Related
I'm having several problems with my Qtek 9090
There's a rather loud constant high-pitched noise comming from the screen whenever it is turned on (which is when the device is on!). At first I though it was comming from the speaker, but the screen is definitely the source of the noise. It doesn't matter if the backlight is on or off.
People can't hear what I say when using the phone - it makes no difference whether I use the included headphones or just speak directly into the microphone.
I haven't been able to find a BT headset that works with it. They all have the same problem; The sound scratch so much they're unusable. I tried 3 different brands that all works well with my 2020!
The GSM link often "falls out" - even though there's plenty of link the phone doesn't work (nothing happens when I try to call someone). A soft reset solves this problem!
As you can see, I can hardly use the device as a phone at all I've had the device replaced once, but all the problems persists on the replacement.
Does anyone have similar problems?
1. No, don't have this problem. Strange that it happened on the replacement too.
2. Yes.
3. I have just ordered a jabra headset in the hope it will fix problem#2.
4. Yes.
These problems with GSM are a real headache. One of the primary reasons for buying the PDA2k was to consolidate my mobile into one device. I have seen other people experiencing such problems but from what I could gather, voice over BT worked much better. Have you updated the ROM since you bought it? I should know the answer to 3 today, if DHL delivers, and I can tell you I will not be a happy man if the answer is Yes!
Try a Motorola HS810 headset... works fine for me.
harry_mb said:
1. No, don't have this problem. Strange that it happened on the replacement too.
2. Yes.
3. I have just ordered a jabra headset in the hope it will fix problem#2.
4. Yes.
These problems with GSM are a real headache. One of the primary reasons for buying the PDA2k was to consolidate my mobile into one device. I have seen other people experiencing such problems but from what I could gather, voice over BT worked much better. Have you updated the ROM since you bought it? I should know the answer to 3 today, if DHL delivers, and I can tell you I will not be a happy man if the answer is Yes!
Click to expand...
Click to collapse
I've already tried Jabra Freespeak 250, which didn't work for me
No I haven't updated the ROM as I've been told by the supplier that no new version is available yet!
outz said:
Try a Motorola HS810 headset... works fine for me.
Click to expand...
Click to collapse
I also tried both a Motorola and a SonyEricsson BT headset, but I don't remember the specific models - they both scratched immensely
i use SE 60 and it works ok
As you said, the Jabra250 is pretty much unusable!
Crackling is not constant but goes in waves, even though I do not move.
Am at a bit of a loss what to do now... the device is great apart from this.
>> People can't hear what I say when using the phone - it makes no difference whether I use the included headphones or just speak directly into the microphone
yes PBT read my other post
I have the same problem!!
it is scandalous to sel an device with this big defect!!
Sony HBH-660 works good for me.
People say that they can't hear me when I use the handset, but I don't have any crackling, etc with the headset and voice is clear. You just never know if the headset is going to connect when the phone rings though.
sound from screen
there's a rather loud constant high-pitched noise comming from the screen whenever it is turned on (which is when the device is on!). At first I though it was comming from the speaker, but the screen is definitely the source of the noise. It doesn't matter if the backlight is on or off
Click to expand...
Click to collapse
I have this problem also, I was told to use the new rom but this has made no difference, Please let me know if you have found a solution
[/quote]
Guys,
the hissing coming from the screen is a power supply problem. keep swapping phones until it goes away! I used to build switching power supply and the hissing (in a system designed to operate well above 20kHz) is only able to be heared when unstable, inductor core or cap is broken. The hissing is very 'not normal'.
It appears that the Q9090 is standing out as having more problems than the MDAIII, one is the mic volume, most of the other phones are not complaining about this so there may be something with they way the Q9090 are updated or shipped.
With the Jabra 250, don't forget to pair it pressing BOTH the volume and phone button on the headset on discovery with the 9090.(On bonding, turn off headset, turn on again pressing both buttons)
Funny thing is, I had the cracking also. I deleted the headset in BT manager and paired it again as described above. Now it works ok.
Hi,
I bought a Qtek 9090 a few days ago and I also have the same problem with volume level. People can't hear me when speaking, either with the headset or base microphone.
Using a different headset doesn't help (that's even worse sometimes) but I didn't try a BT heaset (and I don't want to as it would raise potential connection problems). I'm going to contact Qtek for support on this...
Pierre
I too am having problems with the Jabra 250 BT headset and my SPV M2000. The Jabra 250 worked fine on the XDAII but is terribly crackly on the newer model.
This is even when pairing it with the enhanced pairing of pressing Volume Up and Phone button together to pair.
Any ideas?
qtek 9090 bluetooth problem
Hi All,
I have new qtek9090 with cellink bluetooth headset. It is work normal, but i am loosing connection to headset each time qtek go to stand by mode. I need to switch off/on the bluetooth in order to restore the connection. Any ideas?
I often get a message stating:
"The Bluetooth Radio failed to turn ON due to insufficient driver momory available. You must perform a normal reset before you can turn ON the Bluetooth Radio."
Does your device also give you this message?
Is it also using the Broadcom "Bluetooth for Windows CE BT-PPC/PE Version 1.0.0 Build 2200"?
Interested to know if you have the same problems with the same bluetooth driver.
same problem
My qtek 9090 shows te same problem
This is a known problem with the Blue Angel, unfortunately, until they bring out a fix, all you can do is a soft reset.
upgrade
hi all,
how can i get updates from www.imateclub.com?
I can't register there, because I have qtek 9090 and not i-mate
thanks
O2 Sourced info on which BT headsets work
See: http://www.my-xda.com/downloads/Other_Bluetooth.pdf
I have tried about 4 different programs that used to work with WM5, but nothing routes the audio properly. Is this a known issue? I read through most of the WM6 threads and saw a lot about VC 1.6, but nothing about this specifically. I like to route mono sound to my bluetooth to listen to music while i work, but now, I load up any bluetooth routing program and my headset beeps like it used to, but the sound still plays out of the speakers. Any help?
Have you tried using Bluemusic http://www.teksoftco.com/index.php?section=bluemusic.
I installed the demo, removed the today plugin and now when I press the button on my bluetooth headset (Jabra JX10) all audio and mic is routed to the headset until I press the button again. I've used it on Skype, and for listening to music.
the only thing you need is to install the widcomm/broadcom bluetooth stack and it will work like a charm!!
and, the soundquality will be MUCH better!
cybertron said:
the only thing you need is to install the widcomm/broadcom bluetooth stack and it will work like a charm!!
and, the soundquality will be MUCH better!
Click to expand...
Click to collapse
can you quick link me for this? If I can't get this fixed i'm contemplating going back to WM5 until more bugs get ironed out cuz this is a biggy for me.
And YES i've searched for this...but if its that easy to find by search obviously i'm missing something...please help!
DeniaL said:
And YES i've searched for this...but if its that easy to find by search obviously i'm missing something...please help!
Click to expand...
Click to collapse
Rrrrrrright ...
HKLM\Software\OEM\VoiceCommand "LaunchApEnable",0
HKLM\Software\OEM\VoiceCommand "VoiceCmdDuration",86400
VJVolubilis.exe -agon
Worx like a charm for me.
Of course to the extent of how crappy s/w running on a crappy h/w can :-(
can someone explain to me on this issue how it works that on certain devices i guess that are designed for hands-free talking only route audio from a phone call rather than all audio as with for example bluetooth speakers one can find. i'm in the market for some bluetooth speakers for my car and i'm wondering how some of these speaker phone devices may work but i gotta understand how these things work first. thanks. feel free to get technical with me. use high-tech achronyms and such. i wanna learn.
http://en.wikipedia.org/wiki/Bluetooth_profile
main ones u need to look at are a2dp and hsp
thanks a lot.
I know you're supposed to make this change in a RegEdit program, but what is this VJVolubilis.exe -agon part about. Is that a program we're supposed to download?
Hi all
As this is my first post I just want to say a big thankyou for all the contributers to this site, awesome information and keep up the good work.
I have been running Black Majik on my M3100 for a week or so now and have been really impressed. the only slightly annoying problem I have is with my BT Stereo headset (HTC BH S100) which I have had only a couple of days.
Listening to music and controlling the media player(s) (Audio Manager and WMP) is fine, the problem I get is answering/initiating calls from the headset. After a reboot of the phone, the headset works OK for both music and calls, but after turning the headset off/on, the call handling functions don't work although wireless stereo does - its as though the phone loses the headset profile but not wireless stero. Stopping/Starting the BT stack from comm manger seems to reinstate the headset functions but this is frustrating!
I have searched multiple forums but have not found anything of use yet!!
Does anyone have any ideas
Thanks in advance
M.
+1
same problem
please help us
Up ... Same WM6 version, same problem ... with a Nokia BT Headset, and a Sony Ericsson too ...
Thank you.
guess i have a worse problem then. cant hear my phone ring from my BT HS. not that ive tried to figure it out. i can live without listening to music. but it would be interesting to know how everyone is able to hear their phone ring from their headsets. im thinking its because of my headset. i have a moto hs810. does anybody concur?
merlynuk said:
Hi all
........
After a reboot of the phone, the headset works OK for both music and calls, but after turning the headset off/on, the call handling functions don't work although wireless stereo does - its as though the phone loses the headset profile but not wireless stero. Stopping/Starting the BT stack from comm manger seems to reinstate the headset functions but this is frustrating!
..........
M.
Click to expand...
Click to collapse
I have the same problem and I've tried a P3600 and kaiser and the same problem.
As merlynuk wrote the problem seem that the HD lose a free hand function of it profile and only a reset and sometime a pairng od device solve it.
It's for me important to use this function in car or call a voice command but the MTB button seem not work.
bought this HD because belived it would be perfect with a HTC PDA but it's not really.
Do you have some suggestion ?
Do you believe it's better to sell this HD and to buy another ?
Someone know a HD device thet work perfectly as free hand and function as a call, a start a vocal command etc etc work fine ?
Regards
aladino
got the same problem: bought the HTC BH S100 after my touch cruise cause I thought to have no problem with vocal commands, but it doesn't work. music, player control, phone and pairing are perfect but no vocal dialling..
how can we solve this??
Yesterdaty I updated to WM6.5 and now try to get everything working again. Somehow my TP2 won't pair with my bluetooth carkit anymore. With WM6.1 this was no problem. The phone still pairs perfectly with my computer (also bluetooth connection) so I think the bluetooth connection is ok.
When parining to my carkit it finds the device, then I have to enter a password on the TP2, and after that it just sais "pairing connection failed", and it will not work. I am sure the password is not changed since yesterday. I tried it several times. I do not know what to do anymore. Could this be a setting somewhere? I get the feeling my password is not send properly but have no idea.
Meanwhile I tried pairing my carkit with another phone and no problems there. So my conclusion is: something has changed with bluetooth, updating to WM6.5 which makes it now impossible to pair my TP2 with my carkit.
Is there maybe a programm for the TP2 which give me more controll over bluetooth (like maybe go to an older standard)?
I have exactly the same problem as you
good to hear I am not the only one. Hope someone will come up with a solution for this.
I did nor observed any issues when pairing my TP2 after reflashing to WM6.5
There is another issue however - I can not hear any voice until it is charging.
Unplugging of the charger fixes this issue immediately. Horrible...
Seems, HTC guys are saving money on testing by using us as Beta Customers.
Would a custom ROM be a solution for us?
I updated to the "energy 6.5.1 rom" and guess what..............
The same problem. The rom is very nice, but my TP2 still won't pair with my BT carkit which is very big problem for me.
Is there maybe a way to downgrade just the BT part of a rom to WM6.1. I read on different forums there is something that is called a BT stack. Could this be the problem?
I have a ton of problems with bluetooth pairing now. However, I don't know whether it's the fault of 6.5 or the Tilt 2. Here is what I am experiencing...
- On car deck or headphones, the skip buttons don't do anything
- on car deck or headphones, I have to disconnect Stereo Audio and then reconnect to actually get sound. It NEVER works when it auto connects.
- Music will do a brief skip when you shut the screen off
- Stupid message about volume control every time it connects (resolved by switching to custom rom)
- SMS or any kind of alert tone now turns music way down so that the tone is the only thing you hear. Which is super awesome when I'm driving my drunk friends around and they are singing along to a song when suddenly it mutes so everyone can hear my incoming text message.
Not a single one of these issues existed when I had my Fuze.
Same here
My bt headset (sony hbh ds970) and simply does not find the pairing...
I asume is a problem related to energy´s ROM
orb3000 said:
Same here
My bt headset (sony hbh ds970) and simply does not find the pairing...
I asume is a problem related to energy´s ROM
Click to expand...
Click to collapse
No I do not think so, because I used the official WM6.5 with the same problem. Does someone know a way around this issue. I strongly believe that if only I could pair I have some options to work with it (in 6.1 it worked like a charm). If I only could pair without having to send the passkey it would be great step forward. I presume with sending the passkey, the bluetooth of the TP2 sends out other "rubbish" that confuses my carkit.
My problem is solved and guess what, it had nothing to do with my TP2. The problem was my carkit. It has a maximum number of bluetooth devices (5) it can pair to and the last one (the WM6.1 version of my phone) had been reached. So a hard reset on the bluetooth carkit and the problem was solved.
Well, at least I now know how to flash a rom to my phone and I think I learned more about the phone reading through all the forums. Thanks all for thinking with me on this problem!
Does anyone else still have this problem?? I have removed all the devices from my car and continue to have the same pairing error just after entering the passcode. Stock Spint ROM worked great, but multiple 6.5 upgrades don"t pair..............suggestions/ideas??????
bluetooth settings, advanced, enable beam data exchange,check the box
Interesting.....I actually found a fix. Instead of pairing the phone with the car, I paired the car with the phone. I didn't even know that this was possible, but it did the trick!
Hello.
I have installed Cyanogenmod 11 on my HOX.
although everything looks to be working fine, I still have issues with my Bluetooth.
When driving in my car, and want to place a call, I used to be able to use Cyberon Voice Commander to place the call.
It still works when i use it on my phone without Bluetooth, but when I am connected to my car everything stays silent.
It worked with stock firmware, and I can recieve calls using bluetooth, and I also can use the car stereo to play music from my phone,
but just making a call with the Voice commander does not work.
Does anyone have similar experiences with this, or does anyone have a solution?
Search the thread, been mentioned a lot there !
Hello,
I have been searching, and also looked in the thread for the HTC (HTC One X CyanogenMod 11.0 nightlies, http://http://forum.xda-developers.com/showthread.php?t=2583037) but I could not find an issue which is matching my problem.
Unfortunately I am (yet) not able to post this issue in the HTC One Cyagenomod thread...
I don't own a BT headset so I can't properly debug the issue. I know that a lot of people complain about it but there is not much I can do unless they actively try to help. You could provide logs when pairing the device, turning it on and when doing a call.
I might by a BT headset in the future. So there is hope .
Hello,
I was not sure which logfiles you wanted, so I grabbed the output from dmegs and made a logcat and put it in a zip fie.
Here they are.
Thanks for your effort, though.
Thanks for the logs.
Can you describe the behaviour a bit more? What exactly does not work? Imitating the call through Bluetooth, hearing your partner through Bluetooth or recording through Bluetooth. And can you test other apps for me. Like Skype or the normal phone without cyberon.
Do you know if your car is recognized as a normal handsfree Bluetooth device or something special? If you happen to know it.
Also some apps (like Google Now) need to be told to use BT devices.
Hello,
Bluetooth itself is working normally, I can use it to play music on my car's stereo, and when I recieve a call it works fine, I can hear the other party, and they can hear me.
It's just when I want to make a call, I can see Cyberon Voice commander starting up, but I don't hear any sound, and it also does not respond on voice commands.
When I disable Bluetooth, the app works normal.
On stock HTC rom, the app also works fine.
I own a Ford Focus 2011, and it shows up in bluetooth as Ford Audio.
The profiles active are audio for telephone and audio for media (sorry, translated from dutch).
The default Voice Dialer at least I can hear on my headset, haven't tried in the car yet with this version of Cyanogenmod.
It does not seem to respond to the micophone though.
The previous version of Cyagenomod would also not play over my car speakers.
Will try again when I get back home, did not use my car today.
Please test tomorrows nightly. I fixed some issues and I think they address your problems.
Try this Kernel http://forum.xda-developers.com/showthread.php?t=2586808 On the latest Version is a fix for BT maybe it helps
Hello,
just tried to test the "Voice dialer" through my car stereo, I can hardly hear it, and it does not recognize anything I say.
At least not in a way it would be useful for me
With tomorrows version you mean CM-11-20140314-Nightly, or the one after that?
Could not see anything about Bluetooth in the changelog, but I'll wait for the next version.
Will report back.
charly_s said:
Hello,
just tried to test the "Voice dialer" through my car stereo, I can hardly hear it, and it does not recognize anything I say.
At least not in a way it would be useful for me
Click to expand...
Click to collapse
With the other kernel? You probably already had the BT fix when using the CM kernel.
charly_s said:
With tomorrows version you mean CM-11-20140314-Nightly, or the one after that?
Could not see anything about Bluetooth in the changelog, but I'll wait for the next version.
Will report back.
Click to expand...
Click to collapse
Yes, 20140314, see line 6.
http://www.cmxlog.com/11/endeavoru#cm-11-20140314-NIGHTLY-endeavoru.zip
Hello,
I tested it with yesterday Nighties, and it's working now.
Cyberon Voice Commander could now be used with the Car bluetooth set.
Thank you for solving this.
I hope the logs I uploaded were of any use.
btw, I did take a look at the change log, and the line "tegra3-common: system/audio.h: Use correct DEVICE_BIT_IN bits" didn't ring any bells in my head in combination with Bluetooth.
Anyway, it is solved for me (and maybe for several others as well), so I want to express my gratitude by saying: Thank you very much:highfive:.