Related
i was installing new rom on my device.when it was 12%, the computer got locked and i had to reset.Now,my baby did not reflash again.i tried again but himaupragadeutility gave : communication problem. what can i do now? can anyone help me? so a few people know this device, the others even do not know what pda is. what i can do?????????????????????????????
keep on doing a hard reset until you reach bootloader mode. from there try upgrading again. were you upgrading to 2003se or wm2005?
i was installing the rom from 02 web site
i was installing the rom from the 02 web site.i had tried but it did not open boatloader.what i can i do?
anything showing on your xda screen? if it's blank then you have to continue doing hard resets. a buddy of mine had the same problem and he was able to bring it back to bootloader mode after 10 or so hard resets.
if something is showing on the screen (like "usb version...something") then this is already bootloader mode. what you do is put the xda back on the cradle but don't expect activesync to recognize it. just put it back on the cradle and then rerun the upgrade.
hope it works.
rob
there is only o2 logo on the device,i tried hard reset but it did not open boatloader
My DOPD - bought in China was running a chinese version of WM5.0 and I wanted to install a english version.
After upgrading my DOPOD 900 with the upgrade : Universal_Upgrade_v1.30.68_radio_1.09.0.zip I have problem.
It is really DEAD. soft reset does nothing and a hard reset only gives the option of "0" and "X" which do nothing.
the USB is no longer recognised and nothing seems to want to communicate with the Dopod. It seems the USB loader program is no longer running on the Dopod.
Has anybody any idea how I can attach to the device an install a new bootloader, or something.
I had the same issue and I have a solution. But, let me tell you my process that got me where you are.
I tried performing the update using the No_ID (or whatever) method and kept getting errors. I rebooted my PC and changed the Operator ID using the HTC64 Extended ROM Tool.
After this, I was able to use the typical installer. The flash went fine and I hard reset as instructed. From that point on, I had your exact problem.
A dead screen. I was able to redo the hard reset after pulling the battery but I would just end up with the dead (blank) screen again. ONCE, I did get it into boot loader mode where I could actually read the screen. But, of course I reset and again had a dead screen.
My solution was to revert back to a true O2 ROM. Even though I couldn't see the screen (still can't), the ROM update is proceeding as I type this. I'm at 44% of the radio ROM installed.
Hope this gives you hope!
Well, good news. I just finished the ROM update and I'm looking at the O2 boot image.
Is there any indication that the QTek ROM looks for the Carrier info to be QTek or it will fail once installed? Just wondering why I had this problem.
ARG! Reflashing with QTek ROM did the same thing. :evil:
Blank screen and all.
check 2 things
uncheck usb from active sync
hardreset after upgrade has been completed
just do the upgrade again and it should come alive again
Thanks and another question
Well thanks for the hope. but I have tried this already with no luck, however after this message I will try again. My biggest problem is that I cant regain communication over the usb.
I would like to know how your system behaved when you plugged in your apparantely dead device. My system just says device un recognised and I cant begin a download with or without active sync.
So I cant get another rom image to download.
regards
Nick
dolebole said:
check 2 things
uncheck usb from active sync
hardreset after upgrade has been completed
just do the upgrade again and it should come alive again
Click to expand...
Click to collapse
This was the first thing I did.
The problem is that I cannot get any communication over the USB.
The device is unrecognised on USB and after starting any ROM download it just timesout after "checking information from device" message .
Ever seen a dead USB interface like this ?
The USB PnP mgr sees the hardware but cannot establish the device type !!
Nick
@mobinick: You and I have the same situation.
I have 2 Universal dead like this. 1 Exec and 1 Jasjar.
Both dead, blank screen, can not enter bootloader, can not connect with PC. PC can not recognize the driver usb of the device.
I opened the phone and found that logically everything is so so. There is no clue about hardware.
So I think: the address of the bootloader with device ID maybe unlucky damaged.
Who can fix this problem pls share us some experience.
Thanksss
ta_mobile said:
@mobinick: You and I have the same situation.
I have 2 Universal dead like this. 1 Exec and 1 Jasjar.
Both dead, blank screen, can not enter bootloader, can not connect with PC. PC can not recognize the driver usb of the device.
I opened the phone and found that logically everything is so so. There is no clue about hardware.
So I think: the address of the bootloader with device ID maybe unlucky damaged.
Who can fix this problem pls share us some experience.
Thanksss
Click to expand...
Click to collapse
Why don't you guys take it to your respective service centres and get it fixed?
Even if you have to pay something, it will certainly be better than these bricks occupying table space.
Have you tried going back to an original O2 ROM? I went to 1.13.139 WWE and all is fine now.
Just to share my experience with you guys here:
I posted my problem way back during the Radio Upgrade from 1.04 to 1.06. My Dopod 900 got stuck on the splashscreen. I couldn't get my device to pass the splashscreen even after upgrading/downgrading the radio ROM back and forth two times.
Finally, I just forced my device into bootloader mode (Backlight+Reset+Power). Even after doing this, the dopod screen was completely blank (no indication of serial/usb letter on the screen). I downloaded the official O2 exec ROM and plug my device (in bootloader mode) back to the USB port. It said unrecognized port on my PC. Despite that, I reflashed my Dopod back with the NoID tool the complete O2 ROM (Radio, Main ROM & The extended). Once completed, my device regained its consciousness.
I managed to flashed back the 1.06 radio after that. And has since been upgraded 4 times (two i-mate, one Orange and the latest QTek ROM) with no problem whatsoever.
I had the exact same problem as you to guys, i tried to update it, and it wouldn't budge...
It constantly, without fail timed out... I tried everything...
As my hope started to wain, i gave it one last shot...
I took out everything, sim and sd and battery, then connect the battery back and from the bootloader menu, connected it to the pc, with usb cable...
Finally it worked!! Like normal, i was able to load any and all rom and radio updates...
Wouldn't work, from the normal working screen (which was working for a while, i later tested this out, and found out ) and also wouldn't work, from the bootloader (power+backlight+reset) with sim+flash in there....
Hope you guys have some luck.. I htink you should, because i was in the exact same boots as you guys...
It worked for me
My O2 Exec did exactly the same thing, and I spent (on and off) 24 hours trying to get the damn thing to go again - wouldnt charge either....
I too finally took out everything, SIM and sd and battery, then connect the battery back and from the bootloader menu (which I only found about from this site), connected it to the pc, with usb cable...
It worked as well - bloody brilliant. I now have the latest 02Exec Upgrade (Version 1.30.162 AKU2 Release) and all is great.
Cant believe that 2 days after logging email with O2 site, they have not responded...
Would almost kiss you guys.....
Solution for getting stuck in bootloader
http://wiki.xda-developers.com/index.php?pagename=Instructions for those stuck on Boot Screen
Hi guys.
Was hoping you could help me out.
I performed a search on the forums and didn't find the answer.
I have an O2 XDAII.
I tried to upgrade the ROM from the O2 site.
The upgrade somehow went south and the only thing I have on the sceen of the device is:
At the top - "Serial"
At the bottom - "v1. 06"
I tried taking out the battery and then putting it in again, but the same things appear on screen as detailed above.
Any suggestions/advice would be gladly appreciated.
I had that.
I plugged back in the USB cable and the message changed from Serial to USB - I then re-ran the ROM upgrade and it all worked OK.
Give it a try and let me know how you got on.
I'm getting the same problem. On my phone (UTStarcomm PPC6700), I have the Serial/USB header, with a V1.00 on the bottom.
When I first attempted the ROM Upgrade, it switched over to the screen. I've tried removing the battery, resetting, and re-launching the ROM upgrade app, but nothing.
Any other ideas???
solutions found?
Anyone know the solution?
larboleda said:
I'm getting the same problem. On my phone (UTStarcomm PPC6700), I have the Serial/USB header, with a V1.00 on the bottom.
When I first attempted the ROM Upgrade, it switched over to the screen. I've tried removing the battery, resetting, and re-launching the ROM upgrade app, but nothing.
Any other ideas???
Click to expand...
Click to collapse
ISTR that when you get to that screen it is after a hard reset.
You should just be able to hook up the USB cable and re-install the rom.
If you are having problems re-installing the rom, what sort of error messages are you getting?
Have you tried installing another ROM?
Serial v1.01
This is all that is written on the grey screen after trying to install ROM. Does anyone know how to proceed? I have an i-mate Jasjar.
It doesn't sound as though the rom is getting installed properly.
Do you get any error messages from the ROM installer?
I did not get any errors while installing. I did upgrade to 1.30.101 some weeks ago, but the phone turned very slow and froze. Therefore I now tried to install 1.30.77. Now the screen is grey and the only text is serial and v1.01. Anyone know how to proceed?
problems updating ROM
I have a Tmobile MDA PRO. I updated the ROM to the newest version, but now my phone only displays a screen with a tmobile logo, and the version information and thats it.
I tried to do a hard reset and still the same thing, I tried to redo the ROM install program, but its says[error message 101] that my phone is on but it cannot connect to it.
I have had my phone for one day and it is virtually useless.
Can someone please tell me how to flash the rom, or which is the best ROM to install for the mda pro/qtek 9000 series?
Help would be much appreciated!!!!!!!!!!
koolaid4star said:
I have a Tmobile MDA PRO. I updated the ROM to the newest version, but now my phone only displays a screen with a tmobile logo, and the version information and thats it.
I tried to do a hard reset and still the same thing, I tried to redo the ROM install program, but its says[error message 101] that my phone is on but it cannot connect to it.
I have had my phone for one day and it is virtually useless.
Can someone please tell me how to flash the rom, or which is the best ROM to install for the mda pro/qtek 9000 series?
Help would be much appreciated!!!!!!!!!!
Click to expand...
Click to collapse
Go and get your MDA PRO into Bootloader Mode: Press backlight + power button and do a reset. You should now see without backlight on top of your screen: serial and on the bottom: v.1.xx
Now connect MDA PRO with the USB datacable and run the ROM Update
again .. hopefully you have 50%+ battery capacity
ive got a wizzard .... my prob is that i installed da rong rom ... and now my usb port is not working ... its not charging neither is it connecting to da usb for active sync ... tell me wat to do ....
I was upgrading my radio last night and power went out in area. The device now freezes at blue imate logo page. Will not boot up. When I hard or soft reset it still stops at blue screen. Can not get into bootloader. XP says it does not recognize the device. ActiveSync does not connect.
Screen says "No GMS". D 1.30 .76 WWE. Just out of warranty. Any help would be appreciated.
cboy!!!
cboy77 said:
I was upgrading my radio last night and power went out in area. The device now freezes at blue imate logo page. Will not boot up. When I hard or soft reset it still stops at blue screen. Can not get into bootloader. XP says it does not recognize the device. ActiveSync does not connect.
Screen says "No GMS". D 1.30 .76 WWE. Just out of warranty. Any help would be appreciated.
cboy!!!
Click to expand...
Click to collapse
I have sent you a pm, that will correct your device. Please check your pm's...
Take care,
-Jwrightmcps
Jasjar Problems
Went in and restored the DOC to original layout. Have been trying to load Original OEM ROM (Jasjar WWE 1.30.76). Keep getting Country ID Error.
Any assistance would be appreciated.
Thanks in advance!!!!!!!!!!!!!!!
cboy77
Hi, i have just bought a new imate jasjam and uploaded the windows mobile 6 as per your instructions. Everything was going ok, then active sync kept stuffing up, i reinstalled it 3 times and only sometimes works, i have limited to no connectivity in my LAN, and my imate takes 2hrs to do anything once i touch the screen. i have tried hard resetting etc nothing! i have searched and searched for everything and found nothing, i eally hope someone can help me, i am at my wits end!
PLEASE HELPPPPPPPPPPPPPPP
Try putting it into bootloader and flashing hard spl and flash a new rom after that.
thank you!
i just tried to do that and it said error please connect the usb to the phone etc..and it is..
if this helps anyone- ipl 1.04 and spl.2.10.0lipro?
ggrrrr
Can you tell us what ROM you are trying to flash, and what OS you are using to connect with?
ROM VERSION: 3.30.2.1
ROM DATE: 05/15/07
RADIO:1.38.30.10
PROTOCOL:32.71.7020.12H
I have a windows xp sp2
i am so grateful to everyones input. thanks
usb connectivityy
Goto to the usb settings under communication and remove the tick from advanced usb fuctionality. Maybe unplug from USB first before doing that.
Thanks, have just tried that but it didnt work, still got the red cross on the icon and limited to no connectivity thru the LAN. i am so lost, i should have just left the phone as is ;-(
have you tried loading into the bootloader and then connecting the jasjam to your pc?
How to get into the bootloader is described here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Resets
once connected just run the offical update from telstra (which is a damn good rom btw) and it should return your jasjam to normal. The latest Offical update can be found here - http://forum.xda-developers.com/showthread.php?t=348436&highlight=telstra
hope that helps
edit; should have read first post. hmmm. try uninstalling activesync and reinstalling it, or try on another computer. i had this problem awhile ago, can't remember exactly how i fixed it, but it was a combination of new activesync, bootloader and hardresetting
ok, i have reset it- is the bootloader screen the one with 3 colours with ipl etc on it?
i connected it and it then said usb on the screen, but activesync can't connect it?
When you get to the bootloader screen with the 3 colors you need to reflash with a new ROM
thanks to everyone, i am now back and running! god knows hoe but thanks!