Related
I have got this weird problem with my Qtek 9090, I can’t hear a thing from the speaker except incoming calls??? And there’s no sound when I pick up and no one hear me on the other side unless I use the headset or the Bluetooth headset, everything works great then even playing music !??
I tried with few other rom, but no success! I even tried with WM5
Could this have anything with the headset plug? Cuse when the headset is plugged (in normal case) you can only hear incoming calls from the phone!
Remove your bluetooth profile(s), and do a soft reset.
I have the same problem after I used bluetooth.
Guest said:
Remove your bluetooth profile(s), and do a soft reset.
I have the same problem after I used bluetooth.
Click to expand...
Click to collapse
Not even flashing with new rom is helping as I wrote
FFVIII said:
Guest said:
Remove your bluetooth profile(s), and do a soft reset.
I have the same problem after I used bluetooth.
Click to expand...
Click to collapse
Not even flashing with new rom is helping as I wrote
Click to expand...
Click to collapse
What has flashing with a new rom have to do with removing your bluetooth profile?
Guest said:
FFVIII said:
Guest said:
Remove your bluetooth profile(s), and do a soft reset.
I have the same problem after I used bluetooth.
Click to expand...
Click to collapse
Not even flashing with new rom is helping as I wrote
Click to expand...
Click to collapse
What has flashing with a new rom have to do with removing your bluetooth profile?
Click to expand...
Click to collapse
dude, thanks for trying to help, but you should know better. flashing with a new rom erase everything including the the BT profile. I still think the problem is the headset jack.
And there’s no sound when I pick up and no one hear me on the other side unless I use the headset or the Bluetooth headset, everything works great then even playing music !??
Click to expand...
Click to collapse
This is telling me that you DID install the bluetooth again, and so you have a bluetooth profile, what is causing the no sound problem!
I have exactly the same problem as you.. When I remove the bluetooth profile all is working fine again.. that is.. untill I set it up again, and use it.. Than the SAME problem is back.
thank alot , but still got the problem even with the BT-profile removed, I have to use the wired headset to be able to hear anything
Problem Solved :lol: :lol: :lol:
I Opened the damn thing and took a look at the 2,5mm jack and guess what, it was broken ( I remember dropping the phone once for a week ago), I just removed it ( I don’t use the headset but I need the speaker), and everything is loud and clear now,
and with a Sprite Backup file I’m back now :twisted:
!!!?
I have such problem, but I think it really barbarian means of solving problem.
Is there any cleaner way?
Re: !!!?
hishnik said:
I have such problem, but I think it really barbarian means of solving problem.
Is there any cleaner way?
Click to expand...
Click to collapse
I read in another post somewhere that there is a microswitch in/near the headphone jack that switches off the sound to the speaker. Apparently, if it sticks, you poke a paper clip in and twiddle it about and you'll free it.
no sound form jasjar
having same problem. poked around with paperclip and all that, but still no sound. dont need headphone jack because hoping to use latest a2dp hack form latest rom for jasjar to be able to use BT headset. will removing headphone jack affect using BT headphones? need external sound.
I also have a similar problem - when in phone mode, other side can hear me but i cannot hear them, if i plug a headset with microphone the other side hear me and i also have sound from other side.
if i unplug the headset, i cannot hear the other side but the other side can hear me.
are there microswitches inside the headset plug for both microphone and speaker (two microswitches) ?
thanks, yol.
just got my jasjar back after having cracked lcd and headphone jack replaced. sent to http://www.pocketpctechs.com out of california as suggested by very helpful user on this site. cost me around $20 dollars and took only a day to fix. works fine now!
My O2 XDA IIs is behaving rater unusally. For a while I've had the problem that many people have reported where I can hear nothing during a call but the other person can hear me. This could be remedied by a soft reset. However now, no amount of resets seem to fix the problem.
The baffling thing is though that the speaker hardware would appear to be working as MediaPlayer still plays music out of it and the phone still rings etc. However no sound what so ever comes through the 2.5mm socket now, from either a call or from MediaPlayer.
What on earth can I do to fix it?
My O2 XDA IIs is behaving rater unusally. For a while I've had the problem that many people have reported where I can hear nothing during a call but the other person can hear me. This could be remedied by a soft reset. However now, no amount of resets seem to fix the problem.
The baffling thing is though that the speaker hardware would appear to be working as MediaPlayer still plays music out of it and the phone still rings etc. However no sound what so ever comes through the 2.5mm socket now, from either a call or from MediaPlayer.
What on earth can I do to fix it?
Guys, are your problem similar to mine? My problem is that the speaker is not working even though playing mp3. I thought it was radio problem, so flashing new rom also doesnt help. It is really the headphone jack cause the problem? When i flash to new rom, the speaker works, but after the auto config, the speaker doesnt even sound.
Please advise me on this. Thank in advance
Guys, are your problem similar to mine? My problem is that the speaker is not working even though playing mp3. I thought it was radio problem, so flashing new rom also doesnt help. It is really the headphone jack cause the problem? When i flash to new rom, the speaker works, but after the auto config, the speaker doesnt even sound.
Please advise me on this. Thank in advance
Hi, I really need some help to solve theese:
After connecting Jabra bt620s (bluetooth stereo headset) to Artemis there are only two profiles under this device: Handsfree and Wireless stereo (i guess the last means A2DP). I can place and receive calls and listen to music in stereo, even turn volume up and down.
1. But other buttons on headset don't work No play/pause, prev/next and rewinding. So what do I need to make them work? Are there any bt stack patches for Artemis like for Prophet, or maybe some special software? AFAIK there has to be special bt profile support to make the trick.
2. How to redirect all sounds to bt headset in stereo? I REALLY want to listen to fm-radio through Jabra 620. But even when bt headset is connected to Artemis radio goes to either connected wired headset or built in speaker Is there any solution?
Thanks in advance!
BigND said:
Hi, I really need some help to solve theese:
After connecting Jabra bt620s (bluetooth stereo headset) to Artemis there are only two profiles under this device: Handsfree and Wireless stereo (i guess the last means A2DP). I can place and receive calls and listen to music in stereo, even turn volume up and down.
1. But other buttons on headset don't work No play/pause, prev/next and rewinding. So what do I need to make them work? Are there any bt stack patches for Artemis like for Prophet, or maybe some special software? AFAIK there has to be special bt profile support to make the trick.
2. How to redirect all sounds to bt headset in stereo? I REALLY want to listen to fm-radio through Jabra 620. But even when bt headset is connected to Artemis radio goes to either connected wired headset or built in speaker Is there any solution?
Thanks in advance!
Click to expand...
Click to collapse
Re:
1. In order for the controls to work, the device should support the AVRCP bluetooth profile. Not sure though whether the Artemis supports that profile, and in any case this would not mean there would not be other issues.
2. Do you mean that the no sound is received by the Jabra, or that it is being received in mono? If the latter there is a registry change to a 'JointStereo' setting that should do the trick.
leon100 said:
Re:
1. In order for the controls to work, the device should support the AVRCP bluetooth profile. Not sure though whether the Artemis supports that profile, and in any case this would not mean there would not be other issues.
2. Do you mean that the no sound is received by the Jabra, or that it is being received in mono? If the latter there is a registry change to a 'JointStereo' setting that should do the trick.
Click to expand...
Click to collapse
1. I guess that AVRCP bt profile is NOT supported on Artemis by default. The question is what can be done to somehow add this profile to Artemis. Applying some patches or something...
2. I mean that no sound is received by the Jabra. Sound goes to either wired headset or built in speaker.
AVRCP IS supported by the Artemis.
You need to make sure the player that you use supports as well. I have tried WMP and PocketMusic, and they both support it. Works great with my Jabra320s.
All my sounds are transfered automatically to my BT headset.. system sounds and my GPS program (MapKing) sounds.
Radio CAN NOT be run unless you have a wired headset inserted, as it acts as an antennae. Even so, I doubt sound will come to your BT headset. It just acts that way.
CHeers.
MasK said:
AVRCP IS supported by the Artemis.
Click to expand...
Click to collapse
Indeed it is. It was Mort player's problem. Last release version doesn't support control buttons, but final available beta does!
MasK said:
All my sounds are transfered automatically to my BT headset.. system sounds and my GPS program (MapKing) sounds.
Click to expand...
Click to collapse
Is is not ALL sounds, because radio sounds are not going in!
MasK said:
Radio CAN NOT be run unless you have a wired headset inserted, as it acts as an antennae.
Click to expand...
Click to collapse
Sure thing I do plug the wired headset in. But sound goes to either built in speaker, or wired headset.
MasK said:
Even so, I doubt sound will come to your BT headset. It just acts that way.
Click to expand...
Click to collapse
I REALLY hope that there IS the way at least to redirect radio output to bt headset instead of built in speaker. Maybe registry tweak or some special software.
So research on this topic continues!
You might wanna try the following:
http://www.simplesmartphone.com/BlueCast/
MasK said:
AVRCP IS supported by the Artemis.
You need to make sure the player that you use supports as well. I have tried WMP and PocketMusic, and they both support it. Works great with my Jabra320s.
Click to expand...
Click to collapse
Mask...I'm using same Jabra 320s as you. I am having a problem however. the music is skipping kind of like a scratched cd. Also the music intermintently speeds up and slows downs. Do you have this problem? Any ideas how to solve this?
MasK said:
You might wanna try the following:
http://www.simplesmartphone.com/BlueCast/
Click to expand...
Click to collapse
Well, I gave it a try, but didn't download Microsoft .NET Framework 2.0 yet. On fist try it doesn't do the trick Maybe because of lack of that MS thing. I'll get and try it later.
Thanks for helping anyways!
zen123 said:
Mask...I'm using same Jabra 320s as you. I am having a problem however. the music is skipping kind of like a scratched cd. Also the music intermintently speeds up and slows downs. Do you have this problem? Any ideas how to solve this?
Click to expand...
Click to collapse
Whoa.. the speeding up and slowing down is little.. but noticeable. I didn't know anyone else would notice it.. hehe
Yes.. I do have that.. it happens especially after the pause.
I set my BitPool value to "45".. which has very little noise, but hardly skips. The thing is, I feel that if I make sudden moves or go further than 2 metres without a straight line of sight, the music will get cut off
Higher bitPool value will increase quality, and pauses.
How about you? What is your bitPool value?
Set to 45 aswell also do notice a high freqency wail in the background.
zen123 said:
Set to 45 aswell also do notice a high freqency wail in the background.
Click to expand...
Click to collapse
Yes it does.. but I'm outdoors and commuting most of the time when using the headset, and thus that level doesnt bother me much. It's a balance I would say.. But could be better..
If you do find a good tweak to increase the bitPool without skipping, do lemme know
MasK said:
You might wanna try the following:
http://www.simplesmartphone.com/BlueCast/
Click to expand...
Click to collapse
I was looking for a way to do this, and this worked first time - thanks
I'm just using a mono headset - but it's fine
I'm using an Bt Midland in my helmet and i can hear music, navigator and also speacking and calling perfectly but i have not found the method to use the Radio trasmitter.
I've the adapter miniusb jack, and i've tried with some different software like Blue Music, Bta Router and a2dptoggle but nothing happens.
same trials in tc forum with even keeping the wired headset connected still no dice
on getting fm to the bt headset could be a hardware limitation
thank Rudegar.... i'm still searching fora any solution.... but is strange cause i cah hear the BT emitting the classical sound of "BIP" everytime i tap any things in FM Radio
I think you should give a try to BTAudio Toggle. This does not requires installation. Just copy to mobile open BT and run BTAudioToggle.exe.
thanks freco.... i've tried, but the radio dosen't transmitt.
as long as I know, you have to plug in the regular headset to be able to enable FM transmitter, because the headset is used as antenna. and then I would go for btIO, you would find it somewhere here for sure
...just my 2 cents
ies...headset are connected to mobile. i can hear sound from the speaker of headset and of mobile but it dosen't go in BT
...well, tried it at home and have to say that it doesn't work either. everything else is hearable on bluetooth exept radio...think that this is a FM transmitter-program problem. it seems that it's only able to play it trough speakers or wired headphones
aternem said:
...well, tried it at home and have to say that it doesn't work either. everything else is hearable on bluetooth exept radio...think that this is a FM transmitter-program problem. it seems that it's only able to play it trough speakers or wired headphones
Click to expand...
Click to collapse
yes, i think so.
i've asked here cause in other italian forums nobody has solved the problem.
First of all, I would like to says big thank to all rom cooker. You all did a very great roms. However, I still have a little problem that annoy me a lot...
I had connected the stero bluetooth headset with Hermes and choose both "Wireless Stero" and "Headset" profiles in bluetooth setting.
Then when there is incomming call, the Hermes will not ring. So I had a lot of miss calls.
However, if I disable the "Wireless Stero" profile in bluetooth setting, the Hermes will ring normally.
I used to use the Prophet before and there is no problem. The Prophet will ring normally although I choose both profiles.
The stero bluetooth headset is the same, iTech Clip Radio.
I had tried on many roms and found the same problem. So I guess that maybe I have to modify the registry setting to enable ringing on "Wireless Stero" profiles. Can somebody help me to solve the problem please???
I have the same issue and assumed that's how it worked since I just got this Jabra BT8040 that supports wireless stereo. It would only ring through my headset when wireless stero was enabled. If there is a way to get the phone to ring also that would be great. Right now I do the same thing as you, disable the wireless stereo until I need to use it.
My guess is this is by design since all sound is routed to stereo headset then so would the ringer. This isn't an issue for me since the Jabra BT8010 I can turn on/off stereo by simply pressing a button on the headset.
Sorry don't know of a solution.
Thinking about it I guess you could use something like mortscript and make a button that turns stereo pairing on/off to make it simpler I dunno.
I have similar issues with the PAYS rom, when listening to music via my BT earpice (Jabra) where you click the answer button on the earpice it then takes the music from the device and plays it through the jabra ONLY for about 5 seconds and then defaults back to the device?
Any suggestions would be appreciated?
Please help me before i go crazy on this!
I bought a new handsfree (Plantronics Voyager 520) hoping it was something wrong with my old one.
So my problem is that when I use my handsfree I hear alot of noises and sometimes I can´t even hear the other part because of that. But it seems to be only me that hear this, not the one I talk to.
I tried changing the Linespeed value in registry, but that didn´t help.
Maybe if I flash a new radio??
I have searched, but havn´t found any help. Dont know if this is a known problem?
Someone knows?
It seems to be something with the reception. All i hear is alot of cracking noise.
I have also tried with my Jabra BT3030 and the sound is good. But not when im using any of my headsets.
I, too, use a Plantronics 520 with my AT&T Tilt2. I hear lots of snap, crackle and pop but the other party does not hear it.
Anybody?
using a Plantronics Discovery 925 and it's pretty clear. No call quality complaints from both sides. Only complaint I have is it picks up too well sometimes the other party can hear some unwanted noises...
I havn´t found a solution to this problem. Someone else have a good idea??
Double post
I use a Jabra Dogtag with the touch pro2, i have clear sound in music and phone works also good.
Even the play, next and prev keys work perfect.
Try going to the bluetooth menu and activate stereo sound instead of headset (Maybe
Or turn off secure connection.
This might not help, but who knows
MikeAffec said:
I use a Jabra Dogtag with the touch pro2, i have clear sound in music and phone works also good.
Even the play, next and prev keys work perfect.
Try going to the bluetooth menu and activate stereo sound instead of headset (Maybe
Or turn off secure connection.
This might not help, but who knows
Click to expand...
Click to collapse
By Dogtag, you mean BT3030?? I have one of those also and it´s working for me. But when i connect to one of my hedsets it´s very bad sound.
I have an old SE and a new Plantronics, but same issue with both. But only when i connect those to my TP2. Both those are mono-headset you put on your ear.