Related
hi
i have a belkin g wireless 802.x.G router at home and have a wifi setup since long..
i was always able to connect to the wireless network with Bluangel aswell as my laptops.. (i have no encyrption.. or secutrity settings)
i upgraded the radio rom to 1.12 and after that have not been able to connect to the network.. it says belkinG network found and connected but the internet explorer or msn or agile messenger cant seem to find the net settings..
internet is on share in main computer nad my lap tops still conect and use it..
i thought may be it was because of rom 1.12 but flashed older 1.31 imate with ext rom and radio rom but still cant get the internet to work..
when i use PIE it says network card not found..check settings..
in wireless settings i can see it saying that it is connected to belkin network
can anyone help me
thanks
zohaer21 said:
in wireless settings i can see it saying that it is connected to belkin network
can anyone help me
thanks
Click to expand...
Click to collapse
can you see if your pda2k's wlan adapter has an IP address? if not, then only radio is connected but that doesn't mean you have a working network connection.
I use vxUtil which is a collection of network tools, this enables me to ping, check settings, ip addresses and a whole lot of other stuff since the onboard utils just don't cut it for network use..
argh
I have the same problem although I havent upgraded any radio settings! My Wifi has worked fine since ive had my m2000, being able to stream video and music or surf the web. but recently i cant surf the web although I can still stream music.
Ive downloaded the program you reccomended, but not to sure what to do with it. Any help would be ideal
Thanks
hi
thanks guys.. i dont know what happened but everything is eorking now ..including the net.. just turned wifi on.. it asked me again whether this is for work or internet (evn htough i had it connected to internet last time aswell)
thanks
Accessing & Using the internet via USB
I have an unlocked HTC S620 & TyTN (Hermes).
When I connect the TyTN to the USB I am able to browse the internet as the phone uses the PC as a gateway automatically.Even if I do not setup a profile for activesync and the software recognises the device as "Guest". I am ceretain that this is the case and not accessing the service via the carrier or WiFi as I have enabled flight mode and been able to use the internet on the TyTN, browsing, using IM+ Mobile Mesenger etc.
I do not find the same functionality with the HTC S620 (T-Mobile Dash). Does anyone know how to get this functionality going?
Usually you always need to make a partnership for internet pass through to work. Strange you don't with the Hermes.
indiekiduk said:
Usually you always need to make a partnership for internet pass through to work. Strange you don't with the Hermes.
Click to expand...
Click to collapse
When you say partnership I asume you mean bluetooth.
I Turned on Flight mode and diabled bluetooth on the TyTN, connected it to the PC. Activesync came on and I cancelled setting up a profile so it was registered as guest. I got internet access via the usb cable connected to the PC. The same is not working for the S620.
I guess the distinction between the two is the TyTN is a Pocket PC and the S620 is a smartphone. There are various Ethernet Miniport Cards available for configuration on the TyTN. You find these under Settings>>NetworkCard>>Network Adapters. The one I find that shows up as connected is IEEE 802.11b/g Compatible Wifi Adapter, this I find strange as the device is in flight mode. The S620 does not have all the features and configurable network adapters under settings. Simply put a smartphone will not have all the networking capability of the Pocket PC
Let me know your thoughts please, or if you have another solution.
Here is how I got mine working.
1) Connect phone to pc.
2) Make sure ActiveSync shows connected.
3) Under ActiveSync Window select File->Connection Settings...
4) Change the "This computer is connected to:" setting from "Automatic" to "The Internet".
5) Under you phone go to IE -> Menu -> Tools -> Options -> Connections and make sure "Automatically detect settings" is enabled.
That's it. You should now be able to browse the internet through your pc connection.
Forgot to mention I am using ActiveSync ver 4.5.
Dash Internet Sharing Files on S720
On my HTC S720, there was no Internet Sharing option, even though it is WM6 unit. So after reading lots of threads on here and hofo, found out Blackjack had similar issue, as well as some WM5 devices running AKU 3 or higher.
So I copied intshrui.exe, intshare.dll and intshrui.lnk from Dash WM6 Rom dump, created relevant registry entries as:
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\intshruiapp]
[HKEY_CLASSES_ROOT\intshruiapp\DefaultIcon]
@="tapres.dll,-14294"
[HKEY_CLASSES_ROOT\intshruiapp\SelectIcon]
@="tapres.dll,-14295"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\Rai\:MSINTERNET_SHARING]
"0"="MSINTERNET_SHARING"
"1"="IntShrUI.exe"
"2"=dword:00000001
"3"=dword:00000000
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\Rai\:MSINTERNET_SHARING\Session]
@=hex:00,db,4d,43,70,b9,c7,01
Then run intshrui.exe and while I can connect via Bluetooth PAN, I couldn't get any IP. I also tried a static IP and that didn't work as well. I investigated a little more, and found another key:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\Comm\ConnectionSharing]
"DisabledOnBoot"=dword:00000001
"EnableAddressTranslation"=dword:00000001
"EnableDhcpAllocator"=dword:00000001
"EnableDnsProxy"=dword:00000001
"EnablePacketFiltering"=dword:00000001
"PrivateInterface"=""
"PublicInterface"=""
"SetLastDhcpAddrToIEH"=dword:00000001
[HKEY_LOCAL_MACHINE\Comm\ConnectionSharing\Driver]
"Dll"="ipnat.dll"
"Flags"=dword:00000002
"Index"=dword:00000000
"Prefix"="NAT"
Then I copied ipnat.dll to s720. Here is the interesting part. If HKEY_LOCAL_MACHINE\Comm\ConnectionSharing exists, intshrui.exe will not connect, it will briefly grey out and come back to disconnected mode. As soon as I delete the key, it will setup USB or BT PAN and wait for connection (left soft key turns to Disconnect). I don't even have to reset the unit while making change to this key. Also, I left the HKEY_LOCAL_MACHINE\Comm\ConnectionSharing as empty, and noticed as soon as I run intshrui.exe, it will populate
"PrivateInterface"=""
"PublicInterface"=""
keys under ConnectionSharing key. I also tried to change various reg keys, such as HKEY_LOCAL_MACHINE\Comm\Tcpip\Parms\IpEnableRouter to 1, and
[HKEY_LOCAL_MACHINE\System\State\Connectivity]
"InternetSharing"=dword:00000001
None helped as well.
Am I missing a file or reg key to make this work? I looked on my Dash for various keys/files but didn't see anything useful.
has anyone figure out how to get internet sharing on wm6?
Have a look at;
http://forum.xda-developers.com/showthread.php?p=1517183&posted=1#post1517183
I posted up the files and a .reg file taken from my WM6 Dopod 838, but I don't know if everything required is there. If anyone knows what else is required I'm happy to copy it from my device and post it here.
Would you mind posting ipnat.dll - it is missing from Blackjack II WM6..
Internet Sharing kavana's 080308
does anyone have a problem with Internet sharing?
Bluetooth PAN and USB sharing dosnt work for me with kavana's 080308 rom
and remade wm6.1 kavana's 080308.
Before I never had any problem with T-mobile, russian, rodger, HTC.....
skf said:
does anyone have a problem with Internet sharing?
Bluetooth PAN and USB sharing dosnt work for me with kavana's 080308 rom
and remade wm6.1 kavana's 080308.
Before I never had any problem with T-mobile, russian, rodger, HTC.....
Click to expand...
Click to collapse
I have fix this problem,and update XIP and SYS to 19202,i'll upload the new version later,just wait...
Thank you. I wait for new version .
btw With your rom I able to install and USE tomtom ,
with T-mobile Windows Mobile 6, I get incompatible with tomtom navigator arror.
http://forum.xda-developers.com/showthread.php?t=364685&highlight=tomtom
What's new in 080312:
Update to new kernel
Full English version
Fix Internet Sharing ----do not work for me ;(
6.1 Internet Sharing Problem *R.I.P.*
Has anyone figured out why Internet sharing NO LONGER works with any 6.1 roms that i flashed to? From Kavanas ROM s to Ricky's Remakes.
Is there a fix to this?
Can any of you "smarter" Gents or Ladies, look into this.
this is wierd. who is your operator? mine works just fine with the settings i use. maybe we should find out if this problem only exist for certain operators. might also have to do with the network connections on the pc. like i said in another post, i noticed a new network connection appears when you sync the phone, unlike in wm6.0. another thing is i would have problems with activesync everytime i flashed to a new rom without doing a uninstall & reinstall of activesync.
Se7eN43 said:
this is wierd. who is your operator? mine works just fine with the settings i use. maybe we should find out if this problem only exist for certain operators.
Click to expand...
Click to collapse
Shouldn't be operator issue. Worked great prior to updating to 6.1. (T-Mobile USA)
What rom are you using?
damn u were quick to respond. i edited my first post. im usin the new v15 rom. and tmobile is my operator.
ediit: i just messed with my settings and went back to how i had them before and now its not letting me do the internet share. hmm... this is not cool
Iv used V14, V8 and V5 and none of them allow my internet sharing to work. V5 worked at first but then stopped.
I really like 6.1 but I NEED that internet sharing
WHAT settings are talking of? that work for you?
INTERNET VIA USB PROBLEM SOLVED!!!!
ok i think the problem may be with activesync. like i said, in my second post edited, i had messed with the advance settings of connections menu, and reverted back and it stopped net sharin via usb. i noticed activesync gave me an error sayin somethin about not being able to fully connect but i was still able to browse my phone, also giving me a constant animation of the activesync icon, saying "connecting" never stopping when a full connection is establish. when i fixed this and the icon stopped turning and said "connected" i tried and it worked.
on a fresh install of the past couple of roms, this is what i did... (from an earlier post of mine)
this is what i did. use the "connection setup" in the accessories folder. choose country & operator. dont think it matters but i also selected "Enable Auto Configuration" under the menu.
in explorer, under "menu/tools/options/connections" Auto.Detect Settings is selected. under "Select Network" choose The Internet.
now go into ur phones "Connection" settings, select "GPRS". in my case, select, "T-Mobile WModem Link", under "Connects to", select The Internet. for other operators, guess look for somethin similar. now u should be able to share via usb.
one thing u might have to do is, delete whatever gprs settings u have now and power off and back on. then do the above.
sorry if this is so messy looking
Can you post the entry "seetings" for "T-Mobile WModem Link"
I manually entered my connections.
So i dont have the modem link
Ok, after a lot of had work I now appear to have access to one of my routers (Netgear WNR834B)...
But I can't get Internet explorer to access the internet via the wifi connection... My XDA keeps trying to access the GPRS connection.
I've ready several other threads but nothing seems to fit my problem. Any ideas? From what I can read I have to set up a connection to the wifi but I can't find wifi listed in the connections window...
Can someone give me a few pointers...
Thanks in advance
Well i had the same problem with my settings....
When i have configured my mms settings mannually... the IE wants to connect to gprs always but
I go to settings... conection advanced tab and change the firs to my worknetwork cause says thta all the pribate programs wants to conect with my GPRS settings... just let it no choose to take mms settings... it seems to be the answer to me and everything works again for me... oups i miss something you need to use once your gprs then make this change please.
Hmmm
I think I see where your going... but I can't see how this would help... But I'll try hand on...
No that didn't work for me... I tried to change the connection to use the MMS but all it tries to do is use the GPRS again. I can't seem to change it even after it connects via MMS.
Found out another bit of the puzzle tonight. I have to set an IP inside the BA or else I get no conections to the internet via the active sync cradle. (set to 192.168.1.22 subnet 255.255.255.0 gateway 192.168.1.1)
But even thought the wireless LAN manager says I'm connected (and I get the correct MAC address for the router) if unplug the BA from the cradle the router reports I'm not connected... Its almost as thought theres a stealth firewall running on the PDA...
Any idea?
Mmm lets work on it...
i will upload a video of this issue to show you how it works... i dont have any idea of make it works by entering a diferent ip.
Try this http://www.modaco.com/content/pocket-pc-software/246171/new-free-utility-nodata/
I noticed when im out of range of my home wifi, or turn it of then on, the TP2 forgets my wep encryprtion password and i must input it each time.
Anyone notice this?
anyway to make sure it always connects to the wifi i specify and keeps my encryption code so i dont have to keep inputing it?
EDIT - Problem appears to be connecting temporarily vs creating an access point account under settings:
My wifi issue has been solved.
"It seems that i was just doing a wifi search and connecting to my router.
Instead, you need to go into settings, then wifi settings, and CREATE an access point by inputing all your SSID data, wep key etc etc...
once it has this it stores it and whenever your in the area it auto connects as it should.
it seems that this was a user error on my part and not the TP2 error.
prior to this i was just searching for my router and connecting... the tp2 never actually saved it and each time i was out of range or turned phone off., i would have to search again.
inputing the info via wifi settings and NOT searching and connecting solved this problem"
i'm not getting this problem mate... i've got a few keys to different wireless networks and it all works seemlesley.
hmmm...
if im the only one, maybe ill delete all the info try again..
yup, got the problem here, it usually happens to me with new phones before i start installing other stuff, don't know which program though to install to really make it stick. Right now most of my settings are not sticking, they revert back to stock after a soft reset or after a few hours unattended. annoying as hell.
yep, me also. It's happened when I haven't used WiFi for a while -I think
what happens when you put in the key in the wireless tab.
hardpress wifi in the comm manager and choose wireless
then you get the "old" menu where all settings for a network have to be filled.
had the problem of forgetting first but when inserted through this way its gone.
vinciente
i don't have that problem on mine.
BTW, i use WAP not WEP. it may make different ???
My old Touch HD did the same thing, the pro2 on the same network though seems fine...
salemfox said:
My old Touch HD did the same thing, the pro2 on the same network though seems fine...
Click to expand...
Click to collapse
so, it maybe same device but different ROM will have different problem then
My wifi issue has been solved.
It seems that i was just doing a wifi search and connecting to my router.
Instead, you need to go into settings, then wifi settings, and CREATE an access point by inputing all your SSID data, wep key etc etc...
once it has this it stores it and whenever your in the area it auto connects as it should.
it seems that this was a user error on my part and not the TP2 error.
prior to this i was just searching for my router and connecting... the tp2 never actually saved it and each time i was out of range or turned phone off., i would have to search again.
inputing the info via wifi settings and NOT searching and connecting solved this problem
loueber said:
My wifi issue has been solved.
It seems that i was just doing a wifi search and connecting to my router.
Instead, you need to go into settings, then wifi settings, and CREATE an access point by inputing all your SSID data, wep key etc etc...
once it has this it stores it and whenever your in the area it auto connects as it should.
it seems that this was a user error on my part and not the TP2 error.
prior to this i was just searching for my router and connecting... the tp2 never actually saved it and each time i was out of range or turned phone off., i would have to search again.
inputing the info via wifi settings and NOT searching and connecting solved this problem
Click to expand...
Click to collapse
How did you create a new access point and enter SSID, wep etc. as I can only add a new wireless network in the configure wireless networks settings screen?
Bri & his SPV M3100 said:
How did you create a new access point and enter SSID, wep etc. as I can only add a new wireless network in the configure wireless networks settings screen?
Click to expand...
Click to collapse
Start menu, settings, connections tab, wifi icon, "wireless networks" button, then "add new" should be listed on top of all the networks seen.
click "add new" then follow prompts to enter network name, encryption type, etc etc...
I got the htc wifi router working and surfed for a few minutes. I logged out of my PC and back in and the internet wouldnt work on my PC or my phone. I rebooted my phone and still the same problem. Has anyone else run across this problem? How do I fix it/troubleshoot it? 3G is showing it is connected
Has anyone else had this problem? I had to finally do a hard reset/wipe to get things working again.
There's another similar report here, maybe in the cdma area.
I'm not clear on your issue. Is this wmwifi not working after a reboot or Activesync not recognizing after the reboot?
And are you using the latest wmwifi?
edit: I'm adding that I downloaded the latest wmwifirouter last friday 18sep09, and I thought it was a vpn/wifi issue on my laptop. My TP2 did not recognize under activesync after I did a few things, but WM did work the one time I tested it.
I am not using wmwifi. I am using HTC CM Internet Sharing:
http://forum.xda-developers.com/showthread.php?p=4170499#post4170499
I figured it was put out by HTC (and free) so it should work right?
It created the wifi access point fine, and I was able to surf with my laptop at good speeds. I left and came back and the internet would no longer connect (laptop or phone).
I tried everything from soft rebooting, to removing the application, to calling *228 (reset the phone), and even manually setting up the verizon data settings. Nothing worked. I just could not establish a data connection.
Finally I gave up and did a hard reboot and restore and it finally worked.
I really need a reliable way of setting up a wifi access point but dont want to risk this fiasco again.
Yeah, I mis-read your first post, sorry!
For me it was as simple as starting the wifi router program and then cleanly stopping it. If forced to quit, you will have no network access. It's happened a couple times for me.
jbass350z said:
I got the htc wifi router working and surfed for a few minutes. I logged out of my PC and back in and the internet wouldnt work on my PC or my phone. I rebooted my phone and still the same problem. Has anyone else run across this problem? How do I fix it/troubleshoot it? 3G is showing it is connected
Click to expand...
Click to collapse
Hi there, I had used htc wifi router a while back and hadnt tried connecting the phone to the local wifi network since. After reading your post, I thought I'd check and yes I was getting the same problem, i.e. it wouldn't connect to my home wifi network.
I found the fix to be as follows:
1) Go into comms manager, turn WiFi on
2) Under settings go to wireless LAN
3) In the main tab you will that the SSID is set to "Mobile router", select change network button underneath.
4) Now you should see the SSID of your network, dont select anything, just press o.k at the top and hey presto it will connect.
Let us know if this worked.
billu said:
Hi there, I had used htc wifi router a while back and hadnt tried connecting the phone to the local wifi network since. After reading your post, I thought I'd check and yes I was getting the same problem, i.e. it wouldn't connect to my home wifi network.
I found the fix to be as follows:
1) Go into comms manager, turn WiFi on
2) Under settings go to wireless LAN
3) In the main tab you will that the SSID is set to "Mobile router", select change network button underneath.
4) Now you should see the SSID of your network, dont select anything, just press o.k at the top and hey presto it will connect.
Let us know if this worked.
Click to expand...
Click to collapse
Thanks. I couldnt connect to the internet through 3G either though, even though the 3G icon was showing in my status bar.
jbass350z said:
Thanks. I couldnt connect to the internet through 3G either though, even though the 3G icon was showing in my status bar.
Click to expand...
Click to collapse
Ah, that's probably for some other reason, no issues with 3G connection for me.
Same problem for me. I connect to the mobile through wifi (Adhoc connection) and the mobile is connected in 3G but I can't surf internet from my laptop.
Enable DHCP
Hi all
Sometimes after using this software you need to renable DHCP in the connections settings. This can be done via:
Start>Settings>Connections>WiFi>Wireless Networks>Network Adaptors>NE2000 Compatible Ethernet Adaptor and then select Use server-assigned IP address.
Cheers
andrew-in-woking
hi i installed e htc wifirouter but it is using my mms setting instead of my phone internet setting. any1 can help?