hi, yesterday i was messing with regestry files (HKEY_LOCAL_MACHINE/snd) in my i-mate PDA2K and after a soft reset i lost most of the notification sounds like pressing the start button and ect ...
anyhow, can anyone just attach the folder snd.reg wich is located in HKEY_LOCAL_MACHINE ,noting that i'm using windows mobile 2003 second edition.
any help!!! ...
Related
Hi, I'm a new user of Jasjar. It is also my first Windows Mobile device.
I have two questions:
1) Why my JasJar is so slow? I mean I made an Hard reset this morning, but nothing change. I think that a device like that can't need 20 second for turn the screen on, and another 8/9 seconds for change from Landscape mode to vertical mode.
I have installed only the resco today plug in and the resco registry, for tchange the layout of the qwertz keyboard.
2) Any news for the italian rom upgrade? I see that in the ftp section there is a file named ROMITA-TIM. how to instal it? is safe to instal it?
Many Thanks
9090 Rom 1.40.00 WWE ExtRom 1.40.150 radio 1.13.00.
I had an accidental Hard reset when i had meant only to do a soft reset.
I had the 9090 working perfectly for years and have lost the programs that I updated it with.
I have found LED Off and GB-SOFT tweak for the GPRS but have lost all the others including the Contacts Button from my phone pad.
Can someone send me in the right direction for the cab file to replace the contact button and a link to any other software we used in the old days.
Also I still remove the BT file unless using TomTom with a BT GPS so I dont get the "Dont hear the other side" prob when using it as a phone.
Was this ever fixed?
Thanks for the help
Steve
Found it, it's called Mamaich Telephone Extension and it adds a Contact button to the blank button on the phone keypad.
Only prob is it wont install because it says I have an unregistered version of NaturalInstaller. File is called SetupFL.exe .
Any idea's? Mamaich website wont load.
Prob solved
Managed to unpack the CprogHook.WM2003_2577.CAB file from the installer packaging and now have my Contacts button back on the phone pad.
CprogHook.WM2003_2577.CAB
Hi,
could u email me the CprogHook.WM2003_2577.CAB ?
[email protected]
thks a lot
I just bought a o2 xda 2s on ebay.
I was wanting a pocket pc phone that i could hook up to a serial port device I use at work.
The phone works great so far but when i installed the program i use at work everytime i try to load a file it freeze's while trying to load file. I have used this program on HP pda's with not 1 issue. Just wanted to have a all in 1 handheld unit.
Currently this is what I have:
Model: ph20b Pocket PC
wm2003se
version 4.21.1088 (build 15045.2.6.0)
rom version 1.40.00 WWE
rom date 3/10/05
radio version 1.12.00
protocol version 1337.42
ext. rom version 1.40.242 WWE
What would make it freeze like it does, only with this program, and can i upgrade to wm5 (how?). Are there any other upgrades you know would make it more stable a fix the freezing issue?
This is the first pocket pc phone i have had so i have no idea as to what,where and how to start fixing.
Thanks for any help you guys may provide!!!!
For WM5 look here http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home my signature shows what Rom I use. I find it good. I don't what could be causing the freezing. What is the program?
Here is a link to software im using.
http://www.racetech.com/SubMenu.asp?cMenu=11&c=Yes&cSubMenu=92&showPage=da
I have read the info on ba wm5 rom and still dont know how to install. i use a pc to check email and thats it, so im a little new to this stuff.
Can someone help step-by-step me through this a little
do i need a sd card as i don't have one. to update to wm5
The phone is new and i dont' have any data on it that i need.
Thanks Guys
I have downloaded the following file on my PC Desktop.
Helmi_wm2k5_aku3.2_32mb (rar file)
I extrexcted it in its own new file and now have the following files.
1)extrom
2)AddOn
3)ph20b
4)ph20b1
5)wm2k5_aku3.2_32mb_v1.3.2
6)Helmi_aku3.2_v1.3.2.txt
what next?
Yes you would need a SD card you can get a 1gb really cheap on ebay and then you can store programs etc on it.
Well I must confess I haven't done it I bought mine of ebay with WM5 on it already. The fellow I bought mine off will upgrade other units for $150 AUS I think. If you aren't in Aus he still would proberly do it.
i got wm5 in an exe file from www.buzzdev.net i think and all i had to do was put my xda 2s in boot loader mode stick it in its cradle and run the file easy peasy
you DO - NOT need an SD card (i did it , i dont have one)
here is the guide to install
http://wiki.xda-developers.com/index.php?pagename=Helmi
i DID NOT DO THE OPTIONAL INTERNAL MEMORY BIT
Copy the nk.nbf file to folder that match ur device (PH20B/PH20B1)
* Determine your operator Information e.g.: "T-MOB101", or "Vodafone", or O2. See GetDeviceData.
* Open a command prompt, (open "run", type cmd , press enter), go to the folder where the ROM(nk.nbf) file resides (mine is c C:\Documents and Settings\Administrator\Desktop\pda\oprade\Helmi\PH20B - notice the c is the command) and execute: SetOperator ??? (where ??? is your operator , mine was SetOperator ORANG001)
# Put your device into Bootloader mode by pressing and hold the "Power" & "Record" buttons, and then press the Reset Button
# Connect the phone to the sync cable/cradle.
# Now you can upgrade the ROM using BaUpgradeUt.exe(i used this one) / MaUpgradeUt_noID.exe
#
When the upgrade is completed, you must perform a Hard Reset
1.
Press and hold the "Power" button, and then press the Reset Button. Colored stripes (the bootscreen) will appear on the screen.
*
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc, EITHER:
o Quickly press "Record" & "Camera" before the versions appear at bottom right
o OR press "Power" & "Camera" & "Record" buttons and Reset at the same time
*
If you have a PH20B1 device such as SX66:
o Quickly press "Record" & "Windows Media" before the versions appear at bottom right EITHER
o OR press "Power" & "Windows Media" & "Record" buttons and Reset at the same time
2.
You'll see three options on screen. You must change the second and the third to yes. If you are not developing/testing software you can disable the first debug option for better performance.
* If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc, use "Camera" and the "Record" buttons.
* If you have a PH20B1 device such as SX66, use "Windows Media" and the "Record" buttons.
3. Press the "Mail" button. A white screen will show for a while, while it is clearing your device in preparation for the new ROM to start executing
4. When the bootscreen, aka. the colored stripes is displayed, wait more, you are booting. The welcome screen to set up your device will appear shortly ...
once done copy what you need (i installed all the fixes etc) from the extrom folder to your ppc and run them to install them (once done delete the cabs)
*note doing this way you will need to setup your gprs and mms settings for your network*
Ok I'm going crazy. Where in the heck do I find setoperator.bat??
Thanks
to all o2 zinc lovers
if you tried to change your device language and faced the crosse language message
or if you lost your rom and your dead device still in eboot page i will save you
both of them hapend to me and i tried and at last success ...
ok do just as i gona tell you
changing language
its too simple
0) plug your zinc via usb activesync v4.5 to desktop...
1) just make a text file in your desktop and name it DeviceSpy and set it attribute to read only
****if you got word in your device you have to use any dos console software and rename it to devicespy.exe with readonly attribute....*****
2) transfer it to \windows dir in your....
3) change the suffix from .txt to .exe by resco explorer or any other file explorer now you have DeviceSpy.exe
check it attribute and sure its readonly...
4) run any zinc upgrade software you wish and got it...just watch the text!you fill happy
notice sometimes some component of wm6 will be not install completely but dont worry .try agine or other version.
************************************************************************************************
************************************************************************************************
if your rom crashed and your devise still in eboot page and waiting for downloading disk image now you gona give it
but a little problem....you need another of any kind ppc that just activesync can recognize it..any wm or hd .....
and also you need ollydbg software.its a debuger.....
steps
0) run ollydbg and load the rom upgrade file in ollydbg
1) plug the healthy ppc to your desktop via usb activesync v4.5
2) make a text file in your desktop and name it DeviceSpy and set it attribte to read only
2) transfer it to \windows dir in healthy ppc...
4) change the suffix from .txt to .exe by resco explorer or any other file explorer now you have DeviceSpy.exe
check it attribute and be sure its readonly...
5) press f9 and zinc upgrader will run...it suppose to installer ignore the differ
6) tap all ok or next buttons and in dialogbox with update button beware
7) most important section : tap update button and eminently click on ollydbg title bar to make it active window
and watch the activesync icone .it quickly will chang and make activesynk disconnect and you have to hear
a notification tone and ppc will restart...
8) quickly press f12 to break ollydbg process then unplug healthy ppc and plug your zinc and wait for notification tone
9) press f9 and enjoy the new rom....
that healthy ppc is still healthy but your dead zinc now is alive...
if you have word or etc you have to use any dos console software and rename it to devicespy.exe with readonly attribute....
Hi Mazi_v. It's really thank you for your great help to change my Zinc from Chinese Rom to English Rom. You're very great!!!
your welcome friend
Hello mazi_v
I am trying to reinstall the ROM file on my bricked PPC.
My PPC does not restart after step (7), it just give an error message that the update cannot continue and the program terminates after I click the "ok" button on the error dialog box.
I have a bricked XDA Zinc and the second PPC I have is a working XDA IIi.
Please advice me if there is a possiblity way I can continue with the ROM update.
Thanks
give a hard reset to mini
it may hlpe
give a hard reset to mini
it may help
dont use olydb
just wen your healthy ppc restarted replace it with zinc quickly.
anyway to fix this problem?? my zinc same
i follow this method step by step,but my zinc is stuck at Reset Hermon...
i tried this method with wm5 n wm6 but still stuck at Reset Hermon
what should i do?
please help me...
Hi there, my Orange SPV M2000 totally messed up!
I got it for my birthday and it came with Windows Mobile 2003 SE, but i wanted it "up to date" so i installed Windows Wobile 6.5 Professional.
And it worked!
I installed a few addons like MSN, Facebook, Twitter and another addons.
But then it doesnt react anymore.
I only can see the startscreen (where you can scroll up and down to go to messages, emails, time or other things), but i cant open the start menu - even the start menu button doesnt work!
I reinstalled Windows Mobile 6.5 and 6.1 several times, but it still doesnt change.
And when i wipe of the hole pda, and reinstall windows mobile, it still starts with my own wallpaper, so it means that it doesnt erase everything.
So do someone know how to erase the WHOLE pda, and install everything new, or is there another way to solve the problem?
Regards,
Fabian
well, you are probabl doing it wrong then. a hard reset is done by pressing
reset+power+record+camera
and in the menu that comes up you disable KITL and enable the clear registry hive and format storage option
like described here: http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_HardReset