue (or at least, it was) on AOSP ROMs.
This happened a lot on my old Samsung Tab Pro 8.4 on a few different AOSP ROMs. What sometimes worked for me, put the SD card in a USB card reader, connected to Windows PC. A dialogue box appeared asking to fix errors on the SD/drive. I picked the default selection, which was to fix error by some quick/fast method (forget the exact wording) which only took a few minutes, and retained the data on the card And then the SD would work again.
Although this didn't work every time, but did the majority of times I got this error. In the remaining cases, you may need to reformat the SD.

Known issue on current Nougat ROMs
https://forum.xda-developers.com/showpost.php?p=70512755&postcount=434

i can confirm what ckpv5 said in the linked post above
i had a similar issue
64GB card not working as it should,i can read the files without issues but when i write anything to it ( by any method to transfer data ) the data got corrupted
32GB card working fine with out issues at all
Sent from my HTC M8 using XDA Labs

ckpv5 said:
Known issue on current Nougat ROMs
Click to expand...
Click to collapse
Good to know. I guess I should have figured there were some hardware hiccups on the Nougat builds.