Related
I just found a Cheinese Rom in the FTP, and using the "MaUpgradeUt_noID" it seems can detect my rom version, but i did not continue because i can not afford to "Fail", DID anyone know how to upgrade my english ROM to chinese???
HELP!!!!!!!!!!!!!!!
ericcc said:
I just found a Cheinese Rom in the FTP, and using the "MaUpgradeUt_noID" it seems can detect my rom version, but i did not continue because i can not afford to "Fail", DID anyone know how to upgrade my english ROM to chinese???
HELP!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
should be no problem for that , you can look at FTP again there had new ROM 11336_11334_10402 that's same as I had Dopod 900 , I already try to flush WEE i-mate ROM and flush back Dopod ROM twice no problem for flush ,
how can you upgrade it? need to enter serial mode? ( how to enter for universal) what tool did you use?
thx
ericcc said:
how can you upgrade it? need to enter serial mode? ( how to enter for universal) what tool did you use?
thx
Click to expand...
Click to collapse
See here maybe help http://wiki.xda-developers.com/index.php?pagename=Universal_Technical
I did the upgrade from Jasjar WWE to Dopod CHT. Here is how I did it:
1. Connect JJ to ActiveSync thru USB and wait till the sync session is completed.
2. While the sync is still active, I ran MaUpgradeUt_noID.exe. After a few steps of checking, it will disconnect ActiveSync and put the JJ into the bootloader mode.
3. The upgrade will halt with a country code error. No upgrade has been performed yet.
4. Run MaUpgradeUt_noID.exe again while the cable is still connected and JJ still in bootloader mode. I was prompted that I am upgrading from [Blank] to [NewVersionNumber]. Click "Next".
5. The ROM will be upgraded this time till it's done. It took about 20 minutes.
6. I pressed both softkeys and reset. When the reset prompt comes up, I pressed "0" to reset to default factory settings. After some booting time, JJ starts to speak Chinese.
I upgraded to Chinese ROM because the Chinese plug-in I used to use for English ROM is kind of buggy on WM5. Thanks to everyone on this forum.
There are a few things I did after I upgraded to CHT ROM:
1. Changed the system font to the more artistic Kai font (from KAIU.ttf on a Windows machine). The original system font was MingLiU, which looked kind of scrawny on a VGA screen.
2. Re-enabled ClearType for the system and PIE. For some reason, Dopod disabled ClearType settings so the user cannot turn on ClearType from the user interface. I used a registry editor and modified a few keys to get the ClearType feature back.
With the Kai font and ClearType, the screen becomes a lot more readable and very pretty! If someone is interested in step-by-step instructions, let me know, and I will post them.
By the way, I was so excited when I discovered the im.tv site actually works for me in USA. I was able to watch the TV news in Taiwan in full VGA screen.
One difference I noticed is that with the WWE ROM, I can very easily set up Bluetooth ActiveSync. With the CHT ROM, the device can only discover the serial port service on my computer, but not recognize its ActiveSync capability. If someone knows how to correct this, please let me know.
Also, in case you don't know, the keyboard mappings between WWE and CHT ROMs are slightly different. The SYM key is swapped with the ";" character, probably because SYM is hardly used in Chinese input. The shortcut "FN + ;" can toggle the English and Bomopofo modes. Note the ";" character is now on the SYM key of JASJAR.
yyl said:
There are a few things I did after I upgraded to CHT ROM:
1. Changed the system font to the more artistic Kai font (from KAIU.ttf on a Windows machine). The original system font was MingLiU, which looked kind of scrawny on a VGA screen.
Click to expand...
Click to collapse
Hi yyl :
Can you tell me how to change system front to Kai ?
Thanks
1. Copy KAIU.ttf from a Windows machine. Paste it into the Pocket PC's "Windows" directory thru ActiveSync.
2. Using a registry editor (like PHM RegEdit), BACK UP your registry first! Then go to "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\FontLink\SystemLink\". Change the data of "Courier New" and "Tahoma" keys to "\windows\KAIU.ttf,DFKai-SB".
3. Soft-reset your device. Now all the Chinese characters become Kai font. It is not very smooth, because ClearType is still disabled.
4. To enable ClearType, this is how I did it. Maybe some steps are not really necessary.
5. Using the same registry editor, search for the keyword "cleartype" in all the keys and values. I found three matches. I set ClearType=1, NoClearType=0, ClearTypeText=1 respectively.
6. Soft-reset your device. You will see that the system ClearType is still disabled. Go to "Settings -> System -> Screen -> ClearType" to enable ClearType. This option was originally hidden from end users. Now it's visible. Once you check the "Enable ClearType" box, the font will immediately smooth up.
That's it. One thing worthy of note is, KAIU.ttf seems to only have traditional Chinese characters, not simplied Chinese. I am not sure.
Thanks yyl , I will try it today
yyl said:
I did the upgrade from Jasjar WWE to Dopod CHT. Here is how I did it:
1. Connect JJ to ActiveSync thru USB and wait till the sync session is completed.
2. While the sync is still active, I ran MaUpgradeUt_noID.exe. After a few steps of checking, it will disconnect ActiveSync and put the JJ into the bootloader mode.
3. The upgrade will halt with a country code error. No upgrade has been performed yet.
4. Run MaUpgradeUt_noID.exe again while the cable is still connected and JJ still in bootloader mode. I was prompted that I am upgrading from [Blank] to [NewVersionNumber]. Click "Next".
5. The ROM will be upgraded this time till it's done. It took about 20 minutes.
6. I pressed both softkeys and reset. When the reset prompt comes up, I pressed "0" to reset to default factory settings. After some booting time, JJ starts to speak Chinese.
I upgraded to Chinese ROM because the Chinese plug-in I used to use for English ROM is kind of buggy on WM5. Thanks to everyone on this forum.
Click to expand...
Click to collapse
Can anyone give me more detailed information about how to use MaUpgradeUt_noID.exe? When I run it, I get an error message: "This application has failed to start because RUU.dll was not found. Re-installing the application may fix this problem", any help will be appreciated! I'm trying to update my Jasjar to CHT ROM.
yyl said:
I did the upgrade from Jasjar WWE to Dopod CHT. Here is how I did it:
1. Connect JJ to ActiveSync thru USB and wait till the sync session is completed.
2. While the sync is still active, I ran MaUpgradeUt_noID.exe. After a few steps of checking, it will disconnect ActiveSync and put the JJ into the bootloader mode.
3. The upgrade will halt with a country code error. No upgrade has been performed yet.
4. Run MaUpgradeUt_noID.exe again while the cable is still connected and JJ still in bootloader mode. I was prompted that I am upgrading from [Blank] to [NewVersionNumber]. Click "Next".
5. The ROM will be upgraded this time till it's done. It took about 20 minutes.
6. I pressed both softkeys and reset. When the reset prompt comes up, I pressed "0" to reset to default factory settings. After some booting time, JJ starts to speak Chinese.
I upgraded to Chinese ROM because the Chinese plug-in I used to use for English ROM is kind of buggy on WM5. Thanks to everyone on this forum.
Click to expand...
Click to collapse
Can you give me more detailed instruction about how to use MaUpgradeUt_noID.exe? Every time I run it, I get an error message as follows: "This application has failed to start because RUU.dll was not found. Re-installing the application may fix this problem."
yyl said:
I did the upgrade from Jasjar WWE to Dopod CHT. Here is how I did it:
1. Connect JJ to ActiveSync thru USB and wait till the sync session is completed.
2. While the sync is still active, I ran MaUpgradeUt_noID.exe. After a few steps of checking, it will disconnect ActiveSync and put the JJ into the bootloader mode.
3. The upgrade will halt with a country code error. No upgrade has been performed yet.
4. Run MaUpgradeUt_noID.exe again while the cable is still connected and JJ still in bootloader mode. I was prompted that I am upgrading from [Blank] to [NewVersionNumber]. Click "Next".
5. The ROM will be upgraded this time till it's done. It took about 20 minutes.
6. I pressed both softkeys and reset. When the reset prompt comes up, I pressed "0" to reset to default factory settings. After some booting time, JJ starts to speak Chinese.
I upgraded to Chinese ROM because the Chinese plug-in I used to use for English ROM is kind of buggy on WM5. Thanks to everyone on this forum.
Click to expand...
Click to collapse
Thanks! I am Upgrading my ROM now, May the God bless me!
Upgrade Success! thx everyone's help!
yyl :
Can you upload KAIU.ttf which I can't find in my window machine, Are you used Chiese window system ? mine was English + language pack
The KAIU.ttf comes with many versions of Microsoft Office of many languages. When the Asian character support is selected during installation, Office will install some extra Asian fonts for you. This is one of them.
Anyway, I uploaded this font to ftp://xdaupload:[email protected]/Universal
I don't know if this upload is appropriate. If it is not, the board moderators, please feel free to delete it. Thanks.
The principles that I outlined above should work with any TrueType Chinese font that you like.
johnney said:
Can you give me more detailed instruction about how to use MaUpgradeUt_noID.exe? Every time I run it, I get an error message as follows: "This application has failed to start because RUU.dll was not found. Re-installing the application may fix this problem."
Click to expand...
Click to collapse
Download "(Open_ch)UNI_DOPOD_11336_134_10402_Test.exe" from the "Universal" folder of this site (see the link in my previous post). Use Winzip to extract all the content from this EXE file into a folder on your hard drive. Place "MaUpgradeUt_noID.exe" into the same folder. Then perform the steps I mentioned above.
I have Modify the font to KAIU , But it does not suppurt Simpfy Chinese, it only support tradition chinese, does any font will fit Both?
I did it!
yyl said:
johnney said:
Can you give me more detailed instruction about how to use MaUpgradeUt_noID.exe? Every time I run it, I get an error message as follows: "This application has failed to start because RUU.dll was not found. Re-installing the application may fix this problem."
Click to expand...
Click to collapse
Download "(Open_ch)UNI_DOPOD_11336_134_10402_Test.exe" from the "Universal" folder of this site (see the link in my previous post). Use Winzip to extract all the content from this EXE file into a folder on your hard drive. Place "MaUpgradeUt_noID.exe" into the same folder. Then perform the steps I mentioned above.
Click to expand...
Click to collapse
Thanks for your help! Now I did it! My mistake was that I copyed the whole exe file to the folder!
Do you guys have Wisbar Advance 2 installed? How's it work? It really slowed my system down on my previouse english ROM.
Re: I did it!
johnney said:
Thanks for your help! Now I did it! My mistake was that I copyed the whole exe file to the folder!
Do you guys have Wisbar Advance 2 installed? How's it work? It really slowed my system down on my previouse english ROM.
Click to expand...
Click to collapse
I use Magic Button to "truly" close applications. It also shows battery meter and the icons of currently running apps.
ericcc said:
I have Modify the font to KAIU , But it does not suppurt Simpfy Chinese, it only support tradition chinese, does any font will fit Both?
Click to expand...
Click to collapse
Yes, as I mentioned in one of my previous posts, KAIU.ttf seems to include only traditional Chinese. The MingLiU font that came with the Dopod ROM has both traditional and simplified. I presume there are many third-party fonts on the market that support both. Note that fonts supporting both styles tend to occupy a lot more space.
:?:
:arrow: How can I get into the bootloader of the Treo 700w? What is the exact key sequence?
Thank you in advance!
(p.s. I also posted this in the "Development and Hacking" forum)
#*#UPST is how to get into the bootloader.
My question is, what tools are there for reprogamming?? I have an unlocked Treo 700 that's been activated in Canada.
The cell phone part is working but data is not. In the SETTINGS, ABOUT menu, it shows DATA USER NAME as [email protected]. How do I change that???
Thanks a bunch...later.
I have the same problem please help not working data how cant reprogramming??
700w problem
Cann't enter to boot loader using #*#...
My treo halt after windows started up.
Hard reset not helps.
Windows started and after few seconds it not reacts on touchscreen & keys.
Sync also disconnected, but while pressed hotsync key it play sound, or see blinking cursor if i had time to begin edit anything.
CJEWingnut said:
#*#UPST is how to get into the bootloader.
My question is, what tools are there for reprogamming?? I have an unlocked Treo 700 that's been activated in Canada.
The cell phone part is working but data is not. In the SETTINGS, ABOUT menu, it shows DATA USER NAME as [email protected]. How do I change that???
Thanks a bunch...later.
Click to expand...
Click to collapse
surely this can be changed in ur connections settings panel eh?
...To
To get into bootloader mode you can also hold down the Multimedia button (button on side below the volume button) and press reset.
To program your data you can do ##3282# and edit from there.
Or if you can find a serial cable for it ( made one) you can used QPST.
First option should be easier for you.
The code is for sprint phone. For verizon I think it's #*#3282 + Send key. Hope it helps
please sir iam a new bie .my treo 700w stuck on treo logo, how to fix and get my phone back
Hello, I have tried all methods to get access to my bootloader on my New Zealand (Telecom) Treo 700wx but nothing gives.
It perhaps does not have a boot loader? is this possible because it just seems nothing no1 has suggested will work at all. I have tried all that I could find but no avail.
Any suggestions people? What im trying to do is get windows mobile 6.0 or cross bow installed from a ROMUpdateUtility_Wizard_NoID program and a NK.NBF file. I'm a complete noob so just wanted to see if it would do it but hmm .
Any help would be greatly appreciated
dnt408 said:
To get into bootloader mode you can also hold down the Multimedia button (button on side below the volume button) and press reset.
To program your data you can do ##3282# and edit from there.
Or if you can find a serial cable for it ( made one) you can used QPST.
First option should be easier for you.
The code is for sprint phone. For verizon I think it's #*#3282 + Send key. Hope it helps
Click to expand...
Click to collapse
Everytime i tried *#3282 + Send key in my 700w verizon, the phone asked me to switch ON the phone network first but i failed all the time.
How to fixed this? thanks a lot.
There's two ways you can fix this.
First:
1) Buy Tweaks2k2 and install on your imate Product
2) Using the Tweaks Program, change the system font
3) Soft Reset using psshutxp (NOT USING THE HARDWARE BUTTON)
4) Start Opera (Problem is solved)
5) (Optional) Run Tweaks2k2 again and change system font back to original (Tahoma). Soft Reset again using psshutxp (NOT THE HARDWARE BUTTON)
Second option (because I'm cheap and I don't want to buy the program:
1) Look here: http://msdn.microsoft.com/library/d.../html/cgconreplacingwindowscedefaultfonts.asp
2) Using a Registry Editing Program, go to the registry entries listed in the link above and change the name of the font (i.e. "Nm") to Courrier New. I recommend you do this to all 4 registry lines (Someone who's smarter than me can figure out which one specifically does the job).
3) Once you've changed the "Nm" entry of the 4 listed registry keys listed above, do a soft reset using psshutxp (NOT THE HARDWARE BUTTON)
4) After reboot, run Opera and the problem is solved.
5) (Optional) Go back and change the 4 registry keys to their original value (Tahoma) and do a soft reset using psshutxp (NOT THE HARDWARE BUTTON) Hope this helps.
Justin
Or another easier way.
Just copy verdana.ttf from your computer to your /windows/fonts directory on your Universal.
Wrong....
The only thing that helps is to copy Verdana.ttf from PC to /Windows older on Universal.
I love this forum and you guys !
thanks you ! Will try this ASAP
baudy2 said:
Wrong....
The only thing that helps is to copy Verdana.ttf from PC to /Windows older on Universal.
Click to expand...
Click to collapse
Well it worked for me. Guess it doesn't mather wich folder you copying it to.
Thanks....
goxboxlive,
Thanks for the comments. I tried you're way as well. You're right, its even easier. However, if folks want to put a custom font on their machine (way off topic), they can use the registry edits I used above. I've been playing with it for a while now. I had no idea you could do all this stuff. Fun.
Re: Thanks....
weatheryoko said:
goxboxlive,
Thanks for the comments. I tried you're way as well. You're right, its even easier. However, if folks want to put a custom font on their machine (way off topic), they can use the registry edits I used above. I've been playing with it for a while now. I had no idea you could do all this stuff. Fun.
Click to expand...
Click to collapse
Hi there. Yes it's a funny machine, there's a lot things you can do with it. One of the funniest things is this: http://forum.xda-developers.com/viewtopic.php?t=35972&postdays=0&postorder=asc&start=0
goxboxlive said:
baudy2 said:
Wrong....
The only thing that helps is to copy Verdana.ttf from PC to /Windows older on Universal.
Click to expand...
Click to collapse
Well it worked for me. Guess it doesn't mather wich folder you copying it to.
Click to expand...
Click to collapse
works as well here, sometimes the most simple solution are the most efficient ones !
Can someone explain what the 'psshutxp' is?
Thanks
psShutXP:
http://ppcsoft.narod.ru/english/
It's a skinnable little app that allows you to turn the screen off (not just backlight - separate utility as well), soft reset, power down, and hard reset. I use it to turn the backlight off and do a soft reset if I can't find my stylus.
Note that the recommendation is probably made with regards to the soft reset otherwise possibly being done before the registry/file changes are written away. You can alternatively wait a while, or try to power down the device fully (hold the on/off (standby, really) button for a while, and you should get a prompt).
ZeBoxx said:
psShutXP:
http://ppcsoft.narod.ru/english/
It's a skinnable little app that allows you to turn the screen off (not just backlight - separate utility as well), soft reset, power down, and hard reset. I use it to turn the backlight off and do a soft reset if I can't find my stylus.
Note that the recommendation is probably made with regards to the soft reset otherwise possibly being done before the registry/file changes are written away. You can alternatively wait a while, or try to power down the device fully (hold the on/off (standby, really) button for a while, and you should get a prompt).
Click to expand...
Click to collapse
psShutXP does not work on WM5 devices. I tryed ones and the ppc died...
ZeBoxx said:
psShutXP:
psShutXP does not work on WM5 devices. I tryed ones and the ppc died...
Click to expand...
Click to collapse
It works great on my JasJar.
Regards,
Gordo
Re: Thanks....
Actually I copied Arial.TTF into the font folder and it became the default font. Tried calbri instead and it too worked..
BUT once you have added a font to the directory I cant seem to delete it.
What I am having happen, is the keyboard pops up as soon as Opera opens, when I close it Opera unboots, ditto with IE now..
Charles
hallo friend, i ve a big problem on my p3300, i have downloaded program much important for my job as FIELD TEST, but on artemis does not works.
so i have read on web more more pages and i understand that the problem is a dll that in p3300 /windows there isnt: rilgsm.dll.
without this dll some port are closed on my htc i suppose com 9 and 6 (network ) so field test doesnt work propely!
can someone explane me how i can solve this problem or i can extract or add this dll.
i have actually italian wm6 official on my p3300 , but i can install also a unofficial rom with rilgsm.dll.
i wait for help as soon as possible
thanks
rilgsm.dll is in the Artemis Touch 4.01 WM6.1 WWE ROM - Lite without cube ROM as well as the other versions (full, vanilla, etc) I suppose.
But, I'm not sure that is the complete answer to your problem. I was trying to run a program which ran fine on my previous PPC using com6 but would not run on my Artemis using com4 (needed to run TomTom). Today, I found a solution here that works. It's called portsplitter. I installed it today and sucessfully used TomTom (requires com4) and the other program (requires com6) as well on the newly created com8! (see the link above to makes sense of that). Maybe what you need?
Here's another link in the Artemis forum discussing this issue.
runningtiger said:
rilgsm.dll is in the Artemis Touch 4.01 WM6.1 WWE ROM - Lite without cube ROM as well as the other versions (full, vanilla, etc) I suppose.
But, I'm not sure that is the complete answer to your problem. I was trying to run a program which ran fine on my previous PPC using com6 but would not run on my Artemis using com4 (needed to run TomTom). Today, I found a solution here that works. It's called portsplitter. I installed it today and sucessfully used TomTom (requires com4) and the other program (requires com6) as well on the newly created com8! (see the link above to makes sense of that). Maybe what you need?
Here's another link in the Artemis forum discussing this issue.
Click to expand...
Click to collapse
thanks for answer, maybe can you explane how i can set ports?
i need only field test works , it is only excutable file, no need installation, there isnt configuration to do , is very simple, maybe i can send to ou the file to test.
i wait for help thanks again
pls help me
I don't know how to copy just the rilgsm.dll file you want. It's part of the rom and so access is denied on both the phone and via activesync.
Also, I don't know how to set ports. Did you try the portsplitter application I linked to above? I am using an application on my phone right now that uses port 6 thanks to the portsplitter application. Try it!
Upload your application here or post a link, and I'll see if I can give it a try.
i ve uploaded file here: http://www.megaupload.com/it/?d=ZL2OLMS0
please try it, anyway i dont know how to use port spkitter right mode, maybe i wrong to setup it
for it i need help
no one answeres.........
what's up with the (mad) face man? I have been trying to help you. I had a busy weekend and we are in totally different time zones - so relax.
Here, I will spell out very clearly how to use portsplitter...
Artemis settings:
start menu\settings\system tab\external GPS
programs tab...com8
hardware tab...com9/baud 4800
access tab...tick (select) manage GPS automatically
PortSplitter settings:
input: using your keyboard type COM8
baud: select 4800
output: select com6 and press 'add' then press 'start splitter'
the program will then be running in the background
Now go to your fieldtest app and set it to use com6 at 4800 baud. Or, if you know it uses com6 by default, just open it and see if it works.
If it works, you have two options. You can either start portsplitter each time you want to use it. Or, go back to the portsplitter app and tick 'autostart' so a link will be placed in the \windows\startup folder and you won't have to start it manually each time you reboot. It will always just run in the background. (edited to ad...) Actually, selecting 'autostart' only saves your settings so each time you open portsplitter it will run on com8 etc. You need to manually put a shortcut in the windows\startup folder for it to actually start up each time you turn your phone off and back on.
Now, if you use the portsplitter AND any other GPS programs (i.e. TomTom), you'll need to set that program (i.e. TomTom) to use com6.
In TomTom you do this by pressing the lower right hand corner of the screen where the clock and signal strength bars are. On the next screen press the right hand side of the screen where the battery status and signal strength bars are. Now press the lower left corner button called 'configure' and choose 'other NMEA GPS receiver' and press 'select'. Set the baud rate on the next screen for 4800 and press 'done'. Finally, press 'com:6 Port Splitter' and press done!
It works fantastic on my Artemis. I have another GPS program and I set up the GPS communications to use com6 at 4800 and it works like a charm as well. I've set PortSplitter to autostart after each boot, and I haven't given it a thought since. It just works.
I tried to download your app but there is a message that says "The file you are trying to access is temporarily unavailable."
I have fieldtest running on my Artemis right now. It looks like it auto sets itself to refresh every 3 seconds. The right hand side of the screen is called 'GSM' the left is called 'data'. Almost all data fields say N/A except for RSSI and Rx Quality. So, it looks like it runs, but does not work.
Probably due to this:
"fieldtest is not compatible with 9100/Prophet/Artemis. For those devices you need to use GSMTestMode.exe"
However, just in case you might still find this info useful...before trying fieldtest on my phone, I searched what it was about and found the info here. You may have already read it, but if not, there you go. BTW, (if you DID read it) you could have just directed me there to download the program rather than how you did it.
Lastly, I tried the registry edit:
HKEY_LOCAL_MACHINE -> SOFTWARE -> HTC -> EngineerMode -> BuildInEngineeringModeApp = 1
It changed nothing, the program is still mostly full of N/A responses. Also, ran the program from \windows and got the same responses as when I ran it from the memory card.
GSMTestMode.exe exists on my Artemis in the \windows folder.
To use it check this registry setting:
HKEY_LOCAL_MACHINE -> SOFTWARE -> HTC -> EngineerMode -> BuildInEngineeringModeApp = 1
Mine was 0 originally. I changed it to 1 and soft reset the phone. Then, opened the \windows folder and clicked on GSMTestMode.exe and all the info shows up instantly.
That was with portsplitter running in the background. So, I disabled portsplitter, soft reset and clicked on GSMTestMode.exe again - and it worked. Using/not using portsplitter made no difference. I did not check the values reported since I don't care enough. The rest is up to you.
thank you very much runningtiger, your info were very very precious for me, now works all fine.
only 1 problem: after i edit value from 0 to 1 in registry, gsm test mode works fine , but if i reboot artemis or shutdown and restart registry value back 0.
is there any way to solve?
bye and thanks again
This isn't an issue on my phone. I made the registry change using TotalCommander and used the exit command on the menu to close TotalCommander (rather than the X in the upper right hand corner). Then, I soft reset by pressing the reset button with the stylus. When my phone was ready to go again, I opened GSMTestMode.exe used it, closed it, then reset my phone again, used GSMTestMode.exe again and it worked again. So, the registry change sticks on my phone.
Usually the reason registry changes don't stick is not enough time passed before soft-resetting the device. Some registry changes are ready to use immediately, but others take a moment to actually write to the registry and if that process is interrupted then the change isn't actually made.
Three thoughts on your phone...
1) did you wait about a minute after making the registry change before soft-resetting your phone? This allows plenty of time for the change to be actually written to the registry.
2) wait a minute after doing the registry change, then try instead of soft-resetting doing a full power down by holding the power button until you are asked if you for sure want to turn off the phone and then let it sit a minute (off) before starting it up again?
3) can you try using TotalCommander to make the registry change like I described above?
runningtiger said:
This isn't an issue on my phone. I made the registry change using TotalCommander and used the exit command on the menu to close TotalCommander (rather than the X in the upper right hand corner). Then, I soft reset by pressing the reset button with the stylus. When my phone was ready to go again, I opened GSMTestMode.exe used it, closed it, then reset my phone again, used GSMTestMode.exe again and it worked again. So, the registry change sticks on my phone.
Usually the reason registry changes don't stick is not enough time passed before soft-resetting the device. Some registry changes are ready to use immediately, but others take a moment to actually write to the registry and if that process is interrupted then the change isn't actually made.
Three thoughts on your phone...
1) did you wait about a minute after making the registry change before soft-resetting your phone? This allows plenty of time for the change to be actually written to the registry.
2) wait a minute after doing the registry change, then try instead of soft-resetting doing a full power down by holding the power button until you are asked if you for sure want to turn off the phone and then let it sit a minute (off) before starting it up again?
3) can you try using TotalCommander to make the registry change like I described above?
Click to expand...
Click to collapse
i resolved upgrading to wm6 official and now works all fine, so my friend thanks again for support and precious infos
Greetings to all!!!I represent you first the european the build WM6.5 Standart,language,only english!!!!!It is made on a basis OEM-parts from WM6.0 O2 UK,with kitchen use amazingosp from is forum ioicn.com.cn,build OS has given ALEUT from is forum wce.by http://www.4shared.com/account/file/134858805/26201766/WM65Eng.html The problem with the chamber is solved. The reference has updated.
I tried using this and got nothing. It seems to be running, but doesn't flash the phone. What's the deal with the WM5storage .jpg? The instructions are not in English so is it prompting us to use a particular setting? When it apparently finishes, it just sits there waiting for the phone to reboot, which also never happens...Try again please, or post some instructions.
drummer10630 said:
When it apparently finishes, it just sits there waiting for the phone to reboot, which also never happens...Try again please, or post some instructions.
Click to expand...
Click to collapse
This ROM intended for loading with use usb-cable.When phone is switched off,do so as for loading from a flash card.After phone will enter in flashing mode,connect it to the computer and also start "ezboot.exe".Jupiter.abi&Jupiter_SPBL.abi files,should is in one directory with ezboot.exe.I hope, will understand further
cubaseda said:
This ROM intended for loading with use usb-cable.When phone is switched off,do so as for loading from a flash card.After phone will enter in flashing mode,connect it to the computer and also start "ezboot.exe".Jupiter.abi&Jupiter_SPBL.abi files,should is in one directory with ezboot.exe.I hope, will understand further
Click to expand...
Click to collapse
So do you mean, start the phone in Bootloader mode, and run the ezboot.exe file?
drummer10630 said:
So do you mean, start the phone in Bootloader mode, and run the ezboot.exe file?
Click to expand...
Click to collapse
Yes,so
Ok, It works. Here's how I accomplished it, and some of the features you will find in this rom. I used WINXP Pro SP3.
1. Disable (uncheck) "Allow USB" and "Allow Connections to one of the following" (Comm Ports) settings in Active Sync 4.5
2. Double click the EZBOOT.exe and then click the NEXT button (it's in a language that my computer can't read, so just assume the NEXT button is on the LEFT).
3. With the unit off, and the sim inserted, but no storage card, insert the USB cable and hold the joystick to the DOWN position (this is where many get confused, its the down or south direction, toward your body, NOT pressed IN), and press the power button at the same time. You will see it enter bootloader mode, and it says updating on the phone screen.
4. Now click the NEXT button on the EZBOOT program and it will flash your unit.
5. It took about 15 minutes and I was using a UK version O2 XDA Graphite, with the official WM6 O2 rom.
6. You will see red and green bars going left to right on your phone. Don't panic, it's normal.
7. It seems to finish the last bit faster than the rest, and reboots to the normal O2 Welcome screen, and then a NEW ORANGE Windows 2nd screen, then to the setup screen, with all the normal options.
8. The default homescreen is called Sliding Panel, and there is another new one called Sliding Panel Media which adds shortcuts for playing music, and viewing photos. I am sure someone has written a review of WM6.5 so I will leave the other descriptions for other websites.
A few notes:
it uses bootloader Eboot ver:UK_V3.4.0_XB FUU
and it SAYS you will be flashing OS M_V6.1.0_SZT_080320 and
RADIO V3.17.2 P10_2008-03-20 but I ended up with
RADIO V 2.17.2 P9_2007-06-11 so I guess my radio didn't change? No problem, I made sample texts and calls with zero issues.
The threaded text messaging is kinda cool and the sliding shortcut functions of the homescreen is handy...
In Settings/About it reads: Windows Mobile 6.5 Standard CE OS 5.2.23017 (build 23017.5.3.0). I am guessing that a hard reset will change my radio, but I will leave it for now, as it seems to be working ok. Thanks to cubaseda for the rom.
cubaseda said:
The problem with the chamber is solved.
Click to expand...
Click to collapse
Thank you for the rom and fixing the issue with the camera. I used a regeditor to disable threaded SMS and to allow for Sent Messages notifications.
Can this be used in o2 graphite Asian? Please suggest
tigerstigers said:
Can this be used in o2 graphite Asian? Please suggest
Click to expand...
Click to collapse
If you try it and it doesn't allow you to flash, then the answer is still Yes, if you use ResHacker, and Open EZBOOT.exe in Reshacker.
Then modify the part of the package which is responsible for telling you that the phone you plugged in is not an XDA Graphite. And its actually correct, as the device name for Asian graphites is something like "O2 Graphite" not "XDA Graphite" which is what the installer is expecting. SO - Expand the node in the tree on the left that says "String Table" and then expand the node "3". Click the "1033" node, and you'll get some text displayed on the right. Look for a like that says: 34, "Xda Graphite" and change it to your device's name so it looks like this: "34, "O2 Graphite".
Click File -> Save As and save the updated package as something like UpdatedInstaller.exe.
tigerstigers said:
Can this be used in o2 graphite Asian? Please suggest
Click to expand...
Click to collapse
Yes, can. My phone Asian
Oh cool i wondered if there would be a ROM for this cool phone. I been looking for a while now. I will test.
Would be great to see more roms for this phone. I will test all new roms.
Hmm, i use windows 7 and tried this flash every way, it starts to flash then errors after 5 mins and doesn't do it. When it errors the usb makes a noise so it is like it stops communicating so not to flash. I'll have to flash on a m8's pc.
............
I got it upgraded successfully. Thanks a lot
o2 menu is not working post upgrade. Is there a way i could install the menu seperately.
Appreciate your help
tigerstigers said:
o2 menu is not working post upgrade. Is there a way i could install the menu seperately.
Appreciate your help
Click to expand...
Click to collapse
Excuse, but this ROM is positioned as WWE, instead of for services o2.
thx to sharing
a very good upgrade for graphite but without oem apps like o2 menu and o2 config
thanks for this rom
hope we can get another version with o2 oem apps
Tabbe said:
a very good upgrade for graphite but without oem apps like o2 menu and o2 config
thanks for this rom
hope we can get another version with o2 oem apps
Click to expand...
Click to collapse
This ROM requires completion.For those services O2 are necessary to a clod, i will lay out the special version later.Personally to me, it is not necessary,since in Russia and the adjacent countries there is no operator O2,and I consider the smartphone as Asus Jupiter
cubaseda said:
This ROM requires completion.For those services O2 are necessary to a clod, i will lay out the special version later.Personally to me, it is not necessary,since in Russia and the adjacent countries there is no operator O2,and I consider the smartphone as Asus Jupiter
Click to expand...
Click to collapse
no offence but your title of this post is also O2 Graphite as this model is sold to O2 from Asus.
as O2 Asia release xda graphite, it comes with o2 oem apps, its great to have more support than just microsoft default menu screen