Hi, to all i need a windows mobile 5 (ROM) for my fujitsu-siemens T830 ??
If you have some other adress for this tipe of PDA pls help is important!
How do i make a Windows mobile beck-up from my PDA!!!
10x All
No ROM available at the moment. You can go to www.firstloox.org for more help on this model PDA. To back up your T830, you can try installing SPB Backup. Or use the built-in FSC Backup program.
Hope that helps.
I believe ( i´m not sure... ) there is now available a new rom update for this model T830 at fujitsu-siemens site support.
rgds.
Related
I have wallaby ppc with
ROM version : 3.14.40.eng
ROM date : 11/26/02
Radio version : 6.18
Protocol version 324e4
This is locked to T mobile. I want to unlock it. I have usb cable with me. I downloaded xdaunlock.exe & saved it in my PPC with help of active sync. I opened the soft in PPC it says cannot get codes. I think this version of my PPC is too low. WHat am i suppose to do now? Should I upgrade? if i have to upgrade please tell how to upgrade or is there any old soft to unlock this? Please help me.
You should upgrade to the xda-developers special edition ROM
xdaunlock requires the wmodem application, which isn't included in your ROM-Version.
Or you can alos cook your own rom. Best choice for unlocking would be 3.17.03
HTH
Stefan
Thanks a lot Mr.LumpiStefan. I dont have linux in my computer. I just have Windows XP & windows98se. Can I install special rom in windows XP? Or is it easy to cook my own ram? How to go about that. If u give me little detailed help I will be very thankfull to U.
vdeepakv said:
Thanks a lot Mr.LumpiStefan. I dont have linux in my computer. I just have Windows XP & windows98se. Can I install special rom in windows XP? Or is it easy to cook my own ram? How to go about that. If u give me little detailed help I will be very thankfull to U.
Click to expand...
Click to collapse
You do not need any Linux on your machine.
The special Rom comes in exe format and if you cook your own, you can choose between exe-Format for easy-Flashing or nb1/nbf-Format for secure flashing.
You find Special Edition ROM here:
http://lumpistefan.dyndns.org/tools/special_rom_1.2.exe.zip
and a Rom kitchen here:
http://lumpistefan.dyndns.org
Stefan
Thanks a lot again. I have stared downloding the special edition rpm now. Is it ok if I run it in the Windows98 meachine? Should I transfer the full 15mb soft into the PPC? I think i am asking u a stupid question but i am not too familiar with these PPC. Does this works only in WIN XP or WIN 98 is ok?
I think win 98 should be ok.
It just requires a working active sync connection (I never tried this under win 98)
You don't have to transfer the file to your PPC.
Unzip the file, so that you get the real exe-file, run it on your PC and follow he instructions....
Stefan
I will try it out in an hour & post the results.
Thanks a lot. I unlocked my ppc without any problem. Thank U very much.
I have wince 2003 a05 installed in my x50v. I can't see any BIS, although it say s 128M ROM in the system information. Someone said this can be solved by changing the language. But I can't find any wince 2003 ROM (nb0 files) available online. Can anyone tell me how to solve my problem and upload required ROMs? Thanks!
teaonly said:
I have wince 2003 a05 installed in my x50v. I can't see any BIS, although it say s 128M ROM in the system information. Someone said this can be solved by changing the language. But I can't find any wince 2003 ROM (nb0 files) available online. Can anyone tell me how to solve my problem and upload required ROMs? Thanks!
Click to expand...
Click to collapse
you HAVE seen this thread, have you not ??
http://forum.xda-developers.com/showthread.php?t=322498
why bother with 2003 ( not even 2003SE ) - when you can have WM6 ??
~~~
If you don't like it ... all I can find is 2003SE here:
http://www.efsoft.it/romforpdappc.htm
~~~~~
Thanks! Nice website, man!
To be honest, I have tried two ways two upgrade my x50v from 2k3 A05 to WM5 which is a pre-requirement for WM60:
1) use Dell's upgrade program (failed at the last step, formatting rom 30%)
2) use SD image loader with WM50 A01 Eng ROM files (failed at "erasing storage 30%)
I was just wondering if there is any hardware problem of my ROM. Maybe that's why I can't see the ROM in 2k3 A05 system.
I also tried using language change (Japanese <-> English). But it didn't work. I still can't see ROM in my system.
I even tried writing WM60 ROM directly, but also failed at "erasing storage".
Is there any software that can diagnose the ROM?
Thanks again!
who knows from all the playing around you have done that you "muddy" up your device and causes conflicts ...etc ???
I would suggest:
hard reset your device ---That should revert it back to factory settings.
and now you can start FRESH upgrade/downgrade ...etc !!!
If you decided to experiment with the link I gave ...
http://forum.xda-developers.com/showthread.php?t=322498
make sure you read throughly the "required" part of the post before proceeding !!!
""
Attention!
If you have Windows Mobile 2003SE ROM on your device, FIRST, please download THIS ARCHIVE (RAR 32.4 MB) (Mirror),
/ and update your PDA to A01 Windows Mobile 5 ROM.
/ After that, go to Dell site, download official WM5 A02 ROM and update your PDA to WM5 A02 ROM.""
It's a used x50v. I got it a couple weeks ago.
As I mentioned, I can't upgrade to WM5. Leave WM6 alone. Thank you though.
Please help me?
I serach WM5 for my Smartphone T830.
Can me someone help?
THX
what kind of help you need. can you explin it more?
WM5 is there: http://support.ts.fujitsu.com/com/support/downloads.html
What you'll to do: write t830, select t830 and press operating systems and then download, agree
If you need mdoc.dio, it must be in C:/fsc.tmp/... on your PC
Hi,
I have decided to upgrade my still useful Hermes but I'd like to be able to use my BB Connect with it.
Can anyone tell me what I have to do to make it work please ?
I have tested several AKU but it doesn't work (.0.4.3 / .0.0.0 / .0.1.6 and .2.0.0).
Can you please help me making this work ?
Thanks
hi,
you must make backup your data (you can use microsoft myphone service http://sn1-p3.myphone.microsoft.com/mkweb/Start.po?mkt=en-EN ) and after it you must connect your pda to PC. newer version of BBconnect is http://www.sems.org/entry.asp?ENTRY_ID=276 , so you can upgrade your PDA and after it install again microsoft myphone and bbconnect.
tarda said:
hi,
you must make backup your data (you can use microsoft myphone service http://sn1-p3.myphone.microsoft.com/mkweb/Start.po?mkt=en-EN ) and after it you must connect your pda to PC. newer version of BBconnect is http://www.sems.org/entry.asp?ENTRY_ID=276 , so you can upgrade your PDA and after it install again microsoft myphone and bbconnect.
Click to expand...
Click to collapse
Hi,
Thanks for your answer but I don't understand what you mean.
What does backup allow me to do ?
I've already tested latest version of BBConnect and it doesn't work at all.
What do you mean by upgrade my PDA ?
Thanks
hello, I have a PNA AIRIS T920 with Windows CE NET 4.2 Core Edition.
I would like to change the system by a Windows CE more advanced or windows mobile but I do not know how to create the new rom.
I have an image of the original firmware and I know how to flash the device.
I need some help please