Hi,
I'm writing some software that needs to send data over the internet using GPRS.
The problem we've had in the past is that users of our software would play with the gprs connections settings or fire up the wap browser or something and that would prevent our software from connecting properly.
What I'd like to be able to do is manually connect to gprs from within our program but specify our own settings for GPRS rather than leaving it up to the connection manager.
I've been exploring TAPI and the lineXXXX functions, but I get the feeling this is a dead end....
If it makes a difference, our original software was written for the XDA1 but I'm writing the replacement for the XDA2 and have access to all the new fancy stuff in PPC 2003
Cheers in advance for any help you can give,
M
Thank you for reading this, I really need your help.
Two options: which one below is true or possible?
1- It is possilbe to Connect my Laptop to internet via Dialup connect. on pocketpc phone? and connect my Laptop to pockect pc phone via Bluetooth.
Or should I use the dialup connection on my laptop to connect to internet using Wireless modem on my pocket pc phone?
does this make sense?
I have Siemens SX66.
You must be a mind reader because I was going to ask the same question.
Anyone's help would be greatly appreciated
I've successfully connected my XDAIIs to laptop for internet access.
On USB craddle, you can
1. Laptop connected to internet ( dial up / lan / whatever ) --> XDAIIs sits on craddle and connect to Active sync ---> XDAIIs can access internet
2. Use XDAIIs as the dial up modem via GPRS and your Laptop is able to access internet. This option u will need "HTC HUB" modem driver.
IrDA, you can
1. Use XDAIIs as the "Virtual" dial up modem via GPRS and your Laptop is able to access internet. This option u will need IrCOMM2k for emulating IrDA port on your laptop to see XDAIIs as its modem on its com port.
Bluetooth
This one i never try. I don't have bluetooth on my laptop :-(
As Forum Elders and experts have been saying...PLS TAKE SOMETIME AND EFFORTS TO SEARCH ON THIS FORUM and u will need the desired.
FYI, one can use 2s/2i/mini/Jam/XDA II ...etc as a wireless Modem via USB/Serial/Bluetooth/Irda.
Pls also take efoorts to read the manual which is provided with...
MR2046 said:
On USB craddle, you can
1. Laptop connected to internet ( dial up / lan / whatever ) --> XDAIIs sits on craddle and connect to Active sync ---> XDAIIs can access internet
Click to expand...
Click to collapse
Thank you my friend, This one I already know it.
MR2046 said:
2. Use XDAIIs as the dial up modem via GPRS
Click to expand...
Click to collapse
Yes, --------GPRS -------- I do not like to use GPRS. I want to use my PocketPC Phone number and dial to an ISP using my ISP account.
Can you help me this. I can connect my Laptop to my Pockect PC phone via BlueTooth dialup connection modem (in my pocket pc phone), but how can I connect my pocket pc phone to the internet using ISP dialup modem and not GPRS.
MR2046 said:
IrDA, you can
1. Use XDAIIs as the "Virtual" dial up modem via GPRS and your Laptop is able to access internet. This option u will need IrCOMM2k for emulating IrDA port on your laptop to see XDAIIs as its modem on its com port.
Bluetooth
This one i never try. I don't have bluetooth on my laptop :-(
Click to expand...
Click to collapse
thank you, btw: I WAS ABLE TO open my Laptop and put the USB BT dongle inside my laptop and this way, I have no problem, MY laptop is BT enabled now , if you like that here is a link: http://www3.telus.net/thewitt/BT/
hdubli said:
As Forum Elders and experts have been saying...PLS TAKE SOMETIME AND EFFORTS TO SEARCH ON THIS FORUM and u will need the desired.
FYI, one can use 2s/2i/mini/Jam/XDA II ...etc as a wireless Modem via USB/Serial/Bluetooth/Irda.
Pls also take efoorts to read the manual which is provided with...
Click to expand...
Click to collapse
Thank you my friend, but if you get my previous reply, I want to conneted to the internet using my mobile number by dialing up an ISP account and not GPRS as I HATE GPRS, it is unreasonably expensive.
Can you help on this. I have searched and searched and searched...
Hi there,
Follow the steps below.Kindly note that to access your ISP, your SIM card should have Data Services enabled from your service provider.Also, the dial up number should be PSTN Number....viz nos start from 1 cannot be dialed from a GSM Network.Check thiis with your Network service provider.
1.FIrst of all pair your device with your laptop BT, so that your laptop checks the services which your PDA offers viz Serialport,DUN., Activesync etc...
2.Now, go to Network connections on your Laptop and opt for make a new connection.Just take care that you should opt for Bluetooth Modem while selecting the Modem.Rest all is same as you had done for your ISP.
3.Now, just dial the connection...your phone shd be able to maka a data call.
Pls let me know if you were able to do so...Best Luck
hdubli said:
Hi there,
Follow the steps below.Kindly note that to access your ISP, your SIM card should have Data Services enabled from your service provider.Also, the dial up number should be PSTN Number....viz nos start from 1 cannot be dialed from a GSM Network.Check thiis with your Network service provider.
1.FIrst of all pair your device with your laptop BT, so that your laptop checks the services which your PDA offers viz Serialport,DUN., Activesync etc...
2.Now, go to Network connections on your Laptop and opt for make a new connection.Just take care that you should opt for Bluetooth Modem while selecting the Modem.Rest all is same as you had done for your ISP.
3.Now, just dial the connection...your phone shd be able to maka a data call.
Pls let me know if you were able to do so...Best Luck
Click to expand...
Click to collapse
Thank you hdubli, I will try it and let you.
How about direct dial up to ISP/PSTN from pda phone?
Can we do that?
Imagine, go anywhere only with pda phone.
Yes one can do that For doing so one has to select the "Cellular Line" while making a new connection on phone and input the dial up number provided by service provider..I suggest consult your service provider for doijg this
sherko said:
hdubli said:
As Forum Elders and experts have been saying...PLS TAKE SOMETIME AND EFFORTS TO SEARCH ON THIS FORUM and u will need the desired.
FYI, one can use 2s/2i/mini/Jam/XDA II ...etc as a wireless Modem via USB/Serial/Bluetooth/Irda.
Pls also take efoorts to read the manual which is provided with...
Click to expand...
Click to collapse
Thank you my friend, but if you get my previous reply, I want to conneted to the internet using my mobile number by dialing up an ISP account and not GPRS as I HATE GPRS, it is unreasonably expensive.
Click to expand...
Click to collapse
You can only get up to 9.6kbps dialing up to an ISP account (CSD service, typically USD$9.99/mo). With GPRS you can get at least 28.8kbps... That's why GPRS is more expensive (typically USD$19.99/mo)...
Now unless you plan to just browse gopher sites (gopher://quux.org/)... I don't think CSD is worth the trouble...
Can you help on this. I have searched and searched and searched...
Click to expand...
Click to collapse
GPRS is fine, but expensive in the UK. It is £2.35 per MB with an 02 monthly contract. Unless you get an 02 Pay As You Go SIM and 'bolt on' 02 Active5. It's £4 for 5mb.
If you use simple old fashioned dialup PSTN/ISDN you can use (for example) a free 0845 dialup (UK2.net) and use your bundled minutes instead.
OK it's slower, but I just want email headers and have over 800 minutes rolled over this month!!
Rich
Hello, im fairly new to these forums and have upgraded my 8525 to the 20070408_RUU_Hermes_WWE_3.24.0.4 wm6 rom. I've also installed the cingular WAP MediaNet MMS Settingsv2.cab to get the cingular settings back. My problem is that my 8525 does not automatically connect to gprs like it used to on wm5. To enable gprs i must go on internet explorer and force it to open gprs. Is there a setting i must go to set it to automatically connect to gprs upon start up? thanks in advance.
limpfalife said:
Hello, im fairly new to these forums and have upgraded my 8525 to the 20070408_RUU_Hermes_WWE_3.24.0.4 wm6 rom. I've also installed the cingular WAP MediaNet MMS Settingsv2.cab to get the cingular settings back. My problem is that my 8525 does not automatically connect to gprs like it used to on wm5. To enable gprs i must go on internet explorer and force it to open gprs. Is there a setting i must go to set it to automatically connect to gprs upon start up? thanks in advance.
Click to expand...
Click to collapse
download HTweakC, and goto GPRS/G3 Tweaks, and check the "set connection AlwaysOn"
http://www.fit4cat.de/thread.php?threadid=263
thanks it fixed my problem. Greatly Appreciated.
Hi, I will use Wlan to go online and not gprs, is there a tool to deactivate gprs permanently on Windows Mobile 6 ?
greets
well i don't know about permanent deactivation,
if i didn't want to use GPRS ever,
I'd probably just delete my access point name from the settings or something...
...or have you tried MoDaCo_NoData.CAB
http://www.modaco.com/FREE-Utility-t246171.html
Edit - just saw something in the Elf forum;
NOGPRS.zip
http://forum.xda-developers.com/showthread.php?p=1550802#post1550802
Accessing & Using the internet via USB
I have an unlocked HTC S620 & TyTN (Hermes).
When I connect the TyTN to the USB I am able to browse the internet as the phone uses the PC as a gateway automatically.Even if I do not setup a profile for activesync and the software recognises the device as "Guest". I am ceretain that this is the case and not accessing the service via the carrier or WiFi as I have enabled flight mode and been able to use the internet on the TyTN, browsing, using IM+ Mobile Mesenger etc.
I do not find the same functionality with the HTC S620 (T-Mobile Dash). Does anyone know how to get this functionality going?
Usually you always need to make a partnership for internet pass through to work. Strange you don't with the Hermes.
indiekiduk said:
Usually you always need to make a partnership for internet pass through to work. Strange you don't with the Hermes.
Click to expand...
Click to collapse
When you say partnership I asume you mean bluetooth.
I Turned on Flight mode and diabled bluetooth on the TyTN, connected it to the PC. Activesync came on and I cancelled setting up a profile so it was registered as guest. I got internet access via the usb cable connected to the PC. The same is not working for the S620.
I guess the distinction between the two is the TyTN is a Pocket PC and the S620 is a smartphone. There are various Ethernet Miniport Cards available for configuration on the TyTN. You find these under Settings>>NetworkCard>>Network Adapters. The one I find that shows up as connected is IEEE 802.11b/g Compatible Wifi Adapter, this I find strange as the device is in flight mode. The S620 does not have all the features and configurable network adapters under settings. Simply put a smartphone will not have all the networking capability of the Pocket PC
Let me know your thoughts please, or if you have another solution.
Here is how I got mine working.
1) Connect phone to pc.
2) Make sure ActiveSync shows connected.
3) Under ActiveSync Window select File->Connection Settings...
4) Change the "This computer is connected to:" setting from "Automatic" to "The Internet".
5) Under you phone go to IE -> Menu -> Tools -> Options -> Connections and make sure "Automatically detect settings" is enabled.
That's it. You should now be able to browse the internet through your pc connection.
Forgot to mention I am using ActiveSync ver 4.5.
Dash Internet Sharing Files on S720
On my HTC S720, there was no Internet Sharing option, even though it is WM6 unit. So after reading lots of threads on here and hofo, found out Blackjack had similar issue, as well as some WM5 devices running AKU 3 or higher.
So I copied intshrui.exe, intshare.dll and intshrui.lnk from Dash WM6 Rom dump, created relevant registry entries as:
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\intshruiapp]
[HKEY_CLASSES_ROOT\intshruiapp\DefaultIcon]
@="tapres.dll,-14294"
[HKEY_CLASSES_ROOT\intshruiapp\SelectIcon]
@="tapres.dll,-14295"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\Rai\:MSINTERNET_SHARING]
"0"="MSINTERNET_SHARING"
"1"="IntShrUI.exe"
"2"=dword:00000001
"3"=dword:00000000
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\Rai\:MSINTERNET_SHARING\Session]
@=hex:00,db,4d,43,70,b9,c7,01
Then run intshrui.exe and while I can connect via Bluetooth PAN, I couldn't get any IP. I also tried a static IP and that didn't work as well. I investigated a little more, and found another key:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\Comm\ConnectionSharing]
"DisabledOnBoot"=dword:00000001
"EnableAddressTranslation"=dword:00000001
"EnableDhcpAllocator"=dword:00000001
"EnableDnsProxy"=dword:00000001
"EnablePacketFiltering"=dword:00000001
"PrivateInterface"=""
"PublicInterface"=""
"SetLastDhcpAddrToIEH"=dword:00000001
[HKEY_LOCAL_MACHINE\Comm\ConnectionSharing\Driver]
"Dll"="ipnat.dll"
"Flags"=dword:00000002
"Index"=dword:00000000
"Prefix"="NAT"
Then I copied ipnat.dll to s720. Here is the interesting part. If HKEY_LOCAL_MACHINE\Comm\ConnectionSharing exists, intshrui.exe will not connect, it will briefly grey out and come back to disconnected mode. As soon as I delete the key, it will setup USB or BT PAN and wait for connection (left soft key turns to Disconnect). I don't even have to reset the unit while making change to this key. Also, I left the HKEY_LOCAL_MACHINE\Comm\ConnectionSharing as empty, and noticed as soon as I run intshrui.exe, it will populate
"PrivateInterface"=""
"PublicInterface"=""
keys under ConnectionSharing key. I also tried to change various reg keys, such as HKEY_LOCAL_MACHINE\Comm\Tcpip\Parms\IpEnableRouter to 1, and
[HKEY_LOCAL_MACHINE\System\State\Connectivity]
"InternetSharing"=dword:00000001
None helped as well.
Am I missing a file or reg key to make this work? I looked on my Dash for various keys/files but didn't see anything useful.
has anyone figure out how to get internet sharing on wm6?
Have a look at;
http://forum.xda-developers.com/showthread.php?p=1517183&posted=1#post1517183
I posted up the files and a .reg file taken from my WM6 Dopod 838, but I don't know if everything required is there. If anyone knows what else is required I'm happy to copy it from my device and post it here.
Would you mind posting ipnat.dll - it is missing from Blackjack II WM6..
Internet Sharing kavana's 080308
does anyone have a problem with Internet sharing?
Bluetooth PAN and USB sharing dosnt work for me with kavana's 080308 rom
and remade wm6.1 kavana's 080308.
Before I never had any problem with T-mobile, russian, rodger, HTC.....
skf said:
does anyone have a problem with Internet sharing?
Bluetooth PAN and USB sharing dosnt work for me with kavana's 080308 rom
and remade wm6.1 kavana's 080308.
Before I never had any problem with T-mobile, russian, rodger, HTC.....
Click to expand...
Click to collapse
I have fix this problem,and update XIP and SYS to 19202,i'll upload the new version later,just wait...
Thank you. I wait for new version .
btw With your rom I able to install and USE tomtom ,
with T-mobile Windows Mobile 6, I get incompatible with tomtom navigator arror.
http://forum.xda-developers.com/showthread.php?t=364685&highlight=tomtom
What's new in 080312:
Update to new kernel
Full English version
Fix Internet Sharing ----do not work for me ;(
6.1 Internet Sharing Problem *R.I.P.*
Has anyone figured out why Internet sharing NO LONGER works with any 6.1 roms that i flashed to? From Kavanas ROM s to Ricky's Remakes.
Is there a fix to this?
Can any of you "smarter" Gents or Ladies, look into this.
this is wierd. who is your operator? mine works just fine with the settings i use. maybe we should find out if this problem only exist for certain operators. might also have to do with the network connections on the pc. like i said in another post, i noticed a new network connection appears when you sync the phone, unlike in wm6.0. another thing is i would have problems with activesync everytime i flashed to a new rom without doing a uninstall & reinstall of activesync.
Se7eN43 said:
this is wierd. who is your operator? mine works just fine with the settings i use. maybe we should find out if this problem only exist for certain operators.
Click to expand...
Click to collapse
Shouldn't be operator issue. Worked great prior to updating to 6.1. (T-Mobile USA)
What rom are you using?
damn u were quick to respond. i edited my first post. im usin the new v15 rom. and tmobile is my operator.
ediit: i just messed with my settings and went back to how i had them before and now its not letting me do the internet share. hmm... this is not cool
Iv used V14, V8 and V5 and none of them allow my internet sharing to work. V5 worked at first but then stopped.
I really like 6.1 but I NEED that internet sharing
WHAT settings are talking of? that work for you?
INTERNET VIA USB PROBLEM SOLVED!!!!
ok i think the problem may be with activesync. like i said, in my second post edited, i had messed with the advance settings of connections menu, and reverted back and it stopped net sharin via usb. i noticed activesync gave me an error sayin somethin about not being able to fully connect but i was still able to browse my phone, also giving me a constant animation of the activesync icon, saying "connecting" never stopping when a full connection is establish. when i fixed this and the icon stopped turning and said "connected" i tried and it worked.
on a fresh install of the past couple of roms, this is what i did... (from an earlier post of mine)
this is what i did. use the "connection setup" in the accessories folder. choose country & operator. dont think it matters but i also selected "Enable Auto Configuration" under the menu.
in explorer, under "menu/tools/options/connections" Auto.Detect Settings is selected. under "Select Network" choose The Internet.
now go into ur phones "Connection" settings, select "GPRS". in my case, select, "T-Mobile WModem Link", under "Connects to", select The Internet. for other operators, guess look for somethin similar. now u should be able to share via usb.
one thing u might have to do is, delete whatever gprs settings u have now and power off and back on. then do the above.
sorry if this is so messy looking
Can you post the entry "seetings" for "T-Mobile WModem Link"
I manually entered my connections.
So i dont have the modem link