Hello,
How can I do a hard reset with wm5. If i push power and reset button. It will not hard rest. Because everthing in my agenda and all my contacts are still there.
And how can i format my sd card.
Thanx a lot
Press and hold the "Power" button, and then press the Reset Button
Colored stripes (the bootscreen) will appear on the screen
* Quickly press "Record" & "Camera" before the versions appear at bottom right
* OR, press "Power" & "Camera" & "Record" buttons and Reset at the same time
Either way mentioned above should work
You'll see three options on screen. You MUST change the second and the third to "yes"
* You can do that with the "Camera" and the "Record" buttons.
When you are done, press the "Mail" button
A white screen will show for a while - just wait.
It is presently clearing your device in preparation for the new ROM to start executing
When the bootscreen, aka. the colored stripes is displayed, wait more, you are booting
The welcome screen to set up your device will appear shortly ... and you are done...
Related
Ineed assistance.
After loading 2005 and play with it for a while, The phone stopped working. I can't change the volume etc. etc. Trying to lad some Lang. updates resulted in a very strange look behaviour.
Tried Hard rest by pressing tradionaly the ON/OF together with the soft reset nobe but nothing happend, themachine never falls to the inital setup and always excited with all the programs loaded. The green LED flashes like every thing back to Norma HOWEVER
It is completely out of it's normal operation.
How can I "hard reset it?????
Dubi said:
How can I "hard reset it?????
Click to expand...
Click to collapse
--------taken from another post (I'm too lazy to type)---------
you have to make sure to follow the sequence correctly and keep all of them pressed fo 5-10 secs
> Press power putton
> Then press Record Button
> Then Press Camera Button
> Then with Stylus press Reset Button
After this you will see 3 options.
1 Kit = YES ------------------ change this to NO
2 Register Hive= No --------------- should remain NO
3 Storage = No --------------------- change this to YES
*Use the Recorder Button to Scroll.
Use the Camera Button to change values.
*To Save changes press the Navigational Button.
> Press power putton
> Then press Record Button
> Then Press Camera Button
> Then with Stylus press Reset Button
oR
> Press power putton
+ press Record Button
+ Press Camera Button
+ with Stylus press Reset Button
which one ?
This one:
> Press power putton (don't let go)
+ press Record Button (don't let go)
+ Press Camera Button (don't let go)
+ with Stylus, press Reset Button (you may want to hold it a bit until you see the menu I'm referring to on my post above)
hi
dont know if this is known or not but i saw it for the first time so i am reporting it here
i am currently using wm6 rom
when you bootup your device after a soft reset at that time keeping the backlight button pressed brings up a menu
"enable KITL"
"clear registery hive"
clear storage"
with the option of no/yes in front of them
yes, this is supposed to be there. the top one is a debugging mode and the bottom are self-explaining: the two together do a hard reset.
how to hard reset a excalibur with button combination?
thanx in advice.
Self-service
Posted by: john1027
I haven't had to try it yet on the S620, but most HTC devices will hard reset by:
1. Press and hold soft1 and soft2 keys.
2. Press and hold power button for around 1 to 1.5 seconds. Release power button. Keep hold soft1 and soft2 keys.
3. Later, screen should show instructions to ask user to press '0' key to reset to factory default.
4. Press '0' within the timeout period, which is only several seconds only.
5. If no instruction is shown on the screen, repeat steps 1 to 4.
The timing is sensitive.
Let us know if it still is that way with the S620/Dash. I would be surprised if it wasn't. It is set-up that way on the 3125/Qtek 8500/smartflip as I just did it yesterday.
Click to expand...
Click to collapse
from: http://www.howardforums.com/archive/topic/1030766-1.html
Hi All I Really Need Some Help Please My Phone Wont Turn On Its Stuck On Starp Up Boot Screen.,which Means There For I Cant Reset It.and Active Synce Doesnt Reconise The Phone So I Cant Even Install A New Rom On It,iv Presses The Reset Button Loads Of Time With No Joy Can Anyone Help Me Out Please...thanx It Was Working Fine One Day Then Froze On Me And Now It Wont Come On To Windows
Copied from the Wiki page.......
Soft reset: Use the stylus to lightly press and hold the RESET button on the bottom of your device.
Hard reset: Press and hold the Left SOFT KEY and Right SOFT KEY, and at the same time, use the stylus to press the RESET button at the bottom of your device. You will be presented with a menu saying 'press SEND to restore factory default, press END to exit', if you press SEND Your device will be set back to factory default settings.than Press "OK" to boot
(The L/R soft keys are the "--" keys just above the the Green phone and Red phone buttons) You can also use clear storage in settings. WARNING!!! HARD RESETTING WILL ERASE EVERYTHING ON YOUR DEVICE. MAKE SURE YOU HAVE A BACKUP!
ok thank you
will try it now ,,but phone is totally stuck on start up screen wont even go in to windows,,but will give it a go ,,cheers...
hi there
thanx allot for your help it did work and managed to reset the phone cheers...your a life saver thanx ....
Hi,
I got a little annoying problem that I can't seem to get fixed.
I don't get any vibrations whenever I get a notification apart from Whatsapp and Instagram.
So Mail, Snapchat, ... nothing.
Notification sound does work though!
But I got some more information which might help troubleshooting.
I use Lightflow because I don't want to have the LED except on very certain apps and I disabled these really annoying Banner notifications completely with the ADB command "heads_up_notifications_enabled 0"
I am pretty sure that I had working vibrations before the ADB thing but I don't see a real connection between Banners and Vibration especially because WhatsApp works correctly, just everything else doesn't.
I tried this solution but it didnt work:
Code:
Go to Setting -> Apps, click on the 3 dots in the upper right hand corner and select "Show system apps"
Scroll down and click on "BadgeProvider" app
In app properties, click on "Storage", clear both the Cache and Data.
Shut down the phone and following the directions below to "wipe cache partition".
Wipe cache partition
Turn off the device.
Press and hold the Volume Up key and the Bixby key, then press and hold the Power key.
When the Android logo displays, release all keys ('Installing system update' will show for about 30 - 60 seconds before showing the Android system recovery menu options).
Press the Volume down key several times to highlight “wipe cache partition.”
Press the Power key to select.
Press the Volume down key to highlight “yes” and press the Power key to select.
When the wipe cache partition is complete, “Reboot system now” is highlighted.
Press the Power key to restart the device.
Galaxy S9
Telekom
Unrooted
ADB: Changed Banners and Ran the bxActions thing
I hope someone has an idea.
Thanks
EDIT: Okay it's solved. Apparently the mail program decided to switch the vibrations off by itself randomly and in Snapchat it was my stupidity to overlook the settings. Nevermind then