Help! Need to Reassign/Disable Hardware key..
My ‘End Call' Key (the red one) has gone crazy, sticky crazy.. Although it doesn’t seem depressed it keeps pressing down causing my apps to close and my phone calls to get cancelled!!
I’m sure repairs will probably be costly.. Is their a way to Hack/Disable the ‘End Call' Key or just re-assign it to do nothing ? so that my phone can come back to life
Much appreciated..
Try AE Button Plus.
V
Thanks that does the trick, takes a bit to kick in as it runs at startup but seems to work after that..
Ill be using that for now, but am still on the lookout for a proper OS hack as not to take up any system resources.. cos although AEBPlus is handling the button, its still firing off continously in the background..
thanks
Related
I don't know if it's coincidence, but ever since I upgrade to WM5 and went back to WM2003SE, my navigation button has not worked the same.
For example, a lot of times I can go right, but can't go back left even after multiple presses, and then most of the time the middle or 'Enter' button doesn't do anything. Itz become extremely annoying because I have lost my 4th stylus by now, and I haven't received my new ones yet. Oh, and I can't play MorphGear right anymore.
Is it just hardware? Cuz I first went to ROM v.1.42 and then went to 1.40 to see if it was a problem with the new ROMs, but I still have the same problems. Any one else having these issues, and has any one fixed it??
UPDATE: WTF!! Now it went from bad to worse. Yesterday, when I left my BA at home, once I returned from work I noticed that PIE was constantly opening over and over again. Then some of the buttons wouldn't respond like the POWER to turn it off. The backlight pretty much stayed lit the whole time because it looked like the keys were stuck. I upgraded to WM5 derived from the Himalaya today and now the START menu comes up almost every 5-8 seconds, followed by a real quick succession of multiple "clicks", and my 'Start' button doesn't seem to be responding.
Can anyone help? Has my BA gone to the state of retardation? Is there a way to bring it back??
How did you go with this problem.
Mine is doing similar ever since a low battery problem.
DLC
I am experiencing the same kind of problem... and it happend after upgrade to WM5. But the problem likely to be caused by hardware.
I had problems with my phone opening up the start menu, opening IE, and closing programs immediately after opening them, Of course I had dropped the phone halfway in a cup of ice water, but immediately after tossing it in water (after hanging up, I simply dropped the phone into the cup-holder I have mounted below my stereo which happened to be occupied by a glass of ice-water I placed there without remembering) I shook the water out of the phone, and for about as much as i could stand the heat, I put a hair-dryer to the end of my phone which i pryed open after removing as many screws as i could. After a day of quirky behavior, and a night of having the battery seperated from the phone, my phone is back to its old self with the water-damage seal unnaffected after missing the line of water by just a few milimeters. I suggest going to Settings>Buttons and making every button perform no function at all followed by going to Settings>System>Button Lock and having all keys locked except your power button. Hope this helps!
Having somewhat the same issue. Only the "Down Navigation button" isn't working. Although, I'm still using Windows Mobile 2003 SE. Is there a DIY fix for this?
bump...
any suggestions?
Navigation Up/Down
Mine isn't working either - is this a hardware fault?
trying pressing down a bit harder. coz when i did that for mine, the "down" button works. normal applied pressure as for the rest of the buttons(left/right/up) does not seem to work with the "down" button, but a bit more force would make it work.
this happens to my IIs.. mebbe u can try.
Button problems
After no trauma or dunks in water several of my buttons have gone awry. My green phone button, red phone button and navigation buttons all open contacts. The green phone button activates voice command at the same time that it opens contacts. I've never switched from WM2003SE. I've checked the buttons settings and they are the same as always. Most bizarre of all is that my battery is quickly discharging. I suspect some software process is running hard but don't have any idea where to start to fix this. Soft resets have not helped.
buttons gone crazy
A hard reset fixed the problem but was a typical pain to get everything back going. Sprite backup works great until the first attempt to ActiveSync with your PC.
Hi,
I've been looking for an application that would enable you to select which buttons should be locked when the device is off. Right now, the only options are "none" or "all but the power button".
I'd like to lock all the hardware buttons except the "record" key (which I have mapped to MS Voice Command). That one isn't easily pressed by accident, so it wouldn't turn my device on all the time and waste battery life, and I'd be able to start MS VC without pressing the power button first.
Any ideas?
Don't want to be pushy but... *bump*!
Anyone heard of an application that does this? Or any developers interested in making one? I'm thinking... Vijay?
I think it could possibly be done, using a low level keyboard driver hack, but I'm thinking it'd be a little bit messy to program right now, I've got a few other things to finish first.
I'll try to test some ideas, but can't promise to release anything very soon
V
Hey, thanks for your reply! You don't have to promise anything... I was just trying to inspire you. But you have to admit it would be a useful app!
my xda2s recently experienced a problem which consists of the volume bar keep going up and up making the 'end' noise repeatedly, and if say the volume bar on the side were to be pressed down, it would go down n go up again...
secondly, the power button is not functioning well, it can turn the phone on by clicking it once (as usual) it can turn the backlight on and off by holding it (as usual) but it wont turn off by pressing it once, or anything...
help please, thank you
doesn't happen with any of my 3... sounds like you've got them there problems.
pYroboy,
let me know if you found the resolution. My problems are similar to yours...
Thanks.
doesnt happen to any of my two BA...
try opening up your unit and clean up the contacts.
I did open it, but could not figure out which contact to clean. Power switch is sooooooo freaking small, I did not figure out what I could clean there, it seems that it is 2x4mm in size soldered for good to the board. Same about volume rocker/switch on the side.
How is it possible to clean them??? I could not figure out what could be cleaned there without detaching the switches from the board.
Does anyone sell these parts? Maybe it would be easier (although not easy also because they are so freaking small) to replace them??
Guys, need advice from you... from the ones who fooled around with similar parts...
Thanks.
try an air brush. or a fast evaporating contact cleaner.
just make sure you apply enough pressure not to blow the sensitive parts away.
*just becareful
OK. Thanks. I'll try that. But where do you people get that stuff. Do they sell it in electronics stores, or I need to look someplace else?
I need to do something anyway, because today I can't turn ON. I used timeout of 1 minute on battery power to power it OFF. But not being able to turn the whole thing ON really put me down....
Is there any program to remap Power On/Off button to Recorder or Media Player buttons on the side? They are all 3 the same switches. If it would be possible, I'd get by using one of those buttons.... Just running out of freaking ideas here....
contact cleaners can be found in your local radioshack(i.e. electronics or computer botique/shops).
regarding the power button i think that is hardwired to be the only powerbutton for the unit. sad to say you cant map it to powerup your BA.
pecq said:
OK. Thanks. I'll try that. But where do you people get that stuff. Do they sell it in electronics stores, or I need to look someplace else?
I need to do something anyway, because today I can't turn ON. I used timeout of 1 minute on battery power to power it OFF. But not being able to turn the whole thing ON really put me down....
Is there any program to remap Power On/Off button to Recorder or Media Player buttons on the side? They are all 3 the same switches. If it would be possible, I'd get by using one of those buttons.... Just running out of freaking ideas here....
Click to expand...
Click to collapse
Assuming you have the button lock enabled you can wake it up by receiving a phone call, and then disable the button lock and use any button to wake up/turn on the device. This is not the most elegant solution, but if cleaning fails to fix it then it may be your only option.
Alright my phone just started to act up last night ! My phone just started to take pictures on its on the camera would turn on and sit there and take them. IDK why!!! Also the biggest problem i am having it that my D-pad shuts off!!! when i try to use the soft keys they will not work for me. The Screen works fine! but when the soft keys don't work my keyboard don't work but the phone know i am using the keyboard as in when i press the space bar it brings down the start menu! Also when the soft keys dont work i use the on screen keyboard to type and that is even F%#!%# UP!!! i type on the on screen keyboard but i can not use the backspace on the or arrow keys. Also the scroll button on the side stops working on me also. when i am in call my soft keys shut off and i cant end a call!!! Now the weird thing about all this is i can turn them all on just by pressing one of the top soft key. (the Msg or internet button) and then everything starts to work again. now i have no clue what is wrong with it and i have tried everything from reinstalling the OS to Clearing the OS and that has not helped ! i really hope its not a hardware problem !!! Right now i have my Camera button off and the camera does not take pics on its own right now but my screen does turn on and just sits there and does nothing. But if anyone can help me solve this problem i will Donate to them = D!!!! Please Help Me Out ASAP!!!
Thanks!!!
well thats screwed upp. lol
yea i cant help you. i just wanted to tell you how screwed up it was.
I would try a hard reset first and/or rom reflash.. if that doesn't work better buy you a parts doner phone
The keyboard on my TP2 (Verizon) intermittently stops working (no key press registers, however the buttons on the face of the phone still do). After soft reset it works again. This is with different ROMs. I'm thinking, perhaps, there is a loose connection internally. It also has odd crashes, but this might only be a ROM problem as it is much less pronounced with the latest ROM I'm using (Elite team ROM).
Diagnosis? I'm reluctant to send it into Verizon for just this, as its only occasional. Wondering if anyone has experienced the same thing
I'm having this same exact issue. I'm using the latest ROM from HTC. Sometimes when I open the keyboard in an app, like texting or email, the keyboard is genreally non-responsive. When it's in this state, the enter key goes to windows Apps but all other keys failed to work. I also test by pushing the FN to see if the FN light tunrs on.
What's strange with mine is the keyboard will work when it's open like for phone use, but when open with an app like text/email/bing, it doesn't...
Like previous poster, not sure if hardware ro what...
This may not have anything to do with your problem, but..
I have the PTT button on my tilt2. I have a case that wasn't designed to encompass that button, so it gets covered up (I had a find time finding a case that did actually fit!)
I have the PTT button assigned to do nothing, but with it being pressed down, it makes my keyboard non-responsive as well as disabling the arrows keys on my touchscreen. It will however work for a while after restarting my phone, but it always goes back to the same thing.
Sukuiku said:
This may not have anything to do with your problem, but..
I have the PTT button on my tilt2. I have a case that wasn't designed to encompass that button, so it gets covered up (I had a find time finding a case that did actually fit!)
I have the PTT button assigned to do nothing, but with it being pressed down, it makes my keyboard non-responsive as well as disabling the arrows keys on my touchscreen. It will however work for a while after restarting my phone, but it always goes back to the same thing.
Click to expand...
Click to collapse
Thank you very much for posting this. I do have the same exact setup, I have the PTT button unassigned and I too have a cover that covers it. So maybe it's pressing it down causing the problem.
I hope this is it and really appreciate your post...
UPDATE:
Sweet, I just checked things out. removed the cover and it would the keyboard doesn't go non-responsive when I push the PPT button, and works when I don't...
By George, I think you got it!!!!
GREAT!!!!