Related
Hi all.. This is my first post so obviously this is a newbie question! My XDA 2s is not able to recognize the name of my mobile operator here in India, and it shows up as "40468". Is there any tweak by which I can manually feed in the name of the operator so it shows up on the Phone screen?
Just to explain the issue clearly - the number on the top right is where the name of the mobile service provider should show up. Why does it show up as a number (40468) and not as a name, as it did on my Sonyericsson P910i, or indeed other phones? Grateful for any help in this matter.
It's because basically each mobile phone operator is allocated a number (in your case 40468) and inside each phone is a tiny database of operator names/numbers.
I used to think that the operator "sent" the name, but a few years ago now a UK operator changed it's name from "Cellnet" to "BT Cellnet" and then to "O2", however phones wouldn't change. But if you had a newer version of firmware on your phone it would change (so that supports my theory that the database is in the firmware).
I think this also make sense because the operator isn't going to know how many characters are available for showing the name/abbreviating as necessary and so it makes sense for the mobile phone providers to keep their database in sync with the "main" one for who is allocated what as it'll make sure the information is displayed correctly as they can abbreviate as needed for each device.
At least that's how I understand it. So in your case it sounds like your phone doesn't know your provider. Perhaps a newer upgrade might help (1.33 or 1.40?), but I'd just ask your provider. If they sold you the phone it's pretty weird it doesn't support their own network. It might just be a faulty handset :-(
Perhaps post the name of your operator and we can see if anyone else is using them and it works for them
Neil -- many thanks for your reply. When I bought this phone (unlocked) from Kuala Lumpur, it wasn't as yet available in India. Now it is, though. Maybe thats why it doesn't show up all of India's mobile service providers. Anyway, my mobile provider is MTNL in Delhi.
Upgrading ROM to 1.40 may solve the problem, provided its and "Asia" ROM. Is that available yet? Is it possilbe to "cook" the rom to add service providers?
Many thanks for your help Neil.
Well you're using PH20B which is same as my phone is here in the UK and I'm running the 1.40 ROM so technically you shouldn't any problems. I'd wait for someone else to just verify either that A) What I've said about being stored in the phone is correct or B) Some one using MNTL in Delhi to confirm they have/haven't got this problem.
Because if it's a case of it's fine for them and ROM's are same etc it might be a faulty unit (can't really see how!) and a ROM upgrade might not help and since technically these ROM upgrades aren't always official (1.40 probably isn't) you'd probably have to put it back/find previous ROM before you could take it back.
Upgrading to 1.40 isn't really a pain, see the WIKI (top left) it's daunting at first, but it's actually very easy to do, but do it when you have enough time to reinstall everything because doing any sort of ROM upgrade does a hard reset as well (wipes everything in main memory - \Storage and \Storage Card are safe).
I can't guarentee that this would fix your problem, i.e. your provider is in that ROM, but not sure what else to suggest + 1.40 does come with Media Player 10 which is a bit of an added bonus! You can backup your existing ROM, although it's probably already on the FTP, might be handy to have it in advance if you want to go back.
Hope that was some help!
P.S. If you decide to go down the upgrade route, probably worth upgrading your radio at the same time. I'm all the way to 1.12 and it's fine for me, but some people seem to have stayed with 1.10 because they've had some issues - search forum on this)
Neil -- two quick comments.
One, from using cell phones for the last many years, I feel that the code to decipher the cell provider's number is in the phone. This has happened to me before, when I bought phones which were not available in India, and it's happened again! It seems to me it's a ROM issue, as its logical for cell providers to be consistent (i.e. broadcast their identification numbers) and let the phones decipher them.
Two, is there any major danger that I'll lose the phone itself with a ROM upgrade? I know this has been answered in some other threads of this forum, but it'll be a first for me on this newly acquired beauty!
Cheers and many thanks....
example:
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\RIL\OperatorNames]
"45404"="3-DUALBAND-"
Hehe, big mamaich spoke... :lol:
Yup, those are PPC's: many things can be done by software... :wink:
This is odd...
Since I upgraded my MDA2 to 2.06.00WWE Radio: 1.14.00 I've seen this problem where the carrier name was changed to a number (in my case 334020).
On my previous ROM version I had no problem at all. And this device does not even exsist in Mexico and it displayed the carrier name (Telcel) without a problem.
I think the carrier name is taken from the network itself and fed to the registry but this particular ROM has problems taking this particular carrier numbers.
If I do a network search I can see the other carrier in my area (Movistar as a number also) and two other United States Carriers (Cingular and AT&T) but this time with their names (I live close to the United States).
To "fix" this I created a GIF file named carrierlogo.gif and place it on the Pocket PC Windows directory and now it shows a nice Telcel logo instead!...
@ Rayan
that looks good! Could you please explain how you did it? The first step obviously was to place it on the Pocket PC Windows directory, but what were the other fixes? Did you tweak the registry? Newbie question... I've been a XDA 2s user only for a few weeks Rayan!!
mamaich said:
example:
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\RIL\OperatorNames]
"45404"="3-DUALBAND-"
Click to expand...
Click to collapse
Mamaich speaks loud and clear! Yup, adding that additional string did the trick! I created a string for my carrier ("40468"="MTNL"), did a soft reset and Voila! It worked! Thank you Mamaich, thank you forum!!
Hi Dilip,
I tried the trick on my PDA2k, but not worked..can u pls elaborate how u hv added the string....or made a new key value in the registry?
hdubli said:
Hi Dilip,
I tried the trick on my PDA2k, but not worked..can u pls elaborate how u hv added the string....or made a new key value in the registry?
Click to expand...
Click to collapse
it works and thanks to mamaich (he is the greatest) i tried it on my imate jam and worked like a charm.... all u have to do is navigate to
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\RIL\OperatorNames]
using any registry editor like resco..... once u reach OperatorNames create a STRING VALUE
in the Name box write the number that shows in ur dialing pad and in the String box write the name of the operator or any name u want ..... look at the pic ... and u can write it in any lang u want
As shown by PapaDocta above, I added a string to my registery and this is how my phone looks now:
Hi!!!
Thaks, now it worked...I was trying to make a new key value and what not.....but never knew that it was so simple.
Thanks a ton..This helps very much during roaming...
Hi there
Bored of scrolling through massive threads, maybe it's time we separate some of the issues now. Starting with...
Voicemail indicators not working correctly in WM6.
So, what are your experiences? If yours work, let us know, if not, post what happens.
I'm on Orange UK and I get an SMS from '[email protected]' and '^@' to activate/deactivate the indicator respectively.
I've been googling, and haven't found much about these messages. I think they're supposed to be Class 0 but not sure. Does anyone know which part of the OS is in charge of sorting them out and interpreting them?
Maybe this is a simple reg setting that's missing? Could someone with WM5 and on an operator using vmail notifications run a search through their registry for '[email protected]' and '^@'?
Cheers
joehood said:
Hi there
Bored of scrolling through massive threads, maybe it's time we separate some of the issues now. Starting with...
Voicemail indicators not working correctly in WM6.
So, what are your experiences? If yours work, let us know, if not, post what happens.
I'm on Orange UK and I get an SMS from '[email protected]' and '^@' to activate/deactivate the indicator respectively.
I've been googling, and haven't found much about these messages. I think they're supposed to be Class 0 but not sure. Does anyone know which part of the OS is in charge of sorting them out and interpreting them?
Maybe this is a simple reg setting that's missing? Could someone with WM5 and on an operator using vmail notifications run a search through their registry for '[email protected]' and '^@'?
Cheers
Click to expand...
Click to collapse
I get a different character, for deactivate - its a full size triangle. Again, on Orange UK.
I'll try and run thru installing all the WM5 orange cabs to test on Sun - I've got our Wedding celebration party tommorow! I'll get my ass kicked if I go near it before then.......
Congratulations!
Yeah I get the same full triangle, sorry. I've seen it abbreviated to ^ on a couple of other forums so used that, but it is actually a complete triangle.(Alpha symbol?)
joehood said:
Hi there
Bored of scrolling through massive threads, maybe it's time we separate some of the issues now. Starting with...
Voicemail indicators not working correctly in WM6.
So, what are your experiences? If yours work, let us know, if not, post what happens.
I'm on Orange UK and I get an SMS from '[email protected]' and '^@' to activate/deactivate the indicator respectively.
I've been googling, and haven't found much about these messages. I think they're supposed to be Class 0 but not sure. Does anyone know which part of the OS is in charge of sorting them out and interpreting them?
Maybe this is a simple reg setting that's missing? Could someone with WM5 and on an operator using vmail notifications run a search through their registry for '[email protected]' and '^@'?
Cheers
Click to expand...
Click to collapse
Yep, I have exactly the same problem with the XDA-Live 0.1 ROM. Using Orange UK.
Couldn't delete the second message. I kept getting a message about the a SIM error. Reboot of the phone and the message had gone.
Anyone worked out a fix?
No Voice Mail
Hi all,
I have the same issue with Orange UK as the rest of you. I am supprised that no one has a solution yet. Will keep an eye on this post for a fix !
I cant spend any time on this at the moment.
Setting [HKEY_CURRENT_USER\System\State\Messages\vmail\Line1\Unread]
"Count"=dword:00000000
clears the notification..
Also once in this state I dont get the initial text, but I do get the vm icon! Something keeps setting the count value to -1 which seems to get it messed up.
Cant find out what processes the notification, but it looks like its something in the base of wm5 as non of the ext rom programs seem to have any effect.
I have no problems with new voice mail indicators, missed call, new sms notifications, etc. All show up correctly. Using Cingular/AT&T..
Maybe the issue is only orange based on the previous comments???
Thanks eagle 1.
If anyone has voicemail notifications working on Orange in WM6 please post, as I'll know I'm doing something wrong.
I've tried all the customisation cabs and nothing's worked so far.
The problem is that the current WM6 rom does not support CPHS this is a set of commands that include the MWI (Message Waiting Indicator), Orange are the only provider in the UL using this feature. I feel the issue is that the bases ROM currently being used by the chef is not a final RTM of WM6 as it is missing a few features that the RTM should have. I used to have the issue when upgrading Nokia roms but with those it was a simple fix through LogoManager.
For more info on CPHS see http://www.phonescoop.com/glossary/term.php?gid=220
Thanks, that's great that we have an answer now to why it doesn't work. I guess the obvious thing to do is just wait until the final ROM's released, unless anyone with a bit more knorr-how knows of a way to add CPHS features to WM6...
Can someone try this workaround.....
http://www.miousers.co.uk/viewtopic.php?t=144&highlight=dialmonitored
Just dropping by, I'm flat out at work, cant spend any time on this at the moment, but stumbled over the above...This allows the device to clear the count as soon as you dial your VM, not pretty, but a temp fix...(assuming it works!)
(also found this on msdn..... http://msdn2.microsoft.com/en-us/library/aa457989.aspx)
and perhaps even editing CEMAIL.VOL may be another route....
This isn't a problem with all versions of WM6.
As well as a SPV M3100 (Hermes) I also have a SPVM5000 (Universal) also on Orange and the notifications work perfectly on the Universal.
SPV M3100 - XDA Live 0.10
SPV M5000 - Midget 0.1
I'll try to compare registry settings see if I can spot anything obvious
One thought as to the VoiceMail indicator and differences between Universal & Hermes versions of WM6.
I was wondering if this is something that is dependant on the radio rom.
I am using the Orange radio rom on my Universal but as far as the Hermes is concerned I've left it with the 1.16.00.00 rom which I think was from prof's SIM & CID unlocker v2a
Interesting...
That could be it. Frustratingly, I updated my radio ROM at the same time as installing WM6 so I can't isolate the problem. I'm using the 1.35 radio ROM that's on the FTP. I suppose this could be where orange make their voicemail customisations.
Is anyone running an Orange radio ROM with WM6? Can you please post your success with voicemail notifications?
I am on WMXL 0.2 and left my radio on the original orange radio of 1.06.00
Since upgrading to WMXL 0.1 and 0.2 I have NOT had the spool icon - but have received the system sms's. So I don't think its radio dependant.
I haven't however run any of the orange ext rom cabs as one or more of them made my wmxl 0.1 unstable - whereas loading wmxl 0.2 and then manually entering data connections etc has given me a fast stable device (without voicemail spool icon!).
Bump......
Anyone had any luck with this yet?
Taz69 said:
This isn't a problem with all versions of WM6.
As well as a SPV M3100 (Hermes) I also have a SPVM5000 (Universal) also on Orange and the notifications work perfectly on the Universal.
SPV M3100 - XDA Live 0.10
SPV M5000 - Midget 0.1
I'll try to compare registry settings see if I can spot anything obvious
Click to expand...
Click to collapse
Could you post or PM me the 'sms_providers.dll' file from the windows directory on your SPVM5000 so I can compare it to the one on the M3100 - I think this may be where the problem lies
Looks like it is down to the version of sms_providers.dll as also reported here.
http://forum.xda-developers.com/showthread.php?t=299072&page=2
I'll post the file from the SPV M5000 rom if still needed(They are of different size) but it will be after the weekend when I'm back home.
See post #16 from olipro on this thread, all sorted now and working perfectly.
http://forum.xda-developers.com/showthread.php?t=299072&page=2
You do need the developer certs installed to use the fix though (link in the thread) and you may have to rename the new dll and do some registry editing - all the info you need is in the linked thread.
I'm currently running Black 2.5 (the T-MOB variant) and everything is fine.
But I'm tempted to upgrade to Black 3.x before I re-install all of my apps on my Vario (the speed improvement sounds good).
Has anyone with a Vario/T-Mobile installed Black 3.x? I see that there isn't (and will never be) a T-Mobile variant. What will I lose with a generic install? How hard is it to customise it for T-Mobile (UK)?
Thanks in anticipation.
Bobby
bobbyelliott said:
I'm currently running Black 2.5 (the T-MOB variant) and everything is fine.
But I'm tempted to upgrade to Black 3.x before I re-install all of my apps on my Vario (the speed improvement sounds good).
Has anyone with a Vario/T-Mobile installed Black 3.x? I see that there isn't (and will never be) a T-Mobile variant. What will I lose with a generic install? How hard is it to customise it for T-Mobile (UK)?
Thanks in anticipation.
Bobby
Click to expand...
Click to collapse
Yes and it worked perfectly.
bobbyelliott said:
I'm currently running Black 2.5 (the T-MOB variant) and everything is fine.
But I'm tempted to upgrade to Black 3.x before I re-install all of my apps on my Vario (the speed improvement sounds good).
Has anyone with a Vario/T-Mobile installed Black 3.x? I see that there isn't (and will never be) a T-Mobile variant. What will I lose with a generic install? How hard is it to customise it for T-Mobile (UK)?
Thanks in anticipation.
Bobby
Click to expand...
Click to collapse
Its fairly easy, all you really need are the internet and mms settings, look for a thread with operator settings in the title and find a cab file called t-mobile uk fixed.
Just drop it on to a storage card and run it whenever you do a hard reset or flash a new rom version.
Cant see why you would need the other t-mob customaizations as they mostly suck eggs.
Edit:cab file attached below
Here's the cab
Just drag to your Vario and run it.
chrisjasper said:
Its fairly easy,
Click to expand...
Click to collapse
Thanks Chris.
Let me get this right. Upgrade to Black 3.x. Copy CAB to device. Run CAB. Voila? This sets everything I need?
I agree most of the T-Mobile extras are crap but I need the settings for Internet/GPRS/MMS/SMS etc.
Cheers.
yes, working fine here, all connection settings set manually.
bobbyelliott said:
Thanks Chris.
Let me get this right. Upgrade to Black 3.x. Copy CAB to device. Run CAB. Voila? This sets everything I need?
I agree most of the T-Mobile extras are crap but I need the settings for Internet/GPRS/MMS/SMS etc.
Cheers.
Click to expand...
Click to collapse
Yep. I actually have a directory setup on my sd card called rebuilds with the cabs I need to reset my ppc up after flash/hard reset. Generally takes me about half an hour now to set up everything, including restores of pim records
chrisjasper said:
Generally takes me about half an hour now to set up everything, including restores of pim records
Click to expand...
Click to collapse
I'm with Orange and my flashing routine now is:
1) flash new rom
2) run pimping changes
3) manually enter gprs and mms settings
4) sync with 4smartphone exchange server
5) run smsproviders cab off Storage card (to sort voicemail)
6) install spb pocket plus and customise today launchers
7) set up two pop mail accounts
8) sign in and configure windows live messenger
Got it down to about 15 minutes now (but it does help that exchange server syncing is so damn quick.)
I tend to install things like Reader that like a soft reset so it takes me a little longer.
sinmae said:
yes, working fine here, all connection settings set manually.
Click to expand...
Click to collapse
Is it as fast as people say? Did you notice a speed improvement when you installed it?
MDA Vario II works with Black 3.01, what about rSAP?
Hi there,
Just as it has already been mentioned earlier (upgrade to 3.01 on T-Mobile MDA Vario II). I took the plunge today and installed version 3.01 straight from WM5. I was initially a bit apprehensive being my first update since I got the phone and I can confirm that it works well. I simply had to add the 3G and MMS settings back or just use the T-Mobile cab to get everything back to normal.
Speed actually seems faster than before. The question I have got now is what happened to the rSAP (Remote Simm Access Profile) as I need to ensure that I can use my phone in my "troublesome" Mercedes CLS. Never was able to pair it with the car so i'll be testing it tonight. I just noticed that the rSAP seems to be missing.
Any help on this will be greatly appreciated.
Vido.
It works a treat, however when i goto use Live Messenger it cannot connect and doesn't present me with a login form like it did with Black 2.0... Is anyone else having trouble with this? I'm using a Vario II, i've tried connecting over 3G, Wireless and through ActiveSync, all with no joy,
The service may be down, mine works without any hitch. Then again, I haven't and never do install any other third party software.
bobbyelliott said:
I'm currently running Black 2.5 (the T-MOB variant) and everything is fine.
But I'm tempted to upgrade to Black 3.x before I re-install all of my apps on my Vario (the speed improvement sounds good).
Has anyone with a Vario/T-Mobile installed Black 3.x? I see that there isn't (and will never be) a T-Mobile variant. What will I lose with a generic install? How hard is it to customise it for T-Mobile (UK)?
Thanks in anticipation.
Bobby
Click to expand...
Click to collapse
All working ok for me, web'n'walk back working and exchange server sync'd ok. TomTom OK. Calls OK...
Only problem I have is connecting to a WPA2 WLAN.... maybe me.... maybe the Black 3.0 (2.5 worked ok). Need to spend sometime looking this evening.
Justin
TomTom
Justin, I take it you have the app TomTom on your mobile, rather than being a 910 or similar?
I took one of the other WM6 ROMs and the DUN (data transfer) has been removed so I can only use it as a hands free device and not to update traffic over GPRS.
vido said:
Hi there,
Just as it has already been mentioned earlier (upgrade to 3.01 on T-Mobile MDA Vario II). I took the plunge today and installed version 3.01 straight from WM5. I was initially a bit apprehensive being my first update since I got the phone and I can confirm that it works well. I simply had to add the 3G and MMS settings back or just use the T-Mobile cab to get everything back to normal.
Speed actually seems faster than before. The question I have got now is what happened to the rSAP (Remote Simm Access Profile) as I need to ensure that I can use my phone in my "troublesome" Mercedes CLS. Never was able to pair it with the car so i'll be testing it tonight. I just noticed that the rSAP seems to be missing.
Any help on this will be greatly appreciated.
Vido.
Click to expand...
Click to collapse
I gave rSAP a try with an earlier black build, and I'm sorry to tell you that it behaved exactly the same as WM5 with the Merc car kit - i.e. just doesn't work (even once you've hacked the stack to make the Hermes look like a phone). If you get anywhere, it would be great to hear, but I'm afraid I think the Merc kit is just toooo limited in what it supports.
vido said:
I took the plunge today and installed version 3.01 straight from WM5. I was initially a bit apprehensive being my first update since I got the phone and I can confirm that it works well. I simply had to add the 3G and MMS settings back or just use the T-Mobile cab to get everything back to normal.
Vido.
Click to expand...
Click to collapse
Hi Vido.
I hope you read the extensive guides mr Vanx has done on upgrading. If not, consider this a stern warning to do so *now* (link in my sig)
Your post suggests that you did not put on the olipro bootloader which means you are taking a risk flashing any OS rom onto your phone - if something went wrong, you would brick your phone.
For you and anyone else reading this, please read Mr Vanx's guides and save yourself, and everyone else, the headache of trying to recover your phone as this stuff voids your warranty.
Cheers,
Smiffy.
ok guys im on tmobile usa and mms doesnt work at all on any of the new wm6 roms. do you guys suggest that i try the uk settings
Hi, you need to check this thread http://forum.xda-developers.com/showthread.php?t=299023
If USA not on here go to your T-Mobile website and do the settings manualy or get them from tech support...
Then post in the above thread!
Martyn
Hi Smiffy/All,
I actually followed all the instructions regarding upgrading to WM6 by flashing all the instructions in Mr Vangs guideline and used the 1.40.olipro bootloader. I just didn't type in all the details because of space. What I meant was that this is my first attempt at upgrading to WM6 after reading all the instructions in this forum.
Like I said my phone still does not work with the Mercedes Bluetooth UHI which is a pain and one of the reasons why I performed the upgrade. The other thing I have just noticed is that my ohne now finds it difficult to connect to my wifi at home using simple WEP key. I was only able to connect to my wifi at work only once after which it doesn't connect anymore. Has anybody else encountered this problem or is it only me.
Last question, is it possible to have the VOIP (Sip) work with T-Mobile? it shows up as "Service Blocked" and I read it somewhere that this can be tweaked. does anyone have the settings for testing this?
Apart from that the Black edition 3.01 is really cool.
Regards,
Vido.
HI, I am just starting out with the flashing of ROM's on my Telstra JasJam. I actually went to a Imate Ultimate 9502 and put the JasJam back in the box but after that failed and went back to Imate for repair, we all know how "quick" they are at repairs I pulled the JasJam out and went looking for a new 6.1 ROM for the JasJam.
I found CRC's ROM and flashed HardSPL before flashing, got CRC's 13.3 stable normal ROM on and all was going along great.
Issue I am having is when I go to the Telstra WAP site to access my Foxtel subscription I get a different telstra homepage. It is the old blue and white checker page that has icons down both sides. It is not the new homepage that has the icons with "free to browse" and "foxtel" tabs.
I installed the Telstra 5.5 cab and the My Place cab which didn't fix the issue. After a lot of looking around and reading I found the streaming URL for Foxtel and when I try to access it is says that my handset is not compat and to call Telstra.
It reminds me of the time back in WM5.0 when Foxtel first came out and the JasJam did not support it, it took an update to fix it.
So I am leaning towards a radio?? version issue maybe???
Can anybody help?
I PM'd CRC himself and he pointed me here.
Can anyone shed some light, had the same problems?
thanks in advance..........
I'm not sure of your exact issue, but it wouldn't be in the radio.
I'm guessing they might be using a proxy. My provider has a proxy to access their internal pages, and without it enabled it just never shows them. I'm on Cincinnati Bell.
Hopefully this will help you search, or someone using the same network will chime in.
Thanks for the reply.
Yeah Telstra do use a Proxy and you can set it either with their software package or via the network connections. I am doing this as without it you can't even get to the Telstra homepage.
Turn the proxy off and the Telstra homepage times out .....of course!!
But this is where my issue is, with the proxy on the homepage that loads is not the current one even though I am getting the http://wap.telstra.com/wap site via the "Telstra My Place"
Over night I flashed my spare JasJam, I purchased a JasJam off ebay for
"el-cheapo", its been abused but still works OK, and loaded the official WM6 on it. Put my SIM in and got straight to the telstra homepage where I can access the Foxtel website and the "free to browse" tab.
I can only assume that is has something to do with the radio.
Can somebody please explain the radio and how it works. I am struggling with this part as I am unable to find any good info on it.
cheers
The radio just handles the packets of information. It doesn't have anything to do with where the info comes from, or goes to.
Just like a different network card, or, network card firmware won't get you to a new web page.
I'm sure it's something to do with a network setting or proxy setting.
Hopefully someone on Telstra can chime in.
OK, so how do I understand 2 JasJam's with exactly the same settings via Proxy and network setup go to 2 different web pages?
I put WM6 on one and then insert my SIM, I get to the correct page when you browse the http://wap.telstra.com/wap and then I put CRC's ROM onto the other with WM6.1 and insert my SIM and then get to the incorrect site.
So I thought, as a wild guess, its the phone. So I did the opposite with flashing. I flashed the JasJam that had WM6 and was getting to the correct site with CRC's ROM and as I suspected I could not get to the correct site.
The error message tells me my phone is not compat with the service. I put the WM6 ROM onto the JasJam that could not get to the telstra WAP homepage and yep, it worked flawlessly.
It must be something to do with CRC's ROM, is there anyone else out there, PLEASE, that is on the NextG network and using CRC's 13.3 normal ROM and can get to the telstra WAP homepage that allows you access to Foxtel and the "free to browse" tabbed content???
Or anyone using one of CRC's ROM's, any version of WM6.1 that is working as it should?
Can anyone suggest a WM6.1 ROM that will work with Telstra Foxtel service?
Any help would be appreciated?
I know it all works on WM6.1 as I have, in the repair shop, a Ultimate 9502 that has no problems browsing the WAP site.
thanks again.........
Ahh, It might be something with the way the browser is reporting itself. That, I'm not sure how to fix. Might be able to use schaps advanced config to see what each of them are reporting, and try to make it match.
yeah I am unsure about that one. I installed Opera as well and get the same page.
This is definitely one for CRCinAU himself. I did PM him but he said to go to the forum. So far that hasn't been much help.
I searched for the other ROM you mentioned, schapp? I am not having much luck.
can you point me in the right direction for that, I'll give it a go and see what the differences are.
thanks for your replies. Seems that there are not many local users of the CRC 13.3 ROM on the Telstra network, or they don't use this feature and are unawares of it.
I ask again, if anybody can help with this one I would really appreciate it.
Can anyone tell me if they know of a WM6.1 ROM that is fully working on the Telstra NExtG network and able to use all the features provided by the "MyPlace" and WAP sites?
I cannot even look at any of the features on the WAP site, when you click on the icons to go to say, ringtones or movie info I get a web page error saying my hanset is not compatable. Very frustrating for such a lean, fast and app packed ROM!!!
cheers
Here is his xda dev post about it http://forum.xda-developers.com/showthread.php?t=418151 but the download link seems to be broken or is down at the moment.
Here is my copy of advanced config http://www.filedropper.com/advancedconfigurationtoolv33
all kinds of settings in there, also, you should be able to load advanced config from crc's device update(should come in crc's rom).
I think you will find your answer Here you need to change registry setting for compatibilty issue
Regards
Thanks that fixed it. Exactly the issue.
Its funny I looked at that string before and tried a few different options but nothing changed. Knowing the exact string did it!!
Thanks to everyone who replied and thanks to CRCinAU for a very nice ROM, which is now working as I want it to.
cheers
Hi all I've been a member here since my first HTC8525 and all of you have helped me tremendously. But today I believe I need to ask for help. I just recently purchased a T-mobile HTC Touchpro 2 and brought it back to Canada to run on the Rogers network. I have unlocked the phone and set up everything fine. My only problem is that I cannot change the MMS setting in the phone Tmob has locked them out. Could anyone point me in the right direction. I have searched the threads and to no avail. Any help at all is greatly appricated. Sorry if i am repeating earlier threads.
same issue here, im trying to change the setting on my tp2 but it is locked for changes, i cant even add a new setting.
i did the changes when i had my tilt 2 but here i can't any help please.
thanks in advance
sorry for posting it when the answer was already there. but anyway you can change some of the settings via registry.
hkey local machine/software/arcsoft mms ua/config/
hope it's helpfull
then what
what other steps do you take after that?
Unlocking the device via Hard SPL to accept other ROMs will allow you to flash any of a ton of ROMs for this device that allow editing of MMS settings. Most custom ROMs are faster, lighter, and generally prettier than the stock one. Otherwise, as I recall, you'll need the IP address from the cell network to change the MMS gateway in the registry. Good luck getting that from a carrier.