internet through active sync 4.2 usb - MDA III, XDA III, PDA2k, 9090 General

first things first, yes i've looked through the forums and i havent found any answer, par the activesync>connection settings>this comp connected to = internet.
i already have that, i have all firewalls allowing the connection, etc so its not the firewalls or that setting above.
i'm using my B.A with wm2005 (the helmi one with the 16m pagefile)
i open my pocket explorer and type in www.google.com while synced to my computer using activesync through the usb.
i get the following message
"The page you are looking for cannot be found due to unknown error
0x80072f78"
i've tried other websites and get the same response.
i have a feeling i can fix it in control panel>network settings
but i have no idea how.
all help = much appreciated =D
also big thanx to all who worked on the wm5 rom it PWNZ!!

actually...activesync4.2 is not able to supply net to your BA through usb anyhow...but U should use 4.1 instead...

i shud aye. thanks for the info man definately going to 4.1 lol i just got my b.a recently so i have no idea about older versions of a.sync.
all i know is 4.2 sux xD.
thanx lol

Related

No way to connect my pda2k with my mac over Bluetooth

excuse me to bother you guys but i'm getting crazy to establish a bt connection on my mac...Does anybody know why Mac and the rest of the world could'nt work easyly? I'd like to use it like sms sender from the computer and others simple things... but when I try to do it the answer is:"The requested service is not running on this device..please enabled on the device or select another one to continue..." I'm sure that I'm doing some mistake but...what's..?? Thanks for your help
1.22.00.WWE
10/22/04
1.06.00
1137.38
1.22.162.WWE
You using a Mac too!
Do you know how to setup the Blue Angel/Harrier up as a bluetooth modem for Mac?
Because I am having troubles with that.
Mac is being a pain in the ass right now. I can sync the two though.
http://www.markspace.com/missingsync_pocketpc.php
http://www.pocketmac.com/products/pmpro3/pmpro3.html
Both of thses tools allow BT connection between Mac and PocketPC.
... unfortunately...pocket mac put something in to the sys that uses the 80% of the cpu doing nothing...i really didn't understand why... the missing sync is fine and i'm using it but my trouble was to use my pda2k as a modem on mac...that's the real pain in the ass !!does anybody know if there's something like a bible to follow with procedures to do it?
Thanks a lot
Mik

?? With newROM ActiveSync never wants to make partnRships ??

Anybody could help me?
I tried everything.
Install and uninstall ActiveSync.
HardReset, Reset....
With the new i-Mate ROM my laptop doesn't want to connect my PPC.
It starts to connect, and it seems almost ok (I can surf between the folders of my PDA, but when I click StorageCard or ExtendedRom folders it starts thinking forever), but it just tries, never connects, never gives me a chance to make a partnership.
Does anybody know what is this problem?
THX,
Tuning
One more thing:
With the same settings on PC but with an older ROM everything is fine.
Help!!!
My girlfriend has a XDA2i which has no problem syncing to the same PC. I get the same message you get " retrieving settings" which hangs for ever until I disconnect.
Another interesting thing in my discussion with myself:
Through IrDA everything works fine!!!!!
Why is that???,
Why it doesn't connect to my pda through USB???
H E L P ! ! !
Problem Solved.
Thanks to me.
Sygate Personal Firewall Pro is guilty.
(Although I setup everything what Microsoft wrote)
It seemed ok, but the problem dissapeard just when I uninstalled the application.
I'm getting crazy...
Microsoft Feardows
Sounds to me like you diidn't have all the ports you needed open, if you happen to recall what ports you had open, and post them perhaps I could spot what you missed.
Can't really say I know anything about your firewall.
dah54 said:
Sounds to me like you diidn't have all the ports you needed open, if you happen to recall what ports you had open, and post them perhaps I could spot what you missed.
Can't really say I know anything about your firewall.
Click to expand...
Click to collapse
You may have right, but I opened ports which Microsoft said.
Do you know which ports are these?
The interesting is if you are right, why did work my other Jasjar or with another ROM??? Another ROM uses anorther PORTS???????
what was the resolution to this? I have exactly the same problem having just installed the ROM upgrade. What ports do you have enabled?

WM6 and Linux - Bluetooth issue

I am trying to get my laptop running linux to use my hermes as a modem over bluetooth. So far I am not succeeding, I have paired the phone and the laptop, but no services show up to share. I have sent files over bluetooth to the laptop and that is just fine.
Has anyone else done this? I really don't want to change my laptop back to windows just so I can surf the net using my phone.
Thanks
What distribution of linux and what window manager do you use?
And does the file transfer work both ways? (to the phone and from it).
I might help you a little
Using Ubuntu - Edgy Eft and Gnome.
I don't have a way for files to be sent from the latop, I am using the blue tooth file sharing program - which seems to be one way only.
I did this a long time ago, so I might have forgot something, but let's give it a try.
First check if you have a rfcomm device in /dev/, there should be something like rfcomm0.
And this is there if you have edited and paired your phone correctly!
(you should add your device to /etc/bluetooth/rfcomm.conf)
Try Gnome-PPP, it's a very good program for dialup rutines ^^
Code:
sudo apt-get install gnome-ppp
The gnome-ppp should be run in root mode because rfcomm device has no privileges, or then you could just chmod it.
But anyways, I've made a script for myself to turn on BT and start gnome-ppp, to run it with root privileges with the following command
Code:
gksudo -u root gnome-ppp
after that you see a window with username password etc.
press setup and put in the following config..
Setup
Now we need a init string! I have no idea what is your provider and what init string is needed for it.
In the Setup window press Init Strings...
And in the first place you set the string.
With Saunalahti as a provider I have a init string of:
AT+CGDCONT=1,"IP","internet.saunalahti"
notice that internet.saunalahti is the APN name for my providers internet gprs connections! So replace this with yours, or then contact your provider and ask for that info
Now back to the first window.
My ISP doesn't require any username but you can't connect without them so put in whatever you like for example
username: none and password: none
or
if you need username and password for your providers GPRS, then add them here
For the phonenumber set the number: *99#
Nothing else, that should be it then if I got it all and remember correct
Then just connect (notice that on TyTN there isn't any "connecting to GPRS" popups when you use a PPP from linux).
in WM6, the phone internet sharing no longer behaves like a modem. not sure how to get it working with Linux
joej said:
in WM6, the phone internet sharing no longer behaves like a modem. not sure how to get it working with Linux
Click to expand...
Click to collapse
what do you mean, the "Wireless Modem" program that you can find in the Programs folder?
I never used that, there's no need of it.
In fact, don't use it, propably wont work with it.
StewartG said:
I am trying to get my laptop running linux to use my hermes as a modem over bluetooth. So far I am not succeeding, I have paired the phone and the laptop, but no services show up to share. I have sent files over bluetooth to the laptop and that is just fine.
Has anyone else done this? I really don't want to change my laptop back to windows just so I can surf the net using my phone.
Click to expand...
Click to collapse
I've been successfully using my Wizard and Hermes as BT modems for GPRS/EDGE/UMTS connections, but only with WM5 (check out my tutorial here: http://klamstwo.org/evad/archives/20 ). After upgrading Hermes to WM6 I am no longer able to create rfcomm device, and I don't know why.
However, it is still possible to use GPRS/UMTS connection under Linux! I've managed to get it working through Bluetooth PAN profile. I'm planning to write some kind of tutorial on my blog pretty soon, but in meanwhile have a look here: http://bluez.sourceforge.net/contrib/HOWTO-PAN - this HOWTO describes quite comprehensively BT PAN usage under Linux.
Basically, you need to set up Internet Sharing via BT on your Hermes, and then connect from your Linux using pand daemon. Check out HOWTO, give it a try, if nothings comes up - feel free to ask here. Good luck.
Btw, my distro is FC6.
gvoima said:
what do you mean, the "Wireless Modem" program that you can find in the Programs folder?
I never used that, there's no need of it.
In fact, don't use it, propably wont work with it.
Click to expand...
Click to collapse
In WM5 it didn't work even with Windows (or I didn't know how to set it up properly). WM6 brings completely new Internet Sharing application which is accessible from Linux without big problems via Bluetooth PAN profile - check out my post above.
I'm planning to try connecting to internet through Hermes/WM6 via USB cable. I guess it's just a matter of installing some usb-driver. It's worth to try, as UMTS/HSDPA connection together with BT drains battery really (I mean REALLY) fast, and also - USB cable offers higher speeds than BT...
Nice to know, i'm using WM5 atm, waiting the official WM6 release from sweden (I live in finland and tried to contact finnish HTC regarding that matter), then I might look into it more.
eva_d said:
I've been successfully using my Wizard and Hermes as BT modems for GPRS/EDGE/UMTS connections, but only with WM5 (check out my tutorial here: http://klamstwo.org/evad/archives/20 ). After upgrading Hermes to WM6 I am no longer able to create rfcomm device, and I don't know why.
However, it is still possible to use GPRS/UMTS connection under Linux! I've managed to get it working through Bluetooth PAN profile. I'm planning to write some kind of tutorial on my blog pretty soon, but in meanwhile have a look here: http://bluez.sourceforge.net/contrib/HOWTO-PAN - this HOWTO describes quite comprehensively BT PAN usage under Linux.
Basically, you need to set up Internet Sharing via BT on your Hermes, and then connect from your Linux using pand daemon. Check out HOWTO, give it a try, if nothings comes up - feel free to ask here. Good luck.
Btw, my distro is FC6.
Click to expand...
Click to collapse
I see your point now, I upgraded to a new ROM and AKU, now the wireless modem is gone and I cannot connect to a rfcomm device anymore. But there is the Internet Sharing application, I'm going to try your tutorial in a moment
What about USB modem?
eva_d said:
[...]I'm planning to try connecting to internet through Hermes/WM6 via USB cable. I guess it's just a matter of installing some usb-driver. It's worth to try, as UMTS/HSDPA connection together with BT drains battery really (I mean REALLY) fast, and also - USB cable offers higher speeds than BT...
Click to expand...
Click to collapse
Hi all,
It's my first post on this forum. But I'm looking forward to finding a way to use my HTC Wizard has a USB modem...
I've seen on another forum that configuring this device as an USB modem can be quite easy done on Windows. So it would be nice to have this working for Linux
joej said:
in WM6, the phone internet sharing no longer behaves like a modem. not sure how to get it working with Linux
Click to expand...
Click to collapse
You can get it working as modem the same way you could do it in WM5 - using the "internet sharing " application.
The problem described here is that when you do
$ sdptool browse <bluetooth_mac_address>
you see no services.
I have the same problem with ubuntu.
When I browse the services of another phone - a nokia for example - I see all of them .
However I had this problem with ubuntu even before upgrading to WM6.
So it seems the problem is in the bluez version delivered with ubuntu.
What I am going to try the next few days is to uninstall the ubuntu release of bluez and build the source code and install.
I had an issue with synce also with ubuntu - not working. So I downloaded synce 's sources and everything works now.
deyanmf said:
You can get it working as modem the same way you could do it in WM5 - using the "internet sharing " application.
The problem described here is that when you do
$ sdptool browse <bluetooth_mac_address>
you see no services.
I have the same problem with ubuntu.
When I browse the services of another phone - a nokia for example - I see all of them .
However I had this problem with ubuntu even before upgrading to WM6.
So it seems the problem is in the bluez version delivered with ubuntu.
What I am going to try the next few days is to uninstall the ubuntu release of bluez and build the source code and install.
I had an issue with synce also with ubuntu - not working. So I downloaded synce 's sources and everything works now.
Click to expand...
Click to collapse
This is mainly because the connection method has changed in WM6.
In WM5 it was done via DUN (Dialup Networking Profile). WM6 Internet Connection Sharing does not utilise or advertise this profile when in place, but sets up a PUNU (Personal Area Network) profile, basically turning the Hermes into a router with dhcp services.
I followed the referenced howto and was able to get my laptop running FC6 connected to the Hermes and auto-assigning an IP address. Unfortunately, though, the connection was not stable and disconnects not long after it was established.
I'll have another read at the howto as I've noticed persistent connection flags that should force reconnection, however if I'm connected to the Company VPN, then I suspect that will continually drop also.
Can anyone post any success stories and configuration/command output that they used to create a stable connection?
Ta
Darren
numanoids said:
Can anyone post any success stories and configuration/command output that they used to create a stable connection?
Click to expand...
Click to collapse
Check out my solution: http://klamstwo.org/evad/archives/40
It actually works stable, however I have never used single connection for more than like 30-60 minutes, yet - I guess.
Btw, works also with Fedora 7.

Internet Sharing and Vista

Hello, been using custel 2.5 for a while now, probably the day after it came out. Now I need to use internet sharing adn I`m not able to do it thru BT. When I pair my device I can do activesync just fine, but on Vistas BT manager (BT Devices) its not showing the dial-up device. This is strange it works fine with the USB connection, but I really need the BT. Please help. Thanks in advance.
BTW it used to work with wizard with WM6. Thanks
its not a dail up service to start off with its a PAN. second what BT stack are you using? I had the broadcomm stack first and that wouldnt work so i had to switch to the native MS stack and its works fine. If you know how to edit the bt.inf file on your vista machine that will install the MS stack instead of the other stack.
austinsnyc said:
its not a dail up service to start off with its a PAN. second what BT stack are you using? I had the broadcomm stack first and that wouldnt work so i had to switch to the native MS stack and its works fine. If you know how to edit the bt.inf file on your vista machine that will install the MS stack instead of the other stack.
Click to expand...
Click to collapse
Doesnt it show up in the dial-up services in vista bt device manager ? so i guess Im doint it wrong ? Is there a tutorial that I can see. I remmber on the wizard WM6 it just showed up as a dial-up device and I just dial it. How do I do it here ? Maybe I dont even have to edit anything, maybe Im just having a senior moment thx for the reply
believe it or not if you use your handheld's help program and search for internet sharing it will give you instructions on how to set it up. and no it does not show up on vista as a dail up network since it is not also search this forum for Bluetooth PAN and there is lots of info
doh I never even looked at help on the phone thanks I see how to do it now I see that on the wizard they used the old wm5 modemlink or whatever its called. thanks again but plz try to be nicer to ppl next time
yozh said:
doh I never even looked at help on the phone thanks I see how to do it now I see that on the wizard they used the old wm5 modemlink or whatever its called. thanks again but plz try to be nicer to ppl next time
Click to expand...
Click to collapse
I was being nice!! You should see me being mean!
hehe ok thanks for the tip I can't wait to get home and play
Its much better than WM5 i must say once you figure it out its so easy to use just click internet sharing and connect connect to your pc and your done its so easy
Yeah got it working, works ok kinda slow, I get about 322k on dslreports.com/mspeed while on the phone I get around 800k on the phone it self and about 800 using the USB cable. Any suggestion on how to speed it up ?
yozh said:
Yeah got it working, works ok kinda slow, I get about 322k on dslreports.com/mspeed while on the phone I get around 800k on the phone it self and about 800 using the USB cable. Any suggestion on how to speed it up ?
Click to expand...
Click to collapse
I noticed the speed decrease over PAN compared to the USB cable as well. I get way more fluctuations over BT. I am sticking to the USB but it is a nice fallback. Also, for me, Internet Sharing is a night and day difference over dial-up networking/modem driver. It is so easy. This feature is a WM6 gem!
yozh said:
Yeah got it working, works ok kinda slow, I get about 322k on dslreports.com/mspeed while on the phone I get around 800k on the phone it self and about 800 using the USB cable. Any suggestion on how to speed it up ?
Click to expand...
Click to collapse
Bluetooth is severely limited in Terms of speed, especially if you're not using Bluetooth 2.0 + EDR
gridpool said:
I noticed the speed decrease over PAN compared to the USB cable as well. I get way more fluctuations over BT. I am sticking to the USB but it is a nice fallback. Also, for me, Internet Sharing is a night and day difference over dial-up networking/modem driver. It is so easy. This feature is a WM6 gem!
Click to expand...
Click to collapse
Yeah just wish I didnt loose 500k over bluetooth
anyone else stuck with vista showing unknown device in device manager when usb tethering with internet sharing on mine it seems to work for 5 mins then disconnect and give up reverting back to unknown device. so im stuck with bluetooth
vista 64 bit
Hey Guys!
My first post with such a stupid problem:
i'm trying to connect to internet with vista 64bit using my hermes over usb. but it doesnt seem to work.
Until last week i had win xp sp3 on my pc and the internet sharing option in hermes worked without any problems. Now with Vista Ultimate 64 bit i can connect the phone to pc, sync works perfect.
when i start internet sharing, phone builds up a GPRS connection but after 2-3 sec it disconnects the data connection and active sync authentication starts with vista.
In vista i cant find any modem connection in network settings. The only thing i found was in device manager when phone is connected to pc (HTC USB Modem)
here is my spec :
- windows vista ultimate 64bit
- mobile device center 6.1
- Framework etc. is installed
my Hermes:
- HTC_HERMES_S64_WM_6.1_TouchFlo2D_UC_V3_WWE_02.10.2008
- SPL 2.10 olipro
- radio ver 1.54.30.10
i have re-installed the drivers and device center several times without success.
What the hell i forgot or what i'm doing wrong...
Are there any tools or drivers i should use?
My friend has a vista 32 bit system. with his pc its no prob...some rndis drivers installed itself and we began to surf.
But in my vista 64, i missed this rndis driver installation......
Please can someone help me, i'm so confused...
Try checking your firewall... maybe disable it to test and see if it works temporarily.
Alright, thank you i'll try it on monday when i'm in office...
Ive no i-net there so i must be prepared, so are there any specific drivers or something i need to download? Or is device center enough?
Close Firewall doesnt really work...
Yesterday, i had a connection for one time...
In Device Manager, there was a "Remote ndis based Internet sharing device"
and internet worked...Today nothing works...
What have I to do in Vista? Should I deactivate some processes like wcescomm.exe? When I do this, It automatically restarts when Internet Sharing connection breaks down.
Could someone explain step by step how to get Internet Sharing work (Steps, Tools, Programs, Drivers)?!?
Thanks guys!
Same Problem
I am having the same exact problem.....
I HAD windows xp sp2 and everything worked fine once activesync was installed.....
I HAVE windows vista 64 bit and the device under the device manages show that its not working... it instals the RNDIS (whatever) drivers but dose not work...
I TRYed windows vista 32 bit, everything works fine..... the device conects with no problems...
SO the problem is that its VISTA 64bit so what would be causing this ???
btw my phone is a WM6 8525 from ATT with Internet Sharing
I need the internet sharing option when im at HomeHome and not at school, so im thinking about taking my laptop back to office depot!
So glad im not alone...
In meantime, in arranged with the prob... I think no one knows a solution...

internet connection sharing with wi-fi 802.11b/g

hi all,
this is my first post so sorry if i have placed it in the wrong section!
this is also my first personal windows phone, but i have had work phones that were very slow (and didnt work 100% of the time, but came in handy!)
just want to say that i think the 528mhz cpu must help greatly compared to the 200mhz phone i had before, and then the 400mhz was better still.
anyway,
i have windows connection sharing, and sometimes i need to use it via the laptop, which is ok albeit a little slow. not that much a problem really,
however since the diamond has a wireless nic, is there a way to get the laptop to use the wireless nic via usb to the diamond?
ive had a look around, and i cannot see how it could be done.
thanks for your time!
:
Hello
There is software available for what you need, there are links to it in this forum so go and search for WMwifirouter
thanks, im still searching - now i have a name i should be able to find it

Categories

Resources