rings directory - P3300, MDA Compact III General

please,
how to update the rings directory on my artemis to setup to storage card ??
(note: the same tweak of the prophet not works).

any solutions?
I've tried:
1. Install Total Commander to your Wiz.
2. Open Total Commander on your Wiz.
3. Next to the drop down menu at the very top, there is a button to the right " \ ". Press this button.
4. Now, the very top folder/directory should be " \\ ". Double-tap or click this DIR with the center D-Pad button.
5. Next, double-tap or D-Pad down and click the "registry" DIR.
6. Next, double-tap or D-Pad down and click the "HKCU" DIR.
7. Next, double-tap or D-Pad down and click the "Control Panel" DIR.
8. Next, double-tap or D-Pad down and click the "SoundCategories" DIR.
9. Next, double-tap or D-Pad down and click the "Ring" DIR.
10. Next, double-tap or D-Pad down and click the "Directory" string.
11. You will be presented with the value for the "Directory" string, which denotes where WM5 will look for your ringtones. For the sake of simplicity, change this to "\Storage Card\" and click OK.
12. Close Total Commander.
13. Now, create a folder titled "Rings" on your Storage Card, and fill it with ringtones!
14. Soft Reset your phone by holding the POWER button for 5 seconds.
15. Reboot, and you're good to go!
Click to expand...
Click to collapse
but it doesn't work.

Ringtone
hi, i think you'd have to change the directory so it incorporates the rings directory. it should look something like this:
\Storage Card\Rings
I think not sure though

none of these solutions works on my artemis...

rings
put the ringtones into your My Documents
\storage card\my documents
it works
go to the options and it will be on the dropdown

I tried what swazpurohit suggests and it works fine on my XDA Orbit. many Thanks

Related

anyone know how to put"enable mouse mode" in today plug in?

as the topic, I found it is very useful in dopod Rom.
anyone got any idea?
On your PC open notepad and paste the following text:
64#"\Windows\mousemode.exe" SETMOUSEMODE
Save the file as mouse.lnk and then copy it to the "\Windows\Start Menu\Programs" folder on your device. Now follow the standard method for adding a program to HTC home and select the Mouse shortcut that you have just created - Easy!
Cheers
Alex
I've put the shortcut in the attached zip file, just copy the mouse.lnk file to the location above.
thanks a lot !
Al66 said:
On your PC open notepad and paste the following text:
64#"\Windows\mousemode.exe" SETMOUSEMODE
Save the file as mouse.lnk and then copy it to the "\Windows\Start Menu\Programs" folder on your device. Now follow the standard method for adding a program to HTC home and select the Mouse shortcut that you have just created - Easy!
Cheers
Alex
Click to expand...
Click to collapse
I do not know, how to "Now follow the standard method for adding a program to HTC home and select the Mouse shortcut that you have just created."
Could you help me, please?
Matti23 said:
I do not know, how to "Now follow the standard method for adding a program to HTC home and select the Mouse shortcut that you have just created."
Could you help me, please?
Click to expand...
Click to collapse
just tap on the + symbol and pick the mouse shortcut from the list.
Al66 said:
just tap on the + symbol and pick the mouse shortcut from the list.
Click to expand...
Click to collapse
I am very sorry, but I do not know, where is + symbol and so on? Could you, please, explain it to me?
Matti23 said:
I am very sorry, but I do not know, where is + symbol and so on? Could you, please, explain it to me?
Click to expand...
Click to collapse
You have the HOME plugin, there are some tabs under the clock, tap on the shortcut tab and tap + symbol, find your aplication or file you want to add. This is all.
PaliFarkas said:
You have the HOME plugin, there are some tabs under the clock, tap on the shortcut tab and tap + symbol, find your aplication or file you want to add. This is all.
Click to expand...
Click to collapse
Do I need to have HOME plugin in order to make this program addition? I have not it now.
Just want to know if there is any Cab for
Mouse Mode in WM6
i saw a video - HERE

[THEME] ActuproColor WVGA Adaptation by GLOC

I can't let Mallman have all the fun and glory (although he is doing a damn good job at getting those themes out, thank you for the inspiration)
Here are the installation instructions for my theme which is a WVGA adaptation of the ActuProColor theme
REQUIREMENTS:
1. Wisbar Advanced Desktop 2
2. A device capable of 480x800 (WVGA) resolution
3. WWE ROM although you can update the links in the theme and use it for any ROM. Just more work to install if it isnt WWE
4. The zip file which is downloaded from www.imagesoflife-online.co.uk/temp/ActuProColor_WVGA.zip and is 9.3Mb
Uninstall:
Switch themes in settings for WAD2 and delete previously installed directories
Installation:
1. Extract "ActuProColor_WVGA.zip" to folder on your pc. You will end up with one folder with all of the bits you need inside it, including the icons and the wallpaper.
2. From your pc,copy the folder named "ActuProColour_WVGA" to the "Themes" under your Wisbar Advanced Desktop installation directory. If you installed Wisbar to your internal storage (not storage microsd card) the folder is:
\Program Files\Lakeridge\WisBar Advance Desktop\Themes ***note*** if this folder does not exist just create it
3. Start WAD2 and go to settings by touching and holding anywhere on the screen.
4. Select the "General" tab
5. Select "Change Theme"
6. Tap "ActuProColour"
7. Select "menu" at the bottom and choose "Set as portrait"
8. Select "apply"
9. Press "OK"
I have installed Klaxon to link to the clock for alarms and there is a link for S2U2 for the lock option.
This is my first theme so be gentle with me.
Hope you enjoy it.
super nice keep it up!!!!
swindon?
hi how do you get the swindon weather? im in swindon, cant find it?
Press and hold anywhere outside of a 'button', select 'Settings', select the 'weather' tab, enter the city required and off you go.
Regards
cant d/l can u reup
It's still on the server...and hasn't changed.
I tried WAD with your theme but I have the following problems :
1) When the phone wakes up by pressing the power button, it shows WAD for a couple of seconds and then it reverts to S2U2. Therefore, if the power button is pressed accidentally when the phone is in my pocket, all widgets and phone hard keys are pressable during these two seconds, before S2U2 takes control. As a result, many times I find my HD in my pocket with lots of apps running ...
2) When I tried to replace S2U2 by extending your theme and building my own (WAD based) lock screen, the "home" hardkey didn't lock. As a result, I find many apps running when the phone is accidentally turned on and the home key is pressed ...
3) When the phone is locked by S2U2, it is asleep and I get an incoming call, if takes a couple of seconds to wake up. Even when it does, the dialer ID doesn't show correctly as either the caller's name or the control buttons (answer, reject etc) are not showing. This happens in both cases, that is if I use the WM buildin dialer ID windows, or the the S2U2 one.
Although I really loved WAD I had to reject it due to these problems.
Any ideas on these problems ?
Any answer would be appreciated
Unfortunately due to the quirkiness of WAD2, I have given up on it and now MSH3.
Sorry, can't help you any more as I don't have WAD2 installed.
Regards
GLOC said:
Unfortunately due to the quirkiness of WAD2, I have given up on it and now MSH3.
Sorry, can't help you any more as I don't have WAD2 installed.
Regards
Click to expand...
Click to collapse
I also had to reject WAD2 and turn to MS3 due to the problems described above. I posed this question just for verifying that these problems do not happen on my device only.
It is a shame that such a nice piece of customizable and creative software cannot cope with the HD device ...

How to remove BT total broadband setup from startup ?

- Hi. I bought recently an s620 locked on BT. I unlocked it using an internet
service. My problem is that a "BT Set Up" pops up when I turn on the phone and
it sends an sms to BT, trying to get the total broadband setup.
How can I stop it ? thanks
AlexNet! said:
- Hi. I bought recently an s620 locked on BT. I unlocked it using an internet
service. My problem is that a "BT Set Up" pops up when I turn on the phone and
it sends an sms to BT, trying to get the total broadband setup.
How can I stop it ? thanks
Click to expand...
Click to collapse
2 options hard-reset as you don't need the BT software on there, the better option follow this guide UPGRADE to 6.1 with PICS & LINKS
Or if you really want to keep the BT Bloatware that uses up RAM and slows down the phone then here you go:
Go into File Explorer (Start > File Explorer) press the Up command (left soft key) then navigate to 'Program Files' then to 'BTNetworks' in the folder there is an app called "HandsetSetupWizard" rename the file by pressing the right soft key > edit > rename. Rename it to something like 'HandsetSetupWizard.old" this will stop it running on boot up.
stylez said:
2 options hard-reset as you don't need the BT software on there, the better option follow this guide UPGRADE to 6.1 with PICS & LINKS
Or if you really want to keep the BT Bloatware that uses up RAM and slows down the phone then here you go:
Go into File Explorer (Start > File Explorer) press the Up command (left soft key) then navigate to 'Program Files' then to 'BTNetworks' in the folder there is an app called "HandsetSetupWizard" rename the file by pressing the right soft key > edit > rename. Rename it to something like 'HandsetSetupWizard.old" this will stop it running on boot up.
Click to expand...
Click to collapse
thanks!!!!!!
The problem solved very easily after all. Just removed the BTSetupWM6 from the programm files.

How to change the short cut for the soft keys on the home screen of tf3d

Hi ,
Can any one tell me how i can change the short cut of the soft keys on the home screen . Now they are phone and camera. I would like to change it to programs and file explorer.
I am using the new tf3d
Thanks
Use HD Tweak 0.5.4
athena99 said:
Use HD Tweak 0.5.4
Click to expand...
Click to collapse
thanks ... i forgot
But still the choice of programs is limited. Eg: "programs" can be assigned only to the right softkey.
is there a reg tweak or something to give more options?
Take a Regeditor of your choice go to \HKLM\Software\HTC\Manila\ Then you see HomeRSKpath HomeRSKtext HomeRSKArguments for the right Softkey, just enter the path of the exe file you want to execute as value in HomeRSKpath and a text of your choice in HomeRSKtext
Same for LSK for LeftSoftKey
Does anybody know what is the path and exe to get the dialer on left softkey?!
Try this one:
SoftKey Manager
I find this one the easiest to use. Just tick the HTC Diamond mode checkbox first and you can change the home softkeys to whatever you wish.
http://forum.xda-developers.com/showpost.php?p=2485292&postcount=16

SlidingPanle/Titanium Changer

here is my SlidingPanle/Titanium Changer hope you like it
only works on wm6.5
(1) copy Chome.tgz to your windows folder
(2) copy Titanium.lnk to start Menu
(3) copy CeleCmd folder to Program Files open it with resco press menu press 2 file association
(4) go to start Menu and press the titanium the press lift or right and pick
titanium panels for titanium and for slidingpanels for sliding panels
(5) reboot phone
Heres the link ⇩⇩⇩⇩​
woow, waiting for that
thanx rick
it now ready
downloaded
will this let us edit the panel like chome for 6.1? that's one of the things preventing me from upgrading

Categories

Resources