ok help please.
i enable my handsfree bluetooth, the symbol appears (the little headset) then the notification bubble appears, click it and the message about handsfree shows, click hide, wait about 2 seconds the handsfree symbol dissapears and the notification bubble comes up again, click it pops up click hide and repeat,
anyone ideas? why does it do this? how i can i stop it
i have the bt manager open and it doesnt show the handsfree to be dropping the connection (the green triangles are there the whole time)
many thanks
Dagaz
Related
Hi,
It seems that my PAMA Plug N Go4 headset just works in one direction: when I make a call it is transfered to the headset, but I can't disconnect using the headset buttons. Incoming calls can only be answered when I press my XDA green button, and they are not transfered to the headset (though the headset does give a ringing tone). Anyone has any idea why this is happening ? Pairing was ok, and done via the setup directions in the manual.
simple tweak
by my experince, the following tweak may help u solve this problem.
1. make sure u must see the "headphone" symbol after turnon the bluetooth function, that's mean ur bt device is well connected with your xda;
2. keep the "bluetooth manager" still running in background or in front.
hope this can help u solve ur rpoblem :wink:
Bi-directional OK now, but Bluetooth Tools 1.1 cause problem
If I wait long enough before picking up the call, it seems to transfer.
But now I have another problem: I've installed Bluetooth tools 1.1.0 and when I try to bond, after entering the passcode and hit next , it returns always back to the passcode screen. No way to bond :-(
somtimes when I try to bond, XDA gives me a message that the PAMA wants to bond, which I accept and enter the passcode. Everyhting seems ok, but it does not pass the call to the headset. Anyone any clue ?
Hi,
Is there any hack/option/software to change the softkey(s) when the phone is ringing? ive tried a search but the utils seem to cover the softkeys during idle time.
My actual problem is, the Oribt is docked in the brodit holder running Tomtom, incoming call brings the notification window to the top, with the option to answer or reject - and return to tomtom.
But.. if the phone is 'keylocked' - as tomtom is now on top (after the call is answered) again there seems to be no way (without exiting tomtom) to get back to the today screen to unlock the lock, to then get to the speaker button - All a bit of a hassle when driving!!!
So what im looking for it to change the 'Answer' softkey to Answer on Speaker
Phonealarm will somewhat allow this through profiles, but i'll never remember to change profiles each time im in the car!!
Any Ideas anyone?
Bump.
Any Ideas anyone?
Unfortunately no solution, but as I have the same problem I will risk a small kick
--EDIT--
And a small search in the manual gave me this answer:
During a call, tap Speaker On, or press and
hold TALK until the speakerphone turns on. The
speakerphone icon ( ) appears in the title bar.
Now see if it works during TOMTOM operation
I am using an 8125 with Slide2Unlock and the Iphone dialer pad. Even with the standard dialer phone pad, if I want to stop using the headset during a call I must use the menu button at the bottom and select "Turn Hands-free off".. There are times that I do not want to use my BT headset or vehicle hands free unit. I would like to know if anyone had extracted that command and if it could be placed on the "in call" dialer skin as a hot button, like hold or mute, without having to go through the menu to access it. I don't need anything fancy that toggles the bluetooth on/off, in fact I would like to leave that unaffected. Simply a command that shortens the finger strokes of going through the in call menu and setting the handfree status.
Thanks in advance to brain tank.....
Does anybody have any ideas????? Please would really like an app like this....
Please Please...really want an app like this but I have no idea how to make one.
Thanks
have you tried holding down the green call button whilst in a call? Works on my SPV M1000 to turn speaker phone on....
A
Speaker phone is not my issue, I want to toggle between Headset and Handset while in a call. Like pressing menu/Handfree off.
GC
I tested a today plug-in which did it, unfortunately I don't remember the name. AFAIK it is the only software capable of doing it while in a call, so.... hope you'll find it
I cant find my booklet for my Kyocera TXCKT10129 Bluetooth Dongle. Which has the setup instructions and key for setup. (ie, what key to press, in what order, what the security code is ect..)
Ive run Google though its paces but their is very little available on this device. Let alone a manual. After I put a cooked rom on my phone, i of course lost the association with my phone. Now i cannot get it re-associated. Can anyone help me find the manual online someplace or have one of these personally? .... before i kill someone...
Just for some help this is about the only link i could find.. which is where i purchased it from.
Woot Link
As usual, i found a manual after posting here....
Kyocera Instructions and Specs.
< How to Use >
Please use Ear-Call after fully charging a power if the key does not become ON since through the distribution channel the battery power can be all worn out.
>> Headset Power-On and Power-Off
1. Power-On : Press the call button long until you hear the signal sound. The power is On with
LED light on and with "Do Re Mi Pa Sol La Si Do" signal sound.
2. Power-Off : Press the call button long until you hear the signal sound. The power is Off with
LED light off and with "Do Re Mi Pa Sol La Si Do" signal sound.
>> Pairing Headset Registration
1. To use the Headset with other Bluetooth device, the registration process should be through.
2. Pairing is the wireless link between two devices and once registered device does not need to
register next connection time
3. There are two kinds of registration stand-by conditions. After purchasing the headset, if you
power on, the LED starts to blink green color consecutively. And if you press the call (+)upward or (-)downward 4 seconds, the LED starts to blink continuously with the sound of
“Di Di Ding”
4. Please register the Headset referring to the Bluetooth mobile phone.
5. After selecting the Bluetooth manual of the Bluetooth mobile phone, the followings are displayed
on the screen like Bluetooth mode setting-Confirm-Other device registration-Confirm.
Press the confirm button to select one among Headset, Hands-free, Stereo Headset, then the
mobile phone is searching the Bluetooth device. Depending on the mobile phone model, the
mobile phone registers "ED-8800" after 5 ~ 7 seconds and ADDR is formed. Press the OK button
and input password NETQUOTEVAR:0000 in the password windows, then the Bluetooth mark is created after
5 ~6 seconds.
6. After the registration finish, the green LED starts to blink twice at the intervals of 5 seconds. The
Bluetooth mark is displayed on the mobile phone LCD windows at the registration completion.
7. If the LED starts to blink twice at the intervals of 5 seconds, the pairing is successfully done.
If the LED starts to blink consecutively for scores of seconds, please try again after power off the
headset and mobile phone simultaneously.
8. According to the mobile phone model, if the pairing is blocked please try again.
9. After the device registration, if the connection is broken at the power-off, and also if mobile
phone does not recognize the headset, please press the call button rightward or leftward
slightly and the mobile phone is connected at Headset (H/S) and Hands-free (H/F)
profile. While using at Stereo (A/V) profile with mobile phone, when Stereo profile is not
recognized, press the button shortly (0.5 seconds), the Stereo profile is again connected.
10. Per the Bluetooth mobile phone model, the headset is automatically connected after the
pairing process. Then the Green LED starts to blink twice consecutively at the intervals of
5 seconds.
Click to expand...
Click to collapse
When I pull down the top menu (so to speak) and tap the bluetooth icon to turn on bluetooth, the phone always makes the notification sound. This is really annoying. It's the default notification sound so I can't just change the notification sound.
Am I missing some way that I can turn off the phone making a noise when I enable bluetooth?
kettir said:
When I pull down the top menu (so to speak) and tap the bluetooth icon to turn on bluetooth, the phone always makes the notification sound. This is really annoying. It's the default notification sound so I can't just change the notification sound.
Am I missing some way that I can turn off the phone making a noise when I enable bluetooth?
Click to expand...
Click to collapse
I assume it is playing in both places, right? Speaker then your BT headphones? That's how it happens for me. I've wondered the same thing, but I'm guessing it plays in both places because it assumes you won't keep your headphones on all the time, and you won't hear the notifications in that case if it only plays in the BT headphones.
I've also noticed that in the car, when I have the S3 connected to my stereo via the headphone jack, the notification only plays through the phone speaker. It causes the playing music to reroute there briefly while it plays the sound...I know because the music stops, notification plays through phone speaker, music resumes through the phone speaker, then switches back to the headphone jack. very annoying.
kettir said:
When I pull down the top menu (so to speak) and tap the bluetooth icon to turn on bluetooth, the phone always makes the notification sound. This is really annoying. It's the default notification sound so I can't just change the notification sound.
Am I missing some way that I can turn off the phone making a noise when I enable bluetooth?
Click to expand...
Click to collapse
You don't say if you are rooted but , if so, the blue15 toggle mod by DavidDee in Themes and Apps does not make this sound when activating Bluetooth.
bsam55 said:
You don't say if you are rooted but , if so, the blue15 toggle mod by DavidDee in Themes and Apps does not make this sound when activating Bluetooth.
Click to expand...
Click to collapse
Yes, I'm running the stock ROM but rooted. It appears that the sg3 ONLY makes the notification sound for turning on bluetooth if you do it through the pull down menu with the toggle bar at the top of the screen. If you go through menu/settings, or ANY kind of widget on the main screen, the notification sound doesn't come on.
I turn on bluetooth so I can use a headset and NOT bother other people, so setting off the notification sound when I turn on bluetooth is counter-productive.
kettir said:
Yes, I'm running the stock ROM but rooted. It appears that the sg3 ONLY makes the notification sound for turning on bluetooth if you do it through the pull down menu with the toggle bar at the top of the screen. If you go through menu/settings, or ANY kind of widget on the main screen, the notification sound doesn't come on.
I turn on bluetooth so I can use a headset and NOT bother other people, so setting off the notification sound when I turn on bluetooth is counter-productive.
Click to expand...
Click to collapse
The mod I mentioned is a replacement for the dropdown with extra options and triggering bluetooth from dropdown no longer makes this sound.