When i try to upgrade Radio after upgrade process my phone will die dosn't work he havn't got any radio version and the bootloader is gone i cant upgrade anymore because there is no synchro by USB how to made it correctly to repair it.
please help me my phone is withIPL/SPL ver 1.03 (G3) Radio no one after upgrade before 1.4... or something
SIM LOCK ORANGE PL
mail: [email protected]
Try THis
Get it to the Bootloader mode and Flash it with any ROM.
Related
Read here:-
http://www.msmobilenews.com/page/1223/
Re: Warning to Universal Users !!! Do not upgrade to AKU2 if
"Warning to Universal Users !!! Do not upgrade to AKU2 if you have bootloader v0.56 on your device, DO NOT upgrade to an AKU2 or you will turn it into a paperweight!
To check your bootloader, hold the light key, power key and press the reset button. If it says v1.00 then you don't need to worry. If it says v0.56, you must not upgrade to AKU2. If you do, the only way to fix it is to flash back to a pre-AKU2 rom or upgrade your bootloader to v1.00 (which is currenty not possible publically).
How do I know this? Personal experience and a good friend with a lot of technical know-how."
just to let you know, i've edited the article to expand on what actually happened and how i came to find that out
I have a 0.6 boot loader
Will 0.6 boot loader upgrade to the new rom or not?
I have 0.6 Bootloader and newest Qtek rom works fine.
Me too....3 Unis, all of them hv 0.6 and are running latest O2 ROM...
Once again I reapt..while flashing I hv always put them in Bootloader mode manually first and then flashed...always
sh!t
Great... just ran the update on my XDA Exec (not sure about my bootloader version), after the phone rebooted during the first mins, I got an error msg on the PC.
Now the phone won't power up, not even show any light indications when charger plugged!
Damn!
I have the problem because i have this rom and spent a lot of time to try to flash the new AKU2 rom.
I sent a post HERE
but nobody answer :evil:
And HERE
Have some responses
And now what can I do to uprade my bootloader to 1.00 ?
if you stack on Bootloader, possiblity of recover it by this post.
http://forum.xda-developers.com/viewtopic.php?p=254595#254595
if stack on the SPlash Screen, seems to be no solution now.
My Exec also stucked Splash. Bootloader Ver.1.0
My Jasjar Bootloader Ver0.60 is still alive, sometimes stucked on Bootloader after flash ROM, but can escape with the tool on that link
Thank but I don't enderstand, my Universal is working well on old rom but not with AKU2 rom.
Now I have to change the bootloader version ton 1.00
Do you know how ?
Thanks
SEB152030 said:
Thank but I don't enderstand, my Universal is working well on old rom but not with AKU2 rom.
Now I have to change the bootloader version ton 1.00
Do you know how ?
Thanks
Click to expand...
Click to collapse
so, i think,, just think and guess, V0.60 is better than Ver1.0.
Many guys had troubles in V1.0.
How to get 1.0 bootloader, i can not find the way yet.
my exec was got it when flash some ROM, but can not find wich.
also Buzz reported MTTY.exe Task 32 command can back up Bootloader and Flash, i tried it but it was said "no permission task" and can not.
http://buzzdev.net/content/view/64/115/
[Universal] How to 'd2s' dump the ROM
Written by buzz_lightyear
Wednesday, 07 December 2005
Dump Bootloader:
USB>task 32
USB>d2s 70000000 80000
OS ROM + splash:
USB>d2s 70100000 3FA0000
XtendedROM:
USB>d2s 74100000 A00000
Radio ROM:
USB>d2s 60000000 a24200
Bootloader 1.0 Update
Look for this:
http://forum.xda-developers.com/viewtopic.php?t=48590
Bootloader 1.0 Update
Look for this:
http://forum.xda-developers.com/viewtopic.php?t=48590
what is "light key" ??
I'm a newb, i saw the update for AKU2 ROM...but i dont know how to find out what version I have on my phone...
what is a "light key"
Re: what is "light key" ??
here is another link to 1.01 bootloader
ftp://ftp.clubimate.com/JASJAR_BL1.01_RUU_V1.2.zip
I have not tried it.
HTC sais that you need to upgrade to it from 1.0 if you don't see text "Serial V1.0" on screen after entering bootloader. Though bootloader works fine even without this message.
I can confirm the freezing on bootscren is still there evern after ugradation to 1.01..don't know why...I guess a bad DOC...but if it is a bad DOC then why it accepts the flash?
Hi,
ive flushed my O2 Orbit with the PDAMobiz rom, and it is now stuck at the boot screen at
IPL 1.25.0001
SPL 1.25.0000
GSM 02.67.90
OS 3.4.00
I can go to bootloader and have tried the HTC firmware but the device reset itself after 3% !
i cannot use the http://www.imei-check.co.uk/c3unlock.php unlocker tool as it requires activesync to be connected to the device which obviously wont connect as it stuck on the boot screen or bootloader..
the phone wasn't unlocked using any tool before hand...
please please help!!!!!!
You can only bring it to life with original ROM for your device. If it does not exist, you have a brick, and have to get it repaired by a shop.
im usre i read somewhere that there are some ways to fix it as long as you can access the bootloader which i can..
I have the same problem ... But ... I downloaded my original ROM via aWizard ... Is any way, how flash this file (extension NBA) back to my Orbit ???
I'm sorry to say guys. I had EXACTLY the same problem you have described. I had to go back to an O2 shop and send my "brick" for repair. Thankfully though my phone was still under warranty so didn't cost me a thing.
how long did it take O2 to fix it
Sand,
how long did it take O2 to fix it
HELLO , Someone plz help me i have Cingular 8125 G3 with WM5 and i was trying to upgrede it to WM6 !
IPL 1.08
SPL1.08
GSM 01.16.11
OS 1.8.11.1
what i did !
1.Unlocked using Lokwiz somthing
2. before i run WM6 Utility i used t-mobile radio 2.26 somthing radio update utility
and i dont know what happen during update process i was away from computer! when i got back phone was turned on !
and phone still turns on and have WM5! but phone dosent sync or charge or do anything when i connect it to USB !
phone is really slow now ! battery status is Unknown!
I try to turn off and on and
IPL 1.08
SPL1.08
OS 1.8.11.1
there is no GSM in there anymore !
someone plz help me !! thanks
And i can run Update again cuz USB and sync is not working!
i would look in the xda-wiki
if i could upgrade the device while it was
in bootloader
Hi guys i got problem and probably u know the answers.
i bought 2 HTC 8125 for 50 $ and one is working and other one just freez on Loading
IPL 1.01
SPL 2.25
GSM 01.12.10
OS 1.5.4.2
Got no idea what hapend to this phone.. Any Clues will be good, I try to do a hard reset of the phone and it say Press the send button to restore to factory setting , when i do that it say FAT formatin , Formatin Completed
and then went where it was previously ... I got no idea what that could bee. cause i cannot access over the USB
Please HELP i want to have this phone for tmobile..
for one thing your ipl & spl are different versions. if u want to know what to do look at the wiki for the wizard (make sure you do the cid and sim unlock). look up how to flash a rom, i recommend flashing the stock cingular 8125 rom (after you get the phone able to boot, and after you install the button rom) then flash ipl & spl to 3.08, then flash radio 2.71, then whatever 3rd party rom u want.
I've update the radio of my diamond p3700 but i've an error at restart
upgrade rom code error
please try again
how i can resolve it ?
Thx for our patience.
Flash back to another radio.
My guess is that you're trying to install a radio that needs your diamond security unlocked but your diamond isnt security unlocked.
you can verify if it is security unlocked by going into boot loader - if it is security unlocked it will say so on the top of the 3 colour screen.
What radio are you trying to use?
Radio v1.13.25.24 (Blackstone) (SU) (Quad Band)(NEW)
-Download here
HOW I CAN FLASH BACK ANOTHER RADIO ?
So, you're trying to flash a Blackstone radio to your Diamond
Is there a specific reason for this?
Here is a radio that is newer than the one you are trying to use and should work fine.
http://forum.xda-developers.com/showthread.php?t=545472&highlight=radio
Also, Why are you shouting?
my phone don't start
how i can upgrade the radio ?
thx
the program customruu don't find the phone
:°°°
ok
it's all ok
thx very much!!!
Ah, you found how to go into bootloader
AAArrrggghhh!!! Forgot to security unlock! Help!
endo75 said:
ok
it's all ok
thx very much!!!
Click to expand...
Click to collapse
Not for me, same problem, how on this earth did you do it???
Never mind, after 6 hours customRUU decided my phone had suffered long enough, oh well, no point going to sleep now, i'm at work in an hour. After 48 hours on the bounce, at least my baby is working again.