Hi,i'm from spain, i'm speak english a little bit, have a new m500 and have a problem when update whith driver of qteck. the problem is in the image, i read the tutorials for this problem and dowload de program for no id but dont run. please hel me.....
Thanks
En español,
socorrrooooooooooo, m5000 de amena, no puedo actualizarlo por que me sale el error de la imagen, lo he intentado todo, he lido los tutoriales de esta web y me he descargado los programas necesarios y nada. alguna ayuda???
muchas gracias.
Didi you find an answer for this, i've got the same problem.
well you guys can try this. it works when i tried upgrading a s'pore dopod 900 with a orange m5000 rom and got error 120. use buzz's uni_unlock v1 (www.buzzdev.net) to CID unlock the phone (even if phone isn't locked) then flash using bootloader mode. ...EDIT: sorry its superCID and not CID unlock. google for its meaning
Zaheer
I'm new to the SPV world and only had the M5000 for about a week. Can you be specific. Not sure about flashing using the bootloader mode or what the uni_unlock v1 actually does.
Cheers.
i tried to help but i just could not connect to xda-developers website other than on my opera mobile. it could be a prob with their server. i guess you'll just have to wait. meanwhile why don't you visit www.buzzdev.net or on this forum under universal upgrading, stuff about uni_unlock v1 and flashing using bootloader mode. sorry for that. i'll try to log in again later
Ok here we go. To make your phone superCID use the utility by buzz here http://buzzdev.net/content/view/78/1/ (read also the forum link if still in doubt) , and to flash your phone using bootloader, here's how.
On PC,
Unrar/unzip your chosen rom (right-click on rom exe) to get nk.nbf (OS rom), ms.nbf (Extended rom) and radio.nbf (Radio rom). You'll also get the Update_Utility, ROMUpgradeUt. if these files are not in the same folder as the utility move them all or any one to where the utility is, the RUU folder. P.S you can choose to only upgrade the .nbf file that you need e.g nk but not radio.
Phone,
Hold Backlight and Power button while at the same time press Reset key to go into bootloader mode. Connect phone to PC. P.S Activesync must have already been installed (for drivers) but need not be active as in BL mode activesync will not detect phone but PC does.
On PC,
Open the folder where your prepared ROMUpgradeUt is (RUU folder) and click/run the ROMUpgradeUt. you'll get a welcome screen.
From here onwards it is the same as it would be like if you upgrade via activesync. (.EXE method).
P.S some people may have other ways of circumventing the Error 120 but thru' trial and error this is how i sucessfully did it. Good luck.
Here's Buzz's explanation of what superCID does to your phone. Quote "Anyway, just to be clear, with SuperCID device you can now perform bootloader commands, which were previously locked. You can now do SD card dumps, load .bin files, read write different areas of device... ;o)))"
cheers
Zaheer
That worked a treat, i can now use the mobile phone and the Protocol version is also back.
Do you think it would be advisable to try and run the ROM update from the orange web site. Not sure as i thought my SPV as a mobile phone was dead for good.
I ran the UNI_Unlock v1.exe so presumably my spv will accept the ROM but i'm not certain.
Thanks for your help, much appreciated.
Zaheer
Thought i'd take the plunge and try and run the ROM update again anyway. It's updated fine this time with all the new versoins and everything is working fine.
Cheers again.
glen5h said:
Zaheer
That worked a treat, i can now use the mobile phone and the Protocol version is also back.
Do you think it would be advisable to try and run the ROM update from the orange web site. Not sure as i thought my SPV as a mobile phone was dead for good.
I ran the UNI_Unlock v1.exe so presumably my spv will accept the ROM but i'm not certain.
Thanks for your help, much appreciated.
Click to expand...
Click to collapse
As you've found out once you've unlocked the phone you can upgrade to any universal's rom available here and at buzzdev.net. infact with a superCID device as stated by buzz, you can do more than just that. Congrats.
Where can I download this unlocking tool? The link to it on Buzz Dev just displays a blank screen..
Related
I did not get the upgrade out of the PDA first, it is in bootloader mode.
By mistake, I picked up a XDA II upgrade instead of PDA III and clicked the sucker, only to get bummed completely. I guess it "deleted" the orig OS, or parts of it.
The BA is from o2, but private buy, no support expected from them.
The BA was in German, there is no "ID" for o2 given in the ID table.
I even tried T-kom's blackberry upgrade (German) gives same error as the 3 WWE SHIPS I tried, 120 "Country ID error"
Anyway to get the needed ROM info with the bootloader only ?
I would not mind the BA_5.1.1700_build_14343_Upgrade Engrish...
Somebody please help bring my new thang into life again
Hi Man,
Do not worry...Just upgrade the ext rom part of any ROM u have and it will be live again...then u can re-upgrade it completely
One problem I recognize I have: how to get DevData...
Thanks for the assuring words. But I have no idea what you mean with :"upgrade the ext rom part of any ROM u have and it will be live again."
I Assume the ext rom is a nbf file ?
I tried several of the ROM linked from this site (without modifiying them) no succes.
The nice guide made, explains how to get devdata on the PDA when working, but how to get that when bootloader mode is only option ? Or is that necessary? Are there ROM's that works anyway ??
The guide says:
"Device data reads:
PH20B 0 B GER R T-MOB101 1.12.00 0 0 1.12.100 1.02.00 02.00"
I do not have any of this info on my PDA Can it be retreived from the PC ?? (with a program)
I might also explain why I wanted to upgrade the ROM and didnt realize how "complicated" it can be. When trying to install a new appl. (Copilot) with a SD-card, the BA gave:
"setup-Fehler
Die datei "\storagecard\\2577\tts.cab ist keine gultige datei fur windows CE setup"
So, I thought the ROM version was ****ty not even knowing CAB files!
Any hints & help much appreciated
Rgds
Okeh..
Learned alot during the day on this site, it RAWKS!
I found the BA_TMUK_14200_112_11300_Ship (ENG)
& the MDAIII_TMDE_14201_116_11300_Ship (GER)
Using the "MaUpgradeUt_noID" I managed to get the GER running
Dropped the RADIO ROM of the GER to the ENG version and tried runnin the MaUpgradeUt_noID from that ROM. It worked!
The "standard" windows theme is NOT in the ENG pack, but in the GER one.
I then try run these Copilot cab files, still no luck ?!?
Tried some other CAB files snagged from the FTP, they worked...
I both tried the SD card install (autorun the cab) and from the install CD (to PC & device) both gives same error ? A little suspicious that none of the 2 install options work. Perhaps copilot is NOT compatible...
Hi all thanks for looking at my thread.
I'm try to upgrade my Dopod D810 and i encounted a problem and would really like some help here.
The steps i thought i should take were the following
Run...
Unlock and CID Unlock
HardSPL
Radio
ROM
However, after running the Unlock and CID Unlock, i tried to run HardSPL.
But i come accross the "ERROR [246] DEVICE NOT RESPONDING" when i run the ROm update utility.
On the PDA with the 3 color screen
TRIN100
IPL-SSPL by Des
TIN100
SPL - 1.07.ds
and in the white "USB"
what have i done wrong? should i have no ran the UNLOCK and CID Unlock? if so how do i revert this? and what are the correct steps to take to upgrade this?
I am a hermes user and i've done exactly what i did to my hermes to his one.
Please help me.
Kind Regards,
Jason
---------------------------------
guys please, i tired reading the wiki and it told me to run SSPL-TRIN on my device.
i ran it, tired running the utilites again and i get the same problem.
the wiki and text documents says that as long as my SPL ends in a ".ds" i should be able to flash any rom without a problem but i still cant.
all i want is to have a english ROM and the current radio
please help masters. i keep getting "ERROR [246] DEVICE NOT RESPONDING" when i try to flash LVSW lastest rom.
kind regards,
jason
----------
I have been able to upgrade the radio to 1.41.
but i still get ERROR 246 when i try to upgrade the ROM or HardSPL
I'm waiting for help and will be very greatful when someone responds.
Kindest regards,
Jason
have you tried to run the RUU again (leaving the device connected in bootloader, tri colour screen) after you get the error?
Same problem here...
Alternative flashing method.
I just can tell I success using MiniSD with TRINIMG.nbh and execute SSPL-TRIN.exe to flash it. Hope this help. Read Wiki for details.
EDIT
ok i understand that you are suggesting that i use my SD card to Flash the ROM in.
If this is successful i will be greatful but will i have to do this everytime from now on rather than through the computer?
jason
racerx_ said:
have you tried to run the RUU again (leaving the device connected in bootloader, tri colour screen) after you get the error?
Click to expand...
Click to collapse
Ok so i've tried to flash a ROM/HardSPL using the SD card.
i;ve rename the file to TRINIMG.nbh
and then i;ve loaded it in to the bootloader.
however i get a quick flash of a grey background with the word "Loading" and then it just goes to the tri color screen and nothing happens.
the Tricolor screen shows
TRIN100
IPL-0.50
TRIN100
SPL-1.20.Olipro
(white area) Serial(or USB)
Please someone help me out.
a member has mentioned that it is because i do not have Super CID and i should run the unlock. but i have done so.
please guru's of trinity! help me!!!
Personally, I've never been able to flash my phone from the SD card. Never tried before Hard-SPL, but certainly since it just does not work. Need a Windows XP machine (my vista 64 bit won't work - can't find the 64 bit driver for USB bootloader mode). Find yourself a windows pc!
nealed said:
Personally, I've never been able to flash my phone from the SD card. Never tried before Hard-SPL, but certainly since it just does not work. Need a Windows XP machine (my vista 64 bit won't work - can't find the 64 bit driver for USB bootloader mode). Find yourself a windows pc!
Click to expand...
Click to collapse
My attempts with the SD have not work, when i put the SD card in and put it in to boot loader, i get a quick flash of Loading and its just stuck on the tricolor displaying
TRIN100
IPL-0.50 (could this be the problem?)
TRIN100
SPL - 1.20.Olipro
(white area) serial
i do have a windows XP home machine.
man this is stressing me out. please guru's help me out
ok i dont know how but i've some how been able to upgrade to the lastest LVSW. there is a god (i've always known)
how i did this was i was trying to run HardSPL again. It went in to the bootmode while the Utitlty on the computer gave ERROR 246.
So i thought i'd run LVSW, and what do you know? it work! and upgraded!
the question i have is
when i load the bootloader screen i get
TRIN100
IPL - 0.50
TRIN100
SPL - 1.20. Olipro
but then ERROR 246 occurs
i get
TRIN100
IPL-SSPL by Des
TIN100
SPL - 1.07.ds
So does anyone know what is wrong with my Trinty?
What do you bootloaders show?
---------------------------------
edit.
i;ve also noticed that after successful being able to upgrade to LVSW when i look at device info.
my radio hasnt actually upgraded, but back when i wasnt able to upgrade the rom it said i had 1.41.
but now i only have radio 1.16. but i have been able to upgrade to radio 1.41. now.
I just use TRIN-SSPL.exe and make it go into SuperCID Bootloader mode. Then it ask me to confirm whether I want to flash it, press [Power] to continue and it work.
MJRL said:
Same problem here...
Click to expand...
Click to collapse
are you using xp or vista? If you have vista try that on a windows xp machine. I have seen that many time on my p3600.
Just my 2 cents
First time with vista, but after read so many problems with vista i've tried with xp, but gave same error has jasonchiu, i'll try has he did,ignoring the error
Is it possible that other files on the MiniSD?
Try format the memory card and write the files.
I am running Vista so this the only way for me,
I used this method to flash WM5 and WM6.
On the memory card, only
TRIN-SSPL.exe and TRINIMG.nbh
and the device is not SuperCID.
I'm running Vista and when I wanted to run the bootloader upgrade on my Dash I kept getting this message error. Error 260. anybody find any way around it? I've tried to manually set th ephone into bootloader mode, same result. help!! PS the error is supposed to mean "port already open" or "open port error" I'd really appreciate any help!
erro 260 - fixed
switches to my wife's laptop that had XP on and it worked like a charm. I'd be glad to assist anybody in the process od de-branding their Dash. Removing the ugly T-mobile paint logo on the unit was easy too.
ERROR 260
Sorry for thislong story....
OK, I've been on looking around the site for a while. I installed the WM6 Beta. I was looking for two days for the WM5 ROM only because I want the little things to work. Finally found it. But now every time I try to flash my phone ack to WM5 bI keep getting the 260 connection error. The readme only says to restart the comp and phone and try again. I have literally, no joke, done this 12 times in the last 2 hours, hoping maybe it will go. All the phone does is go to the green, blue, and red screen and stays there. Then the comp says it gets the error. I know it's connected because Sync Center syncs, I can look through the phone, install apps from my comp, etc. Also I tried doing the 'Update only' rom for version 1.11 or so, and it starts to go but then says its the wrong version RUU. Has anyone had this problem before? Flashing to WM6 did this once and then worked after.
I'm running Vista Premium, stock sync cable, Microsoft Sync Center for vista. All this is the sameas when I flashed to WM6.
There goes another 3 attempts, trying to change timing, reinstalling Sync Center, etc.
Decided to try it on my XP desktop, and for some reason, first time it worked. Maybe Vista didn't like it? Who knows..
Mladito Vista!!
Hi there,
I have the same little problem here!!!! I have a laptop with Vista (garbage)... so i´ll try on a laptop running XP...thank you for posting this, it was a big help..i let you know how it turns out... see you around
WM5 to WM6 --> Problems at 3%
Hi all,
I've errors upgrading my phone to WM6.
I Can open the Wizard (it`s a generic to S620/S621), but in 3% i`ve an error.
I think thats my phone has a blocked CID.
How can i unlock this? i`ve tryed with tools to unlock, but without success...
Regards,
Emerson
Hello,
Welcome to the forum.
Your problem is that your phone is CID-Locked. Hence, you'd need to use a paid service to unlock it. I personally used the following service which provides instant unlocking:
http://www.gsmliberty.net/shop/htc-excalibur-instant-remote-unlock-p-1452.html
I used a credit card, it's 39.99 $ - I was done unlocking and upgrading to Windows Mobile 6 in about 15-20 minutes.
Good Luck !
P.S:
Steps to install WM6
- First CID/SIM Unlock using GSM Liberty
- Flash Bootloader
- Install WM6 ROM (It will take some time for it to load so give it about 5-10 mins. it does get stuck at the boot screen for sometime but eventually it'll load)
- Install Office/Audio Manager
- Application Unlock your phone using SDA Application Unlocker
- Install the necessary software/tweak/hacks
there you go, if you have any questions, feel free to ask. also, if you use the search function, everything's available here.
Good Luck !
Here's the following links you require
1) Flash Bootloader
ftp://xda:[email protected]
2)here's the WM6 ROM:
http://files-upload.com/files/472108....90_Ship.ex e
here's office for those who want it:
http://rapidshare.com/files/31706137/Office.WM6.zip
here's Htc Audio Manager for those who want it:
http://forum.xda-developers.com/atta...1&d=1183909664
Ps. I better like German flash, it's smaller due to fewer language packs, and contains English, here: http://files-upload.com/files/472422....90_Ship.exe
thanks to jsp_m for the links.
Hi,
I`ve problems because my IMEI is from Brazil...
And in the site accept only 15 digits IMEI..
My imei is: 35*************02 (17 Digits IMEI)
Thanks,
Emerson
hey,
that's not a problem. everyone has 17 digits, don't include the last 2 digits when you type in your IMEI so for example
11111111111111102
just include the first 15 and submit and you'll get an unlock link in your e-mail, follow that link, scroll down to the page to download dashunlock software and download the .UNL file for your IMEI and then make sure ur phone is connected to active sync and it's green, open the dash-unlock program and then hit enter then it'll ask for the .UNL file, locate it and open it and your good to go - your phone will be unlocked then soft reset it or i think it's automatic and everything's set.
good luck !
p.s: in other words, don't include 02 when you type in your IMEI.
HTC Audio Manager
http://forum.xda-developers.com/showpost.php?p=1355010&postcount=5
Thanks!
I'll Try NOW and let all know...
Regards,
Emerson
Arrghhh!!
My phone still give the message:
Invalid Model ID [244]....
And now? i`ve payed 40 bucks for an unlock software....
Thanks,
Regards,
tatarezende said:
Arrghhh!!
My phone still give the message:
Invalid Model ID [244]....
And now? i`ve payed 40 bucks for an unlock software....
Thanks,
Regards,
Click to expand...
Click to collapse
Emerson;
Read the second post from luckybandit on this thread. That´s exactly what to do to get rid of the "invalid model" issue. Download the bootloader, flash the phone, flash the new ROM and be patient.
My excalibur is also from South America, and worked OK. If you have any doubt just let it know to this thread.
Boa sorte!
Hi,
I`ve problems with the link of Boot loader....
Anyone can send the full URL?
Thanks,
Regards,
Emerson
Hello,
I'm sorry about the links not working, here - i've attached the bootloader for you. here's what you do
1) Run bootloader (attached file)
2) Run the WM6 WWE ROM
3) Run SDA Application Unlock
4) Install Office/Microsoft Voice Command/HTC Audio Manager
5) Install Tweaks/Hacks
here's a site that has some applications and tweaks:
http://mobile.surrealnetworks.com/DashApps.htm
and search this forum, there's tons of information, hacks - etc.
Good Luck !
oh by the way, did you unlock your phone properly?
1) Download unlock software
2) Download .UNL file specifically for your IMEI
3) Connect phone to computer and make sure the activesync's icon has turned green
4) Run unlock software
5) When unlock software asks for .UNL file, browse for it, choose it
6) That's it ! It should say Unlocking done and it'll reboot
Your phone is now Sim & Cid Unlocked. If you have more questions, feel free to ask. just do what i said first then post.
Good Luck ! Hope to see everything working for u...
Hi again...
Now i`ve the Error 260 message everytime my phone boots in "Flash mode" (3 color screen)....
Follow my configuration in this screen:
Excalibur Wi-Fi RUU
ONBL 1.15.0000
Excalibur
SPL 1.15.0000
Excalibur IU
ERROR [260] - No connection
tatarezende said:
Hi again...
Now i`ve the Error 260 message everytime my phone boots in "Flash mode" (3 color screen)....
Follow my configuration in this screen:
Excalibur Wi-Fi RUU
ONBL 1.15.0000
Excalibur
SPL 1.15.0000
Excalibur IU
ERROR [260] - No connection
Click to expand...
Click to collapse
Hi,
Are you using Windows Xp? Cause I've gotten that error a couple of times too but it was in Vista. Try Xp if you're using Vista.
Hi!!
DONE with XP.... but now i`m affraid!! The "Green Screen" with nem OS apparently locked... this is normal? at least 3/4 minutos in the same screen.. both "patches" are applyed sucefully....
Is there anything else to do now?
Today I tried to hard reset my hp ipaq rx1950, so I search on the internet for the combination to reset it and i try to reset.
The device rebooted but something strange happens. At the end of the booting, when usually the operating system starts up, the boots stops. (I have wm5). It stops exactly at the end of the booting, when the status bar of the boot is completely filled. The hardware works but it can't enter in the os.
Someone can tell me what is happened and a solution to fix it?
Thanks and sorry for my bad english..
Nobody can help me?
I change my question.. Does anyone own or know how to obtain a rom for the ipaq rx1950 so i can reflash it from the sd via bootloader?
I have rx1950, but it in KOREAN, i can flash to change it to ENGLISh, because hpRUU can not detect model ID.
I search around the internet, but no solution...
Can I backup it, cook rom, then reflash?
Maybe you can..
Using mtty, and putting ipaq in bootloader mode (Contacts + Mail + Reset for as long as your PDA boots). Connect the ipaq to pc and open mtty (you also have to kill activesync process from the task manager, the process is something abount wcecommon.exe), then select "USB" and click ok.. Press enter until USB> appear. Insert a free sd card in your ipaq and type in mtty "r2sd", it will copy your rom to the sd card. after that i don't know how to continue to change language, but i hope you will share you rom with me so i can reflash my ipaq.
I downloaded the ROM from HP.com
Link is here: http://h20000.www2.hp.com/bizsuppor...=8&mode=2&taskId=135&swItem=PSG_I23197-108135
I'd like to ask about your flash method?
what is mtty?
My ROM is Korean, so that I think you can not using it, let try the link above!
Thank you!
I need the nb0 file, not the upgrade.. I need a rom exctracted from an ipaq rx1950, the upgrade you have linked is installable only via activesync, but i can't connect the ipaq to pc via activesync if it don't boot up the os..
If you have the nb0 file to boot the os via sd card, i'll use it. No matter if it is korean..
Mtty is a software that enable you to flash the ipaq without booting it, but i need the rom to do it..
hi guys,
same problem here (italian language) i read somewhere that we could extract the .nb0 from the .nbk file that is in the official hp upgrade but i don't know if it could work with the ipaq 1950 and of course i don't know how to do that. it's something about deleting the first 64 bytes of the file with an hex editor, i tried it but it didn't work for me. i hope it can help you and i hope then you can help me!
bye
How can i get the nb0 from my rx1950? (I'm newbie in PDA ^^)
ITKingdom said:
How can i get the nb0 from my rx1950? (I'm newbie in PDA ^^)
Click to expand...
Click to collapse
I think you can't. we need to extract the image from the .nbf file -CEOS.nbf in my case- but i have no idea how we can do it. I saw another thread (http://forum.xda-developers.com/archive/index.php/t-301856.html) about this issue, i'll try to work on it, but i'm definitively not a an expert in such things. If i have good news, i'll tell you on this thread.
if you find another solution let me know!
bye!
Does anyone know how many bytes i have to remove to make the nb0 or nbf file work?
blackgin said:
Does anyone know how many bytes i have to remove to make the nb0 or nbf file work?
Click to expand...
Click to collapse
not yet, i've read in some thread 32 but i'm not sure. have you seen this? http://forum.brighthand.com/showthread.php?t=243857
it seems it worked for some people, however it didn't for me.
chris malone universal bootloader removes the first 3690 bytes of the CEOS.nbf. now i can't try that file on a sd card, but i'll let you know. bye
trying to flash the rom by sd i get the message "wrong image", also when the bootloader tool tries to flash the rom by mtty the program stops and i have to kill it..
Could someone extract the rom from one working rx1950?
The procedure is the following..
-Download mtty from this link
http://wiki.xda-developers.com/uploads/mtty.exe
-connect the ipaq rx1950 to the pc with the serial cable and insert an sd in the ipaq
-Put rx1950 in bootloader mode: Contacts + Mail + Reset for as long as your PDA boots (it will be a white screen)
-Execute mtty
-Where there is written "COMX" (X is a number) select usb or something that is not like "COMX"..
-in the window that pops up press enter until USB> prompt appear
-Now type: r2sd and wait till the ipaq completes the backup..
So you now have a backup of your rom that you can use to restore the os..
Than upload this rom to rapidshare or mediafire or megaupload or another hosting site and give me the link to download..
Thank you so much
Nobody can upload his ipaq rx1950 rom?? please
try to ask someone who's selling a used 1950 on ebay, if you're lucky... Unfortunately for me, i need the italian version of the rom, because i think the english one won't work and nobody is selling an italian 1950. however if you find it please let me know.
good luck
I'm italian too smuzz, but i think that there is no problem in installing an english rom..However i wont buy an used ipaq.. I will wait for the htc dream and i will buy it. I only want to find a way to fix my rom..
Sono italiano smuzz, ma credo che non ci sia problema ad installare una rom inglese.. Comunque non credo di prendere un ipaq usato.. Ormai aspetto l'htc dream e lo prendo.. volevo solo rimetterlo in funzione..
I want to fix my ipaq too, I was just suggesting how to find another 1950 user to ask them to extract the rom. I posted in other forums but I received no answers, so I think it's a little bit hard to find them... Just a question: how much money HP want to fix it? if you have asked them, of course..
Sorry, i don't know..
Now i hope that there is someone who could share his rx1950 rom..
I've been reading this forum and the internet for about 4 days now,
hence I post this question...
I have an HTC P3300 (Artemis) and tried flashing windows mobile 6.5 onto the ROM..
it reached about 56% when the usb cable got unplugged and the flash failed.
I can get it into bootloader mode...
I'm from India and the original carrier was Idea.(I suppose so, because it had an Idea screen for a few seconds when the phone was switched on)
I used to use a Vodafone SIM, so I guess it was already CID unlocked.
Tried flashing various roms.. including the HTC windows mobile 6.0 worldwide edition, the t-mobile edition and the sprint edition from this site, after putting it into bootloader mode.
Windows Mobile Device Center will obviously not run, as the phone doesnt go beyond displaying this :
IPL 3.07.0001
SPL 3.07.0000
GSM 02.69.90
OS 1.27.0.0
I havent done a HardSPL and I suppose that the ROM flash only changed the OS ... everything else was probably the same.
I can't get mtty to work via USB....nonetheless, I have no clue how to use mtty.
Here are the filenames of the ROMs i've tried:
1. Evolution 23820 ...(downloaded off some site with windows mobile screenshots that got me all "WOW!")
2. Artemis Vanilla 2.0 WWE
3. ART_TMOUK_11311001_024990_WWE_Ship_R3.exe ..(T-mobile)
4. HTC_P3300_WWE_3.13.405.1_4.1.13.44_02.94.90_Ship_R.exe ..(this one should have worked)
5. HTC_P3300_NLD_3.13.404.1_4.1.13.44_02.94.90_Ship_R.exe ..(this one's probably german)
6. Microsoft Windows Mobile 6.0 (some .uif cd image that i downloaded off rapidshare..about 65 MB)
7. Opal_WM6.5_D24_21901_COM2_WWE (I know I shouldn't have tried this, but this was my first attempt after successfully updating a touchviva to windows mobile 6.5, but I was a complete n00b back then..)
I tried all these ROMs mostly using a "ROM Update Utility" included with the package..
I also tried getting the .nbh files out and putting them on a 1GB microSD after renaming them "ARTEIMG.nbh" ...it used to say "Checking SD card".. and then would show the RGB bootloader again with :
IPL 3.07.0001
SPL 3.07.0000
Errors I received while flashing through USB :
1. Invalid Vender ID (390)
2. Connection Error (260)
it generally stops at 3%
What should I do now?
Thanks for reading.
ouhh doesnt look very good. but happens aaand can be solved.
try this:
Hardreset your phone
or reinstall the originalrom in bootmode: link
please keep care of the usb cable. or try to reflash your phone via sd-card. its very easy and less dangerous.
tried both
hard reset lands u to the same place.. HTC logo and IPL SPL GSM OS...
installing the rom from the link given ... shows a connection error(in bootloader mode)
and did you try to install another rom via sd card.
wihtout pc-connection?
You have to first unlock your device by uspl and then install the rom or simple way is by using sd card. Search the forum for upgrading Artemis by sd
ok, but how do i use uspl if all i can get to is bootloader mode?????
i thought that u need to have windows mobile running well to use uspl...
WM5 English ROM
Does anyone have the windows mobile 5 english rom for artemis?
I tried the french WM5 rom from rapidshare.. but it doesnt work...
I got it to work!!!!
thanks to all you helpful kind smart people at xda!
well.. you people kept me searching for answers...
i found the original rom at an htc south asia site.. windows mobile 6.0
the htc artemis p3300 is also called "dopod" on that site...
anyway... the only reason i couldnt get to it in the start was that it said the cellphone serial number i'd entered wasn't eligible for the update..
i just messed with the last few digits (interchanged them) and got it to accept the download...
that was plain lucky,...
but it wouldve never happened if i hadn't tried..
now.. i'm going to do an artemis uspl via windows mobile device center according to the guides on various fora..
thanks people!
i want to post the rom to some site so that people can get it even 3 years from now... (most of my links were all from 2007.. so the rapidshare downloads hardly ever worked!).. but i don't know how..