Im trying to get my HT820 BT Headset to work with my 8125 on cingular. just wondering if there is an A2DP.cab i could load instead of having to upgrade the rom?
also...whats the differences between A2DP and AVRCP?
bokinsmowl said:
also...whats the differences between A2DP and AVRCP?
Click to expand...
Click to collapse
A2DP (Advanced Audio Distribution Profile) is the BT profile allowing stereo sound.
AVRCP (Audio/Video Remote Control Profile) is the BT profile that handles the play/pause/next/previous/etc button presses on your headset. So you can play/pause/skip etc by pressing headset buttons instead of picking up the handset to do it.
All you wanted to know can be found here: http://en.wikipedia.org/wiki/Bluetooth
Related
hi everyone. is it possible to listen to my windows media palyer mp3 and other audio in a bluetooth headset? i bought a BT headset and got it to wotrk on my xda2 for incoming and outgoing calls...but when i listen to my audio in windows mobile, the sound still comes out of the xda2...
i hope you guys have something for this...
thanks.
I have a PPC-6601 with the same issue. The platform apparently does not support "audio on demand" over bluetooth. There may be 3rd party software or a bluetooth stack tweak that fixes this but as of yet I have not found one. If it exists it is probably on this site, but I'm still searching.
Hopefully someone will post a fix.
This also causes voicecommand to not work over the bluetooth, which means that a wired headset is far superior to a bluetooth one on these phones. Hopefully it is not a hardware limitation.
good luck to us.
Wes
Its not a limitation... but the device should support AD2P profile... which is not still in there.. will will have to wait for it
Hey guys,
check out PDA2K_BroadcomCorp_BTUpdate.cab on this forum:
http://forum.xda-developers.com/viewtopic.php?t=14329
I believe this adds the AD2P and keyboard profiles to the phone. When I installed it on mine I saw a new profile for bluetooth high quality audio headphones. Unfortunately my bluetooth headset (Logitech mobile freedom) doesn't seem to support AD2P. I was hoping to get low quality audio on demand through the headset, not necessarily high quality audio. My goal is to get microsoft voice command to work over the bluetooth headset speaker and mic.
Let me know if you have any ideas for getting audio on demand over my bluetooth headset, and if you have a good set of bluetooth headphones that support AD2P, the file at the link above should get it working if you have the broadcomm/widcomm bluetooth stack.
Thanks for the link
Thanks for the link, will have to search for the update for PDA2k....
pda2k update
that file should work on any pda using the broadcomm bluetooth stack. it adds the high quality audio profile and keyboard profile.
i am looking for a way to get a headset profile to behave exactly like a wired headset. apparently this is not an option.
is there possibility to use cable headset like BT headset with AVRCP?
BT stereo headset are too big and not cheap.
I would like to control mediaplayer from headset
I do not need A2DP because I need only to listen audiobook, not music, so quality isn't so important.
Mono BT headset (I have jabra130) doesn't work with audio streaming on my Himalaya, and they doesn't support AVRCP profile.
any idea?
AVRCP is a bluetooth profile. If your headset is not bluetooth then it will not have AVRCP.
maybe something similair?
Marx2 said:
maybe something similair?
Click to expand...
Click to collapse
haven't met with any solution so far.. simply these devices haven't anything to control with excpept the radio waves.. it has only jack/etc. with these you cannot control anything.
Some headphones has an additional button which can be used to answer talk. Jack connection has additional place to use it. is it possible to catch pushing this button programmatically?
Well, I just got my stereo bluetooth headset to work with my SX66.....but I can't use the media controls on it (I believe thats called AVRCP).
Is there anything I can do to solve this problem? I'd like to be able to use the media controls on the headset so I don't have to control everything with the SX66.
Same thing here...
I got Jabra BT620s headphones and they sound great with SX66... but only the volume control and start/end call buttons work. Have you found a solution for this?
Thanks
So I have a 8525, very new to it. I am using sleuths latest WM6 ROM. I paired my plantronics bluetooth handsfree which supports both profiles "handsfree and headset" it paired as handsfree and works for calls as expected. But I have yet to figure out a way to pipe all audio to the headset or pair it as a headset. I can pair it as a headset on a PC, but not the 8525. I remember having this issue with my 2125 and having to get some software to allow this, I assumed with all the stereo bluetooth work and that this was a pocket pc and not a smartphone that this was not an issue any more.
I tried searching but so many posts come up for bluetooth headset or handsfree, not having much luck.
Which headset are you using?
I have the plantronics voyager 510, works fine as the handsfree with the phone and sleauth wm6 rom. Just trying to figure out the way to get the headset side to work so I can listen to audio books and podcasts.
I will keep searching, keywords get me results just going to have to keep sifting.
You need a headset with AD2P profile or your gonna need to get some hack to route all bt audio to a mono headset.
Is there such a hack? I have the Plantronics 520 bt headset which works really well with voice, but won't play any music. I've tried all the various cabs from this forum but none has worked. The "wireless stereo" option in the bt settings when I pair it to my 8525 is grayed out ... does this mean that the headset cannot do music at all? Even though I really like this unit, if that's true, I'll need to return it and find one that does.
MrDSL said:
You need a headset with AD2P profile or your gonna need to get some hack to route all bt audio to a mono headset.
Click to expand...
Click to collapse
I'm pretty sure pocket player supports mono bluetooth headsets. Bad thing is it costs $20. Good thing is you can try it free for 30 days to make sure it does work. Or you can goto amazon and pick up the Jabra BT620 headphones for under $40; they work great for me.
I'm using a bluetooth 2.0 stereo headset with my HTC Herald. The problem is that when you press the function key on the headset for a second, it automatically calls the last number dialed. Is there a registry setting or something that can disable this feature in order to prevent making accidental calls?
Also, each time the headset connects, it doesn't automatically set as wireless stereo. I have tried the A2DP Toggle today screen plugin. Although it works, I'm still looking for a way to map the function to a hardware key, without taking up space on the today screen. Any help would be appreciated.
Which headset are you using?
I'm using a Clip II Mini. It's the one they sell on eBay that looks like a 2nd gen iPod Shuffle, and has a 3.5mm stereo jack. With my previous BT 1.2 headset, all I had to do was click one of the controls to activate wireless stereo mode.
BT headset help
I too have a BT headset (Jabra BT135) and only the handsfree profile comes up on the BT menu .. the " set as wireless stereo" is faded out (see attachment) and I can only use it for receiving and speaking on the phone but not for listening to music from wmp... pl help
Thanks
farhanehmudkader said:
I too have a BT headset (Jabra BT135) and only the handsfree profile comes up on the BT menu .. the " set as wireless stereo" is faded out (see attachment) and I can only use it for receiving and speaking on the phone but not for listening to music from wmp... pl help
Thanks
Click to expand...
Click to collapse
'cause it only supports HFP and not AD2P (wireless stereo).
It even say on the Jabra BT135 site.
Try using the latest beta of BatteryStatus and the tray icon to manager the bluetooth functions. Solved all my problems. It makes it a 1 click operation. Just toggle A2DP and it automatically turns on Bluetooth and activates the "Stereo Headset" profile for my headset device.
BatterStatus Extended V. 1.05 Beta nightly build
Thread I used to discuss my issue
As for the auto dialing I haven't encountered it since installing and using the
A2DP toggle on BatteryStatus. Only conflicts I encounter are when I use Audio Manager and WMP and forget to close the process on 1 which is my own fault.
Good Luck