Hello.
After upgrading, my Universal dont boot. It's locked at operator start screen.
Hard reset dont unlock it from splash screen.
If I press (ligth + soft reset), select Clean Registry Hive and Format Storage to YES, then reboots and the screen goes to WHITE.
I dont know what is happening...
SOme help please.¡
Try putting it on Boot Loader Mode and flash it back with the old ROM.
Im sorry but the problem it's that i dont have OLD rom :x
see that: http://forum.xda-developers.com/viewtopic.php?t=43592
:wink:
see that: http://forum.xda-developers.com/viewtopic.php?t=43592
:wink:
Any of this post has worked...
Readed from beginning to end.
The Universal upgrade goes well, reboot well, but frezee at logo screen...
Any idea?
jjgarcia said:
Any of this post has worked...
Readed from beginning to end.
The Universal upgrade goes well, reboot well, but frezee at logo screen...
Any idea?
Click to expand...
Click to collapse
Have you tried flashing it back to the OLD ROM or the PREVIOUS ROM you have used and worked on your unit? Try finding another link to download your NEW ROM, sometimes files get corrupted.
I tested with a lot of roms, imate, qtek, t-mob... but nothing works,... i will try to get an original rom and flash from SD card...
get connected :?
bad bad bad, not working...
:evil:
i have the same problem i also, stuck at the splash screen. i have bootloader v1.01 i first unlocked my mda pro with the buzz programm after that i flashed wit the tmobile rom. and it got stuck i reflashed it wit my old qtek rom and it still freezes at the qtek screen.
I think the problem lies on your Boot Loader version. Most of the LATER released ROM is using Boot Loader version 1.00. So anyone who flashed their device with the latest T-Mobile ROM without removing the bl.nbf file got updated to version 1.01. Thus any ROM you try to use won't work.
Try flashing your devices back with Boot Loader version 1.0, then use the old ROMs.
Yes, i have the 1.01 bootloader...
How Can I downgrade to 1.00?
Thanks in advance¡ :wink:
Some idea in downgrade bootloader?
. .. .. .. ... .. .. :roll:
jjgarcia said:
Some idea in downgrade bootloader?
. .. .. .. ... .. .. :roll:
Click to expand...
Click to collapse
Here you go my friend. Just follow the instructions from this thread: http://forum.xda-developers.com/viewtopic.php?t=48590&highlight=boot+loader+1+00
Good Luck Mate!
The solution dindnt worked, because the COUNTRY ID¡¡¡
In the post anybody solved this problem. How can i upgrade? The MaUpgrade_NoID do NOT work.
i downgraded the bootloader tot v1.00 but it still doesnt work wit the old Qtek WWE rom is used before. what to do now...
how do you downgrade? no country-id error?
shing said:
i downgraded the bootloader tot v1.00 but it still doesnt work wit the old Qtek WWE rom is used before. what to do now...
Click to expand...
Click to collapse
You have to use the Ma_Upgrade_No_ID Tool and I made a short instructions on how to use it in this thread: http://forum.xda-developers.com/viewtopic.php?t=42784&start=50
AND REMEMBER to put your device on Boot Loader Mode before double clicking the Ma_Upgrade_No_ID Tool.
cktlcmd said:
shing said:
i downgraded the bootloader tot v1.00 but it still doesnt work wit the old Qtek WWE rom is used before. what to do now...
Click to expand...
Click to collapse
You have to use the Ma_Upgrade_No_ID Tool and I made a short instructions on how to use it in this thread: http://forum.xda-developers.com/viewtopic.php?t=42784&start=50
AND REMEMBER to put your device on Boot Loader Mode before double clicking the Ma_Upgrade_No_ID Tool.
Click to expand...
Click to collapse
yeah, i already did that, but what i wanted to say. it succefully downgraded the bootloader from v1.01 to v1.00. and it also succesully upgraded the Qtek WWE rom. but it is still stuck at the splash screen (the screen shows QTEK wit a sky background and it shows the R 1.09.00 G 42.42.P8 D1.30.77 WWE)
jjgarcia said:
how do you downgrade? no country-id error?
Click to expand...
Click to collapse
i had no country error, i put my mda in bootloader mode and i used the v1.00 bootloader upgrade from the link that the guy posted in this thread.
Hi guys,
I stupidly upgraded my unlocked T-Mobile MDA Pro and now it does not boot. It gets stucked on operator splash screen. I have read lots of articles here and on buzzdev and it seems to me that there is a problem in bootloader. Is there any chance I can download bootloader ver. 0.56 somewhere?
Thanks
Shishko
Update
Little update... When I tried to reformat DOC, it said DOC_format failed!
i urgently need your help with my htc prophet after I haven't found an answer in the portal already:
as my prophet (seller is vodafone) showed the vender issue when trying to upgrade i used the downgrade and unlock cid program i found here on the page. after step one, using the downgrade command my device no gets hung while start up, I can see the ipl/spl window, that's all. nothing will happen even after waiting an hour or trying to hard reset the device again. the os listed now is 1.0.13.21
my problem is that due this active sync doesn't recognize the device anymore, i cannot connect to it and as of this i cannot go on with installation...
need more info? please let me know!
troost said:
i urgently need your help with my htc prophet after I haven't found an answer in the portal already:
as my prophet (seller is vodafone) showed the vender issue when trying to upgrade i used the downgrade and unlock cid program i found here on the page. after step one, using the downgrade command my device no gets hung while start up, I can see the ipl/spl window, that's all. nothing will happen even after waiting an hour or trying to hard reset the device again. the os listed now is 1.0.13.21
my problem is that due this active sync doesn't recognize the device anymore, i cannot connect to it and as of this i cannot go on with installation...
need more info? please let me know!
Click to expand...
Click to collapse
i managed somehow to install the 02.47.11 rom, but it seems that the os isn't starting.
is it possible, that wm 5 got lost due the upgrade?
help, please
Hi, my question is : how can i unlock my phone when i have only access to the bootloader.
My phone freezes on second splash screen and i can't put a new firmware cause it's locked (294 invalid vender id). Thanks a lot. ++
not that i know of
also vendor id have nothing to do with sim lock
kinda trikcy for people to help you when you give no info about
what device or rom you use or try to use
the flash exe often comes in versions with _noID.exe in the end thats a good step on the path to flashing with a rom by another operator
Hi, I've got an HTC Mteor mobile phone
I had Firmware 1.32 and i tried to upgrade with 1.34. But firstly i must upgrade the SPL by v1.09. After that i tried to upgrade with 1.34 and i have always the same error : 294 Invalid vender ID.
I tried several roms (1.13, 1.32, 1.34) and i have always the same problem.
I tried also to upgrade the phone by putting the rom on my SD card (BREEIMG.nbh) but it doesn't work (error : not allow).
I don't know what to do. Thanks a lot for your help. ++
Hi, does anyone have an idea about my problem ? Thanks a lot. ++
Hi, nobody can help me ? My mteor isn't working anymore. Please help !
Hi All,
My P3600 is stuck in bootloader after trying to install the official D810 ROM. I used the CID unlock install first, which seemed to work fine, I then tried to install the D810 ROM and it looked like it was working, but stopped at 28% with some kind of communications problem. Recovery does not work... it displays the progress bar, but then goes straight back to the rainbow bootloader screen.
Any help or suggestions appreciated.
Thanks
Rael
Phew... got it working. I removed the battery and replaced, boot loader was still displayed, and then ran the old official WM5 update which seemed to progress from 0 to 100% sucessfully.
Thanks
Rael
Your phone was relocked by the update, and I'm guessing you don't have an actual D810 that's supposed to get this update. The best method to flash this is to follow my post here:
http://forum.xda-developers.com/showthread.php?t=316410
oops, you can use hard SPL in this link:
http://forum.xda-developers.com/showthread.php?t=299659
i got the problem like you when i upgrade my device to wm6 officiel.
After you flash hard SPL Olipro, you can use PC to flash again another rom you like.
(sorry for my worth english)...
People just do NOT know how to read...sigh.