Overclock - JASJAR, XDA Exec, MDA Pro Software Upgrading

Hi
Anyone had any joy with overclocking one of these, or is there any software that will do it.

s2tephen said:
Hi
Anyone had any joy with overclocking one of these, or is there any software that will do it.
Click to expand...
Click to collapse
Hello,
I've tried XCPUscalar but my MDA Pro hangs if i try to overclock to 624MHz.
So i think it is not possible to overclock the Universal.
Regards,
Schmia

schmia said:
Hello,
I've tried XCPUscalar but my MDA Pro hangs if i try to overclock to 624MHz.
So i think it is not possible to overclock the Universal.
Regards,
Schmia
Click to expand...
Click to collapse
Can't confirm that. With the new XCPUScalar (Ver. 3.0) it works quite well, specially the autoscale facility.
Info and DL here.
http://www.immiersoft.com/download.htm
Cheers
hrb

My CPUscalar version was v2.98.
Regards,
Schmia

Is it safe to overclock Uni till 624? My previous gadget Himalaya carring 400MHz on board easily worked on 520 MHz. Hope the same story with 520-624.
Is 624 MHz enough to watch video in VGA (640*480) mode?

yes, its enough, but even 520Mhz is enough for watching VGA DivX Videos with TCPMP.

hrb said:
Can't confirm that. With the new XCPUScalar (Ver. 3.0) it works quite well, specially the autoscale facility.
Info and DL here.
http://www.immiersoft.com/download.htm
Cheers
hrb
Click to expand...
Click to collapse
Have you tried version 3 if it actually works at 624 using XCPUScalar on the Universal?
On my test using version 2.98 before, I could only get it to run safe up to 520. If I run it at 624, it hangs.
I have version 3 but, I have not installed and tried it yet.

Xscaler Ver.3
Hi
Installed on my uni last night works brill. 624mhz

Some Universals work at 624Mhz and some don't. I don't think the version of Xcpu Scalar makes the slightest bit of difference.
I've seen all available versions of Xcpu Scalar used with four different Uni's and all versions have failed on three Uni's, while all versions from have worked with the fourth. (Two of devices of my own, and two different friends' devices)
Just the luck of the draw, methinks!

That sucks, I guess the one I got can only run as fast as 520. But I still consider myself lucky, I have not encountered any problems with my Universal except I had to buy an extednded battery for it to make it last a little bit longer.
But I will try XCPUScalar version 3 as soon as I have time, about 2nd week of December. Plus, too many developers are releasing such nice AKU 3.2 ROMs that it is just too much to install everything then the next day you find out there is a newer version already.

Related

Question about flashing a Kaiser

Word on the street is the Kaiser will appear on September 3, 2007 via AT&T and be known as the 8925. See http://crunchgear.com/2007/08/09/breaking-att-tilt-price-and-launch-date-leaked/
So, question: Have any of our insider cooks gotten their hands on a Kaiser? And, if so, what's the process like for flashing one? As painless as the 8525, or a chore like the 8125?
While we're talkin' about it, what is the technological spec differences between the Kaiser and Hermes? Other than a fancy flip feature, I cannot see a spec which leads me to believe it's any better than the Hermes.
Thanks,
J
why don't you go read up in the kiaser section of Xda! this is the hermes part. the specs blow the 8525 away go do some research.
I did read up on it prior to the post. But, thanks for the words of wisdom.
Having read up on it, my thoughts are: you are easier to impress than I. As a slower CPU and larger RAM doesn't equal something blowing away something else. In light of that, I thought there was perhaps I was missing.
J
IronManDS said:
I did read up on it prior to the post. But, thanks for the words of wisdom.
Having read up on it, my thoughts are: you are easier to impress than I. As a slower CPU and larger RAM doesn't equal something blowing away something else. In light of that, I thought there was perhaps I was missing.
J
Click to expand...
Click to collapse
wow u really need to learn how to read more before posting. the cpu on the kaiser is a qualcomm 400mhz dual core cpu as far as i know. our hermes have a 400mhz since core. difference is that the kaiser has 1 core to handle phone functions and another to handle programs making it superior to the hermes. go on modaco and read what paul has to say. when u add hsupa, 7.2mbps hsdpa, 256 rom, 128 ram, tilt screen, improved scroll wheel, slides other way, touchflo, gps, 3mp with a good night mode and good sensor, better keyboard, lights for function and caps above keyboard, and do all this in a thinner package then u know u got a good upgrade to the kaiser. by the way, roms will be just as easy to cook as on hermes. all u need is to get a kaiser to olipro to do cid and simunlock and hardspl and get a cook like me a kaiser and ull have great roms. i seen the roms and have dumped them so i know.
Thanks for the detailed reply. That's exactly what I was looking for!
As for the CPU, the wiki here states that it's a 384MHz, not 400. But, most other things I've seen say 400. I didn't know it was dual core, so appreciate that info!
And, with the specs as you detailed them, I'm now excited and thinking about an upgrade! But, the wiki's details are not so stimulating
Also, I would imagine you're right re: flashing, as the Kaiser is quite similar to the Hermes. I was just having horrible thoughts of flashing my kid's 8125 and hoping that I wouldn't be buying myself a headache if I purchase the Kaiser.
Thanks again!
J
woa!! its dual core... really awesome too bad the resolution stay the same as hermes if only it was better, like 640x480 or maybe more like toshiba portege G900 having a 800x480 resolution screen...
I can say it`s an awesome device !
IronManDS said:
Thanks for the detailed reply. That's exactly what I was looking for!
As for the CPU, the wiki here states that it's a 384MHz, not 400. But, most other things I've seen say 400. I didn't know it was dual core, so appreciate that info!
Click to expand...
Click to collapse
From what I can recall, the Samsung chips outperform Intel chips by a good margin -- when the 300Mhz Samsung was introduced a few years ago it held it's own with the then industry standard Intel PXA 25x clocked at 400Mhz. A 200 Mhz TI OMAP conserves power better than an intel clocked to the same frequency. In that sense, comparing the clock frequencies isn't all that revealing.
Who knows how the Qualcomm chips perform compare to the Samsungs? For all we know a dual Core Qualcomm could be worse that the 400 Mhz Samsung in the Tytn. It's unlikely, but not unprecedented that WinCE PDA specs stagnate or get worse from one generation to another. When HP took over Compaq a few of the iPaq lines ended up with slower processors.
Personally, I'd wait to see some benchmarks on the Kaiser before I buy.
rob.ocelot said:
From what I can recall, the Samsung chips outperform Intel chips by a good margin -- when the 300Mhz Samsung was introduced a few years ago it held it's own with the then industry standard Intel PXA 25x clocked at 400Mhz. A 200 Mhz TI OMAP conserves power better than an intel clocked to the same frequency. In that sense, comparing the clock frequencies isn't all that revealing.
Who knows how the Qualcomm chips perform compare to the Samsungs? For all we know a dual Core Qualcomm could be worse that the 400 Mhz Samsung in the Tytn. It's unlikely, but not unprecedented that WinCE PDA specs stagnate or get worse from one generation to another. When HP took over Compaq a few of the iPaq lines ended up with slower processors.
Personally, I'd wait to see some benchmarks on the Kaiser before I buy.
Click to expand...
Click to collapse
I've seen some benchmarks and they all SMOKE the Hermes.
http://www.cdmatech.com/download_library/pdf/msm7200_chipset.pdf
thats the spec sheet for the processor. according to it there is a 400mhz application processor and 274mhz microprocessor. also shows hsdpa up to 7.2mbps and hsupa up to 5.76mbps. will be a nice phone with a awesome processor.
but again back to the threat subject - will it be a problem to change the radio rom on the Kaiser ?
I'm not sure if this is still relevant, but a thread at the beginning of June suggested that new handsets with 3G chips from Qualcomm were banned from the USA while a trade dispute was being settled. Has this dispute been settled yet? If not then you guys in the USA may not be seeing your Kaisers for quite some time.
http://forum.xda-developers.com/showthread.php?t=310885
The P4550 (aka Kaiser....AKA AT&T 8925 TILT)
Is being released September 3rd only at AT&T.
AGAIN 8925 TILT WILL BE RELEASED SEPT 3rd.
I work for AT&T Wireless....this what I was told.
herg62123 said:
The P4550 (aka Kaiser....AKA AT&T 8925 TILT)
Is being released September 3rd only at AT&T.
AGAIN 8925 TILT WILL BE RELEASED SEPT 3rd.
I work for AT&T Wireless....this what I was told.
Click to expand...
Click to collapse
Not anymore. It's now been moved back to September 17th so they can get rid of some of the excess 8525's. I heard this directly from an HTC AT&T rep.

Some thing to clear about BlueAngel

I have planned to buy O2 XDA IIs from my frnd (2nd hand for sure)
Does it comes under the name, blueangel???
also please tell me pros and cons about this dmobile device
I already own O2 xda exec, typhoon and voyager
what about this one???
cud U, experienced users please guide me....am i gonna upgrade its rom to WM6 or not??
It's a great device, you won't make a mistake It has Intel PXA263 400mhz processor (This is the only thing i don't like in blueangel. It is not so fast. If you plan to play 3d games it is not very good for this. But you can easily overclock it with pocket master to 530mhz. With this frequency it handles everything without Snow Rally - there's a little lag and you can't play Playstation 1 games even if you overclock it to 590. I got 21-23fps in Tony Hawk Pro Skater with @530mhz and Frameskip - 2), 128 ram (This is great! With so much ram you don't need real close button.But there are no applications that wants more than 32 ram, so this is not a big advantage), Big screen and the best design for games(The screen is perfect. It wouldn't be bad if there was VGA screen but QVGA is not so bad either. In web browsing the qvga resolution is a big dissadvantage. You have to scrool a lot. But now there are browsers now that supports Zoom function.With it the browsing is good even on qvga device. When Opera 9.5 comes out it will rock And the design is great for games. It's like joystick when you handle it in landscape position and there are many buttons), 64mb Flash Storage(It's not much but you don't need more. There are SD Cards for that), SD/MMC expansion slot( The bad thing here is that it doesn't support SDHC, there are no drivers for that and there won't be in future ), CIF camera (It is really badd. The image quality is similar. If you try to record video it lags. I don't know why :/ It does it wven in the lowest quality), WiFi( No problems here), Bluetooth (No problems here either), IrDA( It can't be used as a remote controller because the irda range is around 3 meters)
And finally the PocketPC comes with WM2003. You can install WM6.1 but I recommend you to wait for explode's WM6.1. His roms are the best With the new windows the pocket becmoes really fast and stable. That's all, it's a great device
dark_prince said:
I have planned to buy O2 XDA IIs from my frnd (2nd hand for sure)
Click to expand...
Click to collapse
Nice choice. I recently picked up a hermes and while it is very nice, there are some things I miss from the Angel.
dark_prince said:
Does it comes under the name, blueangel???
Click to expand...
Click to collapse
I don't quite understand this question. If you are asking if it was sold under the name of Blue Angel, no. Blue Angel is the HTC internal name for the phone. It was never sold by HTC directly, but to the various cell carriers who rebadged it with their own plastics and ROM/applications.
dark_prince said:
also please tell me pros and cons about this dmobile device
Click to expand...
Click to collapse
Pros:
Good CPU speed (the keiser runs at the same speed, 400 mhz)
The CPU has been around for a while, so 3rd party apps that are designed for the CPU work well.
Good physical size on the screen
Lots of storage and program memory when the extended ROM is resized/removed.
Cons:
Since it is an older platform, any MW version after 2003 is a hack. The drivers are generally ported from other phones and there are various bugs that will probably never be fixed due to a lack of hardware drivers. Everything does work, there are just various quirks.
Radio range (bluetooth, wifi, etc) are not the best. Heck, they often tend to be down right crappy.
Unless someone is able to write and release a SDHC driver for the card slot, it will never support SDHC cards, which will limit the phone to 4 gig cards. 2 gig is the official spec for SD, but there are a few 4 gig non-SDHC cards out there.
dark_prince said:
I already own O2 xda exec, typhoon and voyager
what about this one???
Click to expand...
Click to collapse
I still like mine and plan on passing it to my wife or using it for testing and development if she doesn't want it.
dark_prince said:
cud U, experienced users please guide me....am i gonna upgrade its rom to WM6 or not??
Click to expand...
Click to collapse
I would. MW6 is a huge improvement over 2003 and 5. The latest ROM builds out there work very well, if not 99% perfectly, and are fast.
In my opinion, Hemli releasing wm6 for the angel breathed new life into the device.
Really, I wish HTC would revive the device, make an updated version of it. The form factor, while is a bit big for a phone, is great for usability as a PDA.
jdc said:
In my opinion, Hemli releasing wm6 for the angel breathed new life into the device.
Really, I wish HTC would revive the device, make an updated version of it. The form factor, while is a bit big for a phone, is great for usability as a PDA.
Click to expand...
Click to collapse
I second that! Just ditched my Hermes for my old trusty Blue Angel, which blows the pants off it! I forgot how much I loved the 3.5 inch screen!
Rookie as well with the Blue Angel
I am getting started with the Blue angel as well (O2 Xda IIs)
I like it a lot this will probably become my best buddy during my travels
I got a couple of complementary questions about it.
I intend to use it for business purposes, mainly Internet through
Wifi and GPRS, pdf and offices documents.
I saw on this forum that you advise to change from WM 2003SE to Windows Mobile 6 (the last published by Microsoft)
-My question is: This PDA is already a bit old now, is it going to work smoothly wit the very last OS, which is designed for more recent PDAs (i.e which should be more efficient).
I mainly want to use it for Internet, wich browser do you recommend ?
Internet explorer? Opera Mobile? Opera Mini? other browser?
By the way what is the difference between Opera Mobile and Opera Mini
you should go with opera mobile, as it is better suited for pda's. opera mini is suited for java based mobile phones.
jdc said:
Really, I wish HTC would revive the device, make an updated version of it. The form factor, while is a bit big for a phone, is great for usability as a PDA.
Click to expand...
Click to collapse
man i wish they would do that, or release a device with the same glorious screen but with contemporary features, all in all the blu angel is still a killer device 4 years on.
Absolutely right. I had been using the subj for 4 years in nearly extremal conditions, uprading and downgrading firmware dozen times. But, unfortunately it died as hero. Really great gadget, legend of HTC platform challenging ages.
Hi
Well with WM 6.1 it does everything I need and thats for sure I have my pick of devices and always come back to this one - and the 11i which is just about as good
I cant think of a time I have been upset with what it does or doesn't do. I intend keep one for as long as it will run....
John P

Artemis Processor

Hey all,
I have a Blue Angel at the moment, 400MHz ARM processor.
How does the orbit processor 200MHz OMAP compare? I know the pseeds are different but so is the architecture...do they work out about the same or not?
I'm thinking baout buying an Orbit but just wanted to know what performance was like on these compared to an older model such as the Blue Angel.
Thanks!
the_scotsman said:
Hey all,
I have a Blue Angel at the moment, 400MHz ARM processor.
How does the orbit processor 200MHz OMAP compare? I know the pseeds are different but so is the architecture...do they work out about the same or not?
I'm thinking baout buying an Orbit but just wanted to know what performance was like on these compared to an older model such as the Blue Angel.
Thanks!
Click to expand...
Click to collapse
Orbit 2 has a 400MHz processor
Yea I know but I didnt say orbit 2...
I wanted to know is there much different between the 2 processor I mentioned.
Not very different
I got a chance to play with HTC Tytan II and it seemed slower than artemis.
I have both a Blue Angel and Artemis, the only time you notice the difference is when you load up the Artemis with too many applications running at the same time, I think this is more to do with the available memory though.
The Artemis lacks memory whereby the Blue Angel had quite some to go at. Artemis is a great device as was the BA in its day, although I do still like the larger screen size of the BA when using it in the car.
Artemis is fine though with applications running so long as you close the applications when finished with them, install applications to the memory card to preserve the onboard memory and I doubt you would notice the difference between the BA and Artemis in use - Mike
Thanks Mike, that's the kind of comparison I was looking for!
The larger screens of the XDA pda's are ghreat but they're just a little too big and bulky now for carrying around in my pocket...looking for somehting a little smaller now...Orbit looks the goods...I dont need a slide out keyboard, I never use the one on the BA...
Artemis Processor,
Try following website and does all the specification comparison between different modles,
http://pdadb.net/index.php?m=pdacomparer
wow, great site, thanks!

HTC Diamond rom for P3300 with 3D booklet & contact on the right ?

Hi,
just tested the "anja" Diamond 1.0 rom, but it's not 100% the same,the main thing I flashed for is the 3D booklet with contacts and HTC home down, but it wasn't in it.
Can anybody make a rom (or program) with the same screens as the Diamond (3d booklet on homepage with contacts on the right see enclosure)? Also the HTC Home tabs are completely down the screen and a direct photo button,...
Thanks,
Innovator
There will be one main problem.... the artemis chip is far away from beeing fast enough for this kind of gimicks
Innovator said:
Hi,
just tested the "anja" Diamond 1.0 rom, but it's not 100% the same,the main thing I flashed for is the 3D booklet with contacts and HTC home down, but it wasn't in it.
Can anybody make a rom (or program) with the same screens as the Diamond (3d booklet on homepage with contacts on the right see enclosure)? Also the HTC Home tabs are completely down the screen and a direct photo button,...
Thanks,
Innovator
Click to expand...
Click to collapse
I think many people here working on what you ask for. And if it would be so easy then you could already have it.
Totally agree with Daiphi!!
Qualcomm® MSM7201A™ 528 MHz VS Texas Instruments OMAP850 200 MHz
I think tah cocludes it all!
No reason for and artemis rom with bling-bling 3D effects and no speed what so ever!
3D booklet
I had the Qtek 2020i (520mhz) and the Eten G500 (400MHZ) but i really don't need the fast processor. For only GSM, GPS, WIFI the OMAP 200MZ is fast enough, i have no complaints about applications that run slow, and half processor = half battery consumption. Batterystatus can pimp up your P3300 to 260mhz, but i really don't need this.
I think if someone (maybe Tom Condon could make a fast rom without too many junk, this 3D booklet would run smooth, like the 3D cube.
I think maybe in 2-3 years the P3300 can get slower, due to gps-manufacturers that make better 3D Graphics, but by then the Diamond is dropped to €300 and we have this one allready
Hope to test Igo My Way 8 soon, cause TomTom Navigator's graphics are very basic...
Cheers,
Innovator
^ I've seen Igo 8 on my friend's artemis, and it runs pretty slow on the Artemis Touch 4.02 rom. Well, actually its the same as Tomtom, but when the buildings or any 3D objects on the map come into focus, it does start struggling..
randomgoon said:
^ I've seen Igo 8 on my friend's artemis, and it runs pretty slow on the Artemis Touch 4.02 rom. Well, actually its the same as Tomtom, but when the buildings or any 3D objects on the map come into focus, it does start struggling..
Click to expand...
Click to collapse
Tried igo 8 on my orbit - it works on o2 factory rom - but some cooked roms have not enough free ram. After 3 days still 22,7 MB free RAM (screenshots are incl. s. signature)
Innovator said:
I had the Qtek 2020i (520mhz) and the Eten G500 (400MHZ) but i really don't need the fast processor. For only GSM, GPS, WIFI the OMAP 200MZ is fast enough, i have no complaints about applications that run slow, and half processor = half battery consumption. Batterystatus can pimp up your P3300 to 260mhz, but i really don't need this.
I think if someone (maybe Tom Condon could make a fast rom without too many junk, this 3D booklet would run smooth, like the 3D cube.
I think maybe in 2-3 years the P3300 can get slower, due to gps-manufacturers that make better 3D Graphics, but by then the Diamond is dropped to €300 and we have this one allready
Hope to test Igo My Way 8 soon, cause TomTom Navigator's graphics are very basic...
Cheers,
Innovator
Click to expand...
Click to collapse
iGo8 works great on this device, I have it installed myself!
I have installed IGO8 on Artemis Touch 4.02 Full no Cube ROM
runs perfect and quick (with full details)
tested also with Anja Mossi Diamond style rom - and there is low free RAM for IGO8
Tested Igo8 today with Oop Black Beta Public Rom from Tom Condon (not condom), no delays, hope to see Tom's latest rom soon with some diamond influences, and booklet maybe instead of cube???
Also installed 'A-GPS' for the first time (quickgps also on rom, but A-gps should be good for 10 days or something).
So people saying IGO8 runs slow on their P3300 --> install a faster rom!!!
Some pre-cooked roms have so much junk that everythings goes slow.
Just take a basic rom (4.02 lite with no cube for example) and install your own stuff.
It's very difficult to cook a rom with tools that everyone uses... i prefer the lite stuff
But when the 3D Diamond interfacte would be included, i would not doubt to install this rom

[Q]FPSEce (Play Station One) for WVGA on WM 6.5.3

Hello everybody!!!
I think many HD users looked for good games for their devices. There are some really nice applications like Resco Bubbles, Experiment 13 etc. Also We can run Nintendo, Sega and other old games on HTC HD(with sortware multitouch support).
However, for my device I want at least psx games...(I am final fantasy and takken fan) I found emulators such as PocketISO and FPSEce, which allowed you run games from PS1. BUT I cant install it properly(I read many articles about it before start a new thread, but still cant find solution). Furthermore, I read, that FPSEce is not support WVGA(((
On Youtube I found many videos about FPSEce 0.10 working on Samsung Omnia and running psx games with full speed. I don't think that HTC HD is less powefull in turms of CPU and RAM than Omnia(maybe I am wrong).
So, can anybody explain me how to install it and (if possible) how to make it multitouch (like Morphgear with some skins and fix)?
I am using WM 6.5.3 by T2M(28004)
Thx in advance.
I try to run fpsece many times, but always whit poor result. The site appear old and no update. However, This progr starting directly from the executable file and work in the hd wvga, but can't start games for me
the point is simple really, the resolution aint supported. omnia has a far less screen res, thus delivering better application experience/smoothness. moreover, it seems fpsece has been discontinued or at least not updated in the last, well, year, so i fear your request is d00med from the start.
crashDebug said:
the point is simple really, the resolution aint supported. omnia has a far less screen res, thus delivering better application experience/smoothness. moreover, it seems fpsece has been discontinued or at least not updated in the last, well, year, so i fear your request is d00med from the start.
Click to expand...
Click to collapse
Not really. Project is not dead!!! Check video on YouTube, it is amazing!!! Driver 2 with "touch" control and full speed. G-sensor is working, nice on-screen buttons, sylus mode etc. Now it is even better than real PS1!!!
By the way, I had chat with moderator from FPSE forum, and he said, that new version will probably released before Xmas! I hope it will fully compatible with our device.
aliff said:
Not really. Project is not dead!!! Check video on YouTube, it is amazing!!! Driver 2 with "touch" control and full speed. G-sensor is working, nice on-screen buttons, sylus mode etc. Now it is even better than real PS1!!!
By the way, I had chat with moderator from FPSE forum, and he said, that new version will probably released before Xmas! I hope it will fully compatible with our device.
Click to expand...
Click to collapse
Could you post a link to the youtube video you're refering to?
Thanx!
MAMeingast said:
Could you post a link to the youtube video you're refering to?
Thanx!
Click to expand...
Click to collapse
Check this links
http://www.youtube.com/watch?v=-MHCQiT6e54
http://www.youtube.com/watch?v=pHDwIkGuvAc
http://www.youtube.com/watch?v=YR2e1Mep2b0
I've been waiting for FPSCE all year now, and every week we've been told "It's a few weeks away". I've purposely put it out of my mind for weeks now as I can't be bothered with the continual delays (although it does seem a lot of progress has been made recently and it looks a fantastic app).
I had 0.96 running on my HD no problems, except the FPS (frames per second) was about 17 for even simple games like Ridge Racer = unplayable. However vers 1.0 promises to work a lot quicker.
There is also a thread on their forum about the Touch HD, and I think it will work and be playable if/when released. They are also working on multitouch-faking controllers, otherwise bluetooth controlllers work well.
So I'm a little ambivalent over the project, mainly because I got sick of waiting for it, but I'm ready to eat my hat if/when it is released (probably in 2011 )
smeddy said:
I've been waiting for FPSCE all year now, and every week we've been told "It's a few weeks away". I've purposely put it out of my mind for weeks now as I can't be bothered with the continual delays (although it does seem a lot of progress has been made recently and it looks a fantastic app).
I had 0.96 running on my HD no problems, except the FPS (frames per second) was about 17 for even simple games like Ridge Racer = unplayable. However vers 1.0 promises to work a lot quicker.
There is also a thread on their forum about the Touch HD, and I think it will work and be playable if/when released. They are also working on multitouch-faking controllers, otherwise bluetooth controlllers work well.
So I'm a little ambivalent over the project, mainly because I got sick of waiting for it, but I'm ready to eat my hat if/when it is released (probably in 2011 )
Click to expand...
Click to collapse
Well, I hope you are wrong about release date...
About FPS: I have tried Final Fantasy 8 and during first video it worked with 25-35 frames per second. However, I can't start the game - I can see FF boot screen, but I can't move to the main menu. I pressed all buttons("x", "start" etc.) with no result, only "select" buttons works fine. What I did wrong? I have tried other games with the same result.
aliff said:
Check this links
http://www.youtube.com/watch?v=-MHCQiT6e54
http://www.youtube.com/watch?v=pHDwIkGuvAc
http://www.youtube.com/watch?v=YR2e1Mep2b0
Click to expand...
Click to collapse
all videos on 1Ghz device doubt it will work same on 528Mhz... maybe half speed.
aliff said:
Check this links
http://www.youtube.com/watch?v=-MHCQiT6e54
http://www.youtube.com/watch?v=pHDwIkGuvAc
http://www.youtube.com/watch?v=YR2e1Mep2b0
Click to expand...
Click to collapse
bnm7bnm said:
all videos on 1Ghz device doubt it will work same on 528Mhz... maybe half speed.
Click to expand...
Click to collapse
+1
Exactly why I wanted to see the videos myself... You can't compare the TG01 with the HD! The HD doesn't even have half the Toshiba's speed!
(Even when running a SnapDragon processor at the same frequency as the HD's processor, the former is faster than the latter...)
MAMeingast said:
+1
Exactly why I wanted to see the videos myself... You can't compare the TG01 with the HD! The HD doesn't even have half the Toshiba's speed!
(Even when running a SnapDragon processor at the same frequency as the HD's processor, the former is faster than the latter...)
Click to expand...
Click to collapse
I know that TG01 in terms of speed and performance much better than our device.
I just posted this links as an example of what new version can do....
About speed:
This is DELL X50v
On this device FPSEce runs many games with 30-40 frames per second.
http://www.youtube.com/watch?v=1i4JNUaEOdE
http://www.youtube.com/watch?v=ZBSgNJlq38Q&feature=related
I don't think that X50v(processor 624 MHz Intel PXA 270, 64 RAM, VGA) is more powerfull than HD(processor 528 MHz Qualcomm MSM7201A, 288 MB RAM, WVGA)
BTW, on this video it seems to be an old version of FPSEce, however authors said that new version will run games much faster and smoother.....
aliff said:
I know that TG01 in terms of speed and performance much better than our device.
I just posted this links as an example of what new version can do....
About speed:
This is DELL X50v
On this device FPSEce runs many games with 30-40 frames per second.
http://www.youtube.com/watch?v=1i4JNUaEOdE
http://www.youtube.com/watch?v=ZBSgNJlq38Q&feature=related
I don't think that X50v(processor 624 MHz Intel PXA 270, 64 RAM, VGA) is more powerfull than HD(processor 528 MHz Qualcomm MSM7201A, 288 MB RAM, WVGA)
BTW, on this video it seems to be an old version of FPSEce, however authors said that new version will run games much faster and smoother.....
Click to expand...
Click to collapse
Don't know, if CPU is everything... I know the Axim has a very powerful 2700G graphic chip the HD doesn't! (I owned a Axim before my HD...
this will be fantastic. i can't wait to try crash band on my Topaz
Hi maxcy,
I just installed Max Manila Ultimate 2.6 Beta and can confirm that it works perfectly with latest NRG ROMs. Once again you did an awesome job. I finally have my 16 shortcuts and bg4all back + a working action softkey. Thank you so much.
ps1 for wvga
hi guys i think fpsece looks really good im tired of the low quality mobile games they keep bringing out and this looks like it will be decent. just need to find out how to get all my favourite ps1 games on my storage card. i read on the oficial forum that the developer is thinking about charging £5 for the emulator when its available on wvga devices. well im sure he/ shes done alot of work and i for one think thats fair. i think it will be free if you dont want to save your game or something like that. just cant wait.
Hey GUYS!
FPSEce is released!!!!!!!!!!!!!!
http://www.fpsece.net/downloads.htm
the software still hasn't support 6.5.3 yet, has it?
W.C. said:
the software still hasn't support 6.5.3 yet, has it?
Click to expand...
Click to collapse
This software support WM 6.5.3, at least some ROMs. For example, it works on Flashmore's and XennyTech's ROMs.
where can we find some games?
hello00 said:
where can we find some games?
Click to expand...
Click to collapse
google is your friend! can't really say, where you can find it.

Categories

Resources