Related
So has anyone bought a silicon like case yet. I have been hoping someone would have put up a review for a case by now. So if you have bought a case for the aria where did u get it? And how good is it? Brand-name? Price? Etc.
Thanks in advance!
Sent from my HTC Aria
Got a case from at&t store its great in quality. already droped a few times with no issues. I think its the htc brand one. It cost like 20 bucks but its tougher and firmer than most silicon style cases ive seen. Also not as sticky as most so it slides in your pocket easier. Although its still sticky when its 92 degrees out like it was today.
sunny342 said:
So has anyone bought a silicon like case yet. I have been hoping someone would have put up a review for a case by now. So if you have bought a case for the aria where did u get it? And how good is it? Brand-name? Price? Etc.
Thanks in advance!
Sent from my HTC Aria
Click to expand...
Click to collapse
The Amzer silicone one provides good protection but is bulky and does not fit snuggly on the phone. I could imagine the phone slipping out of the case to indicate how loosely it fits.
When I picked mine up from the AT&T store, they had a pretty nice soft shell case for $25. It was nice looking, fit the phone well (I almost couldn't get the thing off), and looked like it would provide decent protection. I skipped on buying it, however, since the price seemed a bit steep.
i just went to the ATT store today and they had a glossy black (maybe gunmetal) hard case for the aria, it was 25 bucks and i didnt feel like spending that much when i could get the same online for cheaper, but it did look nice.
didnt get a chance to put it on the phone though.
also, it was in a package that said soft case.
I love how this phone feels like it already has a case on it! I haven't dropped the phone (yet, thankfully) but If i did i would be too distraught. I just want to be able to buy a replacement back cover (OEM) for less than $30.
yanney said:
i just went to the ATT store today and they had a glossy black (maybe gunmetal) hard case for the aria, it was 25 bucks and i didnt feel like spending that much when i could get the same online for cheaper, but it did look nice.
didnt get a chance to put it on the phone though.
also, it was in a package that said soft case.
Click to expand...
Click to collapse
yeah, it is the case that says HTC on the back, and its the only one they have. its horrible, and very troublesome to unlock the phone.
jbizz said:
yeah, it is the case that says HTC on the back, and its the only one they have. its horrible, and very troublesome to unlock the phone.
Click to expand...
Click to collapse
It's a nice hard-ish version of your typical silicone case. It's actually really good and sturdy and my only gripe is that it's a pain to unlock it.. so I use No Lock, which allows you to unlock the phone with any button...the optical touchpad has become my new best friend
AS ANYONE TRIED USING A HD MINI SILCON CASE, OR DOES ANYONE KNOW IF IT WILL FIT. aS WELL AS PRESSING THE UNLOCK BUTTON. damn caps lock sorry
sunny342 said:
AS ANYONE TRIED USING A HD MINI SILCON CASE, OR DOES ANYONE KNOW IF IT WILL FIT. aS WELL AS PRESSING THE UNLOCK BUTTON. damn caps lock sorry
Click to expand...
Click to collapse
The Amzer silicon case purchased actually says HD Mini on its packaging. It is quite a loose-fitting case. The one from AT&T, which is more of a plastic smoke translucent case, fits very snuggly with the only downside that it's $25. It says HTC on its back and the silver HTC logo of the phone itself shows through nicely.
AzNnYx said:
It's a nice hard-ish version of your typical silicone case. It's actually really good and sturdy and my only gripe is that it's a pain to unlock it.. so I use No Lock, which allows you to unlock the phone with any button...the optical touchpad has become my new best friend
Click to expand...
Click to collapse
yeah, i really liked the case... so i might just have to try your method. thanks!
clickclickpc said:
The Amzer silicon case purchased actually says HD Mini on its packaging. It is quite a loose-fitting case. The one from AT&T, which is more of a plastic smoke translucent case, fits very snuggly with the only downside that it's $25. It says HTC on its back and the silver HTC logo of the phone itself shows through nicely.
Click to expand...
Click to collapse
Where did u buy the amzer case because on amazon it say that they will start shipping between 1 and 3 months
sunny342 said:
Where did u buy the amzer case because on amazon it say that they will start shipping between 1 and 3 months
Click to expand...
Click to collapse
Amzer.com has them in stock.
Has anyone tried the luxe cases from amzer?
Sent from my HTC Liberty using XDA App
Anyone want to upload some picture or a video of the "snugness" of the amzer silicon case.
Is it anything like this
or at this link
http://forum.xda-developers.com/showthread.php?p=6444898
sunny342 said:
Anyone want to upload some picture or a video of the "snugness" of the amzer silicon case.
Is it anything like this
or at this link
http://forum.xda-developers.com/showthread.php?p=6444898
Click to expand...
Click to collapse
Don't have the case anymore, but you can fit an index finger between the case and the phone without much effort.
jbizz said:
yeah, i really liked the case... so i might just have to try your method. thanks!
Click to expand...
Click to collapse
LockBot also allows you to use the optical to wake up.
I just bought my wife a case from pdair for the hd mini and it fits great. The have a number of good colors and its snug as a bug.
It's a very durable silicon skin. Comparable to the one from at&t but its actually easier to push the buttons with the pdair case. So its confirmed for me: hd mini cases work great for th aria.
Sent from my HTC Aria
discord2k said:
I just bought my wife a case from pdair for the hd mini and it fits great. The have a number of good colors and its snug as a bug.
It's a very durable silicon skin. Comparable to the one from at&t but its actually easier to push the buttons with the pdair case. So its confirmed for me: hd mini cases work great for th aria.
Sent from my HTC Aria
Click to expand...
Click to collapse
I just ordered myself one, thanks for this info
how are does Amzer® Rubberized Black Snap On Crystal Hard Case fit?
Anyone try this one yet?
http://store.cheapdroids.com/Amzer-Rubberized-Black-Snap-On-Crystal-Hard-Case-aria.html
discord2k said:
I just bought my wife a case from pdair for the hd mini and it fits great. The have a number of good colors and its snug as a bug.
It's a very durable silicon skin. Comparable to the one from at&t but its actually easier to push the buttons with the pdair case. So its confirmed for me: hd mini cases work great for th aria.
Sent from my HTC Aria
Click to expand...
Click to collapse
Hum.. I'm thinking about picking one up. I wish Otterbox had a case for the Aria. I'm prone to dropping my phone, so I want something that will protect it from at least minor falls.
I'm looking for a belt clip holster for my Captivate. I want one that holds the phone horizontally, and something with a magnetic flap. Does anyone have any suggestions?
sn1per420 said:
I'm looking for a belt clip holster for my Captivate. I want one that holds the phone horizontally, and something with a magnetic flap. Does anyone have any suggestions?
Click to expand...
Click to collapse
I found one at Best Buy that fit with the soft Body Glove case on. I think the name was Rhino-case or something like that. I'm probably going to keep looking, the belt clip on this one isn't all that great.
I saw one like your talking about on one of the forums. It was an OEM holster that had a metal tag on it that said "Galaxy S". I haven't been able to find that holster for sale OR find the originally forum article where I saw it
This is what I ordered yesterday off Amazon. Just got shipped, so I haven't personally examined it, but it fits the description of what you need.
Executive Black Horizontal Leather Side Case Pouch with Belt Clip and Belt Loops for Samsung Captivate i897 [Accessory Export Brand Packaging]
meatrocket said:
I saw one like your talking about on one of the forums. It was an OEM holster that had a metal tag on it that said "Galaxy S". I haven't been able to find that holster for sale OR find the originally forum article where I saw it
Click to expand...
Click to collapse
you mean this?
http://www.samsung.com/us/consumer/...pagetype=acc_detail&subsubtype=cases-holsters
Rajendra, I bought something similar off ebay a while back for my last phone, and the leather around the belt clip started ripping after 2-3 months of use. I'd really like something that's going to last at least a year or two, if not longer.
rajendra82 said:
This is what I ordered yesterday off Amazon. Just got shipped, so I haven't personally examined it, but it fits the description of what you need.
Executive Black Horizontal Leather Side Case Pouch with Belt Clip and Belt Loops for Samsung Captivate i897 [Accessory Export Brand Packaging]
Click to expand...
Click to collapse
It looks very wide to me - for a thicker phone. Much like a lot of the universal cases.
I have the body glove case from AT&T and with that, it fits pretty nicely into the spring loaded holster case for the Droid X from Verizon! Lol
I'll put up some pics if anyone's interested or whenever I get the chance
I'm interested...
F_L_Abs said:
I have the body glove case from AT&T and with that, it fits pretty nicely into the spring loaded holster case for the Droid X from Verizon! Lol
I'll put up some pics if anyone's interested or whenever I get the chance
Click to expand...
Click to collapse
If you could post pics it would be nice.
Best case, IMHO, is the Case Logic ITEM # CLP403SPH.
Simple clean lines, fits like a glove, black leather with contrast tan stitching and suede tan inner lining.
I search for several days and found this case at Target for $20.
F_L_Abs said:
I have the body glove case from AT&T and with that, it fits pretty nicely into the spring loaded holster case for the Droid X from Verizon! Lol
I'll put up some pics if anyone's interested or whenever I get the chance
Click to expand...
Click to collapse
I would love to see how it looks
Here's a little video... Sorry I was too lazy to find my camera so the closest thing was an Ipod Nano lol
One thing that does worry me about this is that the screen has to face out so it can be pretty nerve racking if you bump into things a lot...
You can make the screen face in, but it won't fit if you have a case on. It also doesn't feel so secure.
One of the main reasons I like this though is that I can keep it secured, out of my pocket, and I can still leave my earphones on it listening to music! (I messed up quite a few earphones jamming my devices into my pocket with them plugged in)
http://www.youtube.com/watch?v=QywUIYBb-2Q
F_L_Abs said:
Here's a little video... Sorry I was too lazy to find my camera so the closest thing was an Ipod Nano lol
Click to expand...
Click to collapse
Hm.. Seams like we can make car mount with this combo as hxxp://forums.overclockers.co.uk/showpost.php?p=16992427&postcount=2
I just had to see if I liked the holster you were talking about so went to the store and asked for it. It was in the back and when he came out had a different one. I like it better and the face is in.
All it says is " shell/holster combo". of course I only used the holster.
29.99 cost. Works right though with the body glove on. Solid too.
sn1per420 said:
I'm looking for a belt clip holster for my Captivate. I want one that holds the phone horizontally, and something with a magnetic flap. Does anyone have any suggestions?
Click to expand...
Click to collapse
I got this delivered from Amazon today. Seems very well made for the price, and fits the naked Captivate perfectly. Unfortunately it is way too tight with the body glove on, so it's either one or the other.
Oh nice! I really like the spring loaded feature on mine, but I think it's more important to cover the face! Lol.
Can you still plug in earphones with it clipped on the case? Is it also really easy to put on and remove?
Sent from my SAMSUNG-SGH-I897 using XDA App
F_L_Abs said:
Oh nice! I really like the spring loaded feature on mine, but I think it's more important to cover the face! Lol.
Can you still plug in earphones with it clipped on the case? Is it also really easy to put on and remove?
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
YEP works perfect.
trurotor said:
I just had to see if I liked the holster you were talking about so went to the store and asked for it. It was in the back and when he came out had a different one. I like it better and the face is in.
All it says is " shell/holster combo". of course I only used the holster.
29.99 cost. Works right though with the body glove on. Solid too.
Click to expand...
Click to collapse
That looks nice, so thats for the Droid X originally?
smeltn said:
That looks nice, so thats for the Droid X originally?
Click to expand...
Click to collapse
yes it is. I wonder if just the belt clip is available separately? Don't really need the cover. Might be cheaper. Like me.
I moved from a Tilt2. I have been using a Palm Treo case since my old Tilt. While looking for a case, I used the Treo case with the Body Glove cover. I was planning to use it until I found a better fitting case. It was too tight a fit to use.
In the past couple of days, the case has been forming it to the phone and now it fits perfectly. I buy these things a couple at a time so when they wear out, I have another. It looks like I'll be using this case until I cannot find it anymore.
Here's links to 2 Droid X cases at Verizon.
http://www.verizonwireless.com/b2c/...&archetypeId=12207&accessoryPageType=category
http://www.verizonwireless.com/b2c/...&archetypeId=12204&accessoryPageType=category
Has anyone seen one that will fit yet ?
The leather, clip on your belt style (yes, I know, old school).
I really need the protection at work, I'm a contractor.
It's just too bulky of a phone to put in a pants pocket and it will stretch out a shirt badly if you try the shirt pocket.
Amzer has them. Anyone have any experience with their products?
http://www.amzer.com/Samsung/Samsung-Vibrant-T959-accessories.htm
I don't see one with a belt clip, those all appear to be just wallets.
I have no experience with thier goods, in fact never heard of the site before you posted about it.
I contacted "Otter case" to ask about them possibly making one (Otter makes outstanding cases).
otterbox dot com
n2ishun said:
Has anyone seen one that will fit yet ?
The leather, clip on your belt style (yes, I know, old school).
I really need the protection at work, I'm a contractor.
It's just too bulky of a phone to put in a pants pocket and it will stretch out a shirt badly if you try the shirt pocket.
Click to expand...
Click to collapse
http://cgi.ebay.com/Leather-Case-Co...ewItem&pt=PDA_Accessories&hash=item1c145cf66e
Thx Sugarmouth.
That is what I am looking for....but no offense, that one is a bit tacky to my tastes.
I'll probably end up getting a Body Glove or a Otter defender when they hit the market.
But, untill then, I am going to hit up Tandy Leather today and get some *stuff* to make my own
BTW, Otter replied...
Update for Case #161412 - "Samsung Vibrant"
We do not have any information if a case will be made at this time for that device, but it is something that has been requested. I have submitted a product suggestion on your behalf, and recommend keeping an eye on our website, as it will have the most up to date information on any new releases that we may have.
Thank you, and Have a Great day!
Mandi Hrdlicka
Click to expand...
Click to collapse
Is it just me, or is that name *somehow* fascinating ?
Any iphone 3g case with stretch sides will work. Got mine from wally world for $14.
Sent from my SGH-T959 using XDA App
I order this one
http://www.mycellworld.com/Motorola...m-Universal-Pouch-Yellow-P65926179-P81177.htm
n2ishun said:
Thx Sugarmouth.
That is what I am looking for....but no offense, that one is a bit tacky to my tastes.
I'll probably end up getting a Body Glove or a Otter defender when they hit the market.
But, untill then, I am going to hit up Tandy Leather today and get some *stuff* to make my own
BTW, Otter replied...
Is it just me, or is that name *somehow* fascinating ?
Click to expand...
Click to collapse
How about all black?
http://cgi.ebay.com/Leather-New-Cas...ewItem&pt=PDA_Accessories&hash=item19be300843
You can try the Leather Belt Clip case for a Droid X available at most Verizon stores. It will fit your Vibrant perfectly when placed in the T-Mobile Gel Skin...
I personally use a leather case I found on ebay a while ago. It was for a G1 and my Vibrant fits just fine in it. The g1 isn't as wide, but is thicker so it more or less makes up for the difference. Not to mention I used to use my G1.
I tried to find you one quick on ebay to give you an idea, but I kept finding them with magnetic opposed to snaps or velcro. I know the magnetic ones used to drive the compus bokers on the G1 so I figured why wouldn't it drive the Vibrant bonkers.
rorycs said:
You can try the Leather Belt Clip case for a Droid X available at most Verizon stores. It will fit your Vibrant perfectly when placed in the T-Mobile Gel Skin...
Click to expand...
Click to collapse
Is this the one?
http://mobileaccessories.bestbuy.com/verizon-leather-side-case/4A120A7314.htm
Got a Casemate tough case for my one x had one on my DHD for two years and its still going strong fits good offers two parts of protection rubber inner case then hard plastic outer case protects the camera all cutouts are fine screen protected as front lip raised will post pics later
Sent from my HTC One X using xda premium
Who did you order it through in the UK ??
I got it from carphone warehouse my brother works there so got it cheaper than else where
Sent from my HTC One X using xda premium
Looking good, Casemate make good products. I had their Barely There case on my DHD
Yo,
I had one of these bad boys for my Incredible S so ordered one a few days back for the One X.
I've just realised something. With this case on, you lose the connectivity of the rear docking port (little metal dots) or I presume you do anyway.
E.G you wouldn't be able to use this dock I don't think
http://www.mobilefun.co.uk/htc-cr-s650-desktop-cradle-with-speakers-for-htc-one-x-p34381.htm
Can anybody clarify?
You can't use a dock with any case, so no point having holes
As HTC whore says you cant use any case with a docking station you would just remove the case to use the dock then put it back on when going out with your phone
I have this case, so hard to take it off!
Picked one up from the Blackpool store this morning, will be taking it back for a refund tomorrow. Daren't even fit it, it's that tight a fit. If it's tight to get on I doubt I'll get it off. The phone is pretty slim and I have visions of snapping it !!
It's not hard to take off at all, I've put mine on and off a few times
Sent from my iPad using Tapatalk HD
Indeed, the case isn't hard to take on and off. If anything I had to take it on and off only to line up the grooves for the speaker hole and made sure the edges weren't squished down. The case is nice but only drawback is how much lint/dust it attracts on the rubber/silicon part.
I agree only drawback is the dust etc om the rubber section but for the protection it offers I am happy
Sent from my HTC One X using xda premium
HTC whore said:
You can't use a dock with any case, so no point having holes
Click to expand...
Click to collapse
That's a very generalised statement, and you come accross pretty arrogant if I'm honest ........ If thats true why do the official HTC cases have a cut out for the Pogo port ?
Also, Mine isn't straight on the bottom edge. Is anybody elses like this?
The hard plastic part is almost wavey on the bottom, this stops the soft rubber sitting properly - Got pictures if needs be
deanfarnaby said:
That's a very generalised statement, and you come accross pretty arrogant if I'm honest ........ If thats true why do the official HTC cases have a cut out for the Pogo port ?
Also, Mine isn't straight on the bottom edge. Is anybody elses like this?
The hard plastic part is almost wavey on the bottom, this stops the soft rubber sitting properly - Got pictures if needs be
Click to expand...
Click to collapse
same with mine. it isn't flush with the rubber either, kinda bothers me sometimes.
deanfarnaby said:
Mine isn't straight on the bottom edge. Is anybody elses like this?
The hard plastic part is almost wavey on the bottom, this stops the soft rubber sitting properly - Got pictures if needs be
Click to expand...
Click to collapse
Full Size Images
deanfarnaby said:
Full Size Images
Click to expand...
Click to collapse
Yeah mine is like that too, little surprised to be honest but I can live with it.
email [email protected]
matw01 said:
Yeah mine is like that too, little surprised to be honest but I can live with it.
Click to expand...
Click to collapse
Please email [email protected] and we will be happy to replace it for you, as the case should not be warped.
CaseMate said:
Please email [email protected] and we will be happy to replace it for you, as the case should not be warped.
Click to expand...
Click to collapse
Well done Case-Mate in taking an interest in these forums. Very impressed with your customer support. Emailed you recently on a separate issue and it was sorted immediately.
It's appreciated.
Sent from my HTC One X using xda premium
CaseMate said:
Please email [email protected] and we will be happy to replace it for you, as the case should not be warped.
Click to expand...
Click to collapse
I have emailed you guys but I bought the case from Amazon so not sure where I stand there.
I have also noticed - the "Lock/Unlock" rubber on the inner case does not 100% line up with the actuall button on my phone. I would say its around 3-4mm over to the left, It still covers around half the button so it does press but it's not as responsive as it should be and I am always pressing my button on one side (Could eventually cause a problem)
I am begining to think my case may be a clone - Another thing I have notice is the hard plastic part is nowhere near as grippy as my last case mate case. It's kinda slippy.
Build quality on my last case mate case was amazing - this one is below average , at best.
I tried to get it on video - in the loo at work, sorry about that haha.
I had to use front camera and a mirror as I don't have another camera on me atm
I marked the CaseMate button A and the phone button B
It's quite hard to see but you can make it out
Anybody else's like this ?
deanfarnaby said:
I have emailed you guys but I bought the case from Amazon so not sure where I stand there.
I have also noticed - the "Lock/Unlock" rubber on the inner case does not 100% line up with the actuall button on my phone. I would say its around 3-4mm over to the left, It still covers around half the button so it does press but it's not as responsive as it should be and I am always pressing my button on one side (Could eventually cause a problem)
I am begining to think my case may be a clone - Another thing I have notice is the hard plastic part is nowhere near as grippy as my last case mate case. It's kinda slippy.
Build quality on my last case mate case was amazing - this one is below average , at best.
I tried to get it on video - in the loo at work, sorry about that haha.
I had to use front camera and a mirror as I don't have another camera on me atm
I marked the CaseMate button A and the phone button B
It's quite hard to see but you can make it out
Anybody else's like this ?
Click to expand...
Click to collapse
The power button on the tough case is misaligned and indeed the hard case is pretty slippery. I hope case-mate corrects these issues.
Can somebody please manufacture a high quality leather case for the HTC U11+ ?
I can't find one online. Does it even exist yet?
Please let me know if you find a good leather case for it.
Thank you.
The case should offer enough protection while at the same time supporting the edge sense feature.
I used the included Clear plastic case, AND then purchased a high quality leather case from Piel Frama which has a pull tab.
The IPhone 7 plus case is a perfect fit for the U11+ with the included clear case.
I don't think that there will be many cases for this device as the U12 is 6 months away.
globalgpj said:
I used the included Clear plastic case, AND then purchased a high quality leather case from Piel Frama which has a pull tab.
The IPhone 7 plus case is a perfect fit for the U11+ with the included clear case.
I don't think that there will be many cases for this device as the U12 is 6 months away.
Click to expand...
Click to collapse
can you show some picture about your leather case?
See attached photos.
Fits like a glove !
globalgpj said:
See attached photos.
Fits like a glove !
Click to expand...
Click to collapse
Great how much does it cost ?
what screen protection do you use (link please)?
See link below.
Hands down, Piel Frama makes the best quality leather cases in the world.
https://www.pielframa.com/en/producto/iphone-7-plus-cases/pull-style
There are a lot of colours and a couple of textures available.
I haven't used screen protectors for years. Not necessary if you use a pouch/case for protection.
globalgpj said:
See link below.
Hands down, Piel Frama makes the best quality leather cases in the world.
https://www.pielframa.com/en/producto/iphone-7-plus-cases/pull-style
There are a lot of colours and a couple of textures available.
I haven't used screen protectors for years. Not necessary if you use a pouch/case for protection.
Click to expand...
Click to collapse
thanks
There are 4 small holes on the bottom right of the pouch. This allows for the speaker notification sounds to come through easily when the phone is in the pouch. Very clever. Perfect for this device.
This is one of the many problems with the leather cases on amazon. The product images are clearly fake.
I found this online,
https://www.casefanatic.com/htc/bus...r-cover-oneplus-5-oneplus-5t-htc-u11-htc-u11/
Have no idea about the quality but it looks good to my eyes :fingers-crossed:
Edit: The exact same case as above is available in aliexpress for half the price.
Edit: I found one more https://www.noreve.com/en/u11/3475-htc-u11-leather-cover.html
The above link is for U11 but they are currently in the process for making it for U11+ as well. Expensive but looks very high quality.
http://bit.ly/2CnzvQe
frevell said:
http://bit.ly/2CnzvQe
Click to expand...
Click to collapse
Looks good but where is that magnetic thing to close the case?
Also how does the phone sit inside the case? I don't see a silicone cover glued inside the leather case...
Please show more pics of it.
Does it provide sufficient protection for the edges of the phone?
Are all buttons easily accessible?
lebigmac said:
Looks good but where is that magnetic thing to close the case?
Also how does the phone sit inside the case? I don't see a silicone cover glued inside the leather case...
Please show more pics of it.
Does it provide sufficient protection for the edges of the phone?
Are all buttons easily accessible?
Click to expand...
Click to collapse
I received it today (1-9) . Cannot find a magnet. So it will not close by itself. Inside there is a glued cover (plastic) Fits, nice. All buttons are accessible and all the microphones are accessible too. Smells like real leather. Nicely wrapped in a box and bubble plastic.
Noreve has 3 models available now for pre-order, I ordered one (back cover only), should get it by the end of the month...
frevell said:
I received it today (1-9) . Cannot find a magnet. So it will not close by itself. Inside there is a glued cover (plastic) Fits, nice. All buttons are accessible and all the microphones are accessible too. Smells like real leather. Nicely wrapped in a box and bubble plastic.
Click to expand...
Click to collapse
I also got the same a few days ago. https://goo.gl/9t2V3u
It is of a very good qualtity and smells like real leather. The top cover attatch to the bottom with a magnet. If it don't you have to bend the top cover to back and front a few times because the new leather is stiff. After that mine attach to the bottom without any problem.
But, the opening to the volume and power -button is too small for me. You need small fingertips or use your nail to reach them. Its also missing an opening for the led at the top so I can't see it when charging or messages has arrived. Also it is very hard to use the fingerprint scanner if you don't have small fingertips. I have inform the seller/company about this and they will probably fix i in the next batch, they say.
As I said the quality is very good, exept what I have mentioned but maybe a bit overdone. With this case the package feels very thick, with the plastic bed for the phone and quite thick leather on top of that again. Solid, looks very exclusive no doubt, but to mutch I think.
fasst said:
I also got the same a few days ago. https://goo.gl/9t2V3u
It is of a very good qualtity and smells like real leather. The top cover attatch to the bottom with a magnet. If it don't you have to bend the top cover to back and front a few times because the new leather is stiff. After that mine attach to the bottom without any problem.
But, the opening to the volume and power -button is too small for me. You need small fingertips or use your nail to reach them. Its also missing an opening for the led at the top so I can't see it when charging or messages has arrived. Also it is very hard to use the fingerprint scanner if you don't have small fingertips. I have inform the seller/company about this and they will probably fix i in the next batch, they say.
As I said the quality is very good, exept what I have mentioned but maybe a bit overdone. With this case the package feels very thick, with the plastic bed for the phone and quite thick leather on top of that again. Solid, looks very exclusive no doubt, but to mutch I think.
Click to expand...
Click to collapse
I got a new leather case today. https://goo.gl/ea8Jr4
It feels lighter and not so compact/heavy as the earlier mentioned case.
But this case as the earlier one is missing a hole/opening for the charger/message-LED. It seems that companies who make this leather cases is missing this. The LED is not visible on the phone until it lights up. On the first case I made a hole for it but on this one, if I make one, it will destroy one of the vertial seam.
fasst said:
I also got the same a few days ago. https://goo.gl/9t2V3u
It is of a very good qualtity and smells like real leather. The top cover attatch to the bottom with a magnet. If it don't you have to bend the top cover to back and front a few times because the new leather is stiff. After that mine attach to the bottom without any problem.
Click to expand...
Click to collapse
You are right. After a few days of use I noticed there is a magnet. Sorry.
Received my noreve case, I got the synthetic leather one, back only ( there was a discount going on at the time, got it for 29€). Took about 20 days for delivery.
First impression is very positive, on first sight feels like really high quality, the synthetic leather seems to be of a high quality kind, fits perfectly... exept two things, one I knew about, the other one, I could live with.
First is the big cut outs for the squeeze feature, they look kinda ugly and we know that this feature works with most cases anyway... Thats why I got the black case to minimize this cutout...but still, not good.
Second thing is that the back mic cutout is not centered, mind you it doesn’t cover the mic, but just barely.
So in its current state, I wouldn’t buy it again, but having started a mail exchange with them, as it is a handmade on order brand, I think I will be able to place a special order without the cutout and with the mic hole centered correctly...
Will let you know how it goes...
Ok so my last update on the noreve case, I decided to return the one I got, didn't look good with the big cutouts for the squeeze feature...
Also they couldn't accomodate my idea for a case without these cutouts, as it would have been too expensive and too difficult for a one off case...
Back to square one, did not find a really nice case yet...
ziplepingouin said:
Ok so my last update on the noreve case, I decided to return the one I got, didn't look good with the big cutouts for the squeeze feature...
Also they couldn't accomodate my idea for a case without these cutouts, as it would have been too expensive and too difficult for a one off case...
Back to square one, did not find a really nice case yet...
Click to expand...
Click to collapse
As I see the issue isn't in the case ...
sent from my translucent black hTc