i started to put a new rom on my phone.. and it was in bootloader mode.. it was just checking the info and it stop working.. so I Xed out of it and took the battery off my phone. i put the battery back.. and my phone wouldnt turn on!!! please tell me what to do.. it wont enter bootloader mode or do a hard reset. HELP!!!!
nevermind.. batteries were dead.. both of them
DoH
Related
Hi guys, I have a question, normally i killed my diamond, it doesn't tzrn on anymore, how i can get it back to life, i have experience so i do not know what went wrong
any help
hi
are you able to get into the bootloader? done via holding the volume button down and pressing the reset button?
Just for tech information.
If Im not able to get into bootloader, any solutions to restor it or reflash it?
megahenebi said:
Just for tech information.
If Im not able to get into bootloader, any solutions to restor it or reflash it?
Click to expand...
Click to collapse
If you can't do that, it's pretty much over. Prepare to ship the device back to HTC for warranty purposes. If they charge you more then your willing to pay for the repairs, tell them that they can keep it.
Who knows, they might fix it for free if warranty isn't void..
Hope this will work for you
do u have olipro hardspl already installed on you diamond...if u do, try holding the power button, volume down and hard reset button the same time...you can see the bootloader again and (you hv to quickly flashed it becaused it will only sync for few sec)quickly flashed a fresh copy of olipro hardspl and it will be back to life..now u can flashed your new rom as a you did before...i hv face the same problem power button not working, bootloader cannot sync with pc...my diamond is totaly dead.. i did send my diamond to HTC for repair..they ask me USD 320 the replace the motherboard..and at last i tried the solution found on xda and my diamond is back to life again...hope it will work for u to...gud luck
holding the power button, volume down and hard reset button the same time...you can see the bootloader again and (you hv to quickly flashed it becaused it will only sync for few sec)quickly flashed a fresh copy of olipro hardspl and it will be back to life..now u can flashed your new rom as a you did before
Click to expand...
Click to collapse
Would love to see this work for him and others in this spot.
Good Luck...
Unfortunately nothing happened, i have full battery but diamond does nothing, dead. how can it be that a flashing caused to kill device that it will never turn on???, i would know what to do if it can turn on, but now is a question HOW to turn it on?
dubravk0 said:
Unfortunately nothing happened, i have full battery but diamond does nothing, dead. how can it be that a flashing caused to kill device that it will never turn on???, i would know what to do if it can turn on, but now is a question HOW to turn it on?
Click to expand...
Click to collapse
Dear dubrak0 would u spare us a bit more detail on how did you bricked your diamond..wat did you flash to get your diamond bricked and wat happened if you connect your diamond to your pc as you mentioned earlier in the post you cannot enter bootloader..and yes bad flashing can caused you to kill your device and it will never turn on...
As for me, i flash a rom doing all the normal steps but i dont know what went wrong just after the flashing my device cannot be turn on..i tried to enter the bootloader by pressing volume down and reset button but the bootloader stay only for 2 sec and cannot sync with my pc..when i try to charge the bootloader keep poping up a few sec and repeat it self and it wont charge the phone....nothing is workin all the button dead accept for the repeating bootloader and the device cannot sync with pc for flashing...then only i sent my diamond to htc as i mentioned earlier..
The solution is a bit tricky actually...you hv to press and hold the power and volume down button the same time then press the reset button and lift but still holding the 2 button for few more sec till the bootloader appear.. when the bootloader appear it will sync to your pc and stay there few more sec a bit longer then before...therefore u must quickly flash the new hardspl again...if you succeed with that then only it will be back to life...
If you say that your device is dead as in nothing happens even if u connect it to your pc then nothing can be done...if your device is still under warranty then send it to htc as they informed me that if they could not detect any third party hardspl installed (which is in your case the device is totally dead and no chance to even check wats installed on the device) they`ll fix it for u without any charged..but if u hv your warranty expire then to bad..your device is totally unuseable unless u pay usd 320 for the board replacement or do jtag..
if you have hardspl then you cannot kill it from a rom flash, so im assuming you didnt!
Ok, so today i was walking around and I dropped my phone and the battery fell out. I try to put it back in and start my phone... no luck. After that it doesnt turn on anymore, doesnt go into download, doesnt go into recovery.. When I connect it to a charger the screen goes on saying its charging but if I click the power botton nothing happens...
Can someone please help? I cant get into download nor recovery :/
sasha101 said:
Ok, so today i was walking around and I dropped my phone and the battery fell out. I try to put it back in and start my phone... no luck. After that it doesnt turn on anymore, doesnt go into download, doesnt go into recovery.. When I connect it to a charger the screen goes on saying its charging but if I click the power botton nothing happens...
Can someone please help? I cant get into download nor recovery :/
Click to expand...
Click to collapse
Can't believe no one has helped yet. The screen looks fine when charging? Maybe you should try Odin anyway. Go through the motions of putting it in download mode and see if Odin recognizes it then flash an EC05 tar if it does.
I have rooted and unlocked my phone i have clockwork mod installed. the phone was going into fastboot mode till about 15 mins ago not its not even coming on. the buttons are not even responding. earlier i tried going to recovery mode from fastboot and the screen shook and got stuck...
right now the phone refuses to go into any mode.. its not coming on.. help!!!
hmeister said:
I have rooted and unlocked my phone i have clockwork mod installed. the phone was going into fastboot mode till about 15 mins ago not its not even coming on. the buttons are not even responding. earlier i tried going to recovery mode from fastboot and the screen shook and got stuck...
right now the phone refuses to go into any mode.. its not coming on.. help!!!
Click to expand...
Click to collapse
Is the battery charged. I only ask because I was fixing a phone for my sister today and I could not get it to turn on. I messed around for an hour before I put the phone on charge. It booted right up.
painter_ said:
Is the battery charged. I only ask because I was fixing a phone for my sister today and I could not get it to turn on. I messed around for an hour before I put the phone on charge. It booted right up.
Click to expand...
Click to collapse
i guess it is since it has been connected to my continuously.. i only removed it for a sec to try and restart after pulling out the battery...
hmeister said:
i guess it is since it has been connected to my continuously.. i only removed it for a sec to try and restart after pulling out the battery...
Click to expand...
Click to collapse
connected to my PC *
Hello i have a g pro f240l, yesterday when i flash sphinx the phone was loading apps at the start, and then power off and now cant do anything, sometimes can enter in download mode, when i flash always at the 99% fail and turn the connection in qualcomm HS-USB, and cant do anything...
so what an i do?
flash fails almost at the end..qualcom drivers cant do anything with boardiag..what recommend to do?
in the morning when i woke up i turn on the phone and works well after 1 hr or 2 power off again, and the no power on..no charges, nothing happends..
please i need help.
i bought in china so i can send it back but i wanna try everything before lost time sending back .
thanks
Please charge the phone overnight (in power off mode - remove the battery for 2 mins, put back the battery, do not turn the phone on). Then try to revert back to Stock ROM in download mode...
Ok i was on odin trying to root the phone , i had some issues so i had to flash the stock all over again ,anyways it was in download mode and i forgot to put on the cover of the phone so the battery was exposed and it fell out while the phone screen clearly said, "DONT NOT TURN OFF TARGET", no when the battery fell out , i tried to restart the in recovery and even in normal mode and it wont even turn on, the phone is just a blank screen, nothings happens when i try to turn it on , can someone help me please, in the mean time i will be looking around the web for some answers as well...
Govana said:
Ok i was on odin trying to root the phone , i had some issues so i had to flash the stock all over again ,anyways it was in download mode and i forgot to put on the cover of the phone so the battery was exposed and it fell out while the phone screen clearly said, "DONT NOT TURN OFF TARGET", no when the battery fell out , i tried to restart the in recovery and even in normal mode and it wont even turn on, the phone is just a blank screen, nothings happens when i try to turn it on , can someone help me please, in the mean time i will be looking around the web for some answers as well...
Click to expand...
Click to collapse
i am having the same issue power failure occured while firmware upgrade could you find any solution?
Well i have found some information on the net about using a JIG and plug it inside the usb port of the phone to force it to boot into download mode and then having to flash the firmware of the phone. I haven't tested this theory as yet so i can't leave an answer
Probably JTAG is your only solution or maybe Mediatek have some low tools you can use.
I need help too. Stuck in Odin mode and cant go any where. Tries to bypass the pattern I forgot and dint knw what to do now