Qtek 8500 can not be possible turn on, batery is on 100%. Sometimes it is only light red diode. Also can not be possible make boot.
Any ideas??
Related
hi,
yestarday i charge my ba until the charging led turn green, i reset, then when it comes to the 3 color lines with the radio version etc at the lower right, it hang. it just display that screen for 5 minutes. then i pull off the battery to reset it. (because i lost my stylus). i put the battery again. now it wont start.
when i put the phone in the cradle, the charging led will not light aymore.
btw, my ba is using wm5.
anyone know what i should do now?
thanks
just to add, when i put it in cradle and connect to pc, nothing happens at pc, but steady red light appear at ba.
anybody have any idea?
thanks
Battery is charged? (take it out and charge using cradle)
Is there "Serial/USB" on the screen (it's not enlighted, you need external light to see it).
If battery is charged and screen is empty not reacting for power and/or reset, you device might be totally dead.
PS: Styluses are not expensive.
jakubd.. yes battery is fully charged. i charge it separately from the ba. there is no usb/serial on the screen.
just when i thought to upgrade to wm6. damn. is there really no way of getting it back alive? hard to accept the fact that its dead.
ps: i have extra stylus, but the stylus hole is already loose. thats why i didnt use stylus anymore.
There is a chip in battery and sometimes it gets crazzy..
You must take off the battery from PDA, then charge battery in cradle...
after 1 hour you will put it on PDA and charge with pda...
It s solved...
shantilas.. i have done it. still nothing happened.
Hi all,
a friend of mine gave me a broken P3300 that just doesn't turn on. The first thing I've tried was charging the battery but I noticed something strange: the battery' status led is always red, even after some hours. I thought this PDA fell in water and had the battery charging circuitry broken, so I removed the battery but the led still remains red.
Edit: it doesn't even turn on in bootloader mode
Do you have some suggestions?
Thanks a lot!
Think it is the chargingsystem in the phone is damaged. Had a qtek 9100 a year ago and blew up that part with tomuch volts. Led turned red then to.
I used to be able to charge my x51v using a usb cable while it's on. After I upgrade the rom from WM5 17 to WM6 A03 RTM, I found it couldn't work anymore. Even though the power light is still yellow while it's in use. The battery indicator keeps lowering the percentage.
Something must have been changed from WM5 to WM6. Can anyone help to resolve the issue? I need it when I am using my GPS.
5.4VCC
I have a similar issue, well, I figured out that it won´t charge when the device is on, it only charges if there is a 5.4 Vcc power supply. USB is only 5vcc, the light is on, but not charging.
I measured with an amperimeter to understand what was going on. When my axim is off and charging, there is some current, but if it is turned on, the current stops suddenly.
Another funny thing is that if the device is charging in computer USB port, and the battery is low (50%), the device won't turn on! I have to unplug the cord to wake up the axim...
BTW if you plug a 5.4vcc it will charge normally, turn on, turn off, everything...
I don´t believe that it´s a wm6 issue, but if you points it, we should ask for somebody with wm5 to run some tests.
Hallo guys,
I have my qtek 9090 leave at long time periode charge and forgot to remove it from charging cardle. Now it shows only the red indicator (upper right) and won't turn on , i try to hard reset but nothing happend. Does any body knwons what happend to my qtek 9090? (hope only the battery problem). Pls help !!!
Thx
domeX2N
domeX2N said:
Hallo guys,
I have my qtek 9090 leave at long time periode charge and forgot to remove it from charging cardle. Now it shows only the red indicator (upper right) and won't turn on , i try to hard reset but nothing happend. Does any body knwons what happend to my qtek 9090? (hope only the battery problem). Pls help !!!
Thx
domeX2N
Click to expand...
Click to collapse
Generally, a red light is some kind of hardware failure. However, it could be a failure of the charging circuit.
Try a different battery and see what happens.
Battery controller or motherboard down... you will go to service
i think your batrry is die!
Before you do that. Try using another charger.
Red indicator means that it's not charging.
Batteries dont die that fast, FYI.
How do you fix the circuit failure ,ive got the same prob but mine keeps restarting when i put in the cradle ...?
qtek 9090 show only red indicator when charging
So guys, any solution how to fix the problem with constantly restarting device in the cradle??? And suggestion how to power it on whithout the power supply??? BTW Tried with different AKB, no success!!!
Plug it in usb cable without battery first, and put battery in.
The battery needs to have some charge on it. Try cradle to charge it a bit before.
hi,
MY HTC P3300 PHONE SUDDENLY GETS OFF EVEN IF THERE IS CHARGE ALSO ITS GET SWITCHED OFF SOI NEED TO TURN IT AGAIN TO ON MODE , SOMETIMES IT CUT OFF WHILE IN PHONES. SO PLEASE LET ME KNOW THE WHATS THE EXACT ISSUE .
...
the exact issue here is the battery dude..
1. buy new battery
2. charge while OFF
done
(simple really, but remember to charge while its off.... red light for dead, orange for charging, green for fully charged)
Is there anything to do when you get a red light?
I have a P3300 that is dead. I've changed battery etc. but nothing. Sometimes I get a red light for a few seconds. That's all.
Just went dead, no flashing error or something.
Is this something that can be fixed?