Related
Sorry to open a new thread, but I want to ask is there any method to fix this problem apart from using Mitty?
I tried flashing LVSW 3-26 firmware using SPL 1.06 or the 1.1x, both gave me the end results of white screen.
I am newbie to Mitty and worry of bricking my device with Mitty.
Can anyone suggest what I could do to cast the white screen away?
Desperately in need of help.
Thanks
I see by the sorry for a new thread you have read
http://forum.xda-developers.com/showthread.php?t=299644
I am with you. Right now I would go to a different version. The previous LSVW or another build. I am trying the mtty thing but I am running vista and cannot get NBHextract to work.
If you do not want to risk it maybe holding off a day and checking back for an update. These guys are fast. Also like I said go to a different version. I flashed the revious LSVW os only and it worked 3 times in a row perfect
When you say white screen what do you mean?? You get a white screen and the device doesnt boot?? or the device has a white today screen?
people
for black 1.3 i will release two versions
one with SPL and OS (with RUU 3.6)
and
one with only OS using standard RUU (assuming you already have HardSPL)
this will give u an option
jasjamming said:
people
for black 1.3 i will release two versions
one with SPL and OS (with RUU 3.6)
and
one with only OS using standard RUU (assuming you already have HardSPL)
this will give u an option
Click to expand...
Click to collapse
Hell yes. Makes the guide clearer to make (i will mention the value of embedded HardSPL and radio though )
mrvanx said:
When you say white screen what do you mean?? You get a white screen and the device doesnt boot?? or the device has a white today screen?
Click to expand...
Click to collapse
The White Screen for me is i can see the HTC Flash screen, but the Windows Mobile screen becomes white without me even seeing it and the Today screen is also white also.
Also, i was wondering if using Hard-SPL might help?
Thanks
nope i am using hard spl and tried it still white screen
Me too....
I also got the white screen of death. lol.
i used the version that was posed on the main page. After the update and initial boot the white screen comes on.
I was able to bypass this after several resets. Then it will start the customisation process. After which it will restart and go to a white today screen with no icons. I do have the task bars at top and bottom but no dialer.
My fix. I went and dl RUU_HER_6.20.100.0_0.00.00.00_XDA_WWE_XBOW_Custom. I installed it and works like it did before.
I will wait till there is a fix for this...
BTW I have a cingular 8525
I WANT TO OFER YOU GUYS SOMTHING
those of you who got white screen do you have language on boot?
i mean do you have diffrent language pack that need to be boot when you make hard reset?
cause i notice that when my language pack boot with new rom igot
white screen the language pack stuck it
then i remove my language pack from booting then its ok!!
After 1 whole day 24 hours non-stop fidgetting with my device, still NO LUCK...
Flashed it so many times, but still white screen.
Anyone can help me out?
Thanks
HKFreak said:
After 1 whole day 24 hours non-stop fidgetting with my device, still NO LUCK...
Flashed it so many times, but still white screen.
Anyone can help me out?
Thanks
Click to expand...
Click to collapse
Think this should help, I did cut the quote down a bit.
mxlaser said:
After hours and sleepless night, and so many flashes i think the NAND in my dopod was hot enough to fry a breaky for me, i've come to the comclusion, i have 100%, no issue success with all ROMS, using 1.01MFG and MTTY flashing each part seperatly. Not one time has a white screen appeared, with ANY rom, and i've tested all the current WM6 roms.
I d/l'd and tried the latest LVSW rom (26/3) and have exactly the same issue when using the packaged RUU to install it. However, when i use MTTY, its perfect every time.
I would suggest the following steps
1. Load into the bootloader mode (HOLD POWER/OK buttons and press soft reset)
2. Flash SPL-1.01MFG onto your device (Read wiki info and file links here)
3. Once flashed, reboot and do step one again to get back into boot mode. You should now see your boot as 1.01MFG
4. Use NBHextract to extract 06_OS.nb file from RUU_signed.nbh file found in downloaded rom package.
5. Load up MTTY, follow steps in the wiki for the 1.01MFG on how to flash OS.nb (OS.nb is the 06_OS.nb file renamed to make it easier)
6. Once flash is complete, the latest rom is installed and you won't have a white screen
7. Now flash Hard SPL v4 onto your devic for safety reasons.
And this fix is EASY to do, 100% works every time.
Click to expand...
Click to collapse
It worked 100% for me first time.
Just for the record I used ROMbaker to get the 06_os.nb then just rename it to os.nb.
Also if you are not sure and feel nervous about bricking it, then just wait for a proper fix.
Finally I got the white screen a few times and everytime I flashed the previous LSVW os only the device worked perfect. From my reading Olipro may have found the problem haveing to do with bad blocks. Nothing major but I believe they are working on it currently.
If you follow these directions and install 1.01MFG, you can BRICK YOUR DEVICE with ANY mistake!
We're not talking about a brick that can be fixed either. You precious phone will become a paper-weight forever more! Really.
I DON'T CARE WHAT THE N00BS ON HERE SAY; FLASHING 1.01MFG IS **NOT** A RECOMMENDED WAY TO FIX THIS PROBLEM! DO NOT INSTALL 1.01MFG UNLESS YOU ARE OK WITH THE CHANCE THAT YOUR PHONE WILL BE BROKEN FOREVER!!
bubu23 said:
I WANT TO OFER YOU GUYS SOMTHING
those of you who got white screen do you have language on boot?
i mean do you have diffrent language pack that need to be boot when you make hard reset?
cause i notice that when my language pack boot with new rom igot
white screen the language pack stuck it
then i remove my language pack from booting then its ok!!
Click to expand...
Click to collapse
No, I have never installed any language packs on my phone. I use good ol' english.
HKFreak said:
After 1 whole day 24 hours non-stop fidgetting with my device, still NO LUCK...
Flashed it so many times, but still white screen.
Anyone can help me out?
Thanks
Click to expand...
Click to collapse
Just go back to a previous version of WM6.
It only takes several minutes to put back XDA- Live.
mzahiri said:
Just go back to a previous version of WM6.
It only takes several minutes to put back XDA- Live.
Click to expand...
Click to collapse
I tried going back to WM5 firmware.
Flashing the firmware is a success but I still got the white-screen-of-death.
Any other options?
Thanks
SPL-1.35.Olipro will be released shortly; this should address the issue of the whitescreen error, all those having problems under 1.30 should no longer encounter it if they were able to flash fine with old SPL's
Olipro said:
SPL-1.35.Olipro will be released shortly; this should address the issue of the whitescreen error, all those having problems under 1.30 should no longer encounter it if they were able to flash fine with old SPL's
Click to expand...
Click to collapse
Go Oli Go!
Question ?
Hi All,
Sorry N00b alert at this .. but very IT literate
Just a quick question off the cuff, what was the last(est) version (can you provide a link) that i can flash to now .. (not mucking around seperating stuff etc) that wont give me the white screen issue.
I am currently sitting on LSVW 25/3 1.38.10 radio and 1.13oli
Thanx test
Hi everyone!
Using tools found in Buzzdev's site, I tried to change the splashscreen on my Uni, but something failed. I tried it 3-4 times with correct images (480x640 bitmap 24bit converted in rsb) but after telling me that the update is made, it makes a soft reset and the image that appears is completely messed up!
Also, before making this thing, it remained in the blank initial screen for 1-2 seconds, now it stays there for 15 seconds!!! Everytime I make a SR I fear that it's bricked!!!
Any help is very appreciated...
Auzman said:
Hi everyone!
Using tools found in Buzzdev's site, I tried to change the splashscreen on my Uni, but something failed. I tried it 3-4 times with correct images (480x640 bitmap 24bit converted in rsb) but after telling me that the update is made, it makes a soft reset and the image that appears is completely messed up!
Also, before making this thing, it remained in the blank initial screen for 1-2 seconds, now it stays there for 15 seconds!!! Everytime I make a SR I fear that it's bricked!!!
Any help is very appreciated...
Click to expand...
Click to collapse
Please use the SEARCH button: http://forum.xda-developers.com/showthread.php?t=252720&highlight=splash+screen
have you voted?
Good luck,
Take a look over here:
http://forum.xda-developers.com/showthread.php?t=399403&highlight=bootscreen
I read everything in those 3ds but nothing helped me.
I tried 2 more times to change the splashscreen and I obtained another messed up image, but now the blank screen has a normal behavior: it appears for 2 seconds.
Even if I haven't received error messages I tried to install rapi.cab and SdkCerts.cab, but nothing changed. Trying to install htc_certs it says that it has to unistall the previous customization tools. Have I to continue uninstalling?
Another question: I didn't entered in bootloader mode, was I supposed to?
In edit:
@orb3000: oh yeah, I voted long time ago for our great Uni!
I add another thing: when Uni boots the image is totally messed up, but when I try to flash another image the backup is correct!
I tried to install htc_certs, but nothing changed, except that now it takes more time to boot...
Ok, here are the news:
I found this post that took me to this one.
According to Tomal's instructions, I tried to remove the first 28 byte from the .rsb header, but no program could open it, due to missing header.
I tried to change the initial offset from the batch file (without editing the .rsb file) but nothing changed, same messed up image on boot.
So question is: what am I supposed to do now? Install a rom with a different splashscreen, edit qhat I want and then revert to Tomal's rom? Seems too long to do!
Auzman said:
Ok, here are the news:
I found this post that took me to this one.
According to Tomal's instructions, I tried to remove the first 28 byte from the .rsb header, but no program could open it, due to missing header.
I tried to change the initial offset from the batch file (without editing the .rsb file) but nothing changed, same messed up image on boot.
So question is: what am I supposed to do now? Install a rom with a different splashscreen, edit qhat I want and then revert to Tomal's rom? Seems too long to do!
Click to expand...
Click to collapse
As far as I know you don´t have to reflash a ROM to have a new splash screen.
When I change mine just made a hard reset and voila! my new splash was there with the same ROM I was using
Good luck,
Nope.
That didn't work for me...
Any other idea?
Ok, half fixed everything.
I tried to flash my Uni with a Rom without flash disk and with a new splash screen. I used this one.
Obviously, flashing went wrong and my uni was stuck in the boot screen with a brand new splash screen! Now, I got a new splash screen with a bricked Uni...
Uff...
So I tried to enter boot loader. It did. Tried to install Tomal's 8.5, but again I obtained a bricked Uni.
I used mtty to format DOC and everything worked.
Then I installed again Tomal's 8.2 and my Uni is now working again.
But formatting DOC erased also splash screen!
So I don't have a splash screen at all.
Now, looking back I suppose that next time my ego will try to tell me that a wonderful brand new splash screen would bring my Uni to another level of power, I'll take one finger of mine and close it in the first door I find... That would solve everything.
Auzman said:
Ok, half fixed everything.
I tried to flash my Uni with a Rom without flash disk and with a new splash screen. I used this one.
Obviously, flashing went wrong and my uni was stuck in the boot screen with a brand new splash screen! Now, I got a new splash screen with a bricked Uni...
Uff...
So I tried to enter boot loader. It did. Tried to install Tomal's 8.5, but again I obtained a bricked Uni.
I used mtty to format DOC and everything worked.
Then I installed again Tomal's 8.2 and my Uni is now working again.
But formatting DOC erased also splash screen!
So I don't have a splash screen at all.
Now, looking back I suppose that next time my ego will try to tell me that a wonderful brand new splash screen would bring my Uni to another level of power, I'll take one finger of mine and close it in the first door I find... That would solve everything.
Click to expand...
Click to collapse
OK, send me your splash screen.
I'll prepare it for you.
tomal said:
OK, send me your splash screen.
I'll prepare it for you.
Click to expand...
Click to collapse
Tomal, you're great!
My idea was to use the splashscreen attached, but I was also wondering what is necessary to do for install it into a nk.nbf file.
You said that the header (the first 28 byte) has to be removed, then the .rsb file has to be inserted on the address 0x3f00000, but this is the (absolute?) address on the Uni memory, I don't know how it is managed on the .nbf file...
So, if I convert to .bin (or something like it) the .nbf file and with an hex editor I insert on the correct address the image everything should be fine?
My next question is: how the upgrade utility decides to update or not the splashscreen? Seems that something other has to be changed...
That's one of my screens, it's ready for flashing as you can see here:
http://forum.xda-developers.com/showthread.php?t=399403&highlight=bootscreen
Win_XP said:
That's one of my screens, it's ready for flashing as you can see here:
http://forum.xda-developers.com/showthread.php?t=399403&highlight=bootscreen
Click to expand...
Click to collapse
Infact I took it from yours!
But, as specified in the other posts, with Tomal's rom seems impossible to use the standard procedure...
Perhaps the only way is to insert the splash screen directly in the rom and flash everything at once.
Auzman said:
Infact I took it from yours!
But, as specified in the other posts, with Tomal's rom seems impossible to use the standard procedure...
Perhaps the only way is to insert the splash screen directly in the rom and flash everything at once.
Click to expand...
Click to collapse
ok, here it is.
Connect the device in activesync and run splash.exe
cheers
Nope, doesn't work. I have the same wonderful fully black splash screen...
Tomal, there's no problem, it's good as it is, don't go crazy for it!
And thank you again for your great support!
Auzman said:
Nope, doesn't work. I have the same wonderful fully black splash screen...
Tomal, there's no problem, it's good as it is, don't go crazy for it!
And thank you again for your great support!
Click to expand...
Click to collapse
Nope, don't be upset. I have another way. But you need to consider a HR, so do a backup before start.
Attached you'll find the splash and flashing tools. nk.nbf only contains the splash so your rom will be untouched.
Burn the splash in the regular way...
Once again, nothing good...
I used your last method, flashed the splashscreen, only soft-reset the device, the splashscreen appeared correctly, but it didn't boot.
So, I flashed your 8.5 standard (the special one has rltoday, but I don't like it so much...) and correctly finished the procedure. Once again, device didn't boot.
Used mty, format DOC, flashed again and now it works... Without splashscreen!
So, according to me the only way to restore a splashscreen on my device is to flash another rom which doesn't use flashdisk, change bootscreen and flash back to yours (for me is the best).
Too hard for me: flashing device contains a little danger every time you do it. It's time to leave my Uni with a rom for more than 3 days!!!
Tomal, once again, thank you for your support!!!!!!
Hi everyone well I'm new to the flashing and dont want to jump any steps as this could possible brick my phone...
I've been having some problems with flashing as i cant find a step by step to flashing my HTC TP2. I've managed to do the RhodiumW Hard-SPL package but after trying to flash to some custom RUU's the installation seems to go fine its not until the phone first boots up, that's when the phone just hangs on the HTC splash screen
From there i cant do anything other then boot up to the tricolor bootloader screen and re-install the original 2.04.651.4 update!
can someone tell me what im missing to be able to flash my HTC correctly, or at least point me in the right direction?
Thank you in advance!!!
step 1
http://member.america.htc.com/download/RomCode/HTC Touch Pro2 (Sprint)/HTC Touch PRO2 MR1.exe
step 2
http://rhodiumw.htc-unlocks.com/hard-spl.php
step 3
http://www.mightyrom.com/mightyrom/touch-pro-2/
Hey Tommy many thanks for the post. I just upgraded my phone and peeling through the information overload, however you direct link does not work for step 1. I want to make sure that I am running the correct piece of software that you recommending. Could you please list the title for that file?
Nevermind I was able to find it via a mirror site.
Back into lurker status for now
Thanks
alright so i was able to install they mightyrom on my phone that went well my phone didnt freeze and everything started the way it should have.
but does that mean i can now flash my phone to other for example "leo cell" or Bxsteez Rhodium" if not how do i get to that point cuz when ever i flas them to they just freese on the white splash screen with the HTC logo in green letters!!
Thanks!
If you have installed Hard SPL then use the sd card method.
1. Format the sd card FAT32 ( they come FAT default) and copy the rom's .nbh file onto it. Rename to Rhodimg.nbh .
2. Insert sd card back into powered off Rhodium. Go into bootloader by pushing down volume and power.
3. If you did it properly and Hard SPL is on your phone then it should say to press power to update os...
If you aren't sure if you have Hard SPL then go to bootloader without the sd card in there, it should say SPL - 0.85.Olinex if you have Hard SPL, anything else won't register the flash file.
Cheers...
OK I was able to update to Winmo 6.5 with no issues....but here is my questions with regards to the Rhodium_W Hard-SPL
I was attempting to run it and it never gets pass 0%...In reading the details of the install instructions it reads
"the device needs to be connected to Activesync or WMDC via USB cable. and it must not be in Flight/Airplane mode (i.e. the phone part should be on).
3) internet access is required as the program checks online for updates and for the license."
Click to expand...
Click to collapse
I have yet to activate my phone with Sprint could this be my error that I need to active my phone? I wanted to have the phone flashed and customized before activating.
signalsoldier said:
OK I was able to update to Winmo 6.5 with no issues....but here is my questions with regards to the Rhodium_W Hard-SPL
I was attempting to run it and it never gets pass 0%...In reading the details of the install instructions it reads
I have yet to activate my phone with Sprint could this be my error that I need to active my phone? I wanted to have the phone flashed and customized before activating.
Click to expand...
Click to collapse
I think you should ask this in the hard spl thread in the cmda section...That is the place for those questions Assuming that you have a cdma phone because you did not mention it. Otherwise check the hard spl thread in the gsm section.
Heading that way thanks for the directions mate!
Alright so ive been able to flash my rom to my first custom rom by energy which i like very much, although still a noob, i want to flash it to a different rom
What is the best way to flash to a different rom with out leaving any files behind that would affect the new rom?!
do i have to do a hard reset or something that would clear my phone from any old files?!
htcru7 said:
Alright so ive been able to flash my rom to my first custom rom by energy which i like very much, although still a noob, i want to flash it to a different rom
What is the best way to flash to a different rom with out leaving any files behind that would affect the new rom?!
do i have to do a hard reset or something that would clear my phone from any old files?!
Click to expand...
Click to collapse
Just flash away
LOL alright thanks i guess im just paranoid but thanks i'll "flash away"
Lock
When you start Rhodium_CDMA_HardSPL_V1_10R3_100HSPL stoppers on 0%.
I removed the firmware via mtty 1.42 entering the command: task 28 \ task 29. Ie fully formatnul system. This is often applied to remove the lock on the HTC 6800. At this time nothing worked. Under bootloger any firmware stoppers on 0%. Besides, even the official RUU_Rhodium_W_S2_Sprint_WWE_2.04.651.4_RS_2.32.00WF_NV_SPCS_2.20_0224_PRL60660_S
hip
and HTC Touch PRO2 MR1 from the official portal hangs at 1%, then is restarted Device, and as expected if there is no OSes lit logo HTC ...
What should I do?? If GSM is blocked, how do I remove it to flash?
Ps Is it possible to disable the lock on the firmware via mtty
1.42??
Thank you very much for your answer!
Scream-krg said:
When you start Rhodium_CDMA_HardSPL_V1_10R3_100HSPL stoppers on 0%.
I removed the firmware via mtty 1.42 entering the command: task 28 \ task 29. Ie fully formatnul system. This is often applied to remove the lock on the HTC 6800. At this time nothing worked. Under bootloger any firmware stoppers on 0%. Besides, even the official RUU_Rhodium_W_S2_Sprint_WWE_2.04.651.4_RS_2.32.00WF_NV_SPCS_2.20_0224_PRL60660_S
hip
and HTC Touch PRO2 MR1 from the official portal hangs at 1%, then is restarted Device, and as expected if there is no OSes lit logo HTC ...
What should I do?? If GSM is blocked, how do I remove it to flash?
Ps Is it possible to disable the lock on the firmware via mtty
1.42??
Thank you very much for your answer!
Click to expand...
Click to collapse
the Hard-SPL will only work if you booted windows mobile. you have to sync the phone in windows mobile to the PC.
is there other way to get through in hard spl because i dont have any account for example, paypal...... http://media.xda-developers.com/images/icons/icon9.gif
chrisjavier666 said:
is there other way to get through in hard spl because i dont have any account for example, paypal......
Click to expand...
Click to collapse
Hard SPL is free for non-commercial users.
my tp2 is bricked
i tried to upgrade my htc touch pro 2's rom. i received error 226 and anytime i switch it on, it gets to the tricolor boot and displays a lot of info and says try again. Can anyone please help me?
nastyrock said:
i tried to upgrade my htc touch pro 2's rom. i received error 226 and anytime i switch it on, it gets to the tricolor boot and displays a lot of info and says try again. Can anyone please help me?
Click to expand...
Click to collapse
Did you try flashing the stock ROM? It's always a good idea to try that if you think there's no hope. It flashes everything.
Also, did you try task29?
I have flashed my at&t tilt 2 with core cell evo v1.2 & it was working fine for awhile but now my screen is just black i can hear the phone make sounds and all but can't see the screen at all i really need help fixing this as this is the only phone i have any help or suggestions will be greatly appreciated thanks in advance.
i may be wrong but from what u have described... ur having a Sleep of Death (SOD) problem. have u tried takin out the battery or soft reseting the phone?
heres a link to a potential problem solver. Try to stay away from CHT lock and auto update apps!
sagarc88 said:
i may be wrong but from what u have described... ur having a Sleep of Death (SOD) problem. have u tried takin out the battery or soft reseting the phone?
Click to expand...
Click to collapse
yes i have done both and after the phone reboots i can hear sounds but i am still unable to see anything on the screen
Edit - I take that back, if it's still not working after a reboot
Have you tried entering the bootloader and re-flashing with the stock ROM?
If you can't see anything at all on the screen, no splash screens etc, even after soft-reset or entering the bootloader, then it sounds like you have a hardware problem (screen failure).
steviewevie said:
If you can't see anything at all on the screen, no splash screens etc, even after soft-reset or entering the bootloader, then it sounds like you have a hardware problem (screen failure).
Click to expand...
Click to collapse
i can't even tell if i can enter the bootloader screen because i can't see anything on the screen is there any way to tell if it's in the bootloader screen without being able to see the screen at all & if i do have a hardware problem (screen failure) how can i put stock spl & stock rom back on the phone to get it serviced
steviewevie said:
Edit - I take that back, if it's still not working after a reboot
Click to expand...
Click to collapse
if its still not working after a reboot then what? please help me i need a solution to fix this because if i can't even fix this how can i even send it in to get fixed i won't be able to because it has been flashed & has hardspl on it
"PLEASE HELP"
It's a tricky situation. So if you hold down Volume Down (and keep it held down) and press the reset button, then you still don't have anything come up on the screen ?
How about if you try a hard reset, does anything come up then ? You can hear the phone making sounds, so it seems like it's just the screen ?
Putting the charger in doesn't help, does it ?
You could try flashing a stock ROM from SD card and seeing what happens.
You might well have to send it back under warranty with HardSPL still on. In that case, if it was me, then if they tried to say the warranty was void just because of HardSPL I would argue very strongly against that and ask them to prove it - e.g. how can HardSPL stop your screen working ? I don't know what country you're in, but in the UK I think our consumer protection laws would have something to say about that.
steviewevie said:
It's a tricky situation. So if you hold down Volume Down (and keep it held down) and press the reset button, then you still don't have anything come up on the screen ?
How about if you try a hard reset, does anything come up then ? You can hear the phone making sounds, so it seems like it's just the screen ?
Putting the charger in doesn't help, does it ?
You could try flashing a stock ROM from SD card and seeing what happens.
You might well have to send it back under warranty with HardSPL still on. In that case, if it was me, then if they tried to say the warranty was void just because of HardSPL I would argue very strongly against that and ask them to prove it - e.g. how can HardSPL stop your screen working ? I don't know what country you're in, but in the UK I think our consumer protection laws would have something to say about that.
Click to expand...
Click to collapse
how can i flash anything if i can't see the screen?
Doo Doo said:
how can i flash anything if i can't see the scrren?
Click to expand...
Click to collapse
I've never flashed via SD, so I could be wrong on this. But I thought it was still possible. I see that the instructions (in the sticky on flashing ROMs) say to put it into the bootloader and "follow the on-screen instructions". I wonder if it's possible to just wait for a while and then press the appropriate key ? Though I don't know what the "appropriate key" is.
Perhaps someone who has flashed via SD can comment further, e.g. as to whether it's possible to do this without seeing the screen ?
steviewevie said:
I've never flashed via SD, so I could be wrong on this. But I thought it was still possible. I see that the instructions (in the sticky on flashing ROMs) say to put it into the bootloader and "follow the on-screen instructions". I wonder if it's possible to just wait for a while and then press the appropriate key ? Though I don't know what the "appropriate key" is.
Perhaps someone who has flashed via SD can comment further, e.g. as to whether it's possible to do this without seeing the screen ?
Click to expand...
Click to collapse
man i really need to fix this maybe you can ask around for me since i'm new here & really don't know anybody on this board
I know it's frustrating, I'd be kinda worried if I had an apparently-non-working screen too. But please be patient, and wait for more people to see your posting. The folks in the US will be coming online around this sort of time, so there will be more people looking in and hopefully someone can help further.
Flash without seeing the screen
Enter boot loader even if you can not see the screen. You can flash your phone to stock then enter boot loader again and hard spl. I had a similar situation and was able to complete the process and warranty repair with AT&T no problems, or you can pay to have it fixed at an outside shop. I was quoted 150 and refused to spend that muck so I flashed the phone without seeing the screen...
I saw your post over on Sergio's thread but decided to answer you here.
You do have a blown screen, no doubt there. How that happened is not really relevant.
My best advise is to connect your phone to your PC and wait for the activesync connection to come up. Once that happens you know you have a good connection and can flash. Run the RUU (or exe) for your stock ROM, the on screen (PC Screen) prompts will let you know if it can't proceed. Once the stock ROM is back on it, follow the same procedure and put the stock SPL back. Then send it off to get the screen replaced.
Hope that helps
Russ
Russ741 said:
I saw your post over on Sergio's thread but decided to answer you here.
You do have a blown screen, no doubt there. How that happened is not really relevant.
My best advise is to connect your phone to your PC and wait for the activesync connection to come up. Once that happens you know you have a good connection and can flash. Run the RUU (or exe) for your stock ROM, the on screen (PC Screen) prompts will let you know if it can't proceed. Once the stock ROM is back on it, follow the same procedure and put the stock SPL back. Then send it off to get the screen replaced.
Hope that helps
Russ
Click to expand...
Click to collapse
well when i plug my phone to the computer activesync is not popping up what can i do to get activesync to recognize my phone
can somebody please help me i need to reflash my phone but i am unable to see anything on my screen when i plug it up to my computer activesync is not working so what can i do please i really need help with this
Flashing witout screen
Step 1
Enter boot loader mode (* Remove the back cover from the phone.
* Hold the Volume Down button.
* Use the stylus to press the reset hole.
* Or if the device was powered off, press the power button whilst holding down the Volume Down button.)
and attach to computer. (wait 30 to 60 seconds)
Step 2
Check device manager for HTC mobile sync under mobile devices.(Active sync will not work in boot loader mode)
Step 3
Flash using Rhodium CustomRUU on your PC. (use original ROM from At&T.
Step 4 repeat for Radio
Step 5 Use Stock_SPL_Restore_087.zip from http://forum.xda-developers.com/showthread.php?t=550131 repeat the process with it.
This should work it did for me. Let me know if you run into problems.
So i was trying to root my phone and now i won't start, can't even go to bootloader menu or so. when i'm pressing the power up button its just flashes and then shuts down. It loops so frequently that even my pc won't recognize it. What i did to the phone is this:
//androidforums.com/wildfire-s-all-things-root/502772-guide-how-update-htc-wildfire-s-marvel-a510e-gsm-software-version-2-3-5-a.html
i tried to flash a new 2.3.5 to it but now it wont do anything.
Is there any ways to fix this or should i just send this to graveyard :good:
a bit more info plz
alemale said:
So i was trying to root my phone and now i won't start, can't even go to bootloader menu or so. when i'm pressing the power up button its just flashes and then shuts down. It loops so frequently that even my pc won't recognize it. What i did to the phone is this:
//androidforums.com/wildfire-s-all-things-root/502772-guide-how-update-htc-wildfire-s-marvel-a510e-gsm-software-version-2-3-5-a.html
i tried to flash a new 2.3.5 to it but now it wont do anything.
Is there any ways to fix this or should i just send this to graveyard :good:
Click to expand...
Click to collapse
I think you might have soft bricked your phone. Search the forum how to unbrick a soft-bricked phone. That might help
Are you positive that your WFS is GSM -marvel-a510e ?
Also ,Could you be a bit more specific about what happens when you try to go to boot-loader mode or when you try to boot it.
As in the provided link, did you have to perform procedure 3 or did you perform procedure 2 and was it working? A bit more info about what you did could help others analyze the issue
rishr4 said:
I think you might have soft bricked your phone. Search the forum how to unbrick a soft-bricked phone. That might help
Are you positive that your WFS is GSM -marvel-a510e ?
Also ,Could you be a bit more specific about what happens when you try to go to boot-loader mode or when you try to boot it.
As in the provided link, did you have to perform procedure 3 or did you perform procedure 2 and was it working? A bit more info about what you did could help others analyze the issue
Click to expand...
Click to collapse
At the link i did the procedure 1 because my phone couldn't update to 2.3.5 so i tried to update it that way.
when i start the phone it just flashes it's screen and then goes off. it doesn't show htc logo or anything it just flashes some pixels. the loop is so frequent that it happens in 3 sec. Even if i try to start the phone by pressing "volume -" key and "power" key it does same thing, just loops every 3 sec.
I have tried to find a way to fix this but it seem that there is nothing to do because i can't boot to recovery. Is there a way to put the phone to recovery in other way or is here a way to make factory install?
It's really hard to do anything to this phone because my pc won't recognize it in any possible ways and it won't boot to recovery mode.
Do anyone know if i split the phone in to pieces and then manage to boot it or find the system memory and change files in there.
alemale said:
At the link i did the procedure 1 because my phone couldn't update to 2.3.5 so i tried to update it that way.
when i start the phone it just flashes it's screen and then goes off. it doesn't show htc logo or anything it just flashes some pixels. the loop is so frequent that it happens in 3 sec. Even if i try to start the phone by pressing "volume -" key and "power" key it does same thing, just loops every 3 sec.
I have tried to find a way to fix this but it seem that there is nothing to do because i can't boot to recovery. Is there a way to put the phone to recovery in other way or is here a way to make factory install?
It's really hard to do anything to this phone because my pc won't recognize it in any possible ways and it won't boot to recovery mode.
Do anyone know if i split the phone in to pieces and then manage to boot it or find the system memory and change files in there.
Click to expand...
Click to collapse
Even if you want to unbrick the device using back-toback tool , you need to enter the boot-loader mode.
Even for other ways, still it needs to be detected by the PC so that we can pass commands using ADB.
Sorry Dude, I can't help much either I am new to this myself. But i hope somebody here will definitely help you
2. There is a possibility that you could "brick" or bootloop your phone. There are two types of brick: soft (recoverable) and hard (non-recoverable). With a soft brick, the phone will not boot or keeps rebooting ("bootloop"), but it can be started in bootloader mode which allows repair of the ROM. With a hard brick, the phone won't even boot into bootloader after holding the power button for 10 seconds and the phone must be returned to HTC for service.
Click to expand...
Click to collapse
Have you unlocked your Boot-Loader from HTC Dev? Also, you need to install a recovery tool in order to boot into recovery. If you have done only the steps mentioned in the
PROCEDURE 1
Click to expand...
Click to collapse
then you haven't unlocked the boot loader and no recovery is also installed (I believe) . In this case, I think this is a hard-brick(Correct me if am wrong) which is impossible to recover . Anyways, we shall await other replies from DEVs here in the Forum.
rishr4 said:
Even if you want to unbrick the device using back-toback tool , you need to enter the boot-loader mode.
Even for other ways, still it needs to be detected by the PC so that we can pass commands using ADB.
Sorry Dude, I can't help much either I am new to this myself. But i hope somebody here will definitely help you
Have you unlocked your Boot-Loader from HTC Dev? Also, you need to install a recovery tool in order to boot into recovery. If you have done only the steps mentioned in the then you haven't unlocked the boot loader and no recovery is also installed (I believe) . In this case, I think this is a hard-brick(Correct me if am wrong) which is impossible to recover . Anyways, we shall await other replies from DEVs here in the Forum.
Click to expand...
Click to collapse
I tried to unlock the bootloader but it wanted 2.3.5 so i tried to install the new version. now it can't do anything. Well this didn't broke my heart because the phone is pretty worthless . now i have to buy new phone sooner than i planned but still all help is still accepted.
Hi, exactly the same for me : I bought the phone 2 years ago and immediately unbranded it with a goldcard, but never tried to unlock it because it was my wife's and I didn't want to risk anything.
Now she got a new phone, I wanted to play a little with the Wildfire S ^^.
In order to unlock the phone on htcdev I had to update it from 2.13.401.2 to 2.13.401.3, with RUU because can't update with OTA (different CID), with goldcard inside.
After the RUU finished, it says "congratulations everything went well", but actually the phone does not boot, stocked in a loop "quick flash / turns off", can't access bootloader, no USB detection for ADB.
Can't send it to HTC because the 2 years warranty is expired, how ironic ! :laugh:
So... if anyone does know or see any trick that could help to boot anything on this "seems to be hard-bricked" kid... huge thanks to you