MDA Dead..?!!! - Upgrading, Modifying and Unlocking

HELP..!!
I bought an MDA Vario on ebay. I tried to unlock it using the lokiwiz tool. I dont have the USB cable, but I did manage to activesync to the phone using IR. I also read that someone managed to unlock over IR.
I ran the Enablerapi.cab file in the phone, which went ok. After I ran lokiwiz.bat, I got the options screen where I entered "U" for unlock.
a little while later, my phone powered off. But it never powered on again. I tried hard resets, soft resets, removed the battery, removed the charger, everything. And it has no sign of life whatsoever.
I called TMobile and they said that since I wasnt a customer they cant help me (I'm from out of town).
Please can anyone help me. I saved up for a lot of time to buy this phone, and am devastated that its dead less than 4 hours after I bought it.

Update.
When I removed the charger from the wall and replugged it in, the red light came on on the phone. But thats it. Battery doesnt seem to charge, soft/hard resets dont work, and it does look (save for the red light) like it wont do anything
------------------------------------
Ok, reading through some of the posts I think I can rest a little easier. People say it usually gets back to normal (I need to leave it plugged in)
Two questions now.
1) Whats a normal charge time for the MDA..?
2) When the battery is totally flat (or even removed) is it normal for soft/hard resets/bootloader to not work even though its plugged into the wall socket..?

Well no one replied, I am however posting this here in the case that it may help someone else.
It was the charger. Rated at 800 mAh, it just couldnt charge the battery. I bought a charger from RadioShack which fits the phone, rated at 1.5A. In less than a second it was charging the phone, and now my phone is perfect again.
Good luck..!!

Related

[Q] Battery not charging (out-of-the-box)

Hi all!
I just got my new Defy earlier today from amazon.co.uk and I've got a question regarding the phone, sorry if I've asked something that has already been answered (didn't find a answer through the search).
The defy just simply doesn't seem to charge, when I use a USB-cable from the computer nothing happens at all. So I try a USB-charger which is connected to the wall and then via a micro USB-cable to the handset. This makes the phone go into a "charging-mode" showing a big battery with a flash on it. The percentage of battery quickly rises from 0% to 60% (in about 30 sec) and then stays there. Now I've tried to charge it for ~3h but if I then start the phone and enter the pin-code and then chose my prefered language for doing the initial setup it shuts down.
The phone then starts to load and does the same procedure of jumping from 0% of battery to 60%. The green "liquid" in the battery during "charging mode" is moving which in my mind should indicate that the phone is charging, but it doesn't seem to work.
If I unplug the charger the phone dies instantly.
When I plug the charger in the phone a small white led flashes quickly and then it's black again.
Should I just let it charge for like 10+ hours and hope for the best? Or are there any other possible solutions out there?
Just to clarify, I haven't rooted it or whatever, I haven't managed to get it to start even once.
/crushez
I think you have used accessories other than Motorola. Usually this happened to me when I used apple charger converter with a motorola cable.
If that is not true, its better to return the product since amazon has a 100% cash back replacement warranty. They can also send you a brand new phone later.
Ye, the charger I am using is a Sony Ericsson micro USB charger with the motorola cable. I'm situated in sweden, so the contact (english) from motorola doesn't work here.
Could it really be that since the usb-chargers shouldn't really vary that much? I checked it and the output from the chargers (the one to the wall) are the same apart from the sony ericsson's has 0.1 less V (DC).
I guess I could try and hit the stores tomorrow and buy a socket adaptor so I could use the charger motorola intended for usage in england.
As a last alternative plug your cable to a pc and leave it for 1hr. If it charges, then phone will power up on its own. Use cable that came in box with phone.
Sent from my MB525 using XDA App
major letdown this morning.
I had the phone be charged over the night and it all looked neat this morning with the battery indicator saying a 100%. THough when I unplug the phone from the charger it shuts down and wont start again. It starts charging from 0% again if I reconnect the charger.
Now I've got two possible explanations.
Either I've received a faulty battery or I'm just plained stupid and have missed something when puting the phone together, theres some kind of plastic protection on the battery which I'm supposed to remove before inserting it?
If the latter I'll go hide somewhere, cause I can't see any atm.
You can charge the phone on USB through the computer only after you've installed the driver package from Motorola on your computer. I noticed that too.
I bought a T-mobile phone on eBay, unlocked it, and just downloaded the software package from Motorola's US website. If you can't find it, let me know and I'll dig up the link!
I've installed the motorola media link and the drivers from
http : //www .motorola. com/Support/US-EN/Support-Homepage/Software_and_Drivers/USB-and-PC-Charging-Drivers
But the phone just wont react when trying to charge it, other then a small light flash up in the left corner.
I've emailed both amazon and motorola support, awaiting further instructions from them on how to proceed before I try anything else. Of course this happens on a weekend when the support is out partying -.-
Thanks for all the help btw.
I guess I'm looking forward to a month (atleast) of sending phones back and forth.
I know this is all basic stuff you've probably already tried:
1) The correct wall charger (not sure if this is an enhanced micro usb, but some manufacturers wire them differently).
2) Pull the battery and let the phone sit a bit.
3) Using the correct usb cable to computer, experiment with different usb ports on the computer (this alone saved my wife the trouble of taking her phone back). Make sure you're plugged directly, not through a hub.
4) Does the phone actually run normally while on power (plugged in)? Not sure, but can you do a factory reset on this phone with it plugged in?
5) Have you tried charging on airplane mode?
Same happened to me.
I charge the phone about 20 hours, both by wall charger and USB, and couldn't charge it up to 100% only 70%. (motorola charger)
Nothing helped, so I returned the phone to the seller, and they gave me a new one - it's charging perfectly.

Broken USB/charging port?

I'm not sure if this is the right place to ask this, please excuse my ignorant.
I have an EVO that won't charge. I've read a lot from Google search results that this is a common problem among many users. However, the port seems to be working, because my computer will recognize the phone and storage when I plug it in. The charge led will come on, and the indicator on the phone will say that it's charging, but the phone is actually only discharging while plugged in. Eventually the led will turn itself off, and the phone stops telling me that it's charging when the battery is down to its last drop.
I hope that someone with similar problem can help me with fixing this, or if anyone cause tell me if it's possible to fix? I want to send it in to HTC since I think the phone is under warranty, even if I don't have the protection plan from Sprint? The problem is the touch glass is cracks, and I don't know if they'll fix the USB port without saying that I broke it and won't cover that under the warranty. I want to buy a new screen and replace the broken one, but if I open up the phone it would void the warranty as well...
So I'm stuck with a discharging phone, cracked screen, and having to carry around 3 separate batteries everyday, and I have no idea what step I need to take.
Please help?
Have you tried plugging it into another charger? It may just be the charger that is screwed up. If this behavior pattern is consistent across multiple chargers then you may want to talk to Sprint to see what options you have.
Concordium said:
Have you tried plugging it into another charger? It may just be the charger that is screwed up. If this behavior pattern is consistent across multiple chargers then you may want to talk to Sprint to see what options you have.
Click to expand...
Click to collapse
Doubt it's the charger as it was stated that the computer connection works - should get a bit of a charge from that. I agree that a Sprint visit is due.
Just went through this myself! Would plug my phone in before bed and wake up with the phone at 2% or so. Thought it was the battery- so i took my battery to have the sprint store check it, they did say it was bad. So i bought 2 batteries off ebay.
I got the batteries and still had the issue. So then I took my phone to the sprint store and had them check the micro-usb port. They said it was fine and they cleaned it out cause dirt/dust was in it. Still had the problem..
So I bought a new micro-usb cable of monoprice (still using the same wall charger) , and that solved the issue! Had a bad cable. Now my phone charges super quickly in matter of 4hrs.
It could still be the charger. The USB cable sends data and power through different pins. So a bad cable could still transfer data while not pushing a charge.
Sent from my PC36100
It's gotta be the port happen to mine and I was able to get it fix as long as the port was still attached to the motherboard, if its not attached then have to go thru the insurance.
EVO with Identity Crisis
I was able to connect to my computer and send data just fine with the old (broken) usb cable.
I've tried three different cable and a car charger, same result; they all say the phone is charging but it only gets discharged. USB/storage connection works. Last time the Sprint store said the battery is faulty, but I have 3 different ones and neither will get charged with the phone plugged in, an external charger will work.
kzn said:
I've tried three different cable and a car charger, same result; they all say the phone is charging but it only gets discharged. USB/storage connection works. Last time the Sprint store said the battery is faulty, but I have 3 different ones and neither will get charged with the phone plugged in, an external charger will work.
Click to expand...
Click to collapse
Definitely sounds like a port issue then. If you return to Sprint and review what you've done, as well as the result of your previous trip, then they should be able to take care of you. If they try to tell you it's the battery again just stand your ground. Good luck.
I had a similar issue. I tried everything. It wasn't until I found my HTC cable that it started charging again. I work in IT and tried cables from everything I could get my hands on (blackberries, external drives etc. ) The cable that came with my phone was the only thing that worked.
Sent from my PC36100 using XDA App
Had same issue except couldnt sync. Eventually couldnt charge at all...Had port replaced ans can charge all day but no sync still....sucks but at least I can charge.
mexigga said:
Had same issue except couldnt sync. Eventually couldnt charge at all...Had port replaced ans can charge all day but no sync still....sucks but at least I can charge.
Click to expand...
Click to collapse
If you replaced the port yourself, I would love to know how to do it!
Took the phone back to Sprint and they said there's nothing they can do. I don't have the protection plan so I couldn't even pay the $100 to get it replaced (although I probably wouldn't as I can upgrade my contract and get a new phone soon). They also told me that HTC wouldn't cover it under their warranty because the screen is cracked and they will blame that on me for misused. I tried to check the warranty policy on HTC, but the page is not even available. Does anyone have experience dealing with HTC? I bought a replacement screen, I'd like to replace the screen but don't want to open up the phone if there's a chance HTC will fix the USB port...
HTC EVO 4G Won't - Stopped Charging Battery Issue
Hey Guys,
Two nights ago I woke up to an EVO that was plugged in with a Cellet
extractable charging cord, as it is just about every night. But, the phone was
still showing that it was charging the battery, animation with lighting bolt,
at only 50% charged after about 6.5 hours of charging. Hmmm....
The latter after trying to charge in the coffee shop first with Cellet chord in the
wall then a portable 3500mah solar portable charger; the phone not seeming to
charge at or past 50% charged.
My EVO is rooted but still with the stock ROM and the gingerbread 2.3.3 OTA
update. The battery is a Seido 1750mah and SetCPU is at 245 - 998mhz. The
phone has only been rooted for a few weeks, but I don't see where rooting
would interfere with battery charging.
I've pulled the battery out, several times to no avail. Switched back to the
stock battery, same results. However, if the battery is less than 50% full
the phone will charge the battery to 25% or 50%, weird. If the battery is
at 75% or more full, the phone will top off the charge to a green LED at 100%,
sometimes. Sometimes it won't fully charge the battery. Weird.
I read different posts regarding poor USB chords so I pulled out the stock
micro USB to USB, a charge only chord I figured, and am trying to top
off the Seido battery, which it seems to be doing as it's now full green but
still charging as the animation shows the bolt in the battery and the LED
is still orange.
If put the batteries in the Seido wall charger, the thing the size of a deck
of cards, both batteries fully charge.
I also use Screen Off by Iwashi Soft. That app has worked pretty well with just
a little funkiness now and then. However, while plugged in, I hit the power
button, instead of the home button to turn on the home screen. The phone
wouldn't open to any screen nor would turn on or off. So I ended up
yanking the battery to turn it off then reinstalled battery and turned phone back
on. I don't know if that had any effect on the charging issue, but I took
the icon off the homescreen and am using the power button only, for now.
I don't think both batteries are faulty at the same time at this point. I
don't know if the screen off app caused some wake issue that interferes with
charging the battery.
I do know that when plugging in the phone to charge there's a bit of clunkiness
initially as the phone locks for a second before allowing use for screen or app
and that's always been the case since the gb update. Also, the LED doesn't
always turn green from amber when fully charged with the screen off until
you reboot or use the phone in some way while still plugged in. So there is
some kind of wake issue in the stock ROM. But the latter has never stopped
the battery from charging.
I do know that Plume, the twitter app, started acting clunky with not updating
in the background unless I opened the app at least once after a reboot. But
I don't know if the latter is a wake issue.
Battery still seems normal. Heavy normal use, lots of SMS, tweets, Pulse reading,
Dolphin browsing, I'll kill 50% or more of the battery in 4+ hours. Otherwise, the
phone mostly in standby with periodic email and twitter reads, the battery lasts
all day or more than 24 hours. But the latter rarely happens anymore because I'm
a user.
The battery just went full charge with the stock charging cable just now.
This morning, I woke up with a dead phone, auto shutoff even though it was
plugged in which I did after solitaire and before going to sleep; as a charging
test.
I don't know if it's the phone or the Cellet retractable cord or both that's
stopping the battery from fully charging normally and consistently. I'll need
to get another data-charge combo chord and do more testing; and a new ROM.
Any ideas anybody?
try a new rom and also try using the stock charger and usb cable. Check inside your usb port on your phone for dust as well. Also go into recovery and wipe your battery stats. In the wipe menu for amonRa and under advanced (maybe here, i dont use cwm on my phone) in clockworkmod. also wipe your dalvik-cache just to clear any issues you may have, restart and give it a test. good luck
I just bought a phone with a broken charger port. Broke clean off the board, so my next step is to try to get liquid solder and stick it to the board. Did you take ur phone apart to see if the port is lose?
So I used the stock USB charging chord. Sure enough, it charged the phone.
Then I tried the portable charger at the coffee shop, worked. So the Cellet retractable
chord obviously had a short or something damaged/shorted for the charging part of
the cable after a year + of use and abuse.
What I don't understand, and haven't researched, is why there are charge only
chords; the stock USB HTC chord charges the phone, but the PC won't recognize
the phone's Micro SD card or the phone as an external drive. I presume the duo use
chords have a data path as well as a charging path. And yes, I know to switch the
phone from charge only to disk drive. The Cellet chord would provide the PC with
recognition for the phone's drive.
Considering the latter, what I'm not sure of, and haven't researched, is why when
the phone stopped charging, the chord eventually stopped charging, the phone
status still showed it as charging; the amber LED light on and the battery icon
in charging animation with white bolt showing? I presume that the charging path
still triggered the charging status, except once when I turned the screen back
on the battery icon was not animated and the white bolt not showing so I unplugged
the chord then plugged it back in where the battery icon animation continued.
Fortunately, or not, this forum returned 600+ results for 'battery not charging' and after
sifting through a few, the charging chord was mentioned which prevented a Sprint trip
and me contacting Seido; thankfully.
So I think manufacturers and ROM/kernel developers should visit this issue as a chord
that actually is not charging, or charging at an absurdly low rate, should trigger some alert
and not show a battery icon animation that appears to be charging normally.

Empty DHD not charging, not powering on, no led.

Hello people
A couple of hours ago, my phone shut down due to empty battery. I came home, plugged it in and booted it, all was fine. At about 60% I shut it off and went to have lunch, when I came back and tried to turn it on, I couldn't.
Led was orange at the time, I unplugged the power cord but the led stayed on! I removed the battery to be able to reboot it, but when I re-inserted it I still wouldn't boot.
Now no matter how I try to charge it, led stays off like it's not charging. Tried various different cables/chargers, the same. Tried to plug it to the charger without battery but no led flashed. Tried to boot without sim/sd card, still the same.
Any ideas?
My battery has never been changed (for a year now) and has had a bunch of full drains. Could this be a dead battery? :/
Well seems the phone is fried... I tried two more official batteries and no go...
Sorry to hear it. I thought that at first when I read your thread but I thought because I am not the most experienced person here, there might be some kind of fix.
HTC will most likely if not certainly replace this handset for you, seeing as it just happened out of the blue.
Well I certainly hope so, problem is I suspect it's an import (from another European country) and local HTC service generally does not do well with European imports.
Anyway I'll give it a try, meanwhile I'm getting a sensation soon
I have a similar problem.
I'm lucky that my girlfriend has the same handset as I do, the I could compare the phone abnormal behavior tho that of her properly working phone.
The first thing I've noticed, after a while when the charger was attached, was that the phone is very hot and that the battery keeps draining out in a surprisingly high rate.
After a while I've noticed that even when the phone is turned off it wont recharge. Sometimes the Orange LED is on when recharging while it is off, and the LED stays on for a few seconds after removing the charger, as if it was still charging. Note that the affects of connecting the charger to the phone, are mainly the ones listed below (not necessarily altogether)
* The phone indicates as if it recharges.
* Going to an infinite loop of rebooting and crashing.
* Getting hot when power supply is plugged, or at any time when the phone is turned on.
Ultimately the battery was empty, and the only way I had to keep using the phone (mostly to diagnose the symptoms listed here) was to swap the battery with the one of my girlfriend's device, and charge my battery in her device while using her's. That's the place to mention that the battery works just fine and that the phone is draining any battery, no matter what.
I took it apart to have a closer look at the source of all of the heat emitted while the phone is turned on, and it seem to come from the motherboard itself.
That's all I have.
The worst thing is that a friend of mine who helped me opening it up broke the pcb of the volume keys. Now I checked and It turns out that that pcb is actually part of the flex cable, which sort of extension of the motherboard and is mainly the second most important piece of hardware of all the phone parts (not that there are so many). If I would be able to expose the conductors inside the flat cable I might be able to solder an alternative volume pad I'll make out of old some miniature switches I have. The cable is very thin. any Ideas of how to expose the relevant conductors without ripping the cable apart?
Just a (late) update:
It's been almost two years, I had given the phone to a close friend of mine after a couple of weeks since writing the first post, just in case he could resurrect it, nothing.
Then, a couple of months down the road, the phone suddenly woke up! He tried to connect it with the charger, after months of not being able to charge or boot it up and somehow it worked. And it has been working flawlessly ever since.
I just got it back to give to my girlfriend until her sensation is fixed, flashing Viper now
In case something like this happens to any of you, don't give up!

Battery recalibration

I thought I'd share this in case anyone else has/is experiencing battery problems. Mine was somewhat strange:
When powered on, my One would charge using pretty much any standard USB charging cable and wall charger, however, if the battery drained all the way and the phone powered down, it would ONLY work with a cheapo Chinese wall plug and power-only micro USB cable. Weird, right? If I hadn't had this random cable lying around (I can't remember what it's from,) my phone would have been effectively bricked.
SO....after searching the web to no avail, I finally called Verizon who did say it was covered by warranty, but they wanted to check with HTC first, which is where I learned this little trick:
To recalibrate your battery to a specific charger (or in general) do the following:
1) With phone on and plugged in to the charger (kinda a problem if your phone won't charge...I suppose you could try it with it off as well...) Hold ALL the physical buttons down for 3 minutes (Power+Vol up/down) The phone will cycle a bunch of times (you'll see only the HTC logo.)
2) After the 3 minutes is up, leave the phone plugged in and don't mess with it for 10 minutes (I'd say leave it whether it is on or off at the end of the 3 minutes, if it's off turn it back on and let it sit for another 10 minutes or so, that's what I did.)
That's it! Apparently this calibrates the battery to the charger you are using & it did the trick for me. I can now let my phone die & plug it in using any charger I have & it will actually charge. I'm not sure if this will help with any other battery problems people may have, but it might be worth a try if you've exhausted your alternatives.

HELP! Can't charge Galaxy Tab S 10.5

I've been having all kinds of trouble getting my tablet to charge. It's acting really weird. Over the last couple of days, I will turn the tablet on and it will say 80% charged (after being plugged in all night). Then, with it still plugged in, it will drain down to 15% in about 30 minutes. Why would it drain so fast (if at all?) when it's plugged in? It's also been taking hours for it to charge once it hits that 15% and I don't use it.
At first, I discovered my charging cable was to blame. I'd plug it in, but the tablet wouldn't detect it was connected unless I pulled on the wires just right for them to make contact. Apparently there was a broken wire inside the plug of the cable. So I replaced it with a new cable. Everything seemed to be working good then, and was actually getting proper charges again. Now though, it doesn't seem to want to work.
I was using the tablet yesterday to check my email. It had been plugged in all day and not being used. It said it was at 100%. After about 10 minutes though, the tablet shut off saying "battery low". When I try to turn it back on, I get the battery indicator showing it's at 0%. So I left it plugged in the rest of the day and over night. I just went to turn it on about an hour ago, and it's still sitting at 0%!
I thought maybe the cable was bad again, so I found another charger and tried that. It does the same thing the other cable does.. It stays off until I plug in the cable. Then, as soon as it's in, the tablet "wakes up" and displays the battery indicator. Like, it detects a power source has been plugged in. But no matter what I do, and how long I keep it plugged in, it stays at 0%. I can force the tablet to turn on by holding the power button. It goes through the boot animation prior to loading the screen. Then, in about 5 seconds, it turns itself off again.
I don't think the battery is truly at 0%. If it were, how would it be able to boot up without even a cable plugged in? I really don't know what to do now. I've rooted it, so I can't send it in to Samsung for repair. I don't even think the warranty would still be good at this point anyway. The tablet is at least 3 years old (based on when I joined this site looking for root help). And I think it was 2-3 years older than that before I bought it. Is there anything I can do?
I can't wait anymore. So frustrating to own something that's worked great then all of a sudden decide to no want to even power on anymore. I've spent all day trying to get it to charge with other cables. I've tried chargers, I've tried just straight cables. Plugging into the wall, plugging into the computer, plugging into the USB port in the car. Nothing works. So I hopped over to Amazon to just order a new tablet. I can afford it, not big deal there. But then I saw a ribbon cable used to replace the USB port on the tablet. Maybe the port is bad? Lots of "highly recommended" reviews. I went ahead and ordered one. It was less than $7. If it doesn't work, I still have the money to go forward with buying a new tablet. If it does, money saved! I went ahead and bought the "customers also buy" kit, with a replacement battery (just in case it's not the port), and a set of tools. If the cable is all I need, I'll have a spare battery. If the battery is all I need, I'll have a spare ribbon. If it still doesn't work, I'll go back to my original plan.
Just kinda bummed this is where I have to go now. Why would it suddenly just stop altogether like that? Is it because I keep it plugged in 95% of the time? Should I keep it unplugged till it's drained then charge it and unplug it again right away? I used to have to do that with an old cell phone. This is my first tablet so I dunno. If I end up needing to replace the whole thing, it'd be nice to know from experienced users what the best way to do it is, and what, if anything, I can do to prevent it happening again.
I'd suspect the battery is kaput.
It's not a good idea to keep the battery on permanent charge, there's no need. Let it cycle normally.
Well, all told this was an educating experience. I got the battery first. It came about 40% charged. Once it was installed I used TWRP to create a system backup and downloaded it to my computer. Then I left it plugged in overnight. The next day it was down to 30%. So the "charging" indicator on the screen was just a bunch of lies. I got the replacement charging port a day later and installed it. I didn't do anything else with the tablet, just left it turned off and the charging cable plugged in. It said it was charging, but again, after about 12 hours of charging overnight, the following morning it was down to 18%. So I'm returning both the battery and the port. They may still be working fine, and the problem is elsewhere in the tablet. I accidentally broke the little metal connectors over the power button (it's a contact sensor, and the connectors sit on top and complete the circuit when the button is pressed) when I took the back off to replace the parts. I also cracked my screen, although I think it's just the protector I put on it. I'm not sure what else to try at this point. The tablet is essentially a paperweight now. I can turn it on and watch the battery slowly drain to 0%, but I'll never get any more use out of it. So I decided to do a system wipe prior to putting it away for some future project to try and rescue it. Now it's stuck with the "Teamwin" screen flashing at me. I give up. I looked at Amazon to see if I could just buy another one, but they don't have any "new" left. They're all refurbished or "slightly used" from 3rd parties. I looked at other tablets, and bought a new Samsung Galaxy Tab S5E. It looks like it has the best reviews and marks. The only issue would be the wifi, but it seems to be a hit or miss with people. Some people say it's a problem, others say they don't even have a problem. So.. <shrug> I'll see how it works for me.

Categories

Resources