Dear All !
Anyone please help me. I just by secondhand T-Mobile MDA III . used some days --> I press and hold the button in the top (Button for turn on , turn off screen ) --> after that The Screeen very dark and dim --> i removed battery for turn off the machine --> and turn On back --> the Screen bright --> "Win mobile setup ..." --> i touch the Screen --> appear --> the massage "ALIGN SCREEN : tab the target fimly and accurately at each laction on the screen . The target will continue to move until the screen is aligned "
and it screen keep long time , don't change anything !
Anyone know , pls guide me to solve this problem
Thanks
You need to realign your screen. It sounds as though you've experienced a hard reset since it's asking for this.
Just tap the center of each cross and complete setup.
Related
I've now got my XDA IIs and let it put O2 activeon to start with.
had a look,
then hard reset and got rid of it.
great
any problem is, no tool to go from portrait to lanscape screen orientation.
how does one get this back?
Select start, settings, system tab then select "screen" botom RH icon from here you can select screen oriantation - I know its not an on screen short cut but at least it gets it back for you, I wouldn't put the O2 active on the device it caused me nothing but trouble, I fail to understand why O2 sell the device with a rubish software load - Mike
Aother way if you want an on screen icon is to load up Omega One Batery Pack Pro. This will put the battery strength meter back onto the screen as well as other useful information, but in addition it loads "programe Bar" from here you can have short cuts to practically anything on the device - I have just tried it so I know it works - Mike
I've mapped my t-zones key (3rd from the left on the bottom row) to flip orientation.
Perhaps you could try that. :wink:
PHM tools does a free tool as well.
V
tap start - settings - personal - buttons.
from there u can reset hard keys to what u want. i have the home button stored to this, the first button above the call button.
i have a big problem my friend lent me an 02 xda exec. i hard reset it n now the problem is that whenevr the phone starts it says tap on the screen to setup ur windows mobile phone....but the screen tap is not working the keybaord is fully functional except the start menu i.e the window icon key and the i cannot tap on the screen with the stylus....please help :S ...though i can recive n send calls use all the rets of the keyoard but the touch screen doesn't work i can see everything clearly but the only problem is the tap input!
so hard reset it again and go through the setup properly.
buzz
Hi,
Maybe your alignment is out. ie your screen taps are off the mark.
Realign your screen (maybe with a hard reset like they say).
Just a thought
Michael
On a side note, I noticed a little "backdoor," if you will, when the initial Windows Mobile calibration and tutorial starts up - press the OK button and it will take you straight to the Today screen, but since the touchscreen hasn't been calibrated, it performs totally wacky when you touch the screen.
Of course, you can use the keyboard to get to the Settings panel and go to the Screen applet and recalibrate it from there.
thanks for helping but the thing is that firstly
when it says tap on the screen to setup ur windows mobile phone the screen taps do no work
secondly i press the okay button and the screen that i see in front is not my usual desktop ofcourse with the touch screen not working still
thridly i donnot seem to find the settings and all the rest on the screen because the widows is not setup on the xda :S
cyrus994 said:
thanks for helping but the thing is that firstly
when it says tap on the screen to setup ur windows mobile phone the screen taps do no work
secondly i press the okay button and the screen that i see in front is not my usual desktop ofcourse with the touch screen not working still
thridly i donnot seem to find the settings and all the rest on the screen because the widows is not setup on the xda :S
Click to expand...
Click to collapse
do a HARD RESET... push the little buttons on the keyboard that are dashes. They are to the left and right of the send and end call buttons. While holding those down reset the device.
So to repeat... DO A HARD RESET> am i missing something?
Cyb
i did a hard reset but still does not work
i did a hard reset then a screen appears after a i press 0 that says Tap here to setup your windows mobile phone. But when i tap on it nothign happens :S
Faulty screen?
i had same problem, just had to many hard resets, also take the battery out for an hour or two
My Artemis Orbit on O2 froze so I did a soft reset - no luck so I did a hard reset. The phone boots to the green screen which says 'Tap the screen to set up your Windows Mobile-based device etc'
However there is no cross to tap and screen taps do nothing.
I've flashed the ROM via the Bootloader screen (followed instructions to load the correct O2 Operator NBH file to the root of a Micro SD card) a few times but no luck.
I cannot find anything on this problem on the site but I can miss things!
Can anyone advise what I need to do?
Thanks,
Stew
Seems nobody knows what I should do here.
I can get to Bootloader and see ActiveSync but it won't go past the 'setup screen' where it asks for screen taps to align the screen. There is no 'cross' on display.
Which part of the software controls this?
On the inital screen there is no cross, but a screen tap anywhere should start the setup proceedure.
I cannot get a screen tap to be accepted anywhere. The Green Setup screen appears asking for a tap but that does nothing - I'm thinking a tap with a large hammer is coming to it soon! Only joking!
Is this a hardware fault I've got rather than a software problem?
There is no screen cover on it as I've read than can hamper screen taps.
I just resurected my xda IIs from the grave and upon start I come to the Align screen stage. I follow the directions as usual but it just keeps asking for the taps over and over and over. It never passes the same five steps. I've tried different ROMs but they all stop there. Could it be caused by the little internal battery being dead? Is my digitizer crap? Is it martians? Are the forces of evil combining against me? Am I doomed?
I'd like to see this old guy work again.
Thanks for any tips in advance.
Raven_coda said:
I just resurected my xda IIs from the grave and upon start I come to the Align screen stage. I follow the directions as usual but it just keeps asking for the taps over and over and over. It never passes the same five steps. I've tried different ROMs but they all stop there. Could it be caused by the little internal battery being dead? Is my digitizer crap? Is it martians? Are the forces of evil combining against me? Am I doomed?
I'd like to see this old guy work again.
Thanks for any tips in advance.
Click to expand...
Click to collapse
hard rest then hold the 2 buttons next to the volume slider only and press the rest button on the bottom using the stylus.this should take you to the 4 color screen with 3 options to be set
1st one leave as NO just press the top button
2nd option as yes by pressing the bottom button then press the top button to goto the 3rd
3rd option change to yes again by pressing the bottom button
then press the message button on the front that looks like an postal letter
this wil reset the options saved kind of like resetting a pc bios to manufacture defaults .
then try again to do the alignment.
I had similar when I flashed pdaviets rom to my blue angel and that resolved it
Thanks for the reply, unfortunately I broke me screen tinkering with it so I'm not able to test your idea.
I started with two LCDs one with a bad digitizer and one with a broken screen. I touch the digitizer off the one a replaced the other so that I had a working screen but then I had the problem listed above. Before I saw your response I thought I might have some dirt or something under the screen causing it to not work so I took it apart but I guess I was just a little too rough this time and cracked the LCD
I'll have to find a new LCD if I plan to resurrect this phone.
Thanks anyways for the help
stuck in 4 color screen
cyberjak said:
hard reset then hold the 2 buttons next to the volume slider only and press the reset button on the bottom using the stylus.this should take you to the 4 color screen with 3 options to be set
1st one leave as NO just press the top button
2nd option as yes by pressing the bottom button then press the top button to goto the 3rd
3rd option change to yes again by pressing the bottom button
Click to expand...
Click to collapse
I´ve tried everything with my XDA III PH20B1 - no camera model -, but I never get the 3 options screen. Just the 4 colors and bottom right the radio version R 1.10.00.
Is there any other way how to make my O2 XDA III boot after the WM6.1 upgrade ( from 2003se) ?
I have the same problem (I have already reply in another thread...), I am still trying to fix it. I suspect from the backup battery, since before I hard reset my SX66 all programs lost their configuration when I turn off and on again my SX66, and when I tried to realign the screen the align cycle repeated forever. Then I tried hard resetting, reflashing to various OS's and I can not pass the initial calibration screen.
Please keep me posted if someone have found the way to solve it.
Thanks !
no need to upgrade or delete anything from bios,this is not a cause of motherboard and software.I removed the motherboard and essembled in a working screen phone.there is no problem all ok,its not a problem with backup battery too.Then i changed working phone motherboard to cant align phone but same as before it dsnt align.Therefore in my investigation its a problem with the touch or screen.
its not a problem with screen cover too.
If any knows the exact solution for align problem screen ,please post it.
eway - press the power/stand by and leave for 15-30secs
then pen reset, press [cam] + [rec] as the 4 colour screen comes on and change 2/3 - as previously stated countless times - press [mail] to reset - this will reboot your new rom.
touch flo user manual is a little allusive
but, soo much too test, soo little time
#===#===#[]#===#===# . . . . . . . . . . . . . _-=d.b=-_
riya2008r2k - can you plz show some pictures of the internals of a BA ?
I for 1 would be very interested, too see. . .
post a link, please!!
How to bypass Align Screen?
If you have flashed a proper rom/ hard reset your device, there could be some dust on display which won't let the align screen pass. This is a real annoying feature on WM platform. But guess there are always ways to bypass software related issues.
The display can be cleaned by patting a small amount of water on it, and then running the water along with a visiting card on the edges of the screen. This will take off all the dust on the sides, and will let you pass the align screen easily. You can simply wipe the display propely with a glass cleaner.
If this doesn't help then :
When your phone says align screen, connect the phone with computer and get it detected in Active Sync. Next, you could be able to access Tree/Files on your phone. If you are able to do so, then go to startup and delete files directing to Align Screen, if I remb it was "welcome" something. Delete the file, and there won't be any align screen.
or
You can always go for an easier method. Download Code Factory's Remore Screen Alignment (http://www.codefactory.es/en/downloads.asp?id=108). And simply enjoy.
In both of the case, active connection with Active Sync is important. If you are unable to connect your phone, then I believe there ain't any way other than changing the display.
Hope it helps.
wbr
Sonny
O2 Flame
Hello everybody,
I've got a serious problem with my 2 years old O2 Flame: sometimes, when I reboot my pda, I can't realign the screen. And when I can do it, after a while, the left of the screen doesn't respond, or, when I click on it, it's another part of the screen that answers! I flashed the bios already: nothing changed.
@Gerd
Did you try Remote Screen Alignment?
Sonny
wow, that tool is awesome. My digitizer is cracked.
Disillusioned said:
@Gerd
Did you try Remote Screen Alignment?
Sonny
Click to expand...
Click to collapse
How do you do that please ?
Zincubus said:
How do you do that please ?
Click to expand...
Click to collapse
Try steps from this post : http://forum.xda-developers.com/showpost.php?p=1769443&postcount=1
This is for HTC Wizard, but it should work.
I m a user of htc touch pro 2.
my phone's screen and touch had been broken and I had my phone repaired , I mean they changed the screen and the touch . ıt worked for a while (2-3days).
but after , power button broke down , in such a way that when I push the power button , screen light turns off , but , if I push the button again in order to get my screen light on , it doesnt work .. screen remains dark
but normally my screen works properly.
can anyone help me to handle the problem ?
thank you
TuHu said:
I m a user of htc touch pro 2.
my phone's screen and touch had been broken and I had my phone repaired , I mean they changed the screen and the touch . ıt worked for a while (2-3days).
but after , power button broke down , in such a way that when I push the power button , screen light turns off , but , if I push the button again in order to get my screen light on , it doesnt work .. screen remains dark
but normally my screen works properly.
can anyone help me to handle the problem ?
thank you
Click to expand...
Click to collapse
That sounds like processor lag to me. I have the same problem on my phone. Can you perhaps tell me what software you have running when that happens
I use Europe_1.86.401.0_Radio_Rhodium_4.49.25.17 rom version . whatever the program is ; I always encounter this problem . when ıt is in sleep mode , I never get the screen light on, back ... ı must restart the phone , then it works..
there is a film under the phone keys connected to the mother board .. do you think the problem raises because of these
Please .. Help me ..
TuHu said:
I use Europe_1.86.401.0_Radio_Rhodium_4.49.25.17 rom version . whatever the program is ; I always encounter this problem . when ıt is in sleep mode , I never get the screen light on, back ... ı must restart the phone , then it works..
there is a film under the phone keys connected to the mother board .. do you think the problem raises because of these
Please .. Help me ..
Click to expand...
Click to collapse
That sounds like the Sleep of Death. That seems to be a common issue of these Rhodium-modeled phones. I'd link you to it, but I'm typing this from my Rhodium and I'm low on memory so I can't search for you
TuHu said:
I use Europe_1.86.401.0_Radio_Rhodium_4.49.25.17 rom version . whatever the program is ; I always encounter this problem . when ıt is in sleep mode , I never get the screen light on, back ... ı must restart the phone , then it works..
there is a film under the phone keys connected to the mother board .. do you think the problem raises because of these
Please .. Help me ..
Click to expand...
Click to collapse
try flashing a custom ROM and see if the problem persists