Related
Ok...
I know, this is wierd...but every now and then the \storage card folder just disappears from the system. It's like the pocket pc no longer recognizes that there's an SD card there. I've tried taking it out, and then putting it back in. But that doesn't solve the problem. The only way I could get the device to recognize that there's an SD card installed in the slot, is via a soft reset.
Any suggestions on how to resolve this issue? I used to have an iPaq h4350, and this NEVER happened...
Thanks,
Quordandis
Strange...
Tell more about your SD card and device's ROMs (versions).
Let's see... I have a Siemens SX66 model PH20B1, ROM v1.40.00 WWE, Radio v1.13.00, ExtROM 1.40.125 WWE
The SD card is a PNY 1gb....Wierd, huh?
Thanks,
Q
I have a similar problem. But the \Storage Card 'sometimes' comes after removing and inserting back, otherwise the softreset will only do the trick. Any idea. My ROM versions are as in my sig
Our versions are almost identical, except the ExtROM is slightly different (which I'm not sure really makes much of a difference). Also, taking it out and putting it back in does NOTHING for my device....only a soft reset will solve the problem....
Any ideas?
Thanks,
Q
SD Card spontaneously Disappears
I have the same problem... if I press a little bit the storage card down it appears again. I thing this is due to bad contact result of a fall.
I send it to repair but came the same way, they only up-to-date the rom version.
Should I try to open it and check the contcats !?!?
some more info
When the PPC enters this mode, if I browse the storage card through the PC (via active sync), it shows only the folders and all files are missing. If I sopft-reset it and check it again, (life came back) I could see all the files then.
Any idea why this is?
Yes, I noticed the same thing today...!
The folders on my Storage Card are still there...but are empty! File explorer shows that the folders DO contain stuff.
I have tried to soft-reset, but no luck yet. Strange.
HappyGoat said:
Yes, I noticed the same thing today...!
The folders on my Storage Card are still there...but are empty! File explorer shows that the folders DO contain stuff.
I have tried to soft-reset, but no luck yet. Strange.
Click to expand...
Click to collapse
Softreset worked for me..
I occasionally get this - usually when I have been using tomtom 5 and getting it to recalculate a lot - I noticed last time that the unit was a bit warm, so it may just be a thermal issue - I have overclocked to 530MHz+.
A soft reset sorts it out
I get this a lot too.. Programs that are currently running are
1. PocketPlus 3.0
2. Resco 2005
I notice 1 thing though.. that if I do a quick ON/OFF, the SD disappears and I have to softreset to get it back.
However, my work around is that when I switch it on, I let the thing fully load first before turning OFF the unit. (See through Resco today pluging-in). When the indicator appears.
So far hasn't bother me for more then a week d..
Happy trying.
Will try the same trick then...
I've uninstaled pocket plus 3.0 and never hapen again.I still have resco explorer 2005
Best regards
ooh
Im experiencing that same problem. The only way toget rid of this annoying thing is to soft reset the device.
Have anyone experienced this problem before?
Just cleaned up my pc with Dinnarsoft memaid & Pocket Mechanic.
I dont know whether these programs are the ones that did it...
basically, after cleaning all the rubbish from pocket pc, I tried to remove a program, suddenly I saw the "remove program" list is empty.
I can still run all the programs on my ppc (WM5), however, it doesnt seem to be able to sync anymore...
any suggestion?
Thanks
I've got that same problem on my Cingular 8125. I'm not sure how it happened, but if I can't find a solution, then I'm going to hard reset and start re-installing apps...
same here
I have the Cingular 8125 also...very frustrated with this problem. Can't sync, cant install, cant uninstall, cant do anything related to programs adding/removal. Everything else works fine, except the "remove programs" does not have anything listed on it, not even the total program memory available...its like the phone's lost its mind...
can anyone help pls, or at least point me in the right direction?
Thanks alot
I searched and searched and could not find where anyone else came up with a solution other than to hard reset. I ended up hard resetting and installing all my applications again.
My 8125 has also been hit by this problem now.
I was installing some .exe file with activesync. Since it was taking a while to be sent to the phone from the computer, I decided to install a another .cab file in the meantime and hoped the .cab file would finish before the .exe file from the computer was done being sent to the phone. They kind of happened at the same time. I guess I was being too greedy. Then it happened.
Then I got notification that both the installations were unsuccessful.
Soft resets don't seem to do anything.
Been running my MDA Compact III for just under a week now. Everything was going fine, tom tom working etc. Yesterday I installed SPB Pocket Plus , now I can't connect via activsync and can't delete any files (from phone or memory card), get the error message....
Error Deleting File
Cannot delete 'filenamehere': Access is denied.
Make sure the disk is not full or write-protected and the file is not currently in use.
What have I done? I've tried a soft reset, that didn't work. I've took the memory card out and can delete files when I put it in a card reader. I'm hoping if changed a setting somewhere but I can't for the life of me work out what I've done.
Can anybody offer any suggestions?
I've never had problems after SPB Pocket Plus was installed. Currently I don't have it installed on my device since I use it solely just for navigation thus I cannot find a more concrete solution but to try uninstalling SPB Pocket Plus and see if your problem is solved.
Thanks for your reply, couldn't uninstall anything so had to go down the hard reset route. Wasn't too bad though, I got back up and running in about an hour will all my programmes installed and working again.
Still don't know what happened though.
zerimar said:
I've never had problems after SPB Pocket Plus was installed. Currently I don't have it installed on my device since I use it solely just for navigation thus I cannot find a more concrete solution but to try uninstalling SPB Pocket Plus and see if your problem is solved.
Click to expand...
Click to collapse
activesync problems
iam also facing the same problem. is there any alternative solution for this problem other than hard reset.
thanx
It may have nothing to do with Pocket Plus but rather the mysterious problem discussed here:
http://forum.xda-developers.com/showthread.php?t=285511
I had the same message and couldn't delete the erroneous files. My solution was also to hard reset.
My view
Oh i had the same problem,these files become stacked and are due to long paths,use the tool available at pathtoodeep.com ,it is a tool which deletes and also searches such undeleteable files and also assists in installation and sharing of long pathed files
Hi, my bluetooth does not seem to work on the device. If I reset it i get the error message on start up saying 'BTTRAYCE' is not a vlaid Pocket PC application. Is my unit faulty. I have thought about doing a hard reset on the device but wanted to check with you guys if there is a simple fix, the unit needs replacing? or if the hard reset would work. If I was to do the hard reset what can I use to backup all my contacts with there facebook links etc and will the facebook links still exist?
Bladesharp said:
Hi, my bluetooth does not seem to work on the device. If I reset it i get the error message on start up saying 'BTTRAYCE' is not a vlaid Pocket PC application. Is my unit faulty. I have thought about doing a hard reset on the device but wanted to check with you guys if there is a simple fix, the unit needs replacing? or if the hard reset would work. If I was to do the hard reset what can I use to backup all my contacts with there facebook links etc and will the facebook links still exist?
Click to expand...
Click to collapse
You can use a program called Sprite Backup, although its not free. That will backup a lot of things, but to be honest, its probably best to start from scratch as it backs up all registry changes too, which could be the problem for you.
My bluetooth works fine, what part are you having trouble with?
Bluetooth Issues
I am having the same problem.
I have narrowed it down to tomtom installation (no bluetooth issues until tomtom is installed)
I have tried with TT7 910 9185 as well as TT7 445 and after the reboot the same error occurs.
I have also tried installing it on the memory card, and hard resetting it, however, the TomTom doesn't appear to talk to any Satellites.
I installed Tomtom 7.910.9185 and it says "Unable to start. Not enough memory" or similar. I installed it from cab on my 8GB Storage Card in the same way that worked perfectly on my Raphael.
The point of telling you that is my bluetooth is still working perfectly.
As for you Bladesharp, surely if you Activesync all the relevant links and details will remain with your contacts? I'd say a hard reset will determine if it's a hardware issue.
rb14 said:
I installed Tomtom 7.910.9185 and it says "Unable to start. Not enough memory" or similar. I installed it from cab on my 8GB Storage Card in the same way that worked perfectly on my Raphael.
The point of telling you that is my bluetooth is still working perfectly.
As for you Bladesharp, surely if you Activesync all the relevant links and details will remain with your contacts? I'd say a hard reset will determine if it's a hardware issue.
Click to expand...
Click to collapse
I'm on 7.915 for TomTom and don't have the issue.
Links to Facebook won't transfer with Active Sync, they are stored somewhere seperately on the phone and are not part of the Contacts program in pOutlook.exe, they are part of Manila which is not transferable. Not sure where it is stored, have been looking now for about 2 months
I came across something similar to this last week after installing TomTom from a CAB, and found this post on a related issue...
http://www.noeman.org/gsm/trash-section/65951-tomtom-7-bluetooth-problems-sorted.html
I deleted the two bluetooth files (BtSdKCE30.dll & BtCoreIF.dll) from the TomTom CAB as described, did a hard reset and reinstalled, and haven't had the problem since. Could be the same issue?
Could someone who has not installed TomTom please post the dates of their BtCoreIf.dll & BtSdkCE30.dll? Mine are both 04/24/08 20:10.
Does anyone know if it is possible to revert to the ROM version of these files WITHOUT doing a hard reset?
If some kind person was able to provide me with the ROM version, can I just overwrite the ones in RAM?
R
These came from my device's \Windows directory, and are dated 14th May. I think they are unaffected by this problem, certainly I don't get the boot delay or BTTray boot crash that seem to be the possible symptoms of this. (Use caution, of course; backup what you can before tinkering in case of disaster.)
Sounds the same as my thread
http://forum.xda-developers.com/showthread.php?t=522373
someone already tried the above files? will it correct the problem?
Thanks for the files.
I am happy to confirm that installing the two DLLs gets BTTrayCE.exe working again.
I just renamed the 04/24/08 versions to .was and use Total Commander to copy the files from my storage card to \Windows and rebooted the phone... ActiveSync wouldn't let me copy them directly from my PC as it said there was already a 05/14/09 version there and it was read-only!
As it rebooted, it complained that BtCoreIf.dll was from an unknown supplier but I just OK'd that and everything is fine. Bluetooth & TTN working.
R.
PS Didn't need to copy BTTrayCE.exe as this had not been overwritted.
Ah, thanks for letting me know. I wasn't sure if the exe was also needed, I only included it since one of the symptoms I was getting was that this wasn't a valid executable; but I guess that was just caused by the corruption of the dll's.
I don't think the DLLs are corrupted, just an earlier version.
Just like the bad old days of Windows 3.1 where installing one package would break others due the installing of different versions common DLLs. Gosh, I feel old!
R.
dicko99 said:
I don't think the DLLs are corrupted, just an earlier version.
Click to expand...
Click to collapse
Ah yes; that makes more sense! I still had a boot delay even with the files from the most recent TomTom version I could find.
Hi there,
i had the same Problem with TT. In my case I also copyed the BTTrayCE.exe. Now I dont get any error anymore but the Bluetooth can still not be started. Can somebody please upload the Original BTTrayCE.exe. Thank you
I did a reset of my Swisscom German Device. Copyed the 3 BT Files and installed the TT7 v7.910.9185 again. After restart of my Device the same BT Error. I replayced the 3 Files with my Original ones and restarted again. New Error comes up "Bluetooth Stack can not be started"
zizzo
Thanks guys a lot. Rewriting those two files solve the problem. Bluetooth works now.
ianjd said:
These came from my device's \Windows directory, and are dated 14th May. I think they are unaffected by this problem, certainly I don't get the boot delay or BTTray boot crash that seem to be the possible symptoms of this. (Use caution, of course; backup what you can before tinkering in case of disaster.)
Click to expand...
Click to collapse
Thanking you very much kind sir. I unzipped these files directly to my storage card in USB mode and just double clicked the exe file and it fixed my bluetooth up for me. (good job as I am a technical biff when things get registry level)
EDIT sorry I thought it did but it didn't just fix it by double clicking the exe. I've hard reset now as I don't really know what I am doing
As said in the thread here:
http://forum.xda-developers.com/showthread.php?t=522373&page=4
There is no need to replace the two files.
Just delete them and soft reset. They will be replaced with the two right ones.
Bluetooth problem with TomTom resolved!
matrixis2day said:
I replayced the 3 Files with my Original ones and restarted again. New Error comes up "Bluetooth Stack can not be started"
Click to expand...
Click to collapse
I had the same and here's what I just discovered and what worked:
I removed the files and expected them to be replaced upon restart. When I checked I noticed a file in the \Windows directory named BtSdKCE50.dll - I had not noticed this before. I (re)moved this, rebooted again and now Bluetooth and FM Radio (!) are working, yay!
hth,
TA2
This fixed my problem. Couldnt delete the old files but copied the replacements over the top and that sorted it. My version of Tom Tom wont work stil but it is 7.5 I think.
I've had exactly the same problem I've tried overwriting the dll's with the files provided in this thread,
Now whilst I don't get the error message, when I try and enable bluetooth, I get "cannot start bluetooth stack" error
Any ideas peeps?
So my friend, having made a move to the iPhone 6+, asked me to help her move pictures, etc. from her old phone to her new phone. Unfortunately, I don't know what went wrong and her phone (t989) won't connect to the computer. The notification that it's in USB mode doesn't show, the sd cards (internal and external) aren't being read / even visible on the computer, and it's a stupid phone that I personally want to destroy.
Caveats:
She is on Gingerbread still having never updated her phone. All her pictures are on her internal SD card too. Apps are of course restricted by her OS (but it wouldn't be that hard to find old apps, just time consuming). Google Play Store crashes frequently while downloading apps. She isn't rooted (obviously, I don't blame her since she isn't interested in all that, and the only root method seems to be to use ODIN, but that would wipe her internal clean which I don't want to do.
What I've done:
I've done a hard reset on the phone (shut down, remove battery, insert battery, turn on). Not sure if the seconds matter, but it was a quick take out, put in. Maybe a few seconds, definitely not 30 more. But when the phone turned on, her time went back to 1970 or something.
I've tried to copy the DCIM of the internal onto the external, but she has like 5k pictures and using My Files, it quits the transfer randomly without an indication where it quit or why.
AirDroid, but that gave me invalid package. Could have installed manually, but didn't have that much time and didn't think about it.
Bluetooth on the mac doesn't stay connected to the phone.
My goal:
Figure out how to connect to the computer preferably over USB. I still need to transfer her whatsapp messages too but without it showing up on the computer, I'm stuck. I've downloaded Samsung drivers, I have Samsung Kies installed. I just don't know what is wrong with it.
Any ideas? I've done all this on my laptop, but I told her to come over some day to use my desktop and see if it works on there (I was using a Windows Bootcamp partition on my macbook pro). I tried to connect the phone to OSX as well, but I didn't install Kies, which might be a reason... but the USB connected notification just doesn't want to come.