Hi Guys, I've recently bought a universal and was wondering if they will work with a wired gps cube wired with an RJ11 jack into a car Mount, ive got a Blue Angel that works fine with tomtom and the wired cube but I just can't get it to work with the exec, any ideas,
Sorry if there is allready a post about this, I couldn't find one
Cheers
Lucas
Related
Hi all
I Realise lots of this has been asked before but
I've read through the forums and there seems to be lots of it works with this and not with this!!!! help!!! Does anyone have an exact answer?
I've had and XDA1, leadtek 9532 mouse, Arkon powered mount(crap interference from the phone ), TOMTOM2 and the stereo hands free and its been a rocking system ....apart from the fact it looks like the cable monster has puked all over my dash. So I'm now about to invest in an XDA2.....fantastic apart from I now know nothing about Bluetooth.....what reciever do I want???.....what handsfree system do I want??? :?: ....and what cradle do I want???? Can the XDA2 deal with talking to the bluetooth handsfree and the gps at the same time????
Recomendations for something neat would be most appreciated. Whats the situation with charging the bluetooth GPS?, it currently takes 4 and half hours to put the cradle on the dash, plug in the xda, plug in the headset, clip on the mic, plug in the radar detector, put the face off stereo in and pick my nose. something easy would be good!!! Thx 4 ure time. M
Hi Mattw
i use an xda 2 and ttnav 2.24 with bt fortuna recieiver and a bt cellink headset. they all work fine together. the nav instructions are given from the XDA and when the phone rings the bt headset cuts in. sometimes after a phonecall i have to start ttnav agian but is still remembers the route so its no real problem.
i also have the Arkon powered mount its horrible isnt it? as soon as there is a decent powered XDA2 mount available ill get it. ( im waiting for Seido to release their looooooooooong awaited unit)
www.seidio-europe.com/ProductDetails.asp?ProductCode=BD-SMGF1XDAII
regards
The Pilgrim
navman
i have the navman with the bluetooth mouse, with the ~official~ patches from navman, and works perfect, and i have worked with a lot of sat-navs
Thanks
Thanks for you help.....Shall let you know how I get on. :?
t'ello all....
I have just bought an arkon CM532 with xda2 adaptor. This seems to do the job as a hands free kit, with the usual bugs of noisy GPRS feedback etc, but I can live with that....BUT - I need a GPS ariel that will plug into the cradle and thus the xda2.....I have tomtom software ready to go, but I dont really want a bluetooth GPS, as we all know, bluetooth and xda = hell.
Any ideas?????
Would this work from ebay?
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=3730&item=5134905894&rd=1
No idea where you got the idea that BlueTooth GPS and the XDA2 are incompatible - mine worked fine after the first O2 update was applied...
As long as you get the right cable it should be fine.
Bluetooth is more convenient, as you only need the adaptor for charging, and most journeys take less than the GPS battery life.
I use a Pretec Bluetooth GPS I bought from eBay,
works fine.
its not so much the bluetooth that puts me off, more the fact that the arkon has the ability to charge a gps receiver that is connected to it via the RJ11 socket, and I want to know which gps reciever has this RJ11 connector. Otherwise, if I go the bluetooth route, I will have 2 cigarette adapators, and only 1 cigrette lighter socket! Plus, ill forget to charge the receiver too.....
Are you sure you have a Arkon CM532 - mine has no RJ11 sockets anywhere!
What it does have are two power-only USB ports on the base - either side of the regular 5v input socket - and a 5v output on the side which feeds my Socket GPS.
I can also recommend sticky-backed velcro as a fastening medium for attaching the GPS to the side-arm of the Akron.
That said, I really dislike the Arkon - I'd much rather a dedicated until like the one made by CarComm. However, the only UK distributor are idiots.
xda2 cradle for sale
CMPC-15 Mobile PDA Cradle for XDA II / MDA II / Qtek 2020 / i-Mate
Cradle for the XDA II / MDA II / Qtek 2020 / i-Mate with original bottom connector and steady fitting for the XXDA II / MDA II / Qtek 2020 / i-Mate. Specially designed for mobile use.Charging pcb is build-in the cradle. RS-232 and PS/2 connections for connecting the PDA to for example an GPS Receiver. Also with power input connections.
Just got my new Imate PDA2K and it does not fit
£30+p+p
phone holder4
hi guys
i have this and its crap you cant hear on the speaker because of the interference from the phone i use it without the electrics.
regards kevin :evil:
its works fine as a holder and charger. as it was designed not a hands free kit
its works fine tomtom bluetooth gps sony ericsson headset
thanks all....ive gone for the tomtom 3 gps receiver.im assured that it has the relevant RJ11 connector...Ill let you all know how it goes!
On the side issue of the car kit thing, this arkon kit is pretty good I have to say, but I was always aware that it was not really a hands free car phone like those by nokia etc, and will probably jump the bluetooth headset way soon....any ideas which?
I am contemplating on getting a wired TOMTOM GPS receiver.
I read a few posts ago that a wired one would be better than bluetooth if you want to use a bleutooth headseat and a bluetooth receiver at the same time. The call disconnects?
Anyways, I just wanted to verify this before I buy the wired TOMTOM receiver from ebay.
Also, I need to know how it will connect to the XDA IIs. The websites say its SERIAL port. How do you connect a serial port to the XDA?
Also need advice on GPS as well. I have the TOMTOM 5 software and all the maps installed on the SD card. All I need is a device now.
SHould I go for bluetooth?
Should I go for wired GPS?
Which is the best brand of GPS receivers?
Would I face any problems if I operate bleutooth headseat and gps receiver at the same time?
Thank.s
No replies? Guys come on.. you must know something. TOMTOM gurus all over.
Wired GPS
Alitech
I have a wired receiver, not a TOMTOM one but one I got from Expansys. It works fine and I imagine the setup is the same as when I setup TOMTOM I had to select TOMTOM Wired receiver.
My collegue has a bluetooth receiver and I tested it outo n my phone. It worked fine but took a while to boot up (the receiver, not the phone)
The benefit that I find from the wired receiver is that it charges the phone as well. I use a bluetooth headset occasionally but due to the issues with the in-call volume going I tend to use a wired handsfree (but I'm about to upgrade the ROM to the imate one if I can find it)
Connecting to the serial port on the XDA - use the power supply port and ensure that you turn off your infrared port. this then allows you to use the COM1 port on the phone (having the IR active means that it uses the COM1 instead).
I found the receiver from Expansys fine to use and quite cheap. It has a quick warmup time and, like I said, charges the phone at the same time. My collegue with the bluetooth one can't charge the phone and the gps at the same time.
Hope this helps. My phone is the SPV M2000 btw.
So which is the best wired GPS for the XDA IIs ?
problems with wired
I have just got a wired gps for tomtom5 and i can't connect it to my spv m2000.
I have switched off ir beam done hard resets and so on but still it doesn't work. So be a little careful...other people seem to have had no trouble but something is causing trouble
Tom Tom GPS's
I bought the wired GPS with with the software from TomTom, and it works perfectly.
I also got bored and managed to wire up my XDAIIs to my Road Angel via the same RJ port as the TT wired GPS uses.
Plus, when I'm in other peoples cars, I have a generic BT GPS.
They all work as good as one another.
Ok once again, a lot of confusions.
Which is the best GPS receiver? Which one should we go for. Something that will work with the XDA IIs and fit into the charging and sync port.
Models and makes ?
Go for Wired
I currently use and XDA IIi with a wired GPS Receiver, You can purchase a good cradle at http://www.pdamods.com/products.asp?cat=23 which enables you to charge the handset and power the GPS receiver through the cradle, the GPS receiver connects via a RJ socket in the cradle. You have the option to buy the cradle and the receiver as a package for around £85 which comes complete with various mounting options. Personally i went for specialized mounting bracket called a safety clip which is completely non destructive and is available from www.brodit.com. Hope this helps.
Ok.. now I got it. So a good option would be going for a tomtom mount.
Upon research, I found this one.
http://www.pdamods.com/proddetail.asp?prod=A11XDA2SMNT&cat=23
It has the option to buy a FUZION GPS receiver with it.
I think I will go ahead and order it.
Will I need another mount of some sort? I believe the tomtom cradle is already a mount with various mounting options.
FYI: I use this:
- Rikaline GPS-6010-X5 (approx. € 70)
- Brodit active holder (approx € 60)
The holder will both charge the pda and the gps reciever. Quality of the reciever is very good.
Also FYI: I do have a bluetooth carkit from Parrot. You will find out that bluetooth on this pda means trouble, probably also with the GPS.
Can you provide any urls for these products.
cant find the broadit holder on the website.
I have the TOMTOM BT
I have no problems with my XDAIIs .... but i also dont use a BT headset ! i just use speakerphone !
I love the BT, i can take it from car to car and mountain bike
I have the xda charging on a usb car lighter socket and 1 charge of the gps lasts 4 hours - enough for my journeys ... but a car charger for this is only 6quid anyway and i can mount it in the boot!
i agree the BT is crap on this device, but i hope a rom will fix it.
Rich
I'm using a Holux GPS cradle with an Orange SPV M2000. Has some issues when you first buy it but if you look for my input on the thread you'll see how I got around it and I now use it daily in my own car and also hire cars without issue. Wouldn't say i'd recommend it wholeheartedly but if the advantages are suitable for you and you're prepared to mod it a bit it might work for you. http://www.pocketgpsworld.com/modul...opic&t=13307&postdays=0&postorder=asc&start=0
Thanks for the comment. Seems like an interesting product.
Does anyone know where I can buy the Brodit Active Cradle For GPS for the XDA IIs?
I have a Parrot BT car kit (With GPS CK3300 I think?) that works great, but I'd love to find a holder that has the ability to poer/charge the XDA.... and suggestions guys?
Cheers
Hi
Please check the link below
http://www.gpsforless.co.uk/product_details.php?id=3091
Regards
Craig
www.gpsforless.co.uk
hi I have a tomtom wired gps and a mda pro.
Is there a converter cable to use it on my mda pro? I also have an brodit cradle for a hp2210 pda it,s no problem not to use the cradle because de gps is a separate part with a rj11 connector
Simple answer to your question is 'no', bluetooth gps is the only option
more complicated answer maybe
I have seen a converter/ charger cable for a wired gps reciever (garmin)
which converts the serial output to bluetooth badnews is that its about £50 and probably cheaper to buy a conventional bluetooth enabled gps