Related
NEED HELP!!!!
i was trying to upgrade my xda IIs to
"ba_o2asia_14000_923_11200_ship (1.40.00)",
then when it comes to the third part "windows ce" it wont continue.
ived tried everthing like uninstalling and installing the active sync, reboot the pc and soft reset the unit.......
now all that appers on my screen is "USB, v2.07" and i cant use my unit.....
plus when i click connect in active sync on my desktop it wont detect my device.
HELP ASAP!!!
Try a Hard Reset
Try a Hard Reset, Power button + Reset hole at the same time, if it doesnt work after that you need to try again from the begining. try the BA for beginers WIKI http://wiki.xda-developers.com and look for someone with the same device as you in the same country in the forums, check what ROMs they are using in there Sig in order to find the most suitable ROM to try and install that one..
Having said this i am not an expert buy any means, but this is what I have done.
After I just installed my new Radio Rom this morning I was prompted to hard reset, I'm sure this is what you have to do affter a full ROM update, good luck.
The v2.07 dosnt mean youve ruined it so keep trying.. :wink:
i was installing new rom on my device.when it was 12%, the computer got locked and i had to reset.Now,my baby did not reflash again.i tried again but himaupragadeutility gave : communication problem. what can i do now? can anyone help me? so a few people know this device, the others even do not know what pda is. what i can do?????????????????????????????
keep on doing a hard reset until you reach bootloader mode. from there try upgrading again. were you upgrading to 2003se or wm2005?
i was installing the rom from 02 web site
i was installing the rom from the 02 web site.i had tried but it did not open boatloader.what i can i do?
anything showing on your xda screen? if it's blank then you have to continue doing hard resets. a buddy of mine had the same problem and he was able to bring it back to bootloader mode after 10 or so hard resets.
if something is showing on the screen (like "usb version...something") then this is already bootloader mode. what you do is put the xda back on the cradle but don't expect activesync to recognize it. just put it back on the cradle and then rerun the upgrade.
hope it works.
rob
there is only o2 logo on the device,i tried hard reset but it did not open boatloader
hi hope someone can help me.i tried updati ng my xda exec after downloading the rom update from o2, and now my pc doesnt recognise the xda and my xda doesnt start its gone completely bank.i tried holding the softkeys and pressing the reset button, it says hit 0 to get back to factory settings and nothing happens........please it looks like my phones gone comatose
Moved to Uni Upgrade forum form Upgrade general
i believe u r stuck in bootloader
hi
try the following
disable usb connection from connection settings in active sync
then re upgrade the rom , and when you reach the screen where it tells u the rom version (it wont tell u this time) u ll HAVE to wait for few seconds before pressing "upgrade" , hopefully it will work this time
good luck
hi
hi there, i tried upgrading my 02 xda executive from the software update on O2 website.my active sync 4.1 stopped working in midst and my xda is nt working now.and my pc isnt recognising the xda. the xda isnt starting up its completely dead.I tried hitting the 2 softkeys and the soft reset button and the screen lights up and it says to rollback to factory setting hit 0 zero, but nothing happens................plz help would be appreciated.http://www.my-xda.com/xdaExecSoftware.jsp
also the screen now has USB and v1.00 over it and shows nothing but this and not starting up and my pc pops a message up saying that an unknown usb device and cant be connected
Does anybody have a solution to the above problem as I now have 2 xda execs in the same situation. It's a bloody nightmare! I understand it's in bootloader mode. Just don't know how to get the xda up and running again without sending it off to O2...
Please help!
LOOK HERE I have been in this situation myself a couple of times. Personally I use method 2 which is at the bottom of the page as it's very easy to follow. I suggest you try this method first.
Regards,
Psi
Those of you having trouble after a Rom Flash. If it goes wrong, start by pressing THE BACKLIGHT BUTTON, THE POWER BUTTON AND PRESS IN TO THE SOFT RESET HOLE ALL at the same time. This should put you back into BOOTLOADER. Then try your rom flash again. If the WM6 fails I re-flashed with the O2 EXEC WM5 first. Forget Active Synch saying it cant etc.
Providing you can just see some very faint words then you are back in bootloader. I have got the original O2 XDA EXEC WM5 Rom files so if you want them, as I can not find out how to put a large zip file on here then I can email it to you. Let me know on
[email protected]
pls i need it send to [email protected]
I follow instruction in http://forum.xda-developers.com/showthread.php?t=313486 but after hardreset.
My p800w is stuck in T-Mobile logo and version number. It can't continue booting up to windows mobile.
Question: How to flash ROM without ActiveSync?
How to recovery my Artemis?
Welcome any advice,
Thanks in advance.
Yea me to, mine is now a brick after that upgrade? No active sync connection possible and all I get now is the blue O2 start screen after the hard reset with the red writing and numbers in the top left hand corner..
Phone is an UK XDA Orbit
IPL 1.25.0001
SPL 1.11.0000
GSM 02.67.90
OS 3.4.0.0
HELP!!!!!!!
yeah, I had the same problem and have created a thread for it already. unfortunately I got no useful replies, and it seems that I am stuck waiting for an official o2 ROM so that I can recover my Orbit.
It seems there is a way to un brick our phones I just need to get my phone bootted into bootlader mode which no one seems to say how to do??
Can anyone help how I can boot my Orbit , like what combo of keys I need to press to boot it into bootloader mode then XP will see it at a driver level apparently Active Sync still won;t but I will be able to run some German ROM update with the ROM file replaced with the other ones and it may come back to life..
Help how can I boot my phoen in bootloader mode???
motomob said:
It seems there is a way to un brick our phones I just need to get my phone bootted into bootlader mode which no one seems to say how to do??
Can anyone help how I can boot my Orbit , like what combo of keys I need to press to boot it into bootloader mode then XP will see it at a driver level apparently Active Sync still won;t but I will be able to run some German ROM update with the ROM file replaced with the other ones and it may come back to life..
Help how can I boot my phoen in bootloader mode???
Click to expand...
Click to collapse
I read in here that you hold the voice button and soft reset.
Decaf said:
I read in here that you hold the voice button and soft reset.
Click to expand...
Click to collapse
Correct and use mtty
Already see in the forum ....
Thanks guys and apologies for the spelling..I ran the Artemis_USPL before I tried upgrading to WM6 and again have been able to run it after with my new brick now with the phone in bootloader mode but still when I try and run the german ROM update a) it will only work with the german file which freezes @ 3%? This seems to be a known problem reading around and b )when I replace it with the smaller ROM file, 54MB the german one is 66MB, I originally tried to use it doesn't read the ROM file or the update utility doesn't want to read it. I reckon I might be able to get it back if I can get one of the ROM update utilities to read a good ROm file and send it to the phone.
I can;t find this MTTY program to sniff the USB port and return the code of if the USPL util wokred as I think that could be key to all of this.
Can anyone post a quick how to here for
1) install MTTY from somewhere
2) what command to run agaist the phoen to see if the USPL util worked and what values I should be looking for
3) another WM6 ROM version (that the update utils can read) download location I can download from to try and send to the phone using the German update util
Not asking for much am I but I desperately need my phone back WM5 or 6 in the next day or so so really can't send it off.
Thanks
Error message I recive at the 3% stage when using the German ROM and english update util.
use the file attach and read that :
http://forum.xda-developers.com/showthread.php?t=285112
Thanks but I'm not that cleud up on what commands I'm meant to be sending. It works in Bootloader mode I ge a response from the phone by send it a command. But even if I get a response telling me what the CID status is its not much help as I think ti shoudl have tekane BEBEs ROM by now as I've got the german ROMUpdateUtility sending that 54,272KB file to the phone but it stops after 3%. What are my options?
motomob said:
But even if I get a response telling me what the CID status is its not much help as I think
Click to expand...
Click to collapse
That's right. On older models MTTY was quite useful, but not on the Artemis. You cannot use it to read the CID status anyway. If you are not sure about the status, run the USPL tool, just to make sure.
I've already re run the USPL ROMUpdateUtility and it completes 100% okay in bootloader mode. But after I hard reset and then try and flash the WM6 BEBE ROM or any ROM German etc back onto it it either fails with the error code I posted up earlier or gets to 3% and fails.
What are my options at this stage? Does anyone have a link to another ROM I can try like the original WM5 O2 ROM or any other WM6 ROm that might work. I'm willing to give them all a try as it's just a useless phone right now and I haven;t sent it off as 1) I need it before the weekend and 2) As I can flash some ROMs with the USPL and others have done this no problem I really feel there must be a solution as I can still falsh the phone.
What can I say RTFM... I did it all right and I didn't have a brick, I missed out one small detail... loading on the ROM with the extended ROM. All now running and it does seem a little faster than WM5.
Thank you to all those that tried to help out. To the others that are still having probs.. Don't try and run the update in the middle of a busy day in the office whilst trying to manage 100 other things meaning you are probably missing out a line like me...
One question though how do I get back my O2 power and storage meters on the today screen back as I liked them and the WiFi seems to have a bug where when it is enabled and you click on the WiFi symbol up the top it only allows you to switch it on, when it is already on.. so you have to open up the COMM manager to switch it off.
So how did you fix it exactly? I have read this thread thoroughly and can't find out what you did!
ERROR[206] occurs while trying to update ROM to WM6
While tring to update ROM to WM6 on O2 XDA Orbit i encounter ERROR[206].
I wanted to attach the screen shot but dont know how to do that, but anyway what i am doing is i attached my pda to my pc via activesync using supplied usb cord. Everything goes well till i reach a screen where it says "You are now ready to update your ROM image...." and once i click next a progress bar apperas and my pda shuts and activesync exit's automatically and my pda tries to restart with RBG band and some text:RUU, IPL 1.25.0001, SPL 1.25.0000 and USB. And thats it after few seconds or a min i get the ERROR[206] and my pda hangs.
I dont know why Activesysn shutsdown ???
Just an additional in i want to tell that without installing activesync i am not able to connect/pair my pda with my pc. So do i need to install the drivers and then try or it doen't matter cause once i install Active sync i can connect the device.
Please help me with this....
Thanks
unable to load bootloader!!!!!!!!!!!!
HELP!!!!!!!!
I have HTC3300, tried to update rom, now its bricked. I tried to start bootloader by pressing the voicebutton and softreset but loads in t-mobile screen and hangs, im unable to start the bootloader.
Is this end of story or are there any other options to get the bootloader to start????
please help
Bootloader
I had a problem with my phone loaded touch flow 4 and cid unlocking, everything was fine then after a while it froze at boot up.
I look put the battery and did a hard reset, put it into bootloadeder mode, reflashed with a t-mobile rom does not need to be cid unlocked to do that.
Once origonal rom was working, cid unlock again, flashed back to touchflow 4.0 - sorted
Where did you got an tmobile rom from can you tell me. Mine is also freezing on booting almost once every day or so after I've upgraded to 4.0
I switched on my phone today, and it loaded the o2 screen, and now is permanently stuck on the Black and Blue screen.
I using Tom's B&B 4.0 touch-flo rom.
Please help!
try a hard reset, something similar happened to me when i was using a different rom and a hard reset fixed it, hope that helps.
Hard reset is when you push call and end buttons together and insert the stylus?
Didnt work either.
hmm.. maybe reinstall the rom then? Did you install any programs on the phone??
It's not detecting the fone, hence I cant even reinstall the ROM.
Is there any way 2 recover from this? Or did I just loose 700 bucks!?
Even problem whereas I had any concern with this version v4.0…
I flashé my artemis 4 or 5 times, it went super… (I would have of the Juste to make hardware reset…).
Since my 2 last flash, that blocks on the page during more 5min…
Flash after flash, always similar
http://forum.xda-developers.com/showthread.php?p=1445305&posted=1#post1445305
So wait, were you able to fix it?
As of right now my fone is sitting like a brick on my table.
Me I wait, of the blow I do not make more software reset…
I am obliged to await more 5min before being able to type my code PIN.
I do not include/understand, that had ever done it to me before this last flash.
I have remakes a flash, always similar, even while passing by a ROM Orange, as soon as I pass by again in V4.0, that does it to me!!!!
Its been over 5 mins for me and its still stuck on the B&B screen. HELP!
Make a hard reset and change the ROM....v3.7 for exemple...
Yea, I tried reflashing it, but the Rom update utility doesnt detect the fone at all.
Look this :
http://www.forummobiles.com/index.php?showtopic=139079
It's a french but it's easy with photo !
I read it, but because it never passes the boot screen, it never detects it hence it doesnt show up in the device manager.
What 2 do!?
Try hard reset again. What did you mean when you said it doesn't work? It didn't do anything? It tried re-installing and failed? What happened?
You don't need the ROM update utility to do a hard reset.
B&B 4.0 Getting stuck on the windows loader, is a know problem. TRy a hard reset to fix it.
Hard reset: Stylus in the hole on the side, and press the two " - " buttons between the red and green button.
This should fix the problem. Now you can flash another rom into the P3300. I'm, running 3.4 without any problem. I updated it with the HTC Tabs from Tom wich used in B&B 4.0.
The problem is that V4.0 functioned very well on my first flash…
while reinstalling the plug in HTC Home + the file SDK, that is better!!
Normal :
http://forum.xda-developers.com/attachment.php?attachmentid=47324&d=1187262723
Color :
http://forum.xda-developers.com/attachment.php?attachmentid=47329&d=1187264616
File SDK :
http://forum.xda-developers.com/attachment.php?attachmentid=47339&d=1187272601
I may come back, for now my Artemis is sitting, bricked, on my table and I've tried everything.
Someone please tell me what I'm doing wrong?
You need to flash via bootloader - hold record button down and soft reset - you now have multicolored screen - connect via usb and flash - you dont need activesync this way.