Hey all,
I've seen a thread on this somewhere on the board, but I can't seem to find it anymore. I just recently inherited a Dopod 900 and threw jwright's ROM onto it. It's 1.90.96.
I've also got an i.Tech Clip S, which worked fine with my old, old iPaq h6365. Fortunately, it all connects and is fine, but when I actually play anything in WMP or otherwise, the sound only comes out for the first split second when it plays, and then it disappears. The buzzing sound still says, though.
Can anyone help to resolve this? Any help is, of course, muchly appreciated.
Related
Hi,
First of all, thx to all chefs for the great ROMs. I tried all WM6 (LVSW, Black, Dopod) and they work well except the sound doesn't go thru the speaker anymore. I can only hear the ringtone, alarm, MP3 ... etc via headset. I read one post similar to this but I couldn't locate it again (I searched half a day already). It seems that only a few people experienced the same problem. I also tried LVSW's fix WM6 sound patch, it doesn't help. I appreciate if someone can shed some lights.
Thx.
finally locate the previous thread. It is a hardware problem. There is some problem with the speaker wire. It is very close to the stylus. To reproduce the problem, I took the stylus out, then slide the keyboard out a few times may enable the sound. Once the sound is back, play an audio file and before the audio finishes, push the stylus back and the speaker stop immediately.
And I have to say MrVanx guide is pretty good. I followed the instructions and already downgraded my OS and ExtRom. Now downgrading the radio. So far so good. And those tools NBHextract and RomKoch are amazing tools.
Thx to all for the great work! Eventhough I have to take my PDA for servicing tomorrow. Tough luck sound was gone right after upgrade.
Same problem here. have u figured it out.
Updated to black then dopod then lsvw then newest lsvw.. i thought it was may a drop or a ardware issue. no speaker output all
Hay guys. I updated my 8525 to WM6 around Thanksgiving, and everything was great. I had no problems at all. I decided to whip out my old i-phono stereo bluetooth headset and try it out with the superior A2DP quality on WM6. It worked really well, though I decided to go ahead and remove the BitPool and MaxSupportedBitPool registry keys as well as most people suggest for increased quality. It worked really well up until yesterday when I tried using my headset, and everything went wrong. When the headset syncs with the phone, the phone starts facing a lot of slow down. The worst thing is that when I try to play music, the music stutters hella bad, and the quality is very low. It's almost like the phone is super busy type of poor playback, which can happen even without using bluetooth, though the problem is exacerbated when trying to stream music data to the headset.
Short of a hard reset, I haven't a clue what to do, or why it is doing it all of a sudden. I've already tried the task manager fix, and related .cab fix, but it did nothing for me. Really ticks me off....
WTF guys!?!
Same Problem Here I Think
I upgraded my 8525 to WM6, reinstalled all my aftermarket ware and suddenly the stream to my Motorola S9s is all static filled and has a very low volume. Everything else works great. Even the 4Gb SDHC card...
I've been all over the net looking for others with this problem and you're the first I've found.
I'm actively looking for a fix and will reply to this thread if I find one.
Hi Guys,
I have a simular probelm, I am Using Schaps WinMob6 3.56c Multi with a Motorola S9 BT Headset, on an HTC Hermes. The Volume iss ok, sound quality decent, what's driving me crazy ist:
As soon as I start playback everything slows down so bad that it is almost impossible to use the phone. Opening Opera takes about 60sec. Menus lag badly. I have tried playing with the settings nothing helps.
Setup:
Use Joint Stereo: Yes
Sample Rate 48000 (for some reason i can not change this)
Bit Pool: 86 (default)
Max Bit: 86 (default)
Changing the Bitpool seems to make no difference
To summ it up
Help would be appreciated!
If I find something that helps I will post it here ASAP,
Have a good one,
Chris
I honestly can't believe nobody has an answer...
Have U Read this http://forum.xda-developers.com/showthread.php?t=352054 ??
Grüsse,
Chris
Thanks, that helped a bit. Still no solution though...
I have recently bought the Jabra BT320s Bluetooth headset for my Vario II. It all seems to be working well except that after about 10 seconds of music the sound will cut from the headphones back to the phone. This problem occurs everytime i try to use them. I'm currently using Schap's 4.01 lite. Has anyone experienced similar problem?
There seems to be some ongoing issues with BT that arise in various forms from time to time. If you have a look at this link or this one you may find some helpful discussion.
I have a continual battle with my Jabra BT8010. Tried to upgrade to its latest firmware, only to discover that I have to re-pair the devices every time I want to use them. Luckily, I still had my older firmware file, so I was able to go back to that one.
I suggest that if you search these forums enough, you should be able to find something that may give you a fix.
I have a Cavalier with it's original WM6 (not 6.1) ROM and I am having some stereo bluetooth headset issues and wondered if anyone has a solution.
On my Jabra BT320s (with Latest firmware) as well as my Motorola DC800 I have issues with it playing consistently. From time to time it will start to loose it's pitch. This sounds a lot like an old record player with the disk slowed down. This will continue for some time and then be ok for a bit again. It can also have drop outs from time to time as well. I've tried insuring nothing is running in the background, and even turned off the cell to insure the phone is not getting busy. In reading around the web this is not an uncommon issue. Has anyone had this problem and found a solution? Is the BT stack in 6.1 better than in 6? Is my solution to upgrade to 6.1? Could anything else be the cause? This never happens with a wired headset btw ...
Thanks in advance for your time, I love my Cavalier. Probably one of the best WM devices I've played with to date!!
Dear XDA-Developers and users,
For 4 months now, i have my (T-Mobile) Raphael and it's been working great. I have the latest (dutch) HTC ROM installed and that made my Raphael faster.
PROBLEM
Since a few days now, i have a problem with my headset. Actually the problem is not my headset, but when i pull it out of my cellphone.
- The Headset icon stays always in the top bar of Windows Mobile.
As a result, I can't hear my music trough the external speaker. And even worse:
- I can't make a call without the headset plugged in because I can't hear the person speaking and my internal mic doesn't work.
Has anyone ever had this problem? I've searched the internet using Google and I found some articles of Treo user who had the same problem. They recommended pulling in and out the headset, so it would 'reset' this function. So i've tried, it wouldnt work on my Raphael (else i wouldn't start this threat, would i? )
SOLUTION (?)
At this point, i think a great solution would be a little (registry)tweak which can switch on/off the headset-sensor.
Any ideas (or solutions)?
I'd like to hear from you!
Greetings
A Dutch Touch Pro user.
Nobody of you guys ever had the same problem?
Maybe i should create a threat in the Raphael topic?
i have the same problem on polaris
does anyone konws how to fix this??
rukako said:
i have the same problem on polaris
does anyone konws how to fix this??
Click to expand...
Click to collapse
Even i am facing the same problem....but when i installed the Android on the phone, it worked perfectly and in the windows, the same problem is occurring....