Develop Bugs

is there screen lock software for xdaiis

is there any software to lock screen for blue angel? thanks

Yes there is...
I just found an excellent program called "ScreenLock". It turns the screen off and locks all the buttons. The only way to unlock the screen is to press button 1 and button 4 together (on the XDAIIs this is the Calender and messenging buttons) or do a soft reset. This program is perfect for listening to music and also save battery life too.
The cab file is attached below. Drag it to your device and run it from there.
Hope this helps.
Dom

Cheers for this!

xdadom - top app, thanks
HPJ

Yep, leapt straight in to my "must have" list.
Fantastic little tool!

The best thing I found to do was assign it a button like the "Record" button which I never used! You can then lock the screen with one touch.
Great when playing MP3s and beats paying loads of dosh for an iPod!
Dom

There's also MortSaver
Take a look at
http://tinyurl.com/3o725
Plenty of regular updates from the author, and highly configurable.
HTH
Mark

http://www.omegaone.com/pass/default.htm
http://www.trancreative.com/nicestart.aspx
Here is 2 more

Thanks XDADOM, works on XDA1 as well.

On my QTEK 9090:
START --> Settings --> System (folder) --> Button lock
No need of 3rd party software.
Joao Caldeira

button lock doesn't work if you want to keep on playing music.

problems with screenlock
Installed screenlock on my blue angel (SX66). When I launch it from the program panel, the screen goes black and then a moment later it flashes, the black then flashes. This continues until I manage to get a screen press in during the momentary flash at which time the screen then remains on and active. Not sure what is happening, anyone else see this or am I trying to use it incorrectly.
Thanks
David

is there anyway to change the unlock key(use other key except calender and message?) how?

I think they're the only keys that you can use. I expect that they are coded into the software itself.

on my imate
START --> Settings --> System (folder) --> Button lock
never the less, good aplication
tnx

Re: problems with screenlock
dtidmore said:
Installed screenlock on my blue angel (SX66). When I launch it from the program panel, the screen goes black and then a moment later it flashes, the black then flashes. This continues until I manage to get a screen press in during the momentary flash at which time the screen then remains on and active. Not sure what is happening, anyone else see this or am I trying to use it incorrectly.
Thanks
David
Click to expand...
Click to collapse
i think you might installed it the storage card. i have same experience as you when i first time install it, you should install it to the default directory.

psShutXP
Try psShutXP, excellent freeware with lot of functionality

Do you guys use media player for playing mp3s? Cause it's pretty damn easy to configure a button to toggle the screen off. And you can still keep your buttons free for song functions like previous, next or volume up/down.
Cheers

screen lock
can anyone tell me if this is necessary on the new updated rom on xda 2s o2?

Re: screen lock
usdiver said:
can anyone tell me if this is necessary on the new updated rom on xda 2s o2?
Click to expand...
Click to collapse
Yes it is.
And it will properbli stay this way at least until WM 2005

HTC Phone Lock (Transparent)

Hi All,
Does anyone know how to get this working on our beloved HD's? I hate the way the screen goes completely black during a call, we can't use the light sensor to tell the phone that the call has finished and it is away from your ear (so screen comes back on a la iphone), and i keep doing things during a call with my ear!!
So this seems like the ideal solution - but i can't get it to work!!
I've copied over the file to the windows folder, then soft reset. Changed the registry entry for phoneLockEnable to 1 in HKLM/Software/HTC/Phone but still no joy!
All help would be greatly appreciated.
Regards
DF

hi, where you found out this software? it look's great, can you share the link to me? recall i saw some post like this, but just for diamond, i'm looking one for my hd, is there anyone have?

chanmama said:
hi, where you found out this software? it look's great, can you share the link to me? recall i saw some post like this, but just for diamond, i'm looking one for my hd, is there anyone have?
Click to expand...
Click to collapse
Sorry, i don't have the cab file, i just saw the screenshot and thought 'that's what i need'!!!
Hopefully some bright spark here can help us both (and others probably).
Regards
DF

Beside this transparent canvas, where can I get the orginal canvas?
I am using a offical ROM but I don't see this function!

I hate the way the screen goes completely black during a call, we can't use the light sensor to tell the phone that the call has finished and it is away from your ear (so screen comes back on a la iphone), and i keep doing things during a call with my ear!!
Click to expand...
Click to collapse
that's interesting, because my screen doesn't go blank during calls and it happens quite often that i accidently disconnect a call (i suppose because i hit a button with my ear).
so in search for i solution i found in Advanced config a tab Light sensor > Light sensor polling which i set enabled. the explanation says "uses light sensor to automatically turn screen off when the phone come near from your ear to answer a call". so this should set it like the i-phone does, right?
hence when i tested it, the screen still was on, even when i put my thumb onto the light-sensor.
is this because i don't have a stock rom (i use Duttys HD V1.9b XTREME) or is there something i can do about it.
it would be really nice to have the screen locked when i answer a call and to outomatically unlock it if i remove it from my head to use some function on the screen..

take55 said:
that's interesting, because my screen doesn't go blank during calls and it happens quite often that i accidently disconnect a call (i suppose because i hit a button with my ear).
so in search for i solution i found in Advanced config a tab Light sensor > Light sensor polling which i set enabled. the explanation says "uses light sensor to automatically turn screen off when the phone come near from your ear to answer a call". so this should set it like the i-phone does, right?
hence when i tested it, the screen still was on, even when i put my thumb onto the light-sensor.
is this because i don't have a stock rom (i use Duttys HD V1.9b XTREME) or is there something i can do about it.
it would be really nice to have the screen locked when i answer a call and to outomatically unlock it if i remove it from my head to use some function on the screen..
Click to expand...
Click to collapse
Hi take55,
Yes, i'm aware of the advanced config tweak (also in HD Tweak), and as you correctly state, the screen should/will go blank on call connection (i'm running kwbr's A Touch Of HD 3.3.4 and mine doesn't, even with tweak applied!!).
Unfortunately, when the call ends and you move the phone away from your ear, the screen still stays blank????? I've read somewhere on these forums that it never will work like the iphone (not sure why, as the light sensor should recognise that we've moved the phone away from our ears).
So that is why i'm trying to get this other method to work. What i have noticed is that with the bmp copied over to the windows folder or with a cab i found by A-Math installed, my dialler locks up after every call (as if the transparent phone lock is in place) but i can't actually see it. None of the screen works and i have to soft reset. Maybe something is stopping the bmp to show on the phone....who knows.
It also might be the fact that this was designed for the Diamond (found the cab on the Diamond forums).
Just hoping some genius here might now how to sort this.
I've attached the cab file i've found, give it a try and see if you have the same issue as me.
Regards
DF

chanmama said:
hi, where you found out this software? it look's great, can you share the link to me? recall i saw some post like this, but just for diamond, i'm looking one for my hd, is there anyone have?
Click to expand...
Click to collapse
Hi chanmama,
Found the cab file for you, see previous post.
Regards
DF

Datafanatic said:
What i have noticed is that with the bmp copied over to the windows folder or with a cab i found by A-Math installed, my dialler locks up after every call (as if the transparent phone lock is in place) but i can't actually see it. None of the screen works and i have to soft reset. Maybe something is stopping the bmp to show on the phone....who knows.
Click to expand...
Click to collapse
It has nothing to do with the BMPs but with the registry setting that the CAB also makes. It sets HKLM\Software\HTC\Phone\PhoneLockEnable to 1, in wich case you'll have to press the power button to unock (no need to soft reset). For the BMP to work the phone/dialer software will have to support it, otherwise it just locks the phone in the usual way: black screen, power button to unlock.

Datafanatic said:
Hi chanmama,
Found the cab file for you, see previous post.
Regards
DF
Click to expand...
Click to collapse
tks but your cab only for the canvas skin only, do not contain the original software (slidable canvas), anyway, tks for your help

I've also found this problem to be quite annoying during a phone call but have found some sort of way to deal with it.
Firstly my ROM isn't tweaked, its just the basic one already installed.
After a call is connected, the screen switches off. But if you need to access the screen again during a call, I just press the "Back Arrow" key, one of the four hard buttons on the bottom which brings the screen back up again.
If you press the phone button instead whilst the screen is off, the screen lights up again but it puts the call on hold.
This probably isn't the best way to deal with this, but it seems to work for me for the time being, hope this helps anyone else here.

rubbermonkey123 said:
I've also found this problem to be quite annoying during a phone call but have found some sort of way to deal with it.
Firstly my ROM isn't tweaked, its just the basic one already installed.
After a call is connected, the screen switches off. But if you need to access the screen again during a call, I just press the "Back Arrow" key, one of the four hard buttons on the bottom which brings the screen back up again.
If you press the phone button instead whilst the screen is off, the screen lights up again but it puts the call on hold.
This probably isn't the best way to deal with this, but it seems to work for me for the time being, hope this helps anyone else here.
Click to expand...
Click to collapse
Useful info - I found this particularly annoying yesterday during a ouple of calls.
Also discovered Gyrator tries to turn the phone screen and was laggy - which was even more annoying!

Everyone!!!
CHECK THIS OUT - http://forum.xda-developers.com/showthread.php?t=489034
Answer to all our prayers - a screen lock which uses the g-sensor and not the light sensor.
Now, when a call is connected, holding the phone to the ear blacks the screen, but when you bring the phone down (to use the keypad or something), THE SCREEN COMES BACK ON!!!!!!!
Tried and tested on kwbr's A Touch Of HD v3.3.4 (probably the best manila2 ROM out there!)
Regards
DF

Tilt 2 freezing when locking phone...

Has anyone else had the problem with the Tilt 2 freezing when locking the phone? It doesn't happen all the time; but every so often, it freezes on me and I have to reset the phone to get it to work again. I haven't come across a solid answer for why it does this, so in the meantime I've reverted the locking mechanism to the Windows classic version, not the Windows default version that comes set on the phone. I do like the idea of the sliding unlocking mechanism, but I don't want to deal with the freezing. Is there a fix for this problem?

You are not the only one. I was wondering if it was S2U2.
I have been leaving my phone unplugged over night the past two nights to get a feel for the battery life. When I go to wake the phone in the morning it was either a blank screen or just the title bar before it froze. I had to reset to get the phone to work again.

thex said:
You are not the only one. I was wondering if it was S2U2.
I have been leaving my phone unplugged over night the past two nights to get a feel for the battery life. When I go to wake the phone in the morning it was either a blank screen or just the title bar before it froze. I had to reset to get the phone to work again.
Click to expand...
Click to collapse
I've had bad experiences with S2U2. I had installed S2U2 on my 8525, and I ended up having to do a hard reset. One day, after having to power down and restart the phone, it just wouldn't load. It got stuck in start-up mode. I don't plan to use S2U2 again. I'm not sure if the slide mechanism that comes standard with the Tilt 2 is related to S2U2 or not...

I am wondering if it is a conflict between the NEW WM lock slider and S2U2. I have a corporate exchange, so I have to use the PIN access.
I have the PIN set to appear in one hour if not in use. However, when using the WM slide locker, it ALWAYS reveals the PIN pad. If the PIN access did not appear after every WM slide locker, I would use it.
I changed the settings in for the WM lock to use the classic - thus eliminating the WM slide to unlock.
I will leave it OFF the charger tonight and let you know the results tomorrow.

Switching to WM Classic for the lock screen seems to work.
The screen did not freeze when I went to turn off the alarm this morning.
So the solution to use S2U2 is to change the Lock screen on your device from Default to Classic.

thex said:
Switching to WM Classic for the lock screen seems to work.
The screen did not freeze when I went to turn off the alarm this morning.
So the solution to use S2U2 is to change the Lock screen on your device from Default to Classic.
Click to expand...
Click to collapse
Thanks for the follow-up. Yeah, I've done the same thing: switched from default to classic. Thanks again.

Screen Unlock Freezes on Tilt 2
I too had this problem right out of the box. I switched to the Windows Classic as prescribed. However, this prompted me to get out the hand held drill and put a small hole right in the side of the back cover. I found myself having to battle the back cover every time I needed to soft reset, plus I noted the stylus needed to be removed to properly seat the back cover upon reinstall. Now I simply pull out my stylus and stick it in my hole. STOP IT!
Buzz
Formerly MDA / Wing / Tilt... and now Tilt 2
Always AT&T

Screen Unlock Freezes on Tilt 2
I just recently purchased the HTC Tilt 2 from AT&T on 02/15/2010 and for a few times I can successfully use the screen lock and unlock feature but then it stops working and I have to go press the soft reset button. This is constantly a problem now. When I try to go and unlock my phone it allows me to move the little lock icon to the left or right but the screen remains locked.
I appreciate the suggestions to dumb down to the Classic mode but this is not acceptable for a brand new device. I hope HTC comes out with a hotfix for this soon! We need to make this issue known to HTC so they can begin debugging immediately. Or do I have a defective phone and I need to return my phone?

southOCTilt2user said:
I just recently purchased the HTC Tilt 2 from AT&T on 02/15/2010 and for a few times I can successfully use the screen lock and unlock feature but then it stops working and I have to go press the soft reset button. This is constantly a problem now. When I try to go and unlock my phone it allows me to move the little lock icon to the left or right but the screen remains locked.
I appreciate the suggestions to dumb down to the Classic mode but this is not acceptable for a brand new device. I hope HTC comes out with a hotfix for this soon! We need to make this issue known to HTC so they can begin debugging immediately. Or do I have a defective phone and I need to return my phone?
Click to expand...
Click to collapse
I have seen a post similar to this pop up multiple times in the past month. This guy was specifically having problems with his mail client.
http://forum.xda-developers.com/showthread.php?t=634213
Personally I have only experienced this issue when the phone was next to my engine getting 400° temps blasted on it. Its hard to say the actual cause of the problem, but it seems in ideal situations (no 2000 e-mails or excessive heat) my phone is free of any freezing or strange behavior.
*edit*
also at the end of that post another user posted a work around that seems to be helping.

southOCTilt2user said:
I just recently purchased the HTC Tilt 2 from AT&T on 02/15/2010 and for a few times I can successfully use the screen lock and unlock feature but then it stops working and I have to go press the soft reset button. This is constantly a problem now. When I try to go and unlock my phone it allows me to move the little lock icon to the left or right but the screen remains locked.
I appreciate the suggestions to dumb down to the Classic mode but this is not acceptable for a brand new device. I hope HTC comes out with a hotfix for this soon! We need to make this issue known to HTC so they can begin debugging immediately. Or do I have a defective phone and I need to return my phone?
Click to expand...
Click to collapse
After returning my first HTC Tilt 2 phone and I got a second one, I got the same problem again.
I think I found the screen lock bug for the HTC Tilt 2 that I am able to reproduce. The problem is when I enable the Owner Information [Identification information or Notes] to display when the device is turned on and then try to slide the lock icon it will not unlock the phone.
HTC, please look into fixing this bug. Thanks!
Here are the steps to reproduce the problem:
1. Press the Windows logo start key (the second key on the bottom of your phone).
2. Choose Settings.
3. Choose Personal.
4. Choose Owner Information.
5. I populated everything on the Identification tab as well as a note to contact me on the Notes tab.
6. Choose the Options tab.
7. Check mark either the Identification information box or the Notes box.
8. Click OK
9. Now lock your phone by holding down the end call button.
10. Power off your phone.
11. Power on your phone.
12. Try to unlock your phone right away by sliding the lock all the way left or right.
13. You can slide the lock icon all you want but you will never get to unlock your phone.
14. You now need to soft reset your phone by taking the back cover off and using the stylus to press the side reset button. :-(
I hope this makes it into a downloadable bug fix. In the meantime, I have disabled (unchecked) any Owner Info notifications on device power up. I really miss having this on device power up as my old 7 year old Nokia phone was able to do that without a problem.

[Q] Primary shortcuts moved to side of screen

As the title says, somehow I moved the primary short cuts the ones at the bottom of the home screen to the side where they are stacked vertically. They are over lapping existing short cuts that can no longer be pressed without the primary being activated.
So the question is how did I do it, and how do I get it back to normal where they are at the bottom again?
I have looked around and I can not find any real answers so help would be appreciated.

Commcat said:
As the title says, somehow I moved the primary short cuts the ones at the bottom of the home screen to the side where they are stacked vertically. They are over lapping existing short cuts that can no longer be pressed without the primary being activated.
So the question is how did I do it, and how do I get it back to normal where they are at the bottom again?
I have looked around and I can not find any real answers so help would be appreciated.
Click to expand...
Click to collapse
You probably turned on one handed mode - adds home back and recents keys to the right side. Generally a toggle in the notification bar, or somewhere in the settings you will find it. I hit toggles all the time justpulling the phone out of my pocket...
Hope this helps.

panaderodc said:
You probably turned on one handed mode - adds home back and recents keys to the right side. Generally a toggle in the notification bar, or somewhere in the settings you will find it. I hit toggles all the time justpulling the phone out of my pocket...
Hope this helps.
Click to expand...
Click to collapse
No I am afraid that was not it as the ONLY thing that was changed was the location of those primary shortcuts. The rest of the phone and display worked normally. The one hand mode cause the keypad for dialing to shrink and shift to the desired side. When this happened the keypad was still normal.

When you say primary shortcuts, are you talking about the dock? Or home, back, recent keys? If the latter, there is a Side key panel setting in display settings - one handed operation which does that without shrinking anything. Posting a screen shot here may help us identify your issue

Commcat said:
No I am afraid that was not it as the ONLY thing that was changed was the location of those primary shortcuts. The rest of the phone and display worked normally. The one hand mode cause the keypad for dialing to shrink and shift to the desired side. When this happened the keypad was still normal.
Click to expand...
Click to collapse
I assumed you meant the menu back and home keys, on rereading perhaps you meant the dock. Did you figure it out yet?

panaderodc said:
I assumed you meant the menu back and home keys, on rereading perhaps you meant the dock. Did you figure it out yet?
Click to expand...
Click to collapse
Yes I meant the dock, and no I have not figured out how I did it. I am now thinking maybe my display just wigged out and it ended up that way. I was able to fix by enabling easy mode then turning it back to normal mode.

Unresponsive screen bottom

Thid weird issue started today in the morning, first I noticed that the clock widget had changed size, and that the led me know ring around the cam hole was out of place, but, when trying to write in whatsapp, I no longer could make the keyboard to appear by taping the wrinting field, in fact, nothing located in the bottom worked, what is odd, the bottom gestures worked, as I hid the nav bar since day one, tried everything, changed dpi, changed keyboards, retired the screen protector, wiped cache, to no avail, reluctantly, I updated to android 10, but no luck, after digging more, I found a work around, I changed the resolution from quad hd to full hd, now all is normal, but, this is just a work around, not a real solution, somebody have an idea of what would be the reason for this?

Did you have your phone linked to windows, your computer online and the phone screen displayed at that time? In this case, if you chose to use your computer's hardware keyboard in Your phone settings on your computer, then, when trying to write something in whatsapp, the virtual keyboard on your phone is not displayed or it is partially displayed. In my case, using the AI Type keyboard, only the top row of the keyboard was displayed because the app thought I'm using my computer's keyboard.
Sent from my SM-N975F using Tapatalk

Thanks for your reply, but no, in fact I have never used the phone in that way, something else caused the issue

winol said:
Thanks for your reply, but no, in fact I have never used the phone in that way, something else caused the issue
Click to expand...
Click to collapse
Was your phone charging at the time by any chance?

I found the solution!
I had the exact same problem with my note 10 plus, the gestures worked, and I tested the bottom part of the screen to make sure everything was working and it was, but the buttons in apps like instagram at the very bottom of the screen still were unresponsive most of the time. The solution is to ho to your settings, switch the navigation bar to the other gesture variant and then back to you preffered one and it should work. It worked for me.

Thanks man, I just found what triggers the issue, as odd as it seems, changing resolutions from qhd to fhd id what causes the issue, odd, because I used a bixby routine to save power at nights, by setting medium power saving, which among other things, lowered the screen resolution to fhd, when the routine ended, it should reverse to qhd, and that precisely triggered the issue, I used this routine for months, until, out of the blue, it started to cause this problem