Hi everyone,
I am trying to develop an application to run on this device and am having a few issues. I have no idea if it is actually possible to do these things or not so any help would be appreciated.
1 - disable the power button so the device cannot be turned off by the user
2 - re-program the hang up button so this goes to the app rather than the today screen
3 - program the IE button so this runs the app when pressed in tomtom rather than IE (i can get this to work anywhere else using the buttons icon in the settings menu but it persists in running IE when used when tomtom is in teh foreground)
Many thanks.
Related
hi guys,
i'm looking for a program for my sx66 that will allow me to lock the hardware keys and screen when i place it in it's holster. i have tried screenlock 1.2 and mortsaver but they don't seem to work.
anyone know of any programs that do this?
thanks!
try settings ->system ->button lock
it is already build into windows
Isn't that designed for only when the phone is turned off? I'd like to keep the phone on and lock the keys.
The phone will keep functioning with keylock on just lock the keys and give yourself a call from another phone , you'll see it works
Doh! Why didn't I think of that?
You are referring to toggling the keylock on from within the programs, not pressing the power button (which I assume does power the unit off), correct?
Thanks.
The power button does not power off the unit, it just turns off the screen or if you hold it for a few seconds, it turns off the backlight.
you may try Start->Settings->Personal->Password along with Button Lock in the System Settings. This will have your keys completly locked.
Thanks guys. That will do what I need.
I think that mortsaver is sort of a work in progress. There is a beta that works way better, but the only place I've found it is here not on any website:
http://www.pdaphonehome.com/forums/...0aa759&threadid=37160&perpage=20&pagenumber=1
'
You can get the latest beta from the last or second to last page, but you might want to read the entire thread to get an idea of how to use the program. I think it will soon be a killer app up there with pzp
hi folks,
every time I use tomtom for navigation and want to turn off the display to save battery power, after turning on again tomtom is closed.
the same happens to all other applications.
do you have any ideas why this happens? do you have the same problems?
greets
I am not seeing that behavior. If I hit the side power button briefly to cause the 3300 to go to sleep, once I hit it again, I am brought to the Today screen but TomTom is still running albeit not at first visible but I just have to hit either the tomtom hardware button or the icon in the taskbar.
Same applies for other applications that are running and I put the PPC to sleep.
Hi all,
Not sure what I need to change but at the moment, when watching videos, the backlight goes off after the specified amount of time in the settings menu. I am using S2u2 which then locks the phone.
I am sure this was not happening previously. Anyone know why the phone does not think it is being used whilst watching videos or how to fix it?
Thanks,
NiugeS
I had the same problem with IGO. What I did, I assigned the iLock application on the send button (hold the button) and that activate and disable S2U2.
So I hold the send button to disable S2U2 when I'm using IGO for a long period of time. When I don't need the GPS anymore, I hold again the send button and that reactivates S2U2... easy solution !
Hi,
I have a AT&T Tilt2 on which suddenly the volume rocker up button stop working as volume button and then brings me to the home screen from within any app!! I am unable to figure out why this would happen - its a stock AT&T ROM with some apps that I installed like - OperaBeta, HDWallS, Resco.
Even when I hold down the call drop button for sometime, the device does not lock! It vibrates but does nothing - just shows me the home screen.
Any idea on why this would happen ? has anyone seen this happen to their cell too ?
Thanks
Dhanvi
My volume buttons occasionally acts up too. They suddenly act as up and down keys rather than volume up and down keys. Very rarely though. A soft reset makes it go away each time.
...guess it was having an identity crisis...
I've been having problems with my volume buttons. And soft reseting doesn't solve the problem. The volume buttons work in the lock screen. But when i'm at the home screen they just open and close the volume screen.
I have a tilt 2 with the stock rom.
When I m eg in the Market or running Internet and press the Home Button I don t return to the home screen anymore. I must have changed something but don t now what.....
no ideas anyone?
Ideas about what?! You're not describing your problem. What happens when you press Home?
I only see the screen 'flicker' 1 time
Have you tried rebooting the phone? Is your phone rooted? Is it unlocked or branded? C'mon, give some more details if you want help!
You might try installing "Home Switcher" from the Market and see if it helps.
Rebooting does not help. Original 2.1 rom, installing home switcher does not help either. Did I clean install last night, home button worked fine for some hours and after this there s again the same problem => no returning to the home screen and only a short 'screen flicker' when pressing the home button.
I would speak to HTC if that did not work. They should repair it for free because its under warranty.
It's unlikely to be a hardware issue if it sometimes works.
When using Home Switcher, what apps show up in the list? (might be a rogue app that is stealing the home button function by registering itself as a launcher application).
Do you have any apps installed? (you said you have done a clean install but it's not clear if you installed any apps after that; please note that you might have enabled backup to your sd card [Settings -> Privacy] and that even after a clean install some of your settings will he restored from that backup).
sanderh said:
Rebooting does not help. Original 2.1 rom, installing home switcher does not help either. Did I clean install last night, home button worked fine for some hours and after this there s again the same problem => no returning to the home screen and only a short 'screen flicker' when pressing the home button.
Click to expand...
Click to collapse
I'd suggest booting into safe mode as this will stop all 3rd party applications from running. If it works from there, it seems pretty likely that the issue is related to an application you have installed.
To get into safe mode, power off your device, and then power back up again whilst holding down the menu button, and keep it held down until the phone has completely booted. Once booted, you should find it says "safe mode" in the bottom left corner of the screen.
Note that if you do this, all your 3rd party widgets on the home screens will stop functioning - even when you have exited safe mode. You will need to delete and re-add them.
Regards,
Dave
foxmeister said:
I'd suggest booting into safe mode as this will stop all 3rd party applications from running. If it works from there, it seems pretty likely that the issue is related to an application you have installed.
Click to expand...
Click to collapse
Very good idea/advise.
This worked for me
Reading through this thread made me wonder whether the fact my Home and Search buttons suddenly weren't working could have been caused by an app I installed the day before (No Lock).
Before uninstalling it I decided to give it a test. It was on "Locking Disabled". I set to "Locking Enabled" and tested the Home button - voilĂ , it worked. Tested the Search button, it worked too.
Set the app back to "Locking Disabled" - Home and Search buttons still working.
My buttons, home and both volume buttons are dying. I think it's just wear and tear really which is bad because I've had it less than a year.