Hi guys I have a MDA Compact III and after flashing it bricked and won't start anymore. I can get into the bootloader(IPL 1.13.0001 SPL 1.13.0000). I've tried a lot of roms but it won't work. I keep getting the ERROR [300] Use a newer update utility .
I even tried the Artemis_SD_Card_Flashing, but i wont update. http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
I think that my mda is still CID locked. I thougt it was unlocked.
has someone a solution for this problem. thanks.
solution, maybe. Enter brick into search under arte upgr. forum. 100x already at least 10threads.
phsnake said:
solution, maybe. Enter brick into search under arte upgr. forum. 100x already at least 10threads.
Click to expand...
Click to collapse
I know I already searched my solution wasnt there
Have you tried flashing the original carrier rom ?
illusion786 said:
Have you tried flashing the original carrier rom ?
Click to expand...
Click to collapse
yes i already tried...
Your mobile is locked. SPL for unlocked is 1.11.0000. Did you try to run USPL while in bootloader?
freco: waste of time, before flashing USPL it must be in Async. USPL uses to "flash itself" some kind of fake bootloader. To enter this fake bootldr some files must be copied to device thru pdocwrite, in bootloader they cant.
pdocwrite
phsnake said:
freco: waste of time, before flashing USPL it must be in Async. USPL uses to "flash itself" some kind of fake bootloader. To enter this fake bootldr some files must be copied to device thru pdocwrite, in bootloader they cant.
Click to expand...
Click to collapse
Explain me.About pdocwrite Step by Step please.
wrong person 2 ask, i dont know how exactly it works. But i think it has direct access to DOC(its equivalent 2 FAT).... But if U cannot connect Async its useless
Can someone still help please?
I have a s620 Excalibur. Stuck in bootloader any help will be apprciated.
eddiesantiago said:
I have a s620 Excalibur. Stuck in bootloader any help will be apprciated.
Click to expand...
Click to collapse
IF you pull your battery and restart, is it still in bootloader?
Yes even after taking out the battery it goes into bootloader mode.
Exit bootloader: hold camera key, wait three seconds and hold down power key also until phone turns off
If it still boots into bootloader you may have to flash via SD card. Search the forum for my previous posts (use nbh from WM5.0 then upgrade to WM6.X).
eddiesantiago said:
I have a s620 Excalibur. Stuck in bootloader any help will be apprciated.
Click to expand...
Click to collapse
well if it does that u should flash it wit the original rom the phone came with
...it worked for me
CHEKO15 said:
well if it does that u should flash it wit the original rom the phone came with
...it worked for me
Click to expand...
Click to collapse
Yes just use the link below to find official (original) roms and you should be able to get this working if you flash your phone with the original rom it came with
the case here is that my volume rocker and power buttons are a bit laggy that i some times have to click 5 or 6 times in order for them to work ... and my phone is still under warranty so i sent it to get repaired they told my they need to change the main board and that i broke the warranty terms by installing CM7 and unlocking boatloader and they told me also that if i could restore the phone exactly as it was they would repair it so please tell me how to restore every thing exactly as it was i mean ( relocking the boatloader installing stock rom etc.... ) and please with links
beacuse i only have like 1 week left before warranty ends and i need to restore it AFAP
many thanks in advance
You can install the stock ROM's from here. Then re-lock the bootloader (I think they can still see the bootloader was unlocked.)
Hope they don't notice that the bootloader was unlocked. :good:
iximedaixi said:
the case here is that my volume rocker and power buttons are a bit laggy that i some times have to click 5 or 6 times in order for them to work ... and my phone is still under warranty so i sent it to get repaired they told my they need to change the main board and that i broke the warranty terms by installing CM7 and unlocking boatloader and they told me also that if i could restore the phone exactly as it was they would repair it so please tell me how to restore every thing exactly as it was i mean ( relocking the boatloader installing stock rom etc.... ) and please with links
beacuse i only have like 1 week left before warranty ends and i need to restore it AFAP
many thanks in advance
Click to expand...
Click to collapse
s off OR unlocked bootloader?
if s off no way to return..i think..
if unlocked bootloader relock it by this http://forum.xda-developers.com/showthread.php?t=1712609
then download Any RUU then extract rom.zip
rename it to PG76IMG.zip
install it by bootloader
All stock roms http://forum.xda-developers.com/showthread.php?t=1335368
Hello everyone , im using HDH since a while , its a good smartphone generally, but today I just put an random PIN (numeric) 4digits , and suddenly after 2-3 hours forgot it , seems that my memory isn't that good , any solution please as soon as possible ?
drilOn. said:
Hello everyone , im using HDH since a while , its a good smartphone generally, but today I just put an random PIN (numeric) 4digits , and suddenly after 2-3 hours forgot it , seems that my memory isn't that good , any solution please as soon as possible ?
Click to expand...
Click to collapse
Any answer please :/
just call the provider they are your last help
Use the PUK code your provider has given you. If they had. Else you're out of luck...
Hi there
By PIN, you mean lockscreen passcode lock? In that case, you'll have to factory reset the phone. Boot into recovery and you'll be able to factory reset the device.
If you mean a SIM Card PIN, you'll have to contact your network provider, who will be able to provide you with a PUK code to unlock the SIM Card.
GuyInTheCorner said:
Hi there
By PIN, you mean lockscreen passcode lock? In that case, you'll have to factory reset the phone. Boot into recovery and you'll be able to factory reset the device.
If you mean a SIM Card PIN, you'll have to contact your network provider, who will be able to provide you with a PUK code to unlock the SIM Card.
Click to expand...
Click to collapse
Yes its lockscreen passcode lock, and the problem is that Volume Up / Down buttons doesnt work , seems that i need to get some cases then factory reset . Thank you
drilOn. said:
Yes its lockscreen passcode lock, and the problem is that Volume Up / Down buttons doesnt work , seems that i need to get some cases then factory reset . Thank you
Click to expand...
Click to collapse
Was usb debugging enabled?
"Two types of people: Those who buy iPhones; and those who are intelligent. I'm intelligent."
- Guy
connect the device to your pc and open adb type
adb reboot bootloader
3498BoyZ said:
connect the device to your pc and open adb type
adb reboot bootloader
Click to expand...
Click to collapse
Cant reboot , installed ADB on my windows 7 32bit and HTC Sync but it doesnt recognize my device,also when I type in cmd adb devices doesnt recognize my HDH , i dont know what to do :/
Your last hope is maybe a RUU
From HTC
Try poweroff while connection to PC instead of reboot. that usually puts me in recovery.
3498BoyZ said:
Your last hope is maybe a RUU
From HTC
Click to expand...
Click to collapse
What's a RUU ?
Searched for RUU and kinda understood what's that . So can anyone tell me how to do it please?
drilOn. said:
Searched for RUU and kinda understood what's that . So can anyone tell me how to do it please?
Click to expand...
Click to collapse
It's an executable. Run it from your computer.
drilOn. said:
Searched for RUU and kinda understood what's that . So can anyone tell me how to do it please?
Click to expand...
Click to collapse
First you'll need to find the correct RUU for your region and carrier. Then you'll have to relock your bootloader. To do this, simply boot into fastboot and use: oem lock to lock the bootloader. Now you should be able to run your chosen RUU
"Two types of people: Those who buy iPhones; and those who are intelligent. I'm intelligent."
- Guy
Yes a RUU will bring you in Stock version again
From HTC
Press and hold vol - when restart your DHD. It will reboot to bootloader, when in bootloader you can use Vol +/- to go to Recovery, wipe data, wipe cache and reboot. (If you have root and custom recovery (CWM or TWRP)
Hey i just tried get my OnePlus 3 completely stock but i dont know what happened now i dont have twrp and my bootloader is locked.I get fastboot mode but i cant flashing nothing because bootloader is locked and i cant open bootloader because i am not allowed developer settings oem unlocking setting.I reboot phone its just say your password its right but system corrupted you must be factory reset but i cant do that i dont have twrp it is my OnePlus 3 totally broken ?
Try with hard brick tool may be that will safe ur phone!
What i found that tool ?
Kerttuurius said:
What i found that tool ?
Click to expand...
Click to collapse
CLICK ME