Develop Bugs

Anyone installed Black 3.0.1 on Vario II (T-Mobile)?

I'm currently running Black 2.5 (the T-MOB variant) and everything is fine.
But I'm tempted to upgrade to Black 3.x before I re-install all of my apps on my Vario (the speed improvement sounds good).
Has anyone with a Vario/T-Mobile installed Black 3.x? I see that there isn't (and will never be) a T-Mobile variant. What will I lose with a generic install? How hard is it to customise it for T-Mobile (UK)?
Thanks in anticipation.
Bobby

bobbyelliott said:
I'm currently running Black 2.5 (the T-MOB variant) and everything is fine.
But I'm tempted to upgrade to Black 3.x before I re-install all of my apps on my Vario (the speed improvement sounds good).
Has anyone with a Vario/T-Mobile installed Black 3.x? I see that there isn't (and will never be) a T-Mobile variant. What will I lose with a generic install? How hard is it to customise it for T-Mobile (UK)?
Thanks in anticipation.
Bobby
Click to expand...
Click to collapse
Yes and it worked perfectly.

bobbyelliott said:
I'm currently running Black 2.5 (the T-MOB variant) and everything is fine.
But I'm tempted to upgrade to Black 3.x before I re-install all of my apps on my Vario (the speed improvement sounds good).
Has anyone with a Vario/T-Mobile installed Black 3.x? I see that there isn't (and will never be) a T-Mobile variant. What will I lose with a generic install? How hard is it to customise it for T-Mobile (UK)?
Thanks in anticipation.
Bobby
Click to expand...
Click to collapse
Its fairly easy, all you really need are the internet and mms settings, look for a thread with operator settings in the title and find a cab file called t-mobile uk fixed.
Just drop it on to a storage card and run it whenever you do a hard reset or flash a new rom version.
Cant see why you would need the other t-mob customaizations as they mostly suck eggs.
Edit:cab file attached below

Here's the cab
Just drag to your Vario and run it.

chrisjasper said:
Its fairly easy,
Click to expand...
Click to collapse
Thanks Chris.
Let me get this right. Upgrade to Black 3.x. Copy CAB to device. Run CAB. Voila? This sets everything I need?
I agree most of the T-Mobile extras are crap but I need the settings for Internet/GPRS/MMS/SMS etc.
Cheers.

yes, working fine here, all connection settings set manually.

bobbyelliott said:
Thanks Chris.
Let me get this right. Upgrade to Black 3.x. Copy CAB to device. Run CAB. Voila? This sets everything I need?
I agree most of the T-Mobile extras are crap but I need the settings for Internet/GPRS/MMS/SMS etc.
Cheers.
Click to expand...
Click to collapse
Yep. I actually have a directory setup on my sd card called rebuilds with the cabs I need to reset my ppc up after flash/hard reset. Generally takes me about half an hour now to set up everything, including restores of pim records

chrisjasper said:
Generally takes me about half an hour now to set up everything, including restores of pim records
Click to expand...
Click to collapse
I'm with Orange and my flashing routine now is:
1) flash new rom
2) run pimping changes
3) manually enter gprs and mms settings
4) sync with 4smartphone exchange server
5) run smsproviders cab off Storage card (to sort voicemail)
6) install spb pocket plus and customise today launchers
7) set up two pop mail accounts
8) sign in and configure windows live messenger
Got it down to about 15 minutes now (but it does help that exchange server syncing is so damn quick.)

I tend to install things like Reader that like a soft reset so it takes me a little longer.

sinmae said:
yes, working fine here, all connection settings set manually.
Click to expand...
Click to collapse
Is it as fast as people say? Did you notice a speed improvement when you installed it?

MDA Vario II works with Black 3.01, what about rSAP?
Hi there,
Just as it has already been mentioned earlier (upgrade to 3.01 on T-Mobile MDA Vario II). I took the plunge today and installed version 3.01 straight from WM5. I was initially a bit apprehensive being my first update since I got the phone and I can confirm that it works well. I simply had to add the 3G and MMS settings back or just use the T-Mobile cab to get everything back to normal.
Speed actually seems faster than before. The question I have got now is what happened to the rSAP (Remote Simm Access Profile) as I need to ensure that I can use my phone in my "troublesome" Mercedes CLS. Never was able to pair it with the car so i'll be testing it tonight. I just noticed that the rSAP seems to be missing.
Any help on this will be greatly appreciated.
Vido.

It works a treat, however when i goto use Live Messenger it cannot connect and doesn't present me with a login form like it did with Black 2.0... Is anyone else having trouble with this? I'm using a Vario II, i've tried connecting over 3G, Wireless and through ActiveSync, all with no joy,

The service may be down, mine works without any hitch. Then again, I haven't and never do install any other third party software.

bobbyelliott said:
I'm currently running Black 2.5 (the T-MOB variant) and everything is fine.
But I'm tempted to upgrade to Black 3.x before I re-install all of my apps on my Vario (the speed improvement sounds good).
Has anyone with a Vario/T-Mobile installed Black 3.x? I see that there isn't (and will never be) a T-Mobile variant. What will I lose with a generic install? How hard is it to customise it for T-Mobile (UK)?
Thanks in anticipation.
Bobby
Click to expand...
Click to collapse
All working ok for me, web'n'walk back working and exchange server sync'd ok. TomTom OK. Calls OK...
Only problem I have is connecting to a WPA2 WLAN.... maybe me.... maybe the Black 3.0 (2.5 worked ok). Need to spend sometime looking this evening.
Justin

TomTom
Justin, I take it you have the app TomTom on your mobile, rather than being a 910 or similar?
I took one of the other WM6 ROMs and the DUN (data transfer) has been removed so I can only use it as a hands free device and not to update traffic over GPRS.

vido said:
Hi there,
Just as it has already been mentioned earlier (upgrade to 3.01 on T-Mobile MDA Vario II). I took the plunge today and installed version 3.01 straight from WM5. I was initially a bit apprehensive being my first update since I got the phone and I can confirm that it works well. I simply had to add the 3G and MMS settings back or just use the T-Mobile cab to get everything back to normal.
Speed actually seems faster than before. The question I have got now is what happened to the rSAP (Remote Simm Access Profile) as I need to ensure that I can use my phone in my "troublesome" Mercedes CLS. Never was able to pair it with the car so i'll be testing it tonight. I just noticed that the rSAP seems to be missing.
Any help on this will be greatly appreciated.
Vido.
Click to expand...
Click to collapse
I gave rSAP a try with an earlier black build, and I'm sorry to tell you that it behaved exactly the same as WM5 with the Merc car kit - i.e. just doesn't work (even once you've hacked the stack to make the Hermes look like a phone). If you get anywhere, it would be great to hear, but I'm afraid I think the Merc kit is just toooo limited in what it supports.

vido said:
I took the plunge today and installed version 3.01 straight from WM5. I was initially a bit apprehensive being my first update since I got the phone and I can confirm that it works well. I simply had to add the 3G and MMS settings back or just use the T-Mobile cab to get everything back to normal.
Vido.
Click to expand...
Click to collapse
Hi Vido.
I hope you read the extensive guides mr Vanx has done on upgrading. If not, consider this a stern warning to do so *now* (link in my sig)
Your post suggests that you did not put on the olipro bootloader which means you are taking a risk flashing any OS rom onto your phone - if something went wrong, you would brick your phone.
For you and anyone else reading this, please read Mr Vanx's guides and save yourself, and everyone else, the headache of trying to recover your phone as this stuff voids your warranty.
Cheers,
Smiffy.

ok guys im on tmobile usa and mms doesnt work at all on any of the new wm6 roms. do you guys suggest that i try the uk settings

Hi, you need to check this thread http://forum.xda-developers.com/showthread.php?t=299023
If USA not on here go to your T-Mobile website and do the settings manualy or get them from tech support...
Then post in the above thread!
Martyn

Hi Smiffy/All,
I actually followed all the instructions regarding upgrading to WM6 by flashing all the instructions in Mr Vangs guideline and used the 1.40.olipro bootloader. I just didn't type in all the details because of space. What I meant was that this is my first attempt at upgrading to WM6 after reading all the instructions in this forum.
Like I said my phone still does not work with the Mercedes Bluetooth UHI which is a pain and one of the reasons why I performed the upgrade. The other thing I have just noticed is that my ohne now finds it difficult to connect to my wifi at home using simple WEP key. I was only able to connect to my wifi at work only once after which it doesn't connect anymore. Has anybody else encountered this problem or is it only me.
Last question, is it possible to have the VOIP (Sip) work with T-Mobile? it shows up as "Service Blocked" and I read it somewhere that this can be tweaked. does anyone have the settings for testing this?
Apart from that the Black edition 3.01 is really cool.
Regards,
Vido.

no incomming calls with wm6

Hi
I just upgraded to the official WM6
The strange thing is that everything is ok except that people are unable to call me on the phone. I tested the sim on another phone and it was ok, but just not on WM6. I can still sms or call out, but just no incomming calls. The radio is 1.46.00.11 I have a suspicion that this could be the problem.
Anyway is anyone else experiencing the same problem? And whats the EASIEST way to fix this? This is driving me nuts!?!?!?!
Thanks

o.. and i also tried unticking the HSDPA in control panel as well as setting it to gsm only. still no luck. Anyone?

luckydip said:
Hi
I just upgraded to the official WM6
The strange thing is that everything is ok except that people are unable to call me on the phone. I tested the sim on another phone and it was ok, but just not on WM6. I can still sms or call out, but just no incomming calls. The radio is 1.46.00.11 I have a suspicion that this could be the problem.
Anyway is anyone else experiencing the same problem? And whats the EASIEST way to fix this? This is driving me nuts!?!?!?!
Thanks
Click to expand...
Click to collapse
Just curious, when you say "except that people are unable to call me on the phone", what does that mean? Do they get your voicemail, or does the phone ring (from their perspective) but you do not hear it actually ringing?
Also, you say you upgraded to the official WM6 rom. Which official one? Be more specific pls. Is it the Australian rom?

which official Rom? the Dopod Rom?

i upgraded to the htc official cht rom 3.00.708.9
When others call me now they jump straight into voicemail.
I actually tried ringing myself with another phone and found something really interesting.....
The wm6 device woke up (just like normal when someone called me) and then instead of ringing, it disconnects itself from the gsm network, and then connects itself again. Strange....
mad mad mad mad mad soon...any help greatly appriciated

Same pb
Just replace your SIM CARD......

cmfund said:
Just replace your SIM CARD......
Click to expand...
Click to collapse
Do you mean remove and it and put it back in? or go buy another sim?

digitalfreeze said:
Do you mean remove and it and put it back in? or go buy another sim?
Click to expand...
Click to collapse
why don't you try first other sim by a friend??
or try to change the radio...

ervius said:
why don't you try first other sim by a friend??
or try to change the radio...
Click to expand...
Click to collapse
I'm not having any problems with mine, just curious about the solution.

I have same problem of 1.46.00.11 or 1.46.30.11
digitalfreeze said:
Do you mean remove and it and put it back in? or go buy another sim?
Click to expand...
Click to collapse
Buy a new sim or change Radio to 1.41.00.11

thanks cmfriend....i tested the phone out with another sim and it works. apparently my phone did not like my sim card. So replacing the sim fixed the problem.
I seem to remember that i left my old sim in the phone when i upgraded to wm6. Was I suposed to take it out when flashing??
Thanks for all your help guys

luckydip said:
thanks cmfriend....i tested the phone out with another sim and it works. apparently my phone did not like my sim card. So replacing the sim fixed the problem.
I seem to remember that i left my old sim in the phone when i upgraded to wm6. Was I suposed to take it out when flashing??
Thanks for all your help guys
Click to expand...
Click to collapse
As far as I know removing the sim during upgrade is not mandatory.
Is the sim of your friend from a different provider?

+1 ----> go back Rom Radio version 1.41.00.11
I have the same probleme : no incoming calls with 1.46.00.11 and 1.46.30.11

i have the same porblem the olny i seem t be able to fix it is to reboot/reset the device

Had a exactly the same problem (including the wake up/disconnect/reconnect GSM symptoms) with Vodafone NZ - reverting to radio version 1.38 was the only fix.

Antzzz said:
Had a exactly the same problem (including the wake up/disconnect/reconnect GSM symptoms) with Vodafone NZ - reverting to radio version 1.38 was the only fix.
Click to expand...
Click to collapse
same for me...but with Fido...no problem since reflashing with 1.38

cant dial no. starting with +1 ,etc

hi,
i cooked a rom for myself with the kitchen program and now find that i cant dial numbers that start with +1 or any internatinal code
eg: +1 232892369283 but if i try to dial the same no. with no + sign ie just
232892369283 , i am able to call.....
i am with rogers in canada... what could be the issue.. the radio in my handset is 1.48 version...
please help.... as i have to edit the every number before i call

i changed the radio to 1.43 and still not working.. guess its something to do with the rom that i made... even tried installing the schaps rom...no way out???????

For the short term solution, have you tried to dial "00" instead of the "+"? They virtually do the same thing according to my understanding.

I REALLY dont need to use the 00 as i most of these numbers in my phone boook are local numbers, except that they were saved in the "+" format....
i tried to install all the available ROM s but none of them seem to solve this issue.. i am begining to think , either it could be a Rogers issue or i have screwed up something really bad

This isn't a Roger's issue as most of my numbers are dialed in international +1 format. So it must be the other one...
John

Same problem
Hi,
I have the same problem but only with VOIP calls. For GSM calls it works fine but with WM6 Inbuilt Voip calls it gives an error.

i have the same issue with mines...rogers...i notice it started to happen when i switch and put in my pay as you go chip...it use to work ok with my regular account...only started with pay as you go...is that what you are using

yes mine too is a pay as you go.. it was not like that always.. till saturday it was fine.. but i used to get this problem once in a while before but i thought that it was due to the rom that i was using... i never had such issues with my SE P990i phone that i had before....
Should i be calling rogers and ask ??? any not possible till tomorow evening

Strange problem with my Artemis

Hi,
My Artemis is got a strange problem
Its from O2 - Orbit called...
When I'm inserting Orange, Vodafone sim cards I get the error - Sim invalid - fine.. that's means is locked
With O2 is searching for a network but is searching for ever...can't find anything.. when I'm going in Network settings and select manual is saying something about Cannot read setting from network...
With Virgin/Tmobile sim card is finding OK the network and connecting to it but cannot make any phone calls or receive.....
Has anyone had a similar problem? I have tried to send it back to O2 but said they will send me send me a new one... they sent it but I never got it... it got lost in post etc... they didn't ask me to send the faulty one first... I contacted them a lot of times but they don't want to send me another one so I'm stuck with this faulty one.. I have reinstalled windows mobile 5 then upgraded to 6 but I have the same problem...

Did you try out the simcard in another device/phone? If it still fails then just ask for a new one.

yes I tried that sim card and works fine in another phone
also I tried lots of simcards in the xda but none works

I do have somewhat a similar problem. I am using an O2 SIM card on the orbit. A number of times the phone keeps looking for the network. Initially I used to wonder whethe rthe signal is weak - but if I soft reset it (and sometimes takes a couple of times), it finds the network (all bars in the signal) and works OK.
I have changed roms and it hasnt helped.

Since both of you are using the O2 Orbit I guess it must be something with the device. Any chance of finding out when your devices were manufactured?

i have the same problem with htc p3300 - have got signal with some of my sims, but can't make a call - what coul this be? I have 2 devices with these faults!!!

Hi,
I have exactly the same problem on my XDA orbit. O2 and orange sims, just keeps searching for a network with vodafone and t-mobile getting a signal but not allowing calls.
I thought that the phone was locked so I used the IMEI-check web site to download the unlock codes etc. This appeared to run normally, but made no difference to the operation of the phone.
I've done hard and soft re-sets but these make no difference either. The device has rom 3.4.206.2WWE (dated 4/18/07) installed on it and I would need some advice on what to change it to and how to change it.
Thanks for any help that anyone can come up with.

Blocked?
Try updating\upgrading radio ROM. If that does not work then I can only think that the phones have been blocked\barred by the network provider. Try calling them and asking them.
I have been informed that if your orbit is still on contract then it is still under warranty even if it is 2+ years old.

1.93 ROM cant find any network

I recently updated my ROM to 1.93 with Radio .05 and now my phone is not finding any service, it just has the ! mark on top. I went into connection settings and used both manual and auto settings and it cant find my t mobile network. I am using T mobile in the US and was wondering if any of you had any suggestions. Thanks for your help

Kutthoat5150 said:
I recently updated my ROM to 1.93 with Radio .05 and now my phone is not finding any service, it just has the ! mark on top. I went into connection settings and used both manual and auto settings and it cant find my t mobile network. I am using T mobile in the US and was wondering if any of you had any suggestions. Thanks for your help
Click to expand...
Click to collapse
hi,
did u find other providers or is the list completely empty ?

try the following 3 points of success
1)just try whether you can make a emergency call
2)hold your diamond to a speaker in your near and listen whether there is a strange noise(turn on the speaker loud)
3) if you had another pda try the sim in the device
post the results....

TomDaDj said:
try the following 3 points of success
1)just try whether you can make a emergency call
2)hold your diamond to a speaker in your near and listen whether there is a strange noise(turn on the speaker loud)
3) if you had another pda try the sim in the device
post the results....
Click to expand...
Click to collapse
thanks for the reply bro
in my area, t mobile and AT&T show up as networks but my phone will just not connect to them, its just says "searching" and stays that way
1) is 911 the only emergency call you can make cuz i really dont wanna get in trouble with the law you know haha
2) i do hear a strange noise when i turn the volume up
3) i put my sim in my old n95 and it works just fine
its like my diamond is not even detecting my SIM card, i put my friends AT&T SIM in it and it doesnt detect that either

Kutthoat5150 said:
thanks for the reply bro
in my area, t mobile and AT&T show up as networks but my phone will just not connect to them, its just says "searching" and stays that way
1) is 911 the only emergency call you can make cuz i really dont wanna get in trouble with the law you know haha
2) i do hear a strange noise when i turn the volume up
3) i put my sim in my old n95 and it works just fine
its like my diamond is not even detecting my SIM card, i put my friends AT&T SIM in it and it doesnt detect that either
Click to expand...
Click to collapse
just read this http://forum.xda-developers.com/showthread.php?t=434950
i've also got such a strange problem but now all works fine...
and btw at this crazy time i put my sim in a old nokia 3310 and he found
a network immediately then i put it back in 3 different pda's (all of them are working up to 100 percent) and all 3 devices found NO network...
at this time iam also going really crazy and desperate
i dont know the reason for my success, i just let the simcard over the night in a other pda and on the next morning magicaly all works fine...
can u choose between gsm and wcdma?

just do this
select the automatic provider pickup and the wait over 10 minutes...
when he found a network after a long waiting time try connect to gprs.
if gsm will work and you can call someone and gprs will not works simultaniously u know you have the same fun like me

TomDaDj said:
just read this http://forum.xda-developers.com/showthread.php?t=434950
i've also got such a strange problem but now all works fine...
and btw at this crazy time i put my sim in a old nokia 3310 and he found
a network immediately then i put it back in 3 different pda's (all of them are working up to 100 percent) and all 3 devices found NO network...
at this time iam also going really crazy and desperate
i dont know the reason for my success, i just let the simcard over the night in a other pda and on the next morning magicaly all works fine...
can u choose between gsm and wcdma?
Click to expand...
Click to collapse
Okay ill take a look at that, and yes I can choose between Auto, GSM, and WCDMA. I usually leave it on auto, but even when I switch to GSM it does not pick anything up.

TomDaDj said:
just do this
select the automatic provider pickup and the wait over 10 minutes...
when he found a network after a long waiting time try connect to gprs.
if gsm will work and you can call someone and gprs will not works simultaniously u know you have the same fun like me
Click to expand...
Click to collapse
holy potatoes i dont know what i just did but it worked!!! i put the SIM in my old N95 and it found the t mobile network. i sent some messages, made some phones calls, then put the SIM back in my diamond and it found the network!! wow thanks a bunch for your help bro, i cant thank you enough

okay scratch that it worked for a little bit, until I started installing some apps and had to restart my phone, now it cant find a network again when it booted back up. Is it the apps that im installing that might be causing this?

no man i dont think so...
i think that was a mistake by the sim or by tmobile self (i think if they have any problems, they didnt say anything to their costumers )
if you have the possibility to go a little bit away from your home, for example into downtown then do this and test if u get there a signal.
i live in vienna - austria. vienna has 23 districts - when i had this terrible problem - at least in 7 disctricts i became immediately a signal and in my own district i became to no time a gsm signal (or more accurately described - i became a gsm sigal after 5-10 minutes waiting time (every time i turn off and turn on the phone, always i had to wait about 5-10 minutes) then i could make calls but no internet connection was possible. but in the other 7 disctricts where ive been, all works fine
crazy or not crazy

TomDaDj said:
no man i dont think so...
i think that was a mistake by the sim or by tmobile self (i think if they have any problems, they didnt say anything to their costumers )
if you have the possibility to go a little bit away from your home, for example into downtown then do this and test if u get there a signal.
i live in vienna - austria. vienna has 23 districts - when i had this terrible problem - at least in 7 disctricts i became immediately a signal and in my own district i became to no time a gsm signal (or more accurately described - i became a gsm sigal after 5-10 minutes waiting time (every time i turn off and turn on the phone, always i had to wait about 5-10 minutes) then i could make calls but no internet connection was possible. but in the other 7 disctricts where ive been, all works fine
crazy or not crazy
Click to expand...
Click to collapse
thanks for the help man your awesome, i really appreciate it. but i think ive finally found the issue, when i restarted the phone it couldnt locate any network. but then i started to charge it and boom!! it found it again! so does the battery need to be near full for it to locate a signal? haha wow, craziest phone ive ever had!

Kutthoat5150 said:
thanks for the help man your awesome, i really appreciate it. but i think ive finally found the issue, when i restarted the phone it couldnt locate any network. but then i started to charge it and boom!! it found it again! so does the battery need to be near full for it to locate a signal? haha wow, craziest phone ive ever had!
Click to expand...
Click to collapse
thx - i do what i can
but i dont think that the problem is gone - you will see - it wont work long. i signal must be there - it should does make no matter whether the battery is - not load - half load or full loaded. it must always work! at 1% of battery it works on my device - it is impossible that that is the problem of you. go to the next tmobile store and let change your sim card - or make it like me - just wait 4 days - hope tmobile have fixed their problems - and be happy if it works.
otherwise it was a hardware issue and you have to send it back to tmobile for repair. but if you do this you must restore the stock software... otherwise you lose your guaranty!!

TomDaDj said:
thx - i do what i can
but i dont think that the problem is gone - you will see - it wont work long. i signal must be there - it should does make no matter whether the battery is - not load - half load or full loaded. it must always work! at 1% of battery it works on my device - it is impossible that that is the problem of you. go to the next tmobile store and let change your sim card - or make it like me - just wait 4 days - hope tmobile have fixed their problems - and be happy if it works.
otherwise it was a hardware issue and you have to send it back to tmobile for repair. but if you do this you must restore the stock software... otherwise you lose your guaranty!!
Click to expand...
Click to collapse
oh i forgot to say in the first post that my diamond is unlocked, im just using t mobile as my carrier on it but my phone is not locked to any network. so im not sure if its t mobiles fault but just my phone. My SIM card worked fine right away when i put it in my N95 8GB, but my diamond did not pick it up right away when i put it in. I had to plug in my charger first then a few seconds later it found a signal. Not sure why it did that, maybe just needed a little boost to grab that signal or something. Could it be the ROM or Radio I am using?

Kutthoat5150 said:
oh i forgot to say in the first post that my diamond is unlocked, im just using t mobile as my carrier on it but my phone is not locked to any network. so im not sure if its t mobiles fault but just my phone. My SIM card worked fine right away when i put it in my N95 8GB, but my diamond did not pick it up right away when i put it in. I had to plug in my charger first then a few seconds later it found a signal. Not sure why it did that, maybe just needed a little boost to grab that signal or something. Could it be the ROM or Radio I am using?
Click to expand...
Click to collapse
ok, then send it back to htc, or bring it to the store back where you bought it.
but do this only if you really see no more chance to fix it...
remember what i write, i try my sim in a nokia 3310 and it works, a few seconds later in diamond and 2 other pda's i got no network - back in nokia and it works i dont know how this could be possible!!!
i also try 5 different roms and all radios that exists too - and with all was the same - just nothing.
its your choice my friend - be patient and hope for better times or send it back to repair. but then also upload the original htc rom, radio and spl
i go now sleep - at vienna its 23 o'clock iam verrrrrrry tired from a hard working day...
but post further results, i read it tomorrow...

TomDaDj said:
ok, then send it back to htc, or bring it to the store back where you bought it.
but do this only if you really see no more chance to fix it...
remember what i write, i try my sim in a nokia 3310 and it works, a few seconds later in diamond and 2 other pda's i got no network - back in nokia and it works i dont know how this could be possible!!!
i also try 5 different roms and all radios that exists too - and with all was the same - just nothing.
its your choice my friend - be patient and hope for better times or send it back to repair. but then also upload the original htc rom, radio and spl
i go now sleep - at vienna its 23 o'clock iam verrrrrrry tired from a hard working day...
but post further results, i read it tomorrow...
Click to expand...
Click to collapse
thanks so much for your help bro, ya every time i unplug it from my charger it loses its signal, so i have to keep it charged just to talk on it or text. so i think i am going to have to send it back to htc for repair as i dont really know what is going on with it. thanks again man, really appreciate the help

same here
i have a very similar problem.
i can only make and receive calls on the wcdma network, but not on gsm.
in both, it says that i have reception, but when i try to make a call it just goes silent and after a while the call is ended.
if i dial *102# which is the number to access your mobile credit status, on wcdma it opens a little bubble coming from the network icon and says the correct values, on gsm it simply waits and says connection interrupted.
i have tried several roms and radios, and the problem persists...
you can view my current setup in my signature.
any ideas, what could be the problem? is it the hardware? does this have to do something with hungary?
the sim works just fine, since 1997 (i have no idea how can 3g work on this little baby, but it does) =D
any help appreciated! tx

sampi604 said:
i have a very similar problem.
i can only make and receive calls on the wcdma network, but not on gsm.
in both, it says that i have reception, but when i try to make a call it just goes silent and after a while the call is ended.
if i dial *102# which is the number to access your mobile credit status, on wcdma it opens a little bubble coming from the network icon and says the correct values, on gsm it simply waits and says connection interrupted.
i have tried several roms and radios, and the problem persists...
you can view my current setup in my signature.
any ideas, what could be the problem? is it the hardware? does this have to do something with hungary?
the sim works just fine, since 1997 (i have no idea how can 3g work on this little baby, but it does) =D
any help appreciated! tx
Click to expand...
Click to collapse
hi,
i was really wondering why this strange problem happens now on more and more users... thats really interessting....
did you try the sim in a other phone?
if it there also not work -> go to a store from your provider and told them that u have a old sim card which not works with your current phone.
normaly they should give you immediately a free new sim card.
and please tell me whether you have tmobile as your provider.
just for info because you write, that u can use 3g.... when i recieved my diamond i also had an old sim card which doesnt support UMTS or 3G but HSDPA was working, that cause because the sim is not responsible for this communication mode - only your phone!

the problem the guy has in this thread is almost exactly what i am experiencing right now
http://forum.xda-developers.com/showthread.php?t=409733&highlight=network+problem
except mine used to just keep restarting an wouldnt boot up so i just let it do that for about 10 min and it eventually loaded up. Is there a specific number I can dial that will reset my SIM card settings or something? My phone has been like this for a couple days now and it sucks not being able to call or text anybody.
I thought I solved this problem when I plugged in my charger to my phone, then it started finding the EDGE network but my signal was still being dropped when I made calls, only some text would go through and thats it. Please guys, somebody save me from this misery!

Kutthoat5150 said:
the problem the guy has in this thread is almost exactly what i am experiencing right now
http://forum.xda-developers.com/showthread.php?t=409733&highlight=network+problem
except mine used to just keep restarting an wouldnt boot up so i just let it do that for about 10 min and it eventually loaded up. Is there a specific number I can dial that will reset my SIM card settings or something? My phone has been like this for a couple days now and it sucks not being able to call or text anybody.
I thought I solved this problem when I plugged in my charger to my phone, then it started finding the EDGE network but my signal was still being dropped when I made calls, only some text would go through and thats it. Please guys, somebody save me from this misery!
Click to expand...
Click to collapse
to 100% the same what i've gotten and to 99% the same problem which you have.
BUT its very interessting, all guys what had this problem use t-mobile as the provider.... very strange.....
BTW because in the thread http://forum.xda-developers.com/showthread.php?t=409733&highlight=network+problem
the guy postet
Intradvocate said:
Okay, nope not fixed... Flashed it with 1.37, connected to the network for a few seconds, dialed somebody and no ring or anything, but when i called my phone i could hear my own voice. So I guess i have to send it in for repair. Damn.
Click to expand...
Click to collapse
at this bad time i also restore to stock rom 1.37 and he found in 1 second a signal BUT then it was also impossible to make an internet connection...

ya i was starting to think it was tmobiles problem until I put my friends AT&T SIM in and it was doing the same thing. It would just say "searching" and thats it, and well I just charged up my phone to almost full battery and it located a signal again. But it still drops calls almost immediately and I can only send text. Does the 1.93 ROM do anything to the Radio or antenna because it has been like this even when I flash back to earlier ROMS and radios. I am almost sure that flashing or changing radios will not solve the problem because I have done that countless times already.