Related
The following applications do not work with this version:
SlingPlayer for WM5 smartphone (Can't connect)
Tornado PowerControl (OMAP errors out)
What applications don't work for you?
-TXTman can't capture sms
-AE Button Plus broke "end call" key when i remapped it to end programs
-Replacing IE_Short.lnk with task manager command causes internet explorer to open simultaneously with task manager
yeah no threaded sms programs will catch the messages. that's my only gripe right now.
So far, Blackberry Connect does not work on mine It was a major application for me, if anyone knows how to work around it in the Registry
aauspitz said:
So far, Blackberry Connect does not work on mine It was a major application for me, if anyone knows how to work around it in the Registry
Click to expand...
Click to collapse
What part of it isn't working for you? I managed to get it loaded and connected to the network. No emails seem to be coming through for me though
J
countfloyd said:
What part of it isn't working for you? I managed to get it loaded and connected to the network. No emails seem to be coming through for me though
J
Click to expand...
Click to collapse
I've run an Application Unlock on my S620 and I've managed to install Blackberry Connect but, like you, not getting any mail.
I've given up and gone back to the German WM5 rom. After a couple restarts of the device, the blackberry connet top banner doesn't even show up on homescreen anymore!
I'll wait till rim gets their act together on WM6.
J
Hmm...I am going to give this another try.
I realized that I couldn't get emails on my device, even after putting the WM5 rom back on, because I hadn't sent a "service book" from rim's blackberry site. That did the trick. Gonna, reload WM6 and give it a shot!
J
Bah, no luck getting this thing to connect or run reliably let alone get emails...
how do i go back to my original .. windows mobile 5...
if anyone is using WM6 on the Dash...
could you please tell me if they fixed the bug that automatically changes your profile to "headset" when you connect a bluetooth handsfree headset.
and if it does change it to "headset" automatically could you please tell me if you are able to change your profile to "normal" while the bluetooth headset is still connected
Thanks in advance
streetx613 said:
could you please tell me if they fixed the bug that automatically changes your profile to "headset" when you connect a bluetooth handsfree headset.
Click to expand...
Click to collapse
Someone would have to consider that a bug first. I think more than 99% of the people using a bluetooth headset would want the phone to switch to headset profile automatically. Call me silly, but...
-Mc
McHale said:
Someone would have to consider that a bug first. I think more than 99% of the people using a bluetooth headset would want the phone to switch to headset profile automatically. Call me silly, but...
-Mc
Click to expand...
Click to collapse
well yeah it would seem that way but when i have my bluetooth headset connected... sometimes i want my phone on silent/vibrate and other times i want it to play sounds, and i hate having to go and edit the headset profile manually to do this, just changing the profile would be a lot more convenient.
I use my wired headset to play music then set the profile to normal.
Does this not work the same way when using a BT headset?
-Mc
McHale said:
I use my wired headset to play music then set the profile to normal.
Does this not work the same way when using a BT headset?
-Mc
Click to expand...
Click to collapse
no for bluetooth, you can't change your profile unless you disconnect the headset
I noticed that none of the MSN pre-installed software that was part of WM5(MSN IM, Hotmail access, etc) is on this version. When I attempt to set up my messaging to receive hotmail, I get an error stating: "could not find pmsnlauncher". I've looked around and found a download of the pocketMSN software, but it must be 'activated' for ~$20. It does mention (msn website), however, that if the software is 'pre-installed' no activation is necessary. This leads me to believe that the MSN software is simply not part of the BETA rom.
Anyone else notice this? Any thoughts?
msn is now windows live.
jromney said:
The following applications do not work with this version:
SlingPlayer for WM5 smartphone (Can't connect)
Tornado PowerControl (OMAP errors out)
What applications don't work for you?
Click to expand...
Click to collapse
uhhh... tpc works just fine for me... i'm using 2.0 beta 4 of tpc, but other versions should probably work as well. make sure your phone is completely app unlocked, or you will have problems. that includes the 0000101b policy entry in the registry.
i'm the creator of tpc, so if you have questions about it feel free to message me.
does "right menu" work on WM6?
Sling player works with WM6 beta
jromney said:
The following applications do not work with this version:
SlingPlayer for WM5 smartphone (Can't connect)
Tornado PowerControl (OMAP errors out)
What applications don't work for you?
Click to expand...
Click to collapse
I found this over at the sling community forum. I can confirm that it Sling player mobile is now working with the install of the DLL only cab auto install.
Use the link below and go to the March 10, 2007 post by wpbear.
http://www.slingcommunity.com/forum/thread/18903/Windows-Mobile-6.0-incompatible/
Having installed TOMTOM6 on my HTC-3300 (t-Mob branded) I am looking for a way to route TOMTOM traffic messages thru my bluetooth carkit.
Obviously the phone calls go through fine, but afaik all the pda apps. sounds only run thru the mda's speaker.
Does anyone know a workaround or reg. tweak to do this?, I can't immagine I am the only one who would be looking for such functionality.....unless everybody else uses the gps function only 4 walking
Help much appreciated,
Frans
If your car kit supports the A2DP profile for Audio over Bluetooth and you select the option to use it all the audio from TomTom will be via the car kit, check what your car kit is capable of supporting - Mike
vriesfde said:
Having installed TOMTOM6 on my HTC-3300 (t-Mob branded) I am looking for a way to route TOMTOM traffic messages thru my bluetooth carkit.
Obviously the phone calls go through fine, but afaik all the pda apps. sounds only run thru the mda's speaker.
Does anyone know a workaround or reg. tweak to do this?, I can't immagine I am the only one who would be looking for such functionality.....unless everybody else uses the gps function only 4 walking
Help much appreciated,
Frans
Click to expand...
Click to collapse
I'm using btaudio
greetz
Thanks for the tips!
My Nokia carkit does not support A2DP, it's the old CK-7W type....
I will try the above attached btaudio once more. Previous attempts using this program were not succesful, I believe the bt hardware of the artemis was not recognized.
I remember that on my IPAQ 5550 I changed a registry setting, enabling audio over BT, but I could not find such an entry in the Artemis reg.
Keep you posted on progress, and thanks sofar!
Succes!
Just tried btaudio, attached by hotatomic, and it works!!!!
Haven't tried what happens if I get an incoming call yet, but the sound for TT6 is much better using the Nokia handsfree.
Thanks!!!
Hi guys,
I'm a newbie here, and was pointed to your excellent forum from one of the Mods over at pocketgpsworld.com.
I am running copilot 6 on an O2-registered xda Orbit, using a scala rider headset, on my motorbike, and i need to install btaudio.cab to mt xda in order for the insturctions to be relayed to my earpiece. My question is this - whereabouts to do i need to upload the file to on my xda (obviously somewhere in the copilot files, but i'm not sure where!!) and do i need to unpack it first?
Any help or tips gratefully recieved!!
Welsh Biker
No transfer the cab file directly to the orbit, (storage card is usually the best place to put them).
Then in file explorer, double click the .cab file to run it and it will install the application.
It's a separate application to Copilot.
vriesfde said:
Just tried btaudio, attached by hotatomic, and it works!!!!
Haven't tried what happens if I get an incoming call yet, but the sound for TT6 is much better using the Nokia handsfree.
Thanks!!!
Click to expand...
Click to collapse
Graag gedaan
Your welcome and when a call comes in it work ok
Gajet said:
No transfer the cab file directly to the orbit, (storage card is usually the best place to put them).
Then in file explorer, double click the .cab file to run it and it will install the application.
It's a separate application to Copilot.
Click to expand...
Click to collapse
That's brilliant, many thanks. I did as you said, and it is now working perfectly.
Once again, many thanks indeed
Welsh Biker
i have a orbit and i installed the btaudio cab but unfortunately it doesnt work for me. do i need to change any other setting for it to work properly? i am using a motorola hs350 headset. i am trying to use it to listen to music on my headset instead of the internal speaker. i tested tomtom6 with it and that is still being heard on the speaker and not the headset. thanks
Connect the headset to the Artemis first, then run BTAudio, switch to "on" and then minimize don't exit the program.
Have you got software that closes apps by pressing the x button or something, so that you keep switching the app off when activating tomtom etc.
how silly of me, checked settings menu, connections menu everything except the program menu!!!
Thanks a lot mate
Hi,
I seem to be having the same problem as some of the other guys. The Bt software is installed on my Orbit, I pair the phone with my car then switch the software on. At this stage the TomTom voice stops coming from the phone but doesn't come through the handfree either. If I switch the software off again the sound returns to the phone.
Is this being caused by the format of the handfree kit in my car as mentioned on the first page of this post?? How would I positively confirm the format of my handsfree kit?
Cheers
Rob.
i try to install and it works, but when i turn on audio my radio goes in mute, is possible to send the sound only when tomtom talk?
Hi all
I also need help with audio features. Is there an app that will send all audio through the head phone socket (connected to autocom on motorbike) and phone calls through bluetooth have tryed the app in this tread but it wont split it only redirects all audio?
PS sorry for the high jack of your thread just seemed a good place to ask this.
I've been struggling for several months now to get my MDAC III working with my built-in car Bluetooth hands-free. The full details are below, but in short, I'm told that the system seems to work OK with Wizard, and I'm wondering what about the Wizard could be different to the Artemis (Bluetooth stack perhaps?), and if there is a difference, is there anything I can do about it?
The full issue: The system I'm trying to connect with is in a Land Rover Freelander 2 (LR2 in the US) Initial pairing was a bit hit and miss, but now I've got the the phone paired with the PTI, that's not a problem and they automatically pair whenever I start the car.
I can succesfully initiate or answer a call from the car, but the call itself isn't routed through the car's speakers/mic, it just goes through the phone as normal. However, once in a call if I select the "privacy" option on the PTI (which would normally have the effect I've already got of passing the call to the phone), and then select the "hands free" option, it does what it should and routes the call through the car. Effectively, it's as if the system starts in "privacy" mode rather than "hands free". Once I've done this once, subsequent calls work fine, routing straight through the car, but only until the ignition's turned off. The next time I start the car up I'm still paired, but calls go through the phone again.
If anyone's got any suggestions, I'd really appreciate them.
Thanks!
Try this
Had similar in a BMW...
Try www.jetwaremobile.com
Thanks, did try that but didn't seem to help, it seemed to be more geared towards additional functions like phonebook syncing rather than just getting a working connection in the first place. Maybe I'll give it another go.
Same Probleme On 207
hi,
I have the same ....
I precise that work fine with the original m650 rom, i search many hours but i found nothing, i try bluetooth toggle with no effect...
please help us !
thank for dev for everything they do !
RE
I try many combinaison so:
if i want to use my bt car kit, i'm forced to validate hands free option at every phone call...
I think it's btaudiotoggle the cause of mly problem, he is included in the aje rom...
you think it's possible ?
TangerineTractor said:
Had similar in a BMW...
Try www.jetwaremobile.com
Click to expand...
Click to collapse
Thanks TangerineTractor!
I fixed the problem I have with car kit of OPEL ANTARA using the software you said. It works disable sending Phonebooks.
I am having a similar problem with Wizard Mobile 6 cooked ROM. Before with the official O2 ROM on my Xda Mini S, it worked fine. The car would automatically recognise the phone whenever in proximity, and all calls would go through the speaker.
Now, I have to press the car kit's button (Nokia Bluetooth) each time I get in the car, to tell it to search for devices - i.e. the phone doesn't automatically announce its presence.
So, is there a different Bluetooth Stack we can try?
My Orbit works fine with my Nokia CK-7W using a B&B ROM.
Thanks, and yep that's the same car kit I have.
When you get in the car, do you have to do anything, or does the car kit automatically detect the phone? Mine doesn't since getting the Wizard Mobile 6 cooked ROM.
Do you know what Bluetooth Stack you use, and if I can download it anywhere for the Wizard?
No, just switch on the ignition key and away it goes. Also if the car kit is set as the default hands free if the phone rings it should try to connect to the car kit.
The radio I am using is 2.95.90 I have no idea what bluetooth stack it is, Tom Codin cooked the ROM, he will know.
Okay thanks. Does anyone know if the BT Stack is part of the Radio ROM? If so I'll just try a different Radio ROM.
Looking for a way to hit the mic button on the wired headset that comes with the TyTn to dial a number with a voice tag. I am using the leaked official WM6 rom which has the cyberon voice dialer working. What I haven't been able to do is launch the voice dial using the button on the mike. Even AE button mapper cannot pick it up as a button to be configured.
To do my homework, I searched using 8525, headset button, config, etc. but a) I got hits for other phones (ba, etc) and b) got a lot of posts on how to set up bluetooth phones, which doesn't apply in this situation. I found this cab ba_wm5_voice_dialer.zip but it didn't install complaining about insufficient rights, which I had never seen on a pocket pc. Maybe because it's for WM5.
Any help or links to previous threads on this would be appreciated. Right now, I have to take the phone out of my pocket to dial, which kind of defeats the purpose. Many thanks in advance.
I have no idea whether this helps or not but I remember this as a big topic on the Wizard when it first came out and there was this post http://forum.xda-developers.com/sho...highlight=voice+dial+headset+mic+button+wired I'd be interested to know if you get anywhere
Well, I tried those - thanks for the link. I get no feedback after I run the program whatsoever, so I guess it doesn't work. It does run though, since if you run it twice, it gives you energy levels- that much works, but the rest doesn't seem to.
I'm surprised dialing with the wired headset isn't supported out of the box since it's a part of the package, but oh well. I hope someone else has heard of something about this for the tytn.
Has anyone had any luck with using their Hermes in a Ford, using their 'Advanced Bluetooth' car kit?
I have paired my MDA Vario II, running Schaps 3.60 WM6, with my new Ford Focus. This shows up as 'Ford Audio' on my phone. Incoming calls are now routed through the car stereo, and I can access my voice tags for outgoing calls by saying 'Mobile, Name'. So far so good!
The issue though, is with the Sim Access Protocol (SAP) routine. I have managed to access the phone contacts list just once, and that was after a wait of over 30 mins. I have never seen the list of recent or dialled calls. So all incoming calls show as just raw numbers, rather than names.
I have ensured that I transferred my main contacts to my Sim Card. I made sure that SAP was selected. I even downloaded and installed the Jetware SAP enhancement program. All to no avail.
Has anyone got SAP running, speedily, with a car kit?
Dont kno how much use this is going to be, but try using the rom Black Majic by JasJamming.
That is the only rom ive ever got to work properly with my Parrot 3200LS Car Kit.
I have a Focus ST with the advanced bluetooth car kit and have been able to access my contacts list when using Sleuth's ROM - but not the recent call list etc. I did not need to move my contacts to the SIM to get that though.
I've recently switched to FunKey's 3.62 ROM and while the car kit works for audio etc. I no longer get the contacts - having said that I haven't installed the BT SAP cab so no real surprises there.
To be honest I'm just glad the car kit works for audio - I've always had problems with the Tytn and car kits so it's very nice that it works at all
Thanks, jaso2005 and forza, for your comments. I think that WM6 has got a way to go to catch up even with Symbian, as far as car kits and SAP is concerned.
From your posts, it would seem that some ROMs are getting there.
I see that Shap's latest (4.00 Beta 2) contains the latest SAP utility and, as I am running his 3.60 ROM at the moment, I think I will wait for the 4.00 final release.
Schaps is just requesting people try his new beta ROM that has this feature.
Just throught I would add my name to the list of people having problems getting their Hermes to work with their Ford bluetooth carkit....
I've got my new s-max, but have not been able to get the phone work work with it. I can discover the car from the phone (ford audio) and pair it up. However, when I go to make a call, the phone does not think there is a carkit present. Also, if I go to the carkit setting on the ford computer it says it can't see a phone connected.
Hissing Syd & Forza, did you do anything special to get yours to work with the advance bluetooth? I've tried a couple of different ROMs and am now running Schaps 3.6a (have also tried 4)
thx
caspartfg said:
Just throught I would add my name to the list of people having problems getting their Hermes to work with their Ford bluetooth carkit....
I've got my new s-max, but have not been able to get the phone work work with it. I can discover the car from the phone (ford audio) and pair it up. However, when I go to make a call, the phone does not think there is a carkit present. Also, if I go to the carkit setting on the ford computer it says it can't see a phone connected.
Hissing Syd & Forza, did you do anything special to get yours to work with the advance bluetooth? I've tried a couple of different ROMs and am now running Schaps 3.6a (have also tried 4)
thx
Click to expand...
Click to collapse
I had the same problem with mine initially. The handbook says that you merely have to pair the phone, which you have done. Not true - you have to physicaly make your Hermes the 'Active Phone'. First, select Phone. Then press Menu. Then scroll to Select Active Phone, let it find your Hermes, select it, and it should work.
The selection of Active Phone is covered later in the handbook. It should be at the start.
Good luck!
Syd,
you'll love this, but the dealer forgot to put the bluetooth manual in the glove box. (I'm waiting for it come come through...) In the mean time, any chance of giving me some instructions on how to setup an active phone?
Thx
caspartfg - Have you activated the Bluetooth SAP?
In Schaps latest rom's 3.60a and 4.00 Beta this is in Programs > System Tools > SAP Settings
yes, I have tried with the SAP setting turned on and off. The problem I have is that the car cannot see the phone, even though it is paired.
Also, the phone does not attempt to make use of the handsfree when I make a call.
Thank you all for your suggested
C.
Make sure you have ticked the option to make the phone discoverable (Start/Settings/Connections/Bluetooth - Mode tab; "Make this device visible to other devices")
Hissing Syd is spot on - you do have to select it after the pairing. When I do mine, I delete any existing pairings on both the car and the phone. Soft reset the phone, turn the car radio off and then on. Then (with the radio switched on) search for bluetooth devices on the phone, pair with the "Ford Audio" service. Turn the radio off and then on, press Phone, press Menu, scroll to Select Active phone and press the centre button on Phone1. It can take a few minutes to finally pair up, but it does get there in the end!
I've turned on SAP on the FunKey ROM but still don't get contacts etc. coming through on the car kit - but as I said I'm not that bothered to be honest!
caspartfg said:
yes, I have tried with the SAP setting turned on and off. The problem I have is that the car cannot see the phone, even though it is paired.
Also, the phone does not attempt to make use of the handsfree when I make a call.
Thank you all for your suggested
C.
Click to expand...
Click to collapse
Thank all, just to let you know the phone is working with the carkit.
I've been able to make / receive calls. I have also been able to browse the contact list on my phone via the info on my convers+ dash. Also when calls come in, they show the name of the caller.
I'll do some more testing when I get the manual through, but all of the functions the carkit provides seem to be supported. I've also been able to make voice dialiing features of the car..
I love the fact you can talk to the ford and instruct it around the phone, radio, climate control, etc....... feels like a middle age version of knight rider.....
Thx all
C.
Having the same problem with an Orbit (Artemis)
caspartfg,
I'm having exactly the same problem with my Artiemis - have put something in that Forum but no reply yet
http://forum.xda-developers.com/showthread.php?t=340609
Also - what Bluetooth manual ! The standard mondeo manual has some info but not much. Am I missing the bluetooth manual as well?
jftilbury,
Took quite a bit of fiddling around, but got there in the end....
Which head-unit do you have? - Mine is the Sony version that comes with the new s-max titanium.
To answer your specific questions:
1) yes, there was a separate bluetooth manual. I had to ring the dealer and he posted me a copy
2) The thing the car manual didn't tell me about was that there is a second step to the pairing of the phone in which you need to active the phone in the head unit.
i) make sure the phone is discoverable in bluetooth
ii) pair the phone with head unit as you described above.
iii) select the phone setting on the head unit
iv) press 'menu' (I think) and then in one of the options you can set the phone to active
after that, it all worked a treat for me..... Let me know if this works for you. If my instructions are dodgy, I'll double check
Spot on !
Excellent, that worked a treat. I also have the Sony CD unit, but in the Mondeo, and it is now phoning anyone that will pick up the phone.
The phone book is now going across OK. My problem is that as my company's entire phone book gets sync'ed onto the XDA I now have around 500 numbers on the car menu making it unusable. Never mind, the phone works which is the main thing.
Voice recognition next...
Thanks for your help, I'll point the other thread here as well.
jftilbury said:
Excellent, that worked a treat. I also have the Sony CD unit, but in the Mondeo, and it is now phoning anyone that will pick up the phone.
The phone book is now going across OK. My problem is that as my company's entire phone book gets sync'ed onto the XDA I now have around 500 numbers on the car menu making it unusable. Never mind, the phone works which is the main thing.
Voice recognition next...
Thanks for your help, I'll point the other thread here as well.
Click to expand...
Click to collapse
I'm pleased that we helped solve your problem. My question to you, which ROM are you using? I still have problems with uploading the phone book to the Sony unit with my Schaps 3.60a ROM.
ROM version
I am using the standard ROM downloaded from the O2 support site at:
http://xda.o2.co.uk/xdaOrbitSoftware.html
This sends the download to the HTC site, with the file name:
RUU_Artemis_O2_UK_3.4.206.2_4.1.13.28_02.67.90_Ship.exe
The numbers I can find are:
CE OS 5.2.1238 (Build 17745.0.2.3)
ROM version: 3.4.206.2 WWE
ROM date: 4/18/07
Radio version: 02.67.90
Protocol version: 4.1.13.28
ExtROM 3.4.206.101
Not sure if this helps as it is for the Artemis.
Hissing Syd said:
I'm pleased that we helped solve your problem. My question to you, which ROM are you using? I still have problems with uploading the phone book to the Sony unit with my Schaps 3.60a ROM.
Click to expand...
Click to collapse
I am using Schaps 3.6a... The extra piece I did was to go into the advanced config, bluetooth tab and turn on OBEX. You should also make sure Remote SIM access is turned on in the SAP application.
Hope this helps, worked for me......
C.
Mine in fact worked too well - sending across all 500 numbers my company sync's onto my handset, making the phonebook unusable on the car.
However a Ford forum put me onto this bit of code:
http://www.jetwaremobile.com/
which does exactly what I want allowing me to create a category of people I want to appear in the car phonebook and away we go.
caspartfg said:
I am using Schaps 3.6a... The extra piece I did was to go into the advanced config, bluetooth tab and turn on OBEX. You should also make sure Remote SIM access is turned on in the SAP application.
Hope this helps, worked for me......
C.
Click to expand...
Click to collapse
Thanks very much for that crucial bit of info. Since I started this thread, I have changed ROM to RUU_Hermes_TMO_UK_3.60.110.4_6275_1.50.00.00_108_Ship.exe and, by enabling OBEX, it all works a treat.