I have recently bought the Jabra BT320s Bluetooth headset for my Vario II. It all seems to be working well except that after about 10 seconds of music the sound will cut from the headphones back to the phone. This problem occurs everytime i try to use them. I'm currently using Schap's 4.01 lite. Has anyone experienced similar problem?
There seems to be some ongoing issues with BT that arise in various forms from time to time. If you have a look at this link or this one you may find some helpful discussion.
I have a continual battle with my Jabra BT8010. Tried to upgrade to its latest firmware, only to discover that I have to re-pair the devices every time I want to use them. Luckily, I still had my older firmware file, so I was able to go back to that one.
I suggest that if you search these forums enough, you should be able to find something that may give you a fix.
Related
As everybody know, its quite annoying use Universal as mobile. then, i decided to start to use the Bluetooth headset!
But doesn't work all the time.
If i set one headset, it works fine for few hours, then, after a while, without any message, bluetooth in my Universal turns off it self!!
At begin i though that would be my headset, then i tested with my other headset, and is the same!
Beside that, when i try to pair it them once more, it has static on it.
So, to be able to use it again, i need to:
- Remove device in my bluetooth list
- restart headset
- Search for device once more
And then, it works for a while again.
Well, i have tested in two headset over here, The Dopod H1 and Targus.
Does anybody knows what is going on or had same problem?
Thanks in advance!
Same here
I have experienced the same problem with my JasJar. The bluetooth radio seems to turn itself off from time to time. I think it is somehow related to WM2005, because I had the same issue with a Himalaya running WM2005. What is weird is that the blue light continues to blink. If you go to the wireless manager applet, it sometimes shows the bluetooth as on and sometimes as off, but if you go to the bluetooth setting, it shows the radio as off.
Any suggestions?
TIA
Panabax
Buzz_lightyear may have the solution here: http://www.buzzdev.net/index.php?option=com_content&task=view&id=60&Itemid=41
I'm trying this at present. BT stayed on overnight, despite very low battery, and I'll put it into use all of today. If I go a full day without losing BT then it's solved for me cos I was losing it ALL the time 2 days ago.
Hmm, I had a better day with this reg hack - but I did lose BT once. SO, inconclusive at present.
Guys - I have searched the whole internet and can confirm that there is a problem with the ROM
Until it is fixed Bluetooth will not work as it should
This is a problem i had with original jasjar rom (september 2005). First official upgrade and all subsequent roms have solved this problem. I'm actualy using helmi's aky 3.5 1.3.1 and sony hbh660 dayly without any problem.
Anyone had any success pairing the JABRA BT320s with MDA 2 and if so, do all the functions of the bluetooth stereo headset work?
Thanks.
Upgrade
Purchased Jabra BT320s and paired with Vario 2 after upgrading ROM. Everything working fine with excellent sound quality. I did not try to pair with Vario 2 on old WM 5.0 ROM so I cannot say if the BT320 would work on this OS.
I DID try to pair a BT320s with my TyTN a while ago, no luck......im going to try again now, as i was quite annoyed it didnt work. Will report back soon.
EDIT:: Gonna need to get a plug adapter as i forgot the dumbasses i bought it from sent an EU power supply and not a UK one...LOL!
from what i remember it was around JUNE time when i tried it, sounds like the bluetooth drivers may have changed since i tried it but it did seem as if the headset was the problem and not the drivers as i have had other A2DP headsets working fine.
Jabra BT320's
Bluetooth can be a real pain at times - with unpredictable results. I cannot begin to tell you how much wasted time I have spent trying to pair gadgets together - so it was a pleasent surprise to find the Jabra's paired first time and functioned as described.
Wishing you LOL.
tange.
well i tried it again and even on my pretty up to date ROM it only pairs as a headset and not wireless stereo urgh!
may be worth a rom upgrade?
i have a 320s (uk version bought from a tmobile shop - their selling them for 25quid) and it works fine on my wm5 spv m700 and is detected as wireless stereo and headset
mrvanx said:
well i tried it again and even on my pretty up to date ROM it only pairs as a headset and not wireless stereo urgh!
Click to expand...
Click to collapse
i had the same issue with this thing ... i did a hardreset and it showed up as stereo headset again. i had to do one anyway...
@all how do you like the jabra? mine is quite noisy ... i use my ugly samsung speakers instead and thinking about buying a 3.5mm adapter for the car.
I have been playing with the bt320s for a few days on different roms for my wizzard. I have been tring some WM5 and WM6 roms for features and bluetooth options. What i found was that I could pair with WM5 but even if it gave me the stereo option it was only in mono. After a google search i found someone mentioing that WM5 only supports Mono.
I then tried a couple of WM6 roms and found that they all supported the stereo correctly.
I then hit a problem as I decided that a ROM i tried earlier had everything i wanted (Diamond). So, decision made, I flashed the rom and tried to pair and it would only pair on headset and not offer the stereo. Very wierd as it worked before????.
I then found a post on another site which mentioned the following with the Bt320s headset.
1) delete any pairings on the phone.
2) switch of headset
3) plug the charge into the mains
4) put the charge into the headset 3 times for 5 seconds each.
5) Recreate the pairing with the phone.
Sounds wierd but it worked??????
I now have a wm6 rom with stereo bluetooth.
the only problem now is that WM6 closes all my apps when i switch it off and on using the power button.
This seems to be a bug when you enable a security pin in WM6 which i am forced to do via a directpush policy from work. Does anyone know a workaround for this as it is anoying to have your cub/pointui/media player etc close on you and go back to the home screen whenever I use the power button.
*****Orange are selling the Jabra BT320s online for £9.50 at the moment. Well worth the money*********
Quick update, on the latest pandora ROM (Tytn) ..... Its working great.
OhtwoXDA2 said:
1) delete any pairings on the phone.
2) switch of headset
3) plug the charge into the mains
4) put the charge into the headset 3 times for 5 seconds each.
5) Recreate the pairing with the phone.
Sounds wierd but it worked??????
Click to expand...
Click to collapse
Just tried this trick and it work! I have a Jabra BT620.
I have a Cavalier with it's original WM6 (not 6.1) ROM and I am having some stereo bluetooth headset issues and wondered if anyone has a solution.
On my Jabra BT320s (with Latest firmware) as well as my Motorola DC800 I have issues with it playing consistently. From time to time it will start to loose it's pitch. This sounds a lot like an old record player with the disk slowed down. This will continue for some time and then be ok for a bit again. It can also have drop outs from time to time as well. I've tried insuring nothing is running in the background, and even turned off the cell to insure the phone is not getting busy. In reading around the web this is not an uncommon issue. Has anyone had this problem and found a solution? Is the BT stack in 6.1 better than in 6? Is my solution to upgrade to 6.1? Could anything else be the cause? This never happens with a wired headset btw ...
Thanks in advance for your time, I love my Cavalier. Probably one of the best WM devices I've played with to date!!
Sorry if I'm posting a question that's been answerred before, but I haven't been able to find a thread to this problem:
sometimes my Nokia BH-102 will disconnect in the middle of a conversation in the car. The only option at that time is to pull the TP2 from it's holder and put it to my ear.
Whether it's the headset or the phone, I don't know, but it used to work in combo with the old Nokia E60 I used to operate......
Chances are it's the TP2, but how to fix it?
Only 'tweak' was to install tomtom, but without the 2 dll's which have been causing some problems.
Has anybody experienced anything similar?
Bluetooth visor problem
I have had problems with my headset - Supertooth Visor One Bluetooth Car Kit. Not quite the same as you though - the problems I have is that when I make an outgoing call, everything works fine but when I recieve an incoming call the audio stays on the handset rather than coming out of the bluetooth headset - which means I have to pick up the phone. I also have installed TomTom 7 and I had to do the 2 dll fix as my bluetooth was completely broken otherwise. So I guess maybe TT7 is responsible in some way. Only thing is, I dont want to do a hard reset to find out!!
I'd already read about the Tomtom BT-issue so I cleared the 2 dll's out of the cab prior to installation.
So the originals should still be in use. BT is/was working and I have been synching using BT. That's not the problem.
There should be threads out here pointing you to the original dll's. you could past them over the current ones and see if it helps.
I experiencing the same problem, and didn´t install tomtom.
So now it looks like it's a problem in the TP2 then.
Hopefully a BT-guru can investigate? This is way beyond my capabilities.
In the meantime I'll know what to do if and when it happens: take a chance on the cops seeing it and issuing a ticket.....
I'm having a similar issue, my headsets plural, have this problem. It will disconnect but what is happening is the headset is shutting down. If I hold the power button on the headset it comes back on and will work again.
If it was one headset I would think it is faulty but I've had this problem with three headsets and the Bluetooth in my car.
Is it possible that the phone is sending a shutdown command? BTW I am using the stock TMOUS 6,5 ROM and have tried some of the cooked ROMS with the same effect.
Yesterdaty I updated to WM6.5 and now try to get everything working again. Somehow my TP2 won't pair with my bluetooth carkit anymore. With WM6.1 this was no problem. The phone still pairs perfectly with my computer (also bluetooth connection) so I think the bluetooth connection is ok.
When parining to my carkit it finds the device, then I have to enter a password on the TP2, and after that it just sais "pairing connection failed", and it will not work. I am sure the password is not changed since yesterday. I tried it several times. I do not know what to do anymore. Could this be a setting somewhere? I get the feeling my password is not send properly but have no idea.
Meanwhile I tried pairing my carkit with another phone and no problems there. So my conclusion is: something has changed with bluetooth, updating to WM6.5 which makes it now impossible to pair my TP2 with my carkit.
Is there maybe a programm for the TP2 which give me more controll over bluetooth (like maybe go to an older standard)?
I have exactly the same problem as you
good to hear I am not the only one. Hope someone will come up with a solution for this.
I did nor observed any issues when pairing my TP2 after reflashing to WM6.5
There is another issue however - I can not hear any voice until it is charging.
Unplugging of the charger fixes this issue immediately. Horrible...
Seems, HTC guys are saving money on testing by using us as Beta Customers.
Would a custom ROM be a solution for us?
I updated to the "energy 6.5.1 rom" and guess what..............
The same problem. The rom is very nice, but my TP2 still won't pair with my BT carkit which is very big problem for me.
Is there maybe a way to downgrade just the BT part of a rom to WM6.1. I read on different forums there is something that is called a BT stack. Could this be the problem?
I have a ton of problems with bluetooth pairing now. However, I don't know whether it's the fault of 6.5 or the Tilt 2. Here is what I am experiencing...
- On car deck or headphones, the skip buttons don't do anything
- on car deck or headphones, I have to disconnect Stereo Audio and then reconnect to actually get sound. It NEVER works when it auto connects.
- Music will do a brief skip when you shut the screen off
- Stupid message about volume control every time it connects (resolved by switching to custom rom)
- SMS or any kind of alert tone now turns music way down so that the tone is the only thing you hear. Which is super awesome when I'm driving my drunk friends around and they are singing along to a song when suddenly it mutes so everyone can hear my incoming text message.
Not a single one of these issues existed when I had my Fuze.
Same here
My bt headset (sony hbh ds970) and simply does not find the pairing...
I asume is a problem related to energy´s ROM
orb3000 said:
Same here
My bt headset (sony hbh ds970) and simply does not find the pairing...
I asume is a problem related to energy´s ROM
Click to expand...
Click to collapse
No I do not think so, because I used the official WM6.5 with the same problem. Does someone know a way around this issue. I strongly believe that if only I could pair I have some options to work with it (in 6.1 it worked like a charm). If I only could pair without having to send the passkey it would be great step forward. I presume with sending the passkey, the bluetooth of the TP2 sends out other "rubbish" that confuses my carkit.
My problem is solved and guess what, it had nothing to do with my TP2. The problem was my carkit. It has a maximum number of bluetooth devices (5) it can pair to and the last one (the WM6.1 version of my phone) had been reached. So a hard reset on the bluetooth carkit and the problem was solved.
Well, at least I now know how to flash a rom to my phone and I think I learned more about the phone reading through all the forums. Thanks all for thinking with me on this problem!
Does anyone else still have this problem?? I have removed all the devices from my car and continue to have the same pairing error just after entering the passcode. Stock Spint ROM worked great, but multiple 6.5 upgrades don"t pair..............suggestions/ideas??????
bluetooth settings, advanced, enable beam data exchange,check the box
Interesting.....I actually found a fix. Instead of pairing the phone with the car, I paired the car with the phone. I didn't even know that this was possible, but it did the trick!